Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CubeSat Technology Demonstration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

The ISARA Mission – Flight Demonstration of a High Gain Ka-Band Antenna for 100Mbps Telecom

The NASA sponsored ISARA (Integrated Solar Array and Reflectarray Antenna) mission successfully demonstrated a 100 Mbps Ka-band CubeSat communications capability. The enabling technology is a high gain reflectarray antenna integrated into a modified Pumpkin “Turkey Tail” solar array which wraps around the spacecraft body, essentially requiring near zero volume to accommodate. A simple low gain feed is used to distribute RF power to the reflectarray through free space. The 0.5kg ISARA antenna mass is compatible with the requirements of a 3U (10x10x10 cm3) spacecraft. The ISARA mission validated this approach in a flight technology demonstration. A unique on-orbit measurement system provided accurate measurement of the antenna gain from space. This system demonstrated 100Mbps downlink data rate capability using a relatively simple ground station with a 70cm parabolic reflector antenna. The spacecraft also verified ISARA solar panel output power and demonstrated the operational capability to accurately point the antenna to a Ka-band ground station, a key requirement for a telecom system. ISARA achieved a number of technological firsts. It is believed to be the first reflectarray antenna flown in space, first high gain antenna integrated with solar panels, first calibrated reflectarray antenna gain and pattern measurement performed from space and the first 3U CubeSat to demonstrate 100 Mbps using a small, low-cost ground station.

Martin, Jerami M.↗
NASA NTRS2018

CubeSat Laser Infrared CrosslinK

The CubeSat Laser Infrared CrosslinK (CLICK) mission will demonstrate technology to advance the state of the art in intersatellite communications for small spacecraft. The primary objective of the mission is an on-orbit demonstration of full-duplex (send and receive) laser, also called optical communication, crosslink between two six-unit(6U) small satellites that range in distance between 15 and 360 miles (25 - 580 kilometers) apart at data rates greater than 20 megabits per second (Mbps). The mission will also demonstrate precision satellite-to-satellite clock synchronization and ranging at the 10 cm level. Miniaturized optical transceivers capable of both transmitting and receiving laser communications will form a communication crosslink between the two satellites with their alignment supported with a new fine pointing capability. The miniature optical transceivers are an improvement over radio frequency (RF) technology due to the power efficiency of lasercom high data rate transmission, which lessens the impact on the small platform's already severe constraints on size, weight and power.

Mayer, David J.↗
NASA NTRS2019

CubeSat Laser Infrared CrosslinK

The CubeSat Laser Infrared CrosslinK (CLICK) mission will demonstrate technology to advance the state of the art in communications between small spacecraft as well as the capability to gauge their relative distance and location. CLICK is comprised of two sequential missions. The first mission, CLICK A, is a risk reduction mission that will test out elements of the optical (laser) communications with a single 3-unit (3U) spacecraft. The key objective of this risk reduction testing is to demonstrate the fine steering mirror control system's high precision pointing performance which enables the use of a lower power laser in CLICK B/C. The goal of CLICK B/C, the second mission, is to demonstrate full-duplex (send and receive) optical communication crosslink between two 3U small spacecraft, in low-Earth-orbit, at distances between 15 and 360 miles (25 - 580 kilometres) apart at data rates greater than 20 Mbps.

precision ranging↗
NASA NTRS2024

DiskSat: A Two-Dimensional, High Power, High Aperture, Maneuverable Spacecraft

NASA is funding designers of small spacecraft at The Aerospace Corporation in El Segundo, California, to develop a technology demonstration of an evolutionary alternative to the CubeSat standard that maintains the benefits of that platform while overcoming key limitations. DiskSat is a plate-shaped satellite 40 inches in diameter and an inch thick that could offer more power and surface area for instruments, providing more opportunities for NASA to expand upon target mission objectives for small spacecraft.

Julianna L Fishman↗
NASA NTRS2018

Iodine Propellant Feed System Flow Modeling

The use of solid iodine as a propellant in Hall-effect thrusters (HETs) is currently being investigated for small-satellite applications. CubeSats offer an inexpensive mode of access to space; however, they currently lack significant propulsion capability. A high specific impulse (I (sub sp)) propulsion system would permit a significant change in velocity, delta v, to be imparted for orbital maintenance, transfers, or de-orbit maneuvers. An electric propulsion system that uses iodine as a propellant has a number of advantages. It has an exceptionally high rho times I (sub sp) figure of merit (density multiplied by the specific impulse), meaning that it can achieve a large total delta v with a relatively low combination of propellant mass and propellant tank volume. Also, the propellant feed system operates at low pressures (a few psia at most), as opposed to the use of super-critical xenon stored at very high pressure. Low pressure operation can lower system mass while greatly reducing the risk of propellant tank rupture, making low pressure a vitally important property for propellants on secondary payloads like CubeSats, where risks must be minimized. The iSAT mission aims to demonstrate iodine-fed HET technology, flying it in space onboard a 12U 912-unit) CubeSat. In the iSAT propellant feed system (PFS), solid iodine is sublimed through heating to produce gaseous propellant that is conducted through tubing to the thruster and cathode. The sublimation process is governed by the iodine (I2) vapor pressure, which is shown as a function of temperature in figure 1. As gaseous I2 flows out of the tank, the gas pressure in the volume containing the solid iodine propellant is reduced until a balance between the flow of iodine out of the tank and the sublimation rate of solid iodine at the equilibrium gas pressure and chosen tank temperature is reached.

Martin, A. K.↗
NASA NTRSDate not supplied

Windform® XT 2.0 Use as 3U CubeSat Primary Structure

CubeSats provide a platform for small-scale space research and technology demonstration at reduced complexity, cost, and development time. These advantages drove the NASA Langley Research Center (LaRC) to develop and launch the GPX2 3U CubeSat to explore the viability of using Commercial Off-The-Shelf (COTS) differential GPS (dGPS) in low earth orbit. To reduce manufacturing costs and increase design flexibility, the project chose additive manufactured Windform® XT 2.0 as the primary bus material rather than traditional subtractive manufactured (milled) metal. The bus is a two-part, Selective Laser Sintered, 3D-print structure consisting of a single-piece, five-walled chassis and single-walled cover. The bus was specially designed to allow the project to accommodate the payload electronics stack as well as antennas, receivers, and deployable mechanisms. By using an additive manufactured solution, LaRC was able to design in features unrealizable through traditional milling, with a lead-time of roughly two weeks. In comparison, traditional subtractive manufacturing limits geometry options due to toolpath reach and bus construction would have required multiple components for each wall. This would have resulted in a more costly, longer lead-time article with more joints, fasteners, and complexity with a commensurate increase in overall mass. A number of lessons-learned were captured during the design, analysis, and testing of the GPX2 CubeSat covering thermal and structural analysis, vibration modeling, and geometric tolerancing. Additionally, a variety of material testing and verification were performed before and during spacecraft design and integration to assure the suitability of Windform® XT 2.0 for the launch and mission environments. This article provides the highlights of designing and testing the GPX2 bus.

CubeSat↗
NASA NTRS2015

The Iodine Satellite (iSat) Project Development Towards Critical Design Review

Despite the prevalence of small satellites in recent years, the systems flown to date have very limited propulsion capability. SmallSats are typically secondary payloads and have significant constraints for volume, mass, and power in addition to limitations on the use of hazardous propellants or stored energy. These constraints limit the options for SmallSat maneuverability. NASA's Space Technology Mission Directorate approved the iodine Satellite flight project for a rapid demonstration of iodine Hall thruster technology in a 12U (cubesat units) configuration under the Small Spacecraft Technology Program. The mission is a partnership between NASA MSFC, NASA GRC, and Busek Co, Inc., with the Air Force supporting the propulsion technology maturation. The team is working towards the critical design review in the final design and fabrication phase of the project. The current design shows positive technical performance margins in all areas. The iSat project is planned for launch readiness in the spring of 2017.

Dankanich, John W.↗
NASA NTRS2016

Pathfinder Technology Demonstrator: GlobalStar Testing and Results

The communications subsystem of a spacecraft is typically a SWaP (size, weight, and power) intensive subsystem in a SWaP constrained environment such as a CubeSat. Use of a satellite-based communication system, such as GlobalStars duplex GSP-1720 radio is a low SWaP potentially game-changing low-cost communication subsystem solution that was evaluated for feasibility for the NASA Pathfinder Technology Demonstrator (PTD) project. The PTD project is a series of 6U CubeSat missions to flight demonstrate and characterize novel small satellite payloads in low Earth orbit. GlobalStar is a low Earth orbit satellite constellation for satellite phone and low-speed data communications, and the GSP-1720 is their single board duplex radio most commonly used in satellite phones and shipment tracking devices. The PTD project tested the GSP-1720 to characterize its viability for flight using NASA GEVS (General Environmental Verification Standard) vibration and thermal vacuum levels, as well as testing the uplink-downlink connectivity, data throughput, and file transfer capabilities. This presentation will present the results of the environmental and capability testing of the GSP-1720 performed at NASA Ames Research Center, as well as the viability for CubeSat use in LEO.

satellite communication↗
NASA NTRS2023

PY4 Four-CubeSat Swarm of PyCubed-Based Spacecraft

PY4 is a low-cost, rapid-turn-around, four-satellite technology demonstration based on the open-source PyCubed avionics framework. PyCubed is an open-source, radiation-tested CubeSat avionics platform that integrates power, computing, communication, and attitude determination and control functionality into a single low-cost module programmable entirely in the programming language Python.

Jan Michael Stupl↗
NASA NTRS2019

IceCube: Spaceflight Demonstration of 883-GHz Cloud Radiometer for Future Science

Cloud ice play important roles in Earth’s climate and weather systems through their interactions with atmospheric radiation, dynamics, energy and precipitation processes. Submillimeter (submm) wave remote sensing at 200-1000 GHz is able to provide the sensitivity not covered by visible (VIS)/infrared (IR) and low-frequency microwave (MW) sensors (10-183 GHz), and measure cloud ice in the middle-to-upper troposphere. The IceCube 883-GHz cloud radiometer is the latest of NASA’s efforts to advance the technology readiness level (TRL) of submm-wave receiver technology for future compact, low-cost implementation of Earth observing systems. Emerging CubeSat opportunities allow a fast-track development and spaceflight demonstration of IceCube on a 3-U CubeSat. Funded by NASA’s In-Space Validation of Earth Science Technologies (InVEST) program and Science Mission Directorate (SMD), IceCube is the first CubeSat developed and flown by Goddard Space Flight Center (GSFC) in 2.5 years, using commercial off-the-shelf (COTS) components and subsystems. It was successfully released from International Space Station (ISS) in May 2017, acquired 15-month science data and produced the first global map of the 883-GHz cloud ice. It achieved all mission objectives and provided a pathway for future cost-effective cloud observations from CubeSat constellation.

Submm-wave remote sensing↗
NASA NTRSDate not supplied

R5-S2 and R5-S4 Preliminary On-Orbit Performance

The Realizing Rapid, Reduced-cost high-Risk Research (R5) project is a series of CubeSats that are intended to rapidly and affordably enable technology demonstrations in Low Earth Orbit (LEO). By accelerating the on orbit demonstration of technologies, it’s hoped that NASA programs and others will be able to infuse them more quickly and affordably. R5 is using an incremental development philosophy, where each spacecraft will feature improved performance over the previous. Each evolution of the spacecraft bus will be suitable for a variety of payloads. While each spacecraft will be built around a primary payload and mission, the intent is to then add on as many secondary payloads and objectives as possible.

Sam Pedrotty↗
NASA NTRS2012

Interplanetary CubeSats: Opening the Solar System to a Broad Community at Lower Cost

Interplanetary CubeSats could enable small, low-cost missions beyond low Earth orbit. This class is defined by mass < ~ 10 kg, cost < $30 M, and durations up to 5 years. Over the coming decade, a stretch of each of six distinct technology areas, creating one overarching architecture, could enable comparatively low-cost Solar System exploration missions with capabilities far beyond those demonstrated in small satellites to date. The six technology areas are: (1) CubeSat electronics and subsystems extended to operate in the interplanetary environment, especially radiation and duration of operation; (2) Optical telecommunications to enable very small, low-power uplink/downlink over interplanetary distances; (3) Solar sail propulsion to enable high !V maneuvering using no propellant; (4) Navigation of the Interplanetary Superhighway to enable multiple destinations over reasonable mission durations using achievable !V; (5) Small, highly capable instrumentation enabling acquisition of high-quality scientific and exploration information; and (6) Onboard storage and processing of raw instrument data and navigation information to enable maximum utility of uplink and downlink telecom capacity, and minimal operations staffing. The NASA Innovative Advanced Concepts (NIAC) program in 2011 selected Interplanetary CubeSats for further investigation, some results of which are reported here for Phase 1.

Staehle, Robert L.↗
NASA NTRS2022

Starling Animation

NASA’s Starling mission is advancing the readiness of various technologies for cooperative groups of spacecraft – also known as distributed missions, clusters, or swarms. Starling will demonstrate technologies to enable multipoint science data collection by several small spacecraft flying in swarms. The six-month mission will use four CubeSats in low-Earth orbit to test four technologies that let spacecraft operate in a synchronized manner without resources from the ground. The technologies will advance the following capabilities. • Network Communication • Cluster Flight Control • Relative navigation • Distributed Spacecraft Autonomy The Starling mission will test whether the technologies work as expected, what their limitations are, and what developments are still needed for CubeSat swarms to be successful. This animation illustrates Starling mission operations, offering an overview of each technology being demonstrated.

Howard N Cannon↗
NASA NTRS2015

Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate. This paper will provide a brief status of the pre-InVEST CubeSats, and discuss the development and status of the InVEST program. Figure

Earth Science↗
NASA NTRSDate not supplied

IceCube: Demonstration of an 883 GHz Radiometer for Ice Cloud Remote Sensing

IceCube was a technology demonstration of an 883 GHz heterodyne radiometer on a 3U CubeSat for ice cloud characterization. The project was a collaboration between Goddard Space Flight Center, Virginia Diodes Inc., and Wallops Flight Facility. IceCube was launched to the International Space Station (ISS) in April 2017, and was deployed to the orbit in May 2017. The radiometer measured ice cloud emissions from an ISS orbit for over 15 months. IceCube generated the first 883 GHz cloud map over a large operation temperature range of (5 ºC—37 ºC). Cloud ice plays a major role in the cloud precipitation process and Earth’s energy budget. Ice clouds are used in global circulation models as tuning parameters to achieve model agreement with observation at the top of the atmosphere in the radiation budget and at the bottom for precipitation, however, due to a lack of accurate ice cloud measurements large uncertainties exist in these models. Submillimeter wave remote sensing is capable of addressing this issue by measuring cloud ice mass and microphysical properties in the middle-to-upper troposphere. This fills the sensitivity gap not covered by the visible/infrared and microwave sensors [1]. The goal of IceCube was to increase the TRL of a heterodyne 883 GHz radiometer (using commercial parts) from 5 to 7 by validating the performance in a relevant spaceflight environment. The design of the radiometer was driven by frequency of operation, bandwidth, calibration, available power, and thermal environment requirements. The design included a 15 mm aperture off-axis parabolic reflector with a Potter feed horn, an 883 GHz 2nd-harmonic mixer that is fed by a local oscillator chain with a 24.3 GHz dielectric resonator (MLA), followed by a 6 GHz bandwidth centered at 9 GHz intermediate frequency assembly (IFA), receiver interface card, and power distribution unit. The IFA included an internal noise diode calibration to separate the MLA performance from the rest of the system. For this the radiometer had four operational states: antenna, antenna + noise, reference, and reference + noise; each state’s duration was 10 ms. The total power dissipation of the instrument was 5.6 W. The spacecraft had spinning capabilities to provide a cold sky view for calibration. We present the instrument design, ground test results, challenges, and highlight some of the flight measurements.

N Ehsan↗
NASA NTRS2014

Modular Pulsed Plasma Electric Propulsion System for Cubesats

Current capabilities of CubeSats must be improved in order to perform more ambitious missions. Electric propulsion systems will play a key role due to their large specific impulse. Compared to other propulsion alternatives, their simplicity allows an easier miniaturization and manufacturing of autonomous modules into the nano and pico-satellite platform. Pulsed Plasma Thrusters (PPTs) appear as one of the most promising technologies for the near term. The utilization of solid and non-volatile propellants, their low power requirements and their proven reliability in the large scale make them great candidates for rapid implementation. The main challenges are the integration and miniaturization of all the electronic circuitry into a printed circuit board (PCB) that can satisfy the strict requirements that CubeSats present. NASA Ames and the George Washington University have demonstrated functionality and control of three discrete Micro-Cathode Arc Thrusters (CAT) using a bench top configuration that was compatible with the ARC PhoneSat Bus. This demonstration was successfully conducted in a vaccum chamber at the ARC Environmental Test Laboratory. A new effort will integrate a low power Plasma Processing Unit and two plasma thrusters onto a single printed circuit board that will utilize less than 13 U of Bus volume. The target design will be optimized for the accommodation into the PhoneSatEDISON Demonstration of SmallSatellite Networks (EDSN) bus as it uses the same software interface application, which was demonstrated in the previous task. This paper describes the design, integration and architecture of the proposed propulsion subsystem for a planned Technology Demonstration Mission. In addition, a general review of the Pulsed Plasma technology available for CubeSats is presented in order to assess the necessary challenges to overcome further development.

PCB↗
NASA NTRS2015

IceCube: CubeSat 883-GHz Radiometry for Future Ice Cloud Remote Sensing

Ice clouds play a key role in the Earth's radiation budget, mostly through their strong regulation of infrared radiation exchange. Accurate observations of global cloud ice and its distribution have been a challenge from space, and require good instrument sensitivities to both cloud mass and microphysical properties. Despite great advances from recent spaceborne radar and passive sensors, uncertainty of current ice water path (IWP) measurements is still not better than a factor of 2. Submillimeter (submm) wave remote sensing offers great potential for improving cloud ice measurements, with simultaneous retrievals of cloud ice and its microphysical properties. The IceCube project is to enable this cloud ice remote sensing capability in future missions, by raising 874-GHz receiver technology TRL from 5 to 7 in a spaceflight demonstration on 3-U CubeSat in a low Earth orbit (LEO) environment. The NASAs Goddard Space Flight Center (GSFC) is partnering with Virginia Diodes Inc (VDI) on the 874-GHz receiver through its Vector Network Analyzer (VNA) extender module product line, to develop an instrument with precision of 0.2 K over 1-second integration and accuracy of 2.0 K or better. IceCube is scheduled to launch to and subsequent release from the International Space Station (ISS) in mid-2016 for nominal operation of 28 plus days. We will present the updated design of the payload and spacecraft systems, as well as the operation concept. We will also show the simulated 874-GHz radiances from the ISS orbits and cloud scattering signals as expected for the IceCube cloud radiometer.

cloud ice remote sensing↗
NASA NTRS2010

Development of a Solar Array Drive Assembly for CubeSat

Small satellites and in particular CubeSats, have increasingly become more viable as platforms for payloads typically requiring much larger bus structures. As advances in technology make payloads and instruments for space missions smaller, lighter and more power efficient, a niche market is emerging from the university community to perform rapidly developed, low-cost missions on very small spacecraft - micro, nano, and picosatellites. In just the last few years, imaging, biological and new technology demonstration missions have been either proposed or have flown using variations of the CubeSat structure as a basis. As these missions have become more complex, and the CubeSat standard has increased in both size (number of cubes) and mass, available power has become an issue. Body-mounted solar cells provide a minimal amount of power; deployable arrays improve on that baseline but are still limited. To truly achieve maximum power, deployed tracked arrays are necessary. To this end, Honeybee Robotics Spacecraft Mechanisms Corporation, along with MMA of Nederland Colorado, has developed a solar array drive assembly (SADA) and deployable solar arrays specifically for CubeSat missions. In this paper, we discuss the development of the SADA.

Passaretti, Mike↗