Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Propagation and application of waves in the ionosphere.

This review deals with the propagation of waves, especially radio waves in the ionosphere. In the macroscopic electromagnetic theory, the mathematical structure of wave propagation problems depends entirely on the properties of the dielectric operator in a magnetically nonpermeable medium. These properties can be deduced from general discussions of symmetry and considerations of physical principles. When the medium is specifically the ionosphere, various physical phenomena may occur. Because of a large number of parameters, it is desirable to define a parameter space. A point in the parameter space corresponds to a specific plasma. The parameter space is subdivided into regions whose boundaries correspond to conditions of resonance and cutoff. As the point crosses these boundaries, the refractive index surface transforms continuously.

Yeh, K. C.↗

Inherent redundacy electric heater

A cross-wound electrical heater comprising two resistance coils wound together with opposite pitches electrically connected at their crossing points, is reported. Each element is supplied by a separate power supply of the same magnitude, and each power supply is isolated from reverse currents by a diode. Failure of one of the windings results in only a moderate change in output power.

Kernodle, B. H.↗

Electron detachment in low-energy collisions of H/-/ and D/-/ with He

The applicability of the complex-potential theory to H(-)-He collisions is investigated. Measurements are conducted of the elastic differential cross section for H(-)-He collisions, taking into account energies in the range from 5 to 120 eV. A preliminary determination is made of the energy spectrum of detached electrons. The results are interpreted in terms of the complex-potential theory. The crossing point is determined together with the general shape of the HeH(-) potential curve.

Lam, S. K.↗

The Saturnian 'gas-doughnut' hypothesis

It is hypothesized that constituents escaping the atmosphere of Titan are unlikely to have sufficient velocity to escape from Saturn. Thus most of the material will enter into elliptical orbits which, at some point, cross Titan's orbit at a small angle. In total, this matter will form a 'doughnut' shaped feature, roughly centered on Titan's orbit and having dimensions of about 20 Saturn radii in the Saturnian-equatorial plane and 10 Saturn radii normal to this plane. It is assumed that the material is lost from the doughnut when it is ionized or is recaptured by Titan's atmosphere. The upper limit on the density of hydrogen in the ring is estimated to be about 1,000 particles per cu cm, with up to 99% of the particles in the doughnut being recaptured by Titan.

Mcdonough, T. R.↗

Directional acoustic measurements by laser Doppler velocimeters

Laser Doppler velocimeters (LDVs) were used as velocity microphones to measure sound pressure level in the range of 90-130 db, spectral components, and two-point cross correlation functions for acoustic noise source identification. Close agreement between LDV and microphone data is observed. It was concluded that directional sensitivity and the ability to measure remotely make LDVs useful tools for acoustic measurement where placement of any physical probe is difficult or undesirable, as in the diagnosis of jet aircraft noise.

Mazumder, M. K.↗

Investigations of scaling laws for jet impingement

The statistical properties of tangential flows over surfaces were investigated by two techniques. In one, a laser-Doppler velocimeter was used in a smoke-laden jet to measure one-point statistical properties, including mean velocities, turbulent intensities, intermittencies, autocorrelations, and power spectral densities. In the other technique, free stream and surface pressure probes connected to 1/8 inch microphones were used to obtain single point rms and 1/3 octave pressures, as well as two point cross correlations, the latter being converted to auto spectra, amplitude ratios, phase lags, and coherences. The results of these studies support the vortex model of jets, give some insights into the effects of surface impingement, and confirm that jet diameter and velocity are the scaling parameters for circular jets, while Reynolds number is relatively unimportant.

Morton, J. B.↗

Large-scale Gulf Stream frontal study using GEOS 3 radar altimeter data

From data obtained by the GEOS 3 radar altimeter, sea surface heights are found by both editing and filtering the raw sea surface height measurements and then referencing these processed data to a 5 foot by 5 foot geoid. Any trend between the processed data and the geoid is removed by subtracting out a linear fit to the residuals in the open ocean. Data from individual passes are further processed by applying a minimum variance technique at the subsatellite crossing points to produce surface topography maps for the 6 months and an overall mean map which reveal important details about the Gulf Stream system. The differences between the monthly mean and the overall mean are calculated for each of the 6 months to show the temporal and spatial changes of the Gulf Stream front and spawned eddies. The standard deviation map is even more informative and shows preferred locations of Gulf Stream meanders.

Huang, N. E.↗

A Fundamental System based on observations of minor planets

Astronomers adopt a single system of star positions and motions for reduction of other observations. Relative observations of faint minor planets may make a significant contribution to the evaluation of systematic errors in this Fundamental System, and provide means of deriving a position system in ecliptic coordinates. New techniques, such as observations with the Space Telescope, must be evaluated for possible incorporation into a revision of the Fundamental System. A historical summary of the application of minor planet observations to the formation of astronomical coordinate systems is given. Then a project to investigate the systematic accuracy of the Fundamental System is outlined. Of the four observation types considered, 'crossing point' observations provide a unique stabilizing influence on any coordinate system incorporating them. Finally, some sources of systematic error and some methods of their treatment are discussed.

Hemenway, P.↗

Interaction of the antarctic circumpolar current with bottom topography - An investigation using satellite altimetry

Theoretical studies on the interaction of a zonal current with a zonal ridge, an isolated bump, and a meridional ridge compare favorably with hydrographic observations within the eastward flowing Antarctic Circumpolar Current where it flows over similar topographic features. However, the existing hydrographic data are insufficient for examining the temporal stability and kinematic behavior of the resulting mesoscale structures. In this study, some of these transient features have been compared with patterns in sea surface variability, derived from collinear satellite altimetric data. When these features occurred near the crossing point of two satellite ground traces, it was possible to characterize their length scales, dynamic height relief, and translational and surface geostrophic velocities.

Colton, M. T.↗

A theory of satellite sweeping

A theory of energetic charged particle absorption by insulating moons is presented that includes gyrophase dependence of the absorption probability when the gyroradius is not small compared to the satellite radius. This effect increases the average lifetime against absorption by factors of approximately 2 to 6 above previous estimates at Saturn. The sweeping lifetime then becomes significantly greater than the strong diffusion lifetime. A rigorous expression for the average lifetime against absorption, appropriate for a drift phase averaged radial diffusion equation, is derived assuming (1) a uniform distribution of gyrocenter equatorial plane crossing points in the sweeping corridor and (2) randomization of gyrophase. The pitch angle and energy dependences of the sweeping lifetime are found to be significantly different from the predictions of previous analytical estimates.

Paonessa, M.↗

Possible explanation of the solar-neutrino puzzle

A new derivation of the Mikheyev and Smirnov (1985) mechanism for the conversion of electron neutrinos into mu neutrinos when traversing the sun is presented, and various hypotheses set forth. It is assumed that this process is responsible for the detection of fewer solar neutrinos than expected, with neutrinos below a minimum energy, E(m), being undetectable. E(m) is found to be about 6 MeV, and the difference of the squares of the respective neutrino masses is calculated to be 6 X 10 to the - 5th sq eV. A restriction on the neutrino mixing angle is assumed such that the change of density near the crossing point is adiabatic. It is predicted that no resonance conversion of neutrinos will occur in the dense core of supernovae, but conversion of electron neutrinos to mu neutrinos will occur as they escape outward through a density region around 100.

Bethe, H. A.↗

Comparison of the 1984 and 1985 AIS data over the Singatse Range (Yerington), Nevada

The Singatse Range is composed of a series of 53 types of volcanic, plutonic, metamorphic, and sedimentary rocks. In addition the Jurassic plutonic rocks are also of economic interest for their copper mineralization which is contained in a porphyry dike swarm. The 1984 and 1985 flight results from the Airborne Imaging Spectrometer (AIS) instrument flown in the NASA/JPL C-130 aircraft are contrasted and compared. The 1984 data are less noisy than the 1985, in which many sets of vertical stripings from bad detectors can be seen. Significantly however, enough of the hydrothermal alteration patterns can be seen in each line at the mutual crossing points that one can say that the specific targets were detected in both year's flights. The spectra of both years are corrupted by the second-order effect from the grating, but 0-H bond absorption at essentially correct wavelengths for sericite and/or kaolinite can be seen.

Lyon, R. J. P.↗

Theoretical study of the first and second negative systems of N2(+)

Extended Gaussian basis sets and large CASSCF/multireference CI wave functions are used in theoretical determination of the potential curves for the X 2Sigma(+)g, B 2Sigma(+)g, C 2Sigma(+)u, (1) 2Delta(u), (2) 2Delta(u), 4Pi(u), and 2Sigma(-)u states of N2(+). The results, including the radial dependence of the electronic transition moments, the Einstein coefficients, the radiative lifetimes, and the crossing points between selected states, are presented in extensive tables and graphs and discussed in detail.

Langhoff, Stephen R.↗

Safe Replacement For Asbestos In Nickel/Hydrogen Cells

Polyethylene fibers and potassium titanate particles perform as well as asbestos. New material for separators of nickel-hydrogen electrochemical cells offers performance similar to that of asbestos separator material without adverse health effects. In one version, separator contains pure polyethylene fibers, and may or may not contain supplementary latices as bonding agents. In standard wet-laying papermaking process, fibers pressed into mat, then dried. Mat used as is or pressed further in hot calender stack to soften and fuse fibers at crossing points. Treatment reduces porosity and increases resistance of mat to passage of air bubbles under pressure. In alternative version, matrix of 20 to 40 percent polyethylene fibers and 60 to 80 percent potassium titanate particles formed on paper machine, then dried. It, too, can be treated by hot calendering.

Scott, William E.↗

Compression strength of composite primary structural components

A status report of work performed during the period May 1, 1992 to October 31, 1992 is presented. Research was conducted in three areas: delamination initiation in postbuckled dropped-ply laminates; stiffener crippling initiated by delamination; and pressure pillowing of an orthogonally stiffened cylindrical shell. The geometrically nonlinear response and delamination initiation of compression-loaded dropped-ply laminates is analyzed. A computational model of the stiffener specimens that includes the capability to predict the interlaminar response at the flange free edge in postbuckling is developed. The distribution of the interacting loads between the stiffeners and the shell wall, particularly at the load transfer at the stiffener crossing point, is determined.

Johnson, Eric R.↗

Interaction of two glancing, crossing shock waves with a turbulent boundary-layer at various Mach numbers

A preliminary experimental investigation was conducted to study two crossing, glancing shock waves of equal strengths, interacting with the boundary-layer developed on a supersonic wind tunnel wall. This study was performed at several Mach numbers between 2.5 and 4.0. The shock waves were created by fins (shock generators), spanning the tunnel test section, that were set at angles varying from 4 to 12 degrees. The data acquired are wall static pressure measurements, and qualitative information in the form of oil flow and schlieren visualizations. The principle aim is two-fold. First, a fundamental understanding of the physics underlying this flow phenomena is desired. Also, a comprehensive data set is needed for computational fluid dynamic code validation. Results indicate that for small shock generator angles, the boundary-layer remains attached throughout the flow field. However, with increasing shock strengths (increasing generator angles), boundary layer separation does occur and becomes progressively more severe as the generator angles are increased further. The location of the separation, which starts well downstream of the shock crossing point, moves upstream as shock strengths are increased. At the highest generator angles, the separation appears to begin coincident with the generator leading edges and engulfs most of the area between the generators. This phenomena occurs very near the 'unstart' limit for the generators. The wall pressures at the lower generator angles are nominally consistent with the flow geometries (i.e. shock patterns) although significantly affected by the boundary-layer upstream influence. As separation occurs, the wall pressures exhibit a gradient that is mainly axial in direction in the vicinity of the separation. At the limiting conditions the wall pressure gradients are primarily in the axial direction throughout.

Hingst, Warren R.↗

Output optics for laser velocimeters

Space savings are effected in the optical output system of a laser velocimeter. The output system is comprised of pairs of optical fibers having output ends from which a beam of laser light emerges, a transfer lens for each light beam, and at least one final (LV) lens for receiving the light passing through the transfer lenses and for focussing that light at a common crossing point or area. In order to closely couple the transfer lenses to the final lens, each transfer lens is positioned relative to the final lens receiving light therefrom such that the output waist of the corresponding beam received by the final lens from the transfer lens is a virtual waist located before the transfer lens.

Lynch, Dana H.↗

The overlapping plates method applied to CCD observations of 243 Ida

The overlapping plates method has been applied to crossing-point Charge Coupled Device (CCD) observations of minor planet 243 Ida to produce absolute position measurements precise to better than 0.1 sec and differential position measurements precise to better than 0.06 sec. Although these observations numbered only 17 out of the 520 that produced the final ground-based Ida ephemeris for the Galileo spacecraft flyby, their inclusion decreased Ida's downtrack error from 78 to 60 km and its out-of-plane error from 58 to 44 km.

Owen, W. M., Jr.↗