Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Convergence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Converging Supergranular Flows and the Formation of Coronal Plumes

Earlier studies have suggested that coronal plumes are energized by magnetic reconnection between unipolar flux concentrations and nearby bipoles, even though magnetograms sometimes show very little minority-polarity flux near the footpoints of plumes. Here we use high-resolution extreme-ultraviolet (EUV) images and magnetograms from the Solar Dynamics Observatory (SDO) to clarify the relationship between plume emission and the underlying photospheric field. We find that plumes form where unipolar network elements inside coronal holes converge to form dense clumps, and fade as the clumps disperse again. The converging flows also carry internetwork fields of both polarities. Although the minority-polarity flux is sometimes barely visible in the magnetograms, the corresponding EUV images almost invariably show loop-like features in the core of the plumes, with the fine structure changing on timescales of minutes or less. We conclude that the SDO observations are consistent with a model in which plume emission originates from interchange reconnection in converging flows, with the plume lifetime being determined by the approximately 1-day evolutionary timescale of the supergranular network. Furthermore, the presence of large EUV bright points and/or ephemeral regions is not a necessary precondition for the formation of plumes, which can be energized even by the weak, mixed-polarity internetwork fields swept up by converging flows.

Sun: corona↗

Fundamental Improvement of a Convergence Test for Iterative Strain-Gage Balance Load Predictions

A fundamental improvement of a convergence test for wind tunnel strain-gage balance load iterations was developed. The improvement became necessary because incorrect test results were obtained whenever the original test was applied to multi-component balances with large load capacity differences. The original test was first published in NASA TN D-6860. It uses an upper bound of the Lipschitz constant to assess convergence characteristics of balance load predictions whenever the Iterative Method is applied. The Lipschitz constant is a function of the partial derivatives of each balance load component with respect to all other load components. Unfortunately, the original definition of the convergence test overlooked the fact that the Lipschitz constant is a dimensionless quantity and that the partial derivative of one load component with respect to another load component is not always dimensionless. Therefore, an improvement of the original test was successfully developed that uses load capacities to make all inputs for the calculation of the Lipschitz constant dimensionless before use. Results from the calibration data analysis of a six-component force balance and a five-component semi-span balance are used to illustrate the application of the improved load iteration convergence test.

Strain-Gage Balance↗

An Overview of the Null-Field Method. II: Convergence and Numerical Stability

In this paper we provide an analysis of the convergence and numerical stability of the null-field method with discrete sources. We show that (i) if the null-field scheme is numerically stable then we can decide whether or not convergence can be achieved; (ii) if the null-field scheme is numerically unstable then we cannot draw any conclusion about the convergence issue; and (iii) the numerical stability is closely related to the property of a tangential system of radiating discrete sources to form a Riesz basis. Our numerical analysis indicates that for prolate spheroids and localized vector spherical wave functions, the null-field scheme is numerically unstable (this system of vector functions does not form a Riesz basis), while for distributed vector spherical wave functions, the numerical instability is not so pronounced (this system of discrete sources almost possesses the property of being a Riesz basis). We also describe an analytical method for computing the surface integrals in the framework of the conventional null-field method with localized vector spherical wave functions which increases the stability of the numerical scheme.

Null-field method↗

Effect of jet convergence angle on the performance of annular nozzles with semitoroidal concave plugs at Mach numbers up to 1.82

Results of an investigation at static conditions and at Mach numbers up to 1.82 are presented for 12 nozzle configurations which have jet convergence angle and jet throat area as geometric parameters. The variation of jet convergence angle from 15 to 40 deg had little effect on the performance of the nozzles having the large value of primary throat area; however, increasing jet convergence angle generally had an adverse effect on performance of the nozzles having the smaller value of primary throat area. The performance of the nozzle configurations with the larger primary throat area is competitive with nozzles designed for operation over the Mach number range.

Mercer, C. E.↗

Applications of partial orderings to the study of positive definiteness, monotonicity, and convergence of iterative methods for linear systems.

Most of the known results concerning convergence of iterative methods for solving linear systems involve either positive definiteness or monotonicity. In this paper a new concept, called K-semipositivity, is introduced, which provides a link between convergence theory, monotonicity, and positive definiteness. By using this concept, together with partial orderings in Euclidean n-space, several new convergence theorems are proved. Application to Jacobi's methods and the theory of regular splittings shows the usefulness of these new results.

Vandergraft, J. S.↗

On improving the iterative convergence properties of an implicit approximate-factorization finite difference algorithm

The iterative convergence properties of an approximate-factorization implicit finite-difference algorithm are analyzed both theoretically and numerically. Modifications to the base algorithm were made to remove the inconsistency in the original implementation of artificial dissipation. In this way, the steady-state solution became independent of the time-step, and much larger time-steps can be used stably. To accelerate the iterative convergence, large time-steps and a cyclic sequence of time-steps were used. For a model transonic flow problem governed by the Euler equations, convergence was achieved with 10 times fewer time-steps using the modified differencing scheme. A particular form of instability due to variable coefficients is also analyzed.

Desideri, J. A.↗

Interpolation and extrapolation of creep rupture data by the Minimum Commitment Method. I - Focal-point convergence. II - Oblique translation. III - Analysis of multiheats

The framework in which minimum-commitment analyses of creep-rupture data can be implemented is outlined. The approach is termed the focal point convergence method (FPCM) because the basic parameter A, also known as stability factor, is geometrically the (imaginary) focal point of convergence of all isothermals when extended to the very long or very short times necessary for such convergence to occur. The method can be implemented either by manual-graphical analysis or by computer code. The method is illustrated in detail for the nickel-base alloy Astroloy, as well as for steels, other nickel-base alloys, and aluminum alloys. The minimum-commitment concept is extended to the analysis of creep-rupture data where each isothermal is generated by an oblique translation of the 'master curve' when plotted on log rupture time and log stress axes. The oblique translation method uses the same types of functions in the FPCM. Approaches for treating multiheats on the basis of the FPCM are discussed in detail.

Manson, S. S.↗

A hybrid method for improving MCSCF convergence

It has been found that the convergence problems for many ill conditioned single-configuration SCF calculations arise from mixing among only a small number of orbitals. This orbital set includes the highest closed, the partially filled, and (possibly) a few of the lowest virtual orbitals. The fact that convergence problems can be, in very large measure, linked to a small orbital set is used to design a hybrid MCSCF procedure in which these orbitals are treated using a second-order MCSCF method, while other mixings are treated with a lower-order method which avoids the time consuming integral transformation. Tests on BeO show that the hybrid method yields convergence even when the simple lower-order treatment diverges. The method is expected to facilitate determination of MCSCF wave functions for large basis problems and for the construction of potential energy surfaces.

Bauschlicher, C. W., Jr.↗

Acceleration of convergence of vector sequences

A general approach to the construction of accelerated convergence methods for vector sequences is proposed. A simplified version of minimal polynomial extrapolation is emphasized. The convergence of this method is analyzed and it is shown that it is especially suitable for accelerating the convergence of vector sequences that are obtained when one solves linear systems of equations iteratively.

Sidi, A.↗

Numerical comparisons of nonlinear convergence accelerators

As part of a continuing program of numerical tests of convergence accelerators, the iterated Aitken's Delta-squared method, Wynn's epsilon algorithm, Brezinski's theta algorithm, and Levin's u transform are compared on a broad range of test problems: linearly convergence alternating, monotone, and irregular-sign series, logarithmically convergent series, power method and Bernoulli method sequences, alternating and monotone asymptotic series, and some perturbation series arising in applications. In each category either the epsilon algorithm or the u transform gives the best results of the four methods tested. In some cases differences among methods are slight, and in others they are quite striking.

Smith, D. A.↗

Convergence characteristics of nonlinear vortex-lattice methods for configuration aerodynamics

Nonlinear panel methods have no proof for the existence and uniqueness of their solutions. The convergence characteristics of an iterative, nonlinear vortex-lattice method are, therefore, carefully investigated. The effects of several parameters, including (1) the surface-paneling method, (2) an integration method of the trajectories of the wake vortices, (3) vortex-grid refinement, and (4) the initial conditions for the first iteration on the computed aerodynamic coefficients and on the flow-field details are presented. The convergence of the iterative-solution procedure is usually rapid. The solution converges with grid refinement to a constant value, but the final value is not unique and varies with the wing surface-paneling and wake-discretization methods within some range in the vicinity of the experimental result.

Seginer, A.↗

Convergence and stability properties of minimal polynomial and reduced rank extrapolation algorithms

The minimal polynomial and reduced rank extrapolation algorithms are two acceleration of convergence methods for sequences of vectors. In a recent survey these methods were tested and compared with the scalar, vector, topological epsilon algorithms, and were observed to be more efficient than the latter. It was also observed that the two methods have similar convergence properties. The convergence and stability properties of these methods are analyzed and the performance of the acceleration methods when applied to a class of vector sequences that includes those sequences obtained from systems of linear equations by using matrix iterative methods is discussed.

Sidi, A.↗

Improving the convergence rate of parabolic ADI methods

The rate of convergence to steady state of parabolic Alternating Direction Implicit (ADI) solvers is analyzed in terms of the L(2)-norms of the residuals. The analysis allows one to predict the number of iterations necessary for convergence as function of the Courant number, Lambda. A simple modification of existing ADI codes is devised. It improves the convergence rate substantially and is insensitive to the Courant number in a large range of Lambda.

Abarbanel, S. S.↗

Convergence characteristics of nonlinear vortex-lattice methods for configuration aerodynamics

Nonlinear panel methods have no proof for the existence and uniqueness of their solutions. The convergence characteristics of an iterative, nonlinear vortex-lattice method are, therefore, carefully investigated. The effects of several parameters, including 1) the surface-paneling method, 2) the integration method of the trajectories of the wake vortices, 3) vortex-grid refinement , and 4) the initial conditions for the first iteration on the computed aerodynamic coefficients and on the flow field details are presented. The convergence of the iterative-solution procedure is usually rapid. The solution converges with grid refinement to a constant value, but the final value is not unique and varies with the wing surface-paneling and wake-discretization methods within some range in the vicinity of the experimental result.

Seginer, A.↗

The effect of channel convergence on heat transfer in a passage with short pin fins

Array averaged heat transfer coefficients were obtained for two configurations of short pin fins in a converging channel and for two flat plate configurations in a converging channel. The effect of flow acceleration due to channel convergence and the effect of varying pin length on the heat transfer was determined. Results are presented in the form of Nusselt number versus Reynolds number for the four geometries tested.

Brigham, B. A.↗

Static internal performance of a two-dimensional convergent nozzle with thrust-vectoring capability up to 60 deg

An investigation was conducted at wind-off conditions in the static-test facility of the Langley 16-Foot Transonic Tunnel to determine the internal performance characteristics of a two-dimensional convergent nozzle with a thrust-vectoring capability up to 60 deg. Vectoring was accomplished by a downward rotation of a hinged upper convergent flap and a corresponding rotation of a center-pivoted lower convergent flap. The effects of geometric thrust-vector angle and upper-rotating-flap geometry on internal nozzle performance characteristics were investigated. Nozzle pressure ratio was varied from 1.0 (jet off) to approximately 5.0.

Leavitt, L. D.↗

Convergence to steady state of solutions of Burgers' equation

Consider the initial boundary value problem for Burgers' equation. It is shown that its solutions converge, in time, to a unique steady state. The speed of the convergence depends on the boundary conditions and can be exponentially slow. Methods to speed up the rate of convergence are also discussed.

Kreiss, G.↗

The convergence of spectral methods for nonlinear conservation laws

The convergence of the Fourier method for scalar nonlinear conservation laws which exhibit spontaneous shock discontinuities is discussed. Numerical tests indicate that the convergence may (and in fact in some cases must) fail, with or without post-processing of the numerical solution. Instead, a new kind of spectrally accurate vanishing viscosity is introduced to augment the Fourier approximation of such nonlinear conservation laws. Using compensated compactness arguments, it is shown that this spectral viscosity prevents oscillations, and convergence to the unique entropy solution follows.

Tadmor, Eitan↗