Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DELIGNIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Biocompatible organosolv fractionation via a novel alkaline lignin-first strategy towards lignocellulose valorization

Simultaneous valorization of both carbohydrate and lignin fractions in lignocellulose remains a great challenge. Herein, a novel lignin-first strategy using triethylene glycol (TEG) under alkaline conditions for effective biomass fractionation producing highly digestible carbohydrates and reactive lignin was developed. Delignification was over 80% and fermentable sugar yields were close to 90% after pretreatment at 90°C. The biocompatibility of TEG allowed direct enzymatic hydrolysis of the solid residue without washing, thus minimizing wastewater generation. Furthermore, the obtained lignin (TEGL) had an uncondensed structure with well-preserved β-O-4 linkage, leading to near-equal aromatic monomer yields compared to cellulolytic enzyme lignin after catalytic-free pyrolysis, demonstrating high valorization potential. Finally, the proposed TEG solvent system is promising for a green and sustainable biorefinery process to achieve the complete utilization of lignocellulose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The physiochemical alteration of flax fibers structuring components after different scouring and bleaching treatments

Scouring and bleaching are essential steps in flax yarn production; however, in many cases, these treatments have relatively low selectivity on non-cellulosic polysaccharides (NCPs) and lignin. Herein, the specific chemical properties of flax fibers through a variety of scouring and/or bleaching procedures are reviewed to understand their correlations with the mechanical and morphological characteristics. The hydrolysis behaviors of hemicellulose and lignin are different from those of cellulose during chlorine-alkali-oxygen (Cl-AO), enzyme-alkali-oxygen (EAO), and alkali-oxygen (AO) treatments, while the structural hemicellulose polysaccharides fractions were not affected by acid pretreatment followed by alkali scouring (AA) treatment. It was found that the unbleached AA treatment improved scouring efficiency to the greatest extent by decreasing 73.3 % of hemicellulose content and 59.8 % of lignin content compared to the untreated flax fibers and obtained the highest tensile strength (6.58 cN/dtex) and elongation (3.73 %). Delignification was more crucial on fiber tenacity and fineness than hemicellulose removal (R 2 = 0.71, 0.79 vs R 2 = 0.46, 0.61). Within the hemicellulose fractions, a corresponding beneficial relationship between the xylan (XYL) composition and flax fiber properties is presented. The correlation of GM and GGM contents in hemicellulose with flax fiber length was significant with R 2 value 0.97 and 0.99, respectively. This work provides insight into the hydrolysis behavior of hemicellulose and a basis for developing scouring and/or bleaching models that can predict fiber properties.

60 APPLIED LIFE SCIENCES↗

Multi-pass flow-through reductive catalytic fractionation

Reductive catalytic fractionation (RCF) is a promising lignin-first biorefining strategy that selectively extracts and depolymerizes lignin from whole biomass. Flow-through (FT)-RCF enables physical separation of the biomass and catalyst, but this process configuration typically operates at high solvent-to-biomass ratios. Here, we demonstrate multi-pass FT-RCF, wherein the lignin-enriched solvent obtained after an initial FT-RCF step is recycled and used in subsequent FT-RCF without intermediate lignin recovery. Multi-pass FT-RCF reduces the solvent-to-biomass ratio from 48 to 1.9 L/kg, which is a lower solvent loading than is accessible in batch reactors, without negative impacts on delignification and monomer yield with up to 12 wt % lignin in the solvent. Overall, this work demonstrates that solvent demand in RCF processes, which is a key cost and energy driver to enable this process at scale, can be reduced by recycling lignin oil between RCF reactions.

09 BIOMASS FUELS↗

Lignin’s Indispensable role in orchestrating seed stone formation: Insights from jujuba, peach and pear with future prospective on pitless fruits

A hard endocarp (i.e., stone) inside fruit is a characteristic of drupe fruits such as jujube, peach, mango, etc. Hard stone significantly affects the quality and downstream processing of fruits. The complex aromatic polymer lignin deposition in the secondary cell wall determines stone hardness. Lignin comprises phenylpropanoid units formed by hydroxycinnamoyl alcohol, which includes coniferyl, sinapyl, and p-coumaroyl alcohols. Lignin biosynthesis pathway involves a series of complex enzymatic reactions initiated from phenylalanine ammonia lyase and ends up polymerizing lignin monomers by laccase and peroxidase enzymes. Phytohormones, particularly auxin, gibberellins, and Ca²⁺ signaling, further modulate endocarp lignification by regulating transcriptional networks and lignin biosynthetic genes, thereby fine-tuning secondary cell wall thickening and stone hardness in drupe fruits. Lignin biosynthesis is controlled by both structural genes and transcriptional regulators. The structural genes encoding lignin biosynthetic enzymes include LAC12–1, PAL2, C4H, C3H, CSE, CCoAOMT, F5H, CAD, and PRX1. In addition, several transcription factors regulating secondary cell wall and lignin deposition, such as MYB24, bZIP48, and bZIP33 play key regulatory roles. Conversely, delignification or suppression of stone formation is associated with transcription factors (Pistillata, MYB32, FUL, and REPLUMLESS) and post-transcriptional regulators, including miR397a, miR31-3p, and miR8-5p. Accurate alteration in the expression of these genes will result in the attainment of stoneless fruits for cheap and hazel-free downstream processing.

Fruit endocarp↗

Nanoscale Examination of Chemical and Enzymatic Degradation of Plant Cell Walls

Lignocellulosic materials present the largest source of biomass for biotechnology and green energy. This study aimed at better understanding the cell wall disintegration mechanisms relevant for the biochemical conversion of biomass to carbohydrates. Herein, we examined nanoscale changes in cell wall structure and composition upon industrially relevant chemical and enzymatic treatments to achieve the desired level of breakdown. One treatment involved hydrogen peroxide and acetic acid to remove lignin. Another modification used the cellulase enzyme for cell wall degradation. Band excitation contact resonance atomic force microscopy was used to visualize and mechanically characterize cell wall layers. After cellulase treatments, we detected microcracks across the cell wall. Wet-chemical, Fourier-transform infrared and Raman spectroscopic analyses confirmed the removal of lignin and extractives through acid bleaching, while the enzymatic treatment minimally affected the biopolymer composition. Delignification resulted in cell wall delamination and reduced stiffness. In conclusion, X-ray diffraction revealed changes in cellulose structure and crystallinity.

Soini, Steven A. [Florida Atlantic Univ., Boca Rat↗

Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency

As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.

09 BIOMASS FUELS↗

Integrated Two-Stage Alkaline-Oxidative Pretreatment of Hybrid Poplar. Part 1: Impact of Alkaline Pre-Extraction Conditions on Process Performance and Lignin Properties

We previously demonstrated that a two-stage pretreatment comprising of an alkaline pre-extraction followed by a Cu-catalyzed alkaline–oxidative treatment is effective at pretreating hardwoods under relatively mild reaction conditions. In this work, we focus on characterizing how biomass source and reaction conditions used during the alkaline pre-extraction impact the subsequent processing stages as well as lignin yields and properties. Specifically, three hybrid poplars were subjected to the first stage alkaline pre-extraction under various conditions including differences in time (15–300 min), temperature (95–155 °C), and alkali loadings (50–200 mg NaOH/g biomass), and the impact on total mass solubilization, lignin recovery, and lignin purity was determined. Empirical correlations were developed between reaction conditions and mass solubilization and lignin recovery during the pre-extraction stage. For select conditions, lignin properties were assessed and include β-O-4 content determined by 13C NMR, molecular mass distributions as determined by gel permeation chromatography, and susceptibility to depolymerization to aromatic monomers using thioacidolysis and formic acid catalyzed depolymerization. We found alkaline pre-extraction performed at higher temperatures generated lignins exhibiting lower contamination by polysaccharides, lower aromatic monomer yields from depolymerization, lower molar masses, and lower β-O-4 contents relative to the lower temperature pre-extractions. Lastly, the pre-extracted biomass from select conditions was assessed for its response to the subsequent Cu-catalyzed alkaline–oxidative treatment and enzymatic hydrolysis. It was demonstrated that minor differences in delignification during pre-extraction have quantifiable impacts on the subsequent efficacy of the second stage of pretreatment and enzymatic hydrolysis with improved lignin removal during the first pre-extraction stage resulting in improved hydrolysis yields.

09 BIOMASS FUELS↗

Increasing the Carbohydrate Output of Bamboo Using a Combinatorial Pretreatment

Bamboo represents a family of highly lignified biomass with significant resistance to cellulolytic enzyme degradation, and typically, a severe thermochemical pretreatment is needed to overcome its recalcitrance for producing fermentable sugars. Combinatorial pretreatments with a low holding temperature and low alkali dosage were investigated in this study in an attempt to remove the impediments to the accessibility of bamboo cellulose to enzymes and enable the efficient conversion of hemicellulose. Upon autohydrolysis at 180 °C, more than half of the hemicellulose (~58%) was solubilized, contributing to further delignification in the subsequent dilute alkali extraction (DAE). The solubilized hemicellulose mainly existed in the form of soluble xylan, which, after a novel endo-β-1,4-xylanase hydrolysis, generated a large amount of xylo-oligosaccharides with the xylobiose and xylotriose proportion reaching 72.99%. After the fractionation with combinatorial pretreatments, cellulose and xylose enzymatic hydrolysis yields were 73.36 and 86.98%, respectively, representing increments of 22.42 and 43.15% compared with the sole autohydrolysis process. Fluorescence microscopy (FM) and confocal Raman microscopy (CRM) images revealed that these dramatic improvements were caused by the deconstruction of the bamboo cell walls, including separation of the adjacent cell walls, removal of hemicellulose and lignin, migration and redistribution of lignin, and the increased exposure of cellulose. In addition, lignin chemical structure variations during the combinatorial pretreatment were analyzed with gel permeation chromatography (GPC), 2D HSQC NMR, and 31 P NMR, and the correlation between the lignin structure and enzymatic hydrolysis efficiency was investigated. In summary, this study highlighted the application of combinatorial pretreatments to maximize the carbohydrate output of bamboo and unveiled their mechanism that enabled the high-efficiency utilization of bamboo.

09 BIOMASS FUELS↗

Investigation of a Lignin-Based Deep Eutectic Solvent Using p -Hydroxybenzoic Acid for Efficient Woody Biomass Conversion

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). In this paper, we first report an effective pretreatment of woody biomass using a novel hardwood lignin-based DES prepared from p -hydroxybenzoic acid (PB) and choline chloride (ChCl), which are used as the hydrogen bond donor and acceptor, respectively. The impacts of the ChCl-PB DES on structural properties and enzymatic hydrolysis of poplar wood were comprehensively evaluated. The performance of ChCl-PB DES was also compared with two other DESs with p -coumaric acid (PCA) and 4-hydroxybenzaldehyde (PHA) as the hydrogen bond donors, which have been successfully applied to herbaceous biomass conversion in previous studies. The results showed that hemicellulose and lignin were effectively fractionated during the proposed ChCl-PB DES pretreatment under a relatively mild temperature. The ChCl-PB DES pretreatment resulted in up to 69% of delignification, and the pretreated poplar residues had over 90% of glucose yield by a 72 h-enzymatic hydrolysis. Transformation of poplar biomass during the DES pretreatment was evaluated by gel permeation chromatography (GPC), two-dimensional heteronuclear single quantum coherence (2D-HSQC), and 31 P nuclear magnetic resonance (NMR) spectroscopies. The recovered lignin showed relatively high purity, narrow molecular weight distribution (PDI < 1.6), and relatively low molecular weight (~1400 g/mol for M w ). A sustainable process was achieved by recycling DES as well as the utilization of PB, which is a producible aromatic compound from hardwood lignin, for the proposed DES formation in the system. This study indicates that the proposed novel DES with a hardwood lignin-based PB compound is a promising pretreatment solvent to achieve an economically feasible biomass conversion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Chemical Design for Efficient Lignin Bioconversion

Here, lignin depolymerization mainly involves redox reactions relying on the effective electron transfer. Even though electron mediators were previously used for delignification of paper pulp, no study has established a bioprocess to fragment and solubilize the lignin with an effective laccase–mediator system, in particular, for subsequent microbial bioconversion. Efficient lignin depolymerization was achieved by screening proper electron mediators with laccase to attain a nearly 6-fold increase of kraft lignin solubility compared to the control kraft lignin without laccase treatment. Chemical analysis suggested the release of a low molecular weight fraction of kraft lignin into the solution phase. Moreover, NMR analysis revealed that an efficient enzyme–mediator system can promote the lignin degradation. More importantly, the fundamental mechanisms guided the development of an efficient lignin bioconversion process, where solubilized lignin from laccase–HBT treatment served as a superior substrate for bioconversion by Rhodococcus opacus PD630. The cell growth was increased by 10 6 fold, and the lipid titer reached 1.02 g/L. Overall, the study has manifested that an efficient enzyme–mediator–microbial system can be exploited to establish a bioprocess to solubilize lignin, cleave lignin linkages, modify the structure, and produce substrates amenable to bioconversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Lignin Streams during Bionic Liquid-Based Pretreatment from Grass, Hardwood, and Softwood

Delignification as a function of ionic liquid (IL) pretreatment has potential in terms of recovering and converting the fractionated lignin streams to renewable products. Renewable biogenic ionic liquids, or bionic liquids (eg. cholinium lysinate, ([Ch][Lys])), provide opportunities in terms of effective, economic and sustainable lignocellulosic biomass pretreatment. We have evaluated [Ch][Lys] pretreatment in terms of sugar and lignin yields for three different feedstocks: switchgrass, eucalyptus, and pine. Four lignin streams isolated during [Ch][Lys] pretreatment and enzymatic hydrolysis were comprehensively analyzed, tracking their changes in physical-chemical structures. We observed changes in major lignin linkages and lignin aromatics units (p-hydroxyphenyl (H), guaiacyl (G), and syringil (S)) that occurred during pretreatment. A compositional analysis of the different process streams and a comprehensive mass balance in conjunction with multiple analytical techniques (Nuclear Magnetic Resonance (NMR), Mass Spectroscopy, Fourier Transform Infrared Spectroscopy (FT-IR), Gel Permeation Chromatography (GPC)) is presented. Qualitative and quantitative analyses indicates that there are significantly more lignin-carbohydrate interactions for G-rich lignin in pine. The lignin removal and extent of lignin depolymerization for switchgrass and eucalyptus were higher than pine, and follows the order of switchgrass > eucalyptus > pine. The recovered lignin from pretreated liquid contained a lower relative amount of carbohydrate signals than raw biomass, indicating a high degree of dissociation of lignin carbohydrate complex (LCC) linkages for all samples analyzed. The insights gained from this work contribute to better understanding of physiochemical properties of lignin streams generated during [Ch][Lys] pretreatment, offering a starting point for lignin valorization strategies.

lignin, ionic liquids, NMR↗

Assessing the Facile Pretreatments of Bagasse for Efficient Enzymatic Conversion and Their Impacts on Structural and Chemical Properties

Here, novel and sustainable pretreatment approaches are desired to improve the techno-commercial feasibility of biorefineries in the future. In this study, 10 renewable deep eutectic solvents (DESs) were evaluated for their pretreatment efficiency at facile conditions with sugar cane bagasse as substrate and compared with conventional pretreatment approaches (dilute alkali, dilute acid, and ionic liquid (IL)) for lignin removal, saccharification yield, cellulose accessibility, crystallinity, and physiochemical properties. Although, the highest delignification was obtained with dilute alkali (59.7%) and choline chloride:lactic acid or ChCl:LA (50.6%), the maximum enzymatic conversion of 98.0% and 90.4% was observed with IL (1-butyl-3-methylimidazolium acetate) and ChCl:LA, respectively. uclear magnetic resonance analysis of ChCl:LA-derived lignin showed selective removal of guaiacyl lignin without condensation structure formation observed. Interestingly, unlike IL, the lignin was substantially depolymerized after ChCl:LA pretreatment as determined by gel permeation chromatography. Further, high compatibility of ChCl:LA with cellulase in comparison of IL with easy recyclability and recycling showed that DESs synthesized from a renewable resource are promising “green” solvents for future biorefinery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Nature of Cellulose Microfibrils

Ultrathin cellulose microfibril fractions were extracted from spruce wood powder using combined delignification, TEMPO-catalyzed oxidation, and sonication processes. Small-angle X-ray scattering of these microfibril fractions in a “dilute” aqueous suspension (concentration 0.077 wt %) revealed that their shape was in the form of nanostrip with 4 nm width and only about 0.5 nm thicknesses. We found that these dimensions were further confirmed by TEM and AFM measurements. The 0.5 nm thickness implied that the nanostrip could contain only a single layer of cellulose chains. At a higher concentration (0.15 wt %), SAXS analysis indicated that these nanostrips aggregated into a layered structure. The X-ray diffraction of samples collected at different preparation stages suggested that microfibrils were delaminated along the (110) planes from the Iβ cellulose crystals. Moreover, the degree of oxidation and solid-state 13 C NMR characterizations indicated that, in addition to the surface molecules, some inner molecules of microfibrils were also oxidized, facilitating the delamination into cellulose nanostrips.

59 BASIC BIOLOGICAL SCIENCES↗

Enhancing Hydrogen Production from Bioenergy Crops via Photoreforming

Photoreforming perennial bioenergy crops (willow, Miscanthus , and poplar) has the potential to produce H 2 with reduced environmental impacts. To understand the compositional effects of the biomass on the average rate of H 2 production over the first 30 min of reaction ( r H 2 ), the r H 2 values of model biomass component (i.e., cellulose, hemicellulose, and lignin) mixtures were compared with those from the raw biomass. The higher cellulose or hemicellulose content in multicomponent mixtures resulted in higher r H 2 , whereas lignin reduced the hydrogen production rate. However, with raw biomass, the ratio of biomass components alone did not determine the r H 2 via photoreforming, with rates of hydrogen production for different varieties of willow ranging between 1.9 μmol h -1 and 12.3 μmol h -1 , 11.8 μmol h -1 for a poplar, and 6.8 μmol h -1 for a miscanthus biomass. In addition, comparable r H 2 values of raw poplar and its extracted cellulose via an IonoSolv treatment indicated the possibility of using raw biomass materials without delignification for generating H 2 via photoreforming. Importantly, r H 2 was positively correlated with the interaction between water and the biomass, as assessed by NMR relaxation via an examination of the T 1 /T 2 ratio. A stronger water-biomass interaction resulted in a higher r H 2 . Genetic modification of biomass has been suggested as a putative way to improve the r H 2 of biomass with an enhanced interaction with water. This research enhances the understanding of factors influencing H 2 production from lignocellulosic biomass by photoreforming and supports the breeding and management of perennial biomass crops to maximize H 2 yields while minimizing land area requirements.

biomass↗

Lignin Deoxygenation for the Production of Sustainable Aviation Fuel Blendstocks

Lignin is an abundant source of renewable aromatics that has long been targeted for valorization. Traditionally, the inherent heterogeneity and reactivity of lignin has relegated it to direct combustion, but its higher energy density compared with polysaccharides makes it an ideal candidate for biofuel production. This Review critically assesses lignin's potential as a substrate for sustainable aviation fuel blendstocks. Lignin can generate the necessary cyclic compounds for a fully renewable, sustainable aviation fuel when integrated with current paraffinic blends and can meet the current demand 2.5 times over. Using an energy-centric analysis, we show that lignin conversion technologies have the near-term potential to match the enthalpic yields of existing commercial sustainable aviation fuel production processes. Key factors influencing the viability of technologies for converting lignin to sustainable aviation fuel include lignin structure, delignification extent, depolymerization performance, and the development of stable and tunable deoxygenation catalysts.

09 BIOMASS FUELS↗

Unique low-molecular-weight lignin with high purity extracted from wood by deep eutectic solvents (DES): a source of lignin for valorization

This paper reports a new method of applying Deep Eutectic Solvents (DES) for extracting lignin from woody biomass with high yield and high purity. DES mixtures prepared from Choline Chloride (ChCl) and four hydrogen-bond donors–acetic acid, lactic acid, levulinic acid and glycerol–were evaluated for treatment of hardwood (poplar) and softwood (D. fir). It was found that these DES treatments can selectively extract a significant amount of lignin from wood with high yields: 78% from poplar and 58% from D. fir. The extracted lignin has high purity (95%) with unique structural properties. We discover that DES can selectively cleave ether linkages in wood lignin and facilitate lignin removal from wood. The mechanism of DES cleavage of ether bonds between phenylpropane units was investigated. The results from this study demonstrate that DES is a promising solvent for wood delignification and the production of a new source of lignin with promising potential applications.

Alvarez-Vasco, Carlos↗

Diol pretreatment to fractionate a reactive lignin in lignocellulosic biomass biorefineries

Lignin-first fractionation has become a new biorefinery target to obtain valuable lignin monomers toward the complete utilization of lignocellulosic biomass, but increasing delignification through conventional pretreatment approaches often affects the structural integrity of the dissociated lignin. We discovered a new reactive lignin with a great solvent solubility and preserved β-O-4 linkages from eucalyptus after a modified organosolv pretreatment using 1,4-butanediol (1,4-BDO). Unlike conventional organosolv pretreatment using ethanol, lignin deposition was not observed in 1,4-BDO pretreatment. Similarly, 2D HSQC NMR analysis revealed that the residual lignin obtained from 1,4-BDO pretreated eucalypts contained a relatively higher amount of β-O-4 interunit linkages, indicating its higher integrity than ethanol pretreated lignin. This result agreed with the lower content of phenolic hydroxyl groups in dissolved lignin via 31 P NMR analysis. With increasing pretreatment severity, the amount of aliphatic hydroxyl groups decreased in ethanol pretreated lignin while it remained at a higher level in 1,4-BDO pretreated lignin. These results suggested that 1,4-BDO quenched the benzyl carbocation intermediate and formed ether linkages with a hydroxyl tail at the α position of the lignin. Solubility tests revealed that grafting aliphatic hydroxyl groups on 1,4-BDO lignin increased its dissolution. This phenomenon was further demonstrated for four different diols with similar structures. Likewise, more than 90% cellulose conversion was obtained for all the diol pretreated eucalyptus after 48 h of enzymatic hydrolysis with cellulase at a loading of 7.5 FPU per gram of glucan. Diol pretreatment thus offers a promising reaction pathway to coincide with three pillars of biorefinery for lignin fractionation, lignin structural integrity, and cellulose hydrolysis.

09 BIOMASS FUELS↗

Plasma technology for lignocellulosic biomass conversion toward an electrified biorefinery

Lignocellulosic biomass conversion to renewable, carbon-neutral materials, fuels, and chemicals is the cornerstone of the transition to a sustainable future bioeconomy. Green energy in the form of electricity needs to be coupled with or substitute conventional thermally driven processes to realize small-scale, economically viable and environmentally friendly biorefineries. Gas discharge plasmas enable the conversion of renewable electric energy, supplied in the form of an electric field, to chemical energy through the formation of a highly reactive environment that can induce several transformations related to agricultural waste valorization processes. Herein, we review the application of plasma technology to lignocellulosic biomass upgrade, aiming to provide the scientific background and technical challenges in this rapidly emerging research field. To bridge the gap between plasma science and biomass valorization technologies, we initially present the technical aspects of plasma reactors related to biomass processing and further discuss the advances in plasma processing for each biomass conversion technology, providing insights into the related plasma chemistry and interaction mechanisms. Here, we first focus on the low and medium-temperature biomass conversion processes, including biomass pretreatment and delignification to promote enzyme or acid-catalyzed hydrolysis to sugars and biomass liquefaction using plasma electrolysis. Then we discuss the high and very high-temperature conversion processes, such as plasma-assisted pyrolysis and gasification to syngas and plasma application to tar removal, combustion, and vitrification. Overall, this review provides knowledge at the interface of plasma science and biomass conversion technology to promote the interaction between the individual communities, which is crucial for the further advancement of the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗