SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
By leveraging dynamic phosphodiester bonds in 3D printed foams, enhanced expansion and strengths are achieved. Dynamic bonds enable higher crosslinking density and improved energy dissipation, resulting in versatile and high-performance materials.
Fluorocarbon-based rubber (FKM) compounds are typically utilized in the aeronautical industry due to its exceptional chemical and thermal resistance and recently has drawn significant interest from the hydrogen community for various hydrogen applications, but there exists little data evaluating its hydrogen compatibility. In this paper, a formulated FKM compound was exposed to ultrahigh hydrogen pressure (90 MPa) and analyzed by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy and crosslinking densities by solvent swelling measurement. ATR-FTIR spectroscopic data demonstrated that high-pressure hydrogen not only caused cleavages in polymer backbone and cross linkages, but also induced additional degradation of FKM compounds by breaking intermolecular hydrogen bonding between carboxylic acids, which were produced during rubber molding and post curing processes. This hydrogen pressure-driven degradation was significantly higher towards the core of the material than at the surface due to its weaker bonding between polymers and fillers.
Blending polymers produces brittle materials due to macrophase separation and poor interfacial adhesion, which is exemplified by mixtures of polyolefins. This presents a formidable challenge for the mechanical recycling of mixed plastic waste. Here, we demonstrate that dynamic covalent crosslinking of immiscible polyolefin blends creates macrophase separated co-continuous architectures, yet they display excellent mechanical properties, which challenges the conventional wisdom regarding morphology-property relationships in polymer blend compatibilization. We find that the position and orientation of dynamic crosslinks and their influence on crystallinity are key to understanding the structure-morphology-property relationships. In particular, high-resolution microscopy imaging reveals alignment of crystallite planes with strong orientational preference, particularly at polymer-polymer interfaces, which contribute to material performance. We further demonstrate that changes in crosslinker density and valency allow the properties of binary and ternary polyolefin blends to be tuned in a modular fashion.
3D printable silicones can be designed with varying crosslink density, network structures, and types of reinforcing additives. Within this design space, one may tailor the uncured material’s rheology and mechanical response to access a wide range of potential applications. However, printable, low modulus silicones, particularly those applicable to direct ink write, are underreported in published literature. To address the need for higher performance, low modulus silicones with demonstrated printability, a new set of ca. 20–50 Shore A hardness silicone elastomers exhibiting ca. 7 MPa ultimate tensile strength and ca. 400–1200% elongation at break is presented. Mechanical properties were analyzed, providing insight to the effects of formulation constituents on mechanical properties. Cyclic mechanical testing of the silicone formulations was also performed, and the energy loss and permanent set throughout cycling were determined. In conclusion, printed structures demonstrate the feasibility of these new silicones as durable frameworks for novel soft device applications.
Polysiloxane foams utilized for stockpile applications experience changes over time induced by exposure to thermal, radiative, and mechanical stresses. The interplay of these stresses can lead to chemical and/or physical changes in the polymer, such as compression set and material degradation over time. Understanding the mechanisms of material aging and identifying material degradation prior to failure are critical in maintaining the integrity of the nuclear stockpile. Our prior work using solid-state NMR spectroscopy has shown that we can observe signatures of thermal, radiative, and mechanical aging of silicone elastomers using differences in NMR parameters such as relaxation (T1 and T2). However, most of our measurements have been on bulk samples and have only provided an average aging behavior of each sample. Here, we have used magnetic resonance imaging (MRI) to provide relaxation-weighted images that are a metric of structural heterogeneity (crosslink density) in polymers across multiple length scales. In addition, the larger sample size that can be accommodated in animal MRI scanners has the potential to make the technique adaptable to detecting heterogeneities in whole parts.
Properties of polymer for conformal coating for electronic circuitry are described. Nitroso fluorocarbon polymers were selected for application. Chemical reactions for production of polymers are discussed. Technique allows regulation of crosslink densities, molecular weight, and viscosity.
Three polyfunctional amines were synthesized. Polyimide films containing varying amounts of the amine crosslinking agents were prepared. Their thermomechanical properties were compared with those of control film samples prepared from difunctional amines. The effect of crosslink density on isothermal weight loss, polymer softening, and glass transition temperature is discussed.
The potential of high temperature resistant polymers such as polyimides (PI) and polyphenylquinoxalines (PPQ) as matrix resins in fiber-reinforced composites has not been fully realized to date. One of the problems associated with these resins is that they exhibit creep, or thermoplastic yielding under load at temperatures approaching 316 C (600 F). The purpose of this investigation was to further reduce thermoplastic behavior of polyimide resins by substituting a controlled amount of the diamine monomer with crosslinking agents having a higher amine functionality. The knowledge gained from a study of the thermomechanical properties of the crosslinked resins would then be used in the fabrication of fiber-reinforced polyimide composites. This report describes the synthesis and characterization of three new polyfunctional amines. Polyimide films containing varying amounts of the cross-linking agents were prepared, and their properties compared with those of control samples prepared with difunctional amines. The effect of crosslink density on isothermal weight loss, polymer softening, and glass transition temperatures is discussed.
Both the investigation and the representation of the stress-strain response (including rupture) of gum and filled elastomers can be based on a simple functional statement. Internally consistent experiments are used to sort out the effects of time, temperature, strain and crosslink density on gum rubbers. All effects are readily correlated and shown to be essentially independent of the elastomer when considered in terms of non-dimensionalized stress, strain and time. A semiquantitative molecular theory is developed to explain this result. The introduction of fillers modifies the response, but, guided by the framework thus provided, their effects can be readily accounted for.
Heat-aging studies were conducted on fluororubber (copolymers of vinylidene fluoride and perfluoropropylene) using N,N-dicinnamylidene-1,6-hexanediamine, a Schiff's base of 1,6-hexanediamine, and MgO as acid acceptor. The principal technique employed was chemical stress relaxation for determining network changes brought about in the heat-aged fluororubber. This technique was backed up by swelling measurements, gel permeation chromatography, and IR spectroscopy. Stress relaxation curves are plotted for a wide range of variation in parameters (time, crosslinking density, state of curing, temperature, intermittent and continuous relaxation).
The use of reduced variables to account for the time-temperature dependence of the relaxation modulus is a standard and universally adopted technique in the stress analysis of solid propellant grains. Recent work has suggested that the reduced variable technique can also be used to account for the dependence of the relaxation modulus on the crosslink density of an elastomer system. By combining variables, it is now possible to determine the relaxation modulus as a function of both mechanical and chemical parameters over a long period of time. The problems involved, the pitfalls to be avoided, and suggested techniques to be used in acquiring data are discussed.
Styrene-butadiene materials with varying crosslink densities are analyzed through use of a strain energy function of the type introduced by Valanis and Landel (1967). A form of the strain energy function derived from strip biaxial tests proves to be accurate when checked against uniaxial and other biaxial test results.
Tensile strength and fracture toughness of castings of the hydantoin resins cured with methylenedianiline are significantly higher than MY 720 control castings. Water absorption of an ethyl, amyl hydantoin formulation is 2.1 percent at equilibrium and Tg's are about 160 C, approximately 15 deg below the final cure temperature. Two series of urethane and ester-extended hydantoin epoxy resins were synthesized to determine the effect of crosslink density and functional groups on properties. Castings cured with methylenedianiline or with hexahydrophthalic anhydride were made from these compounds and evaluated. The glass transition temperatures, tensile strengths and moduli, and fracture toughness values were all much lower than that of the simple hydantoin epoxy resins. Using a methylene bishydantoin epoxy with a more rigid structure gave brittle, low-energy fractures, while a more flexible, ethoxy-extended hydantoin epoxy resin gave a very low Tg.
An improved coating of gasification catalyst for carbon-graphite fibers is provided comprising a mixture of a polyvalent metal such as calcium and a monovalent metal such as lithium. The addition of lithium provides a lighter coating and a more flexible coating when applied to a coating of a carboxyl containing resin such as polyacrylic acid since it reduces the crosslink density. Furthermore, the presence of lithium provides a glass-like substance during combustion which holds the fiber together resulting in slow, even combustion with much reduced evolution of conductive fragments. The coated fibers are utilized as fiber reinforcement for composites.
A new test geometry, referred to as centro-symmetric deformation (CSD), is proposed for characterizing the viscoelastic behavior of the matrix of carbon-epoxy laminates. The sample consists of a thin disk, typically 6-14 plies thick, having a nominal diameter of 30 mm. The disk is freely supported on a circular anvil; the load is applied to the center of the disk using an 8-mm-diameter ball bearing nosepiece. The CSD test geometry provides viscoelastic dispersion data which are independent of the angular orientation of the sample. The test geometry is sufficiently sensitive to matrix changes to allow its use for postcuring, humidity, crosslink density, and other matrix change studies. Test results are presented for a carbon-epoxy laminate.
In order to improve solvent resistance of aromatic thermoplastic polymers, ethynyl-terminated aromatic sulfone polymers (ETS), sulfone/ester polymers (SEPE) containing pendent ethynyl groups, and phenoxy resin containing pendent ethynyl groups are synthesized. Cured polysulfones and phenoxy resins containing ethynyl groups on the ends or pendent on the molecules exhibited systematic behavior in solvent resistance, film flexibility, and toughness as a function of crosslink density. The film and composite properties of a cured solvent-resistant ETS were better than those of a commercially available solvent sensitive polysulfone. The study was part of a NASA program to better understand the trade-offs between solvent resistance, processability and mechanical properties which may be useful in designing composite structures for aerospace vehicles.
The constitutive equation for the relaxation behavior of time-dependent, chemically unstable materials developed by Valanis and Peng (1983), which used the irreversible thermodynamics of internal variables in Eyring's absolute reaction theory and yielded a theoretical expression for the effect of chemical crosslink density on the relaxation rate, is presently applied to the creep behavior of a network polymer which is undergoing a scission process. In particular, two equations are derived which may for the first time show the relations between mechanical models and internal variables in the creep expressions, using a three-element model with a Maxwell element.
Difunctional and trifunctional arylacetylenes were used as monomers to form thermoset matrix resin composites. Composites can be hot-pressed at 180 C to react 80 percent of the acetylene groups. Crosslinking is completed by postcuring at 350 C. The postcured resins are thermally stable to nominally 460 C in air. As a result of their high crosslink density, the matrix exhibits brittle failure when uniaxial composites are tested in tension. Failure of both uniaixial tensile and flexural specimens occurs in shear at the fiber-matrix interface. Tensile fracture stresses for 0-deg composites fabricated with 60 v/o Celion 6K graphite fiber were 827 MPa. The strain to failure was 0.5 percent. Composites fabricated with 8 harness satin Celion cloth (Fiberite 1133) and tested in tension also failed in shear at tensile stresses of 413 MPa.