Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Convective clouds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Detection of small drizzle droplets in a large cloud chamber using ultrahigh-resolution radar

Abstract. A large convection–cloud chamber has the potential to produce drizzle-sized droplets, thus offering a new opportunity to investigate aerosol–cloud–drizzle interactions at a fundamental level under controlled environmental conditions. One key measurement requirement is the development of methods to detect the low-concentration drizzle drops in such a large cloud chamber. In particular, remote sensing methods may overcome some limitations of in situ methods. Here, the potential of an ultrahigh-resolution radar to detect the radar return signal of a small drizzle droplet against the cloud droplet background signal is investigated. It is found that using a small sampling volume is critical to drizzle detection in a cloud chamber to allow a drizzle drop in the radar sampling volume to dominate over the background cloud droplet signal. For instance, a radar volume of 1 cubic centimeter (cm3) would enable the detection of drizzle embryos with diameter larger than 40 µm. However, the probability of drizzle sampling also decreases as the sample volume reduces, leading to a longer observation time. Thus, the selection of radar volume should consider both the signal power and the drizzle occurrence probability. Finally, observations from the Pi Convection–Cloud Chamber are used to demonstrate the single-drizzle-particle detection concept using small radar volume. The results presented in this study also suggest new applications of ultrahigh-resolution cloud radar for atmospheric sensing.

54 ENVIRONMENTAL SCIENCES↗

A Decadal Hybrid GCM Simulation Using Deep‐Learning‐Based Cloud and Convection Parameterization Generalized to a Warm Climate

A critical challenge for machine‐learning (ML) parameterization in global climate models (GCMs) is to achieve stable, accurate simulations under climates not seen during training. Previous studies have demonstrated promising offline performance and year‐long online stability in aquaplanet simulations but have encountered difficulties in real geography and under climate warming. Here we report that a GCM with real geography configuration using neural‐network‐based cloud and convection parameterization, trained exclusively with present‐day climate data, successfully performs a stable, decade‐long simulation of a warm climate with +4 K sea surface temperature (SST). The neural network (NN) is based on Han et al. (2023, https://doi.org/10.1029/2022ms003508 ) with additional inputs. The simulation captures the global precipitation distribution, surface temperatures, vertical atmospheric structures, and extreme precipitation very well, closely matching simulations from both the superparameterized CAM (SPCAM) and the conventional CAM5 in the warm climate without accuracy degradation compared to those in the baseline climate. Moreover, it produces a climate response to +4 K SST in atmospheric thermodynamic states and circulations similar to those from SPCAM and CAM5. Prognostic ablation tests on NN input variables show that the NN without convective memory as input suffers from numerical instability, and the NN without considering radiative variables and land fraction as input, or with reduced training samples produce less accurate results. To our knowledge, this is the first time an ML parameterization successfully achieves online extrapolation to a warm climate without using additional warm‐climate data for training. It demonstrates the potential of ML‐driven parameterizations for credible long‐term climate projections.

Atmosphere model↗

Droplet Growth or Evaporation Does Not Buffer the Variability in Supersaturation in Clean Clouds

Abstract Water vapor supersaturation in clouds is a random variable that drives activation and growth of cloud droplets. The Pi Convection–Cloud Chamber generates a turbulent cloud with a microphysical steady state that can be varied from clean to polluted by adjusting the aerosol injection rate. The supersaturation distribution and its moments, e.g., mean and variance, are investigated for varying cloud microphysical conditions. High-speed and collocated Eulerian measurements of temperature and water vapor concentration are combined to obtain the temporally resolved supersaturation distribution. This allows quantification of the contributions of variances and covariances between water vapor and temperature. Results are consistent with expectations for a convection chamber, with strong correlation between water vapor and temperature; departures from ideal behavior can be explained as resulting from dry regions on the warm boundary, analogous to entrainment. The saturation ratio distribution is measured under conditions that show monotonic increase of liquid water content and decrease of mean droplet diameter with increasing aerosol injection rate. The change in liquid water content is proportional to the change in water vapor concentration between no-cloud and cloudy conditions. Variability in the supersaturation remains even after cloud droplets are formed, and no significant buffering is observed. Results are interpreted in terms of a cloud microphysical Damköhler number (Da), under conditions corresponding to , i.e., the slow-microphysics regime. This implies that clouds with very clean regions, such that is satisfied, will experience supersaturation fluctuations without them being buffered by cloud droplet growth. Significance Statement The saturation ratio (humidity) in clouds controls the growth rate and formation of cloud droplets. When air in a turbulent cloud mixes, the humidity varies in space and time throughout the cloud. This is important because it means cloud droplets experience different growth histories, thereby resulting in broader size distributions. It is often assumed that growth and evaporation of cloud droplets buffers out some of the humidity variations. Measuring these variations has been difficult, especially in the field. The purpose of this study is to measure the saturation ratio distribution in clouds with a range of conditions. We measure the in-cloud saturation ratio using a convection cloud chamber with clean to polluted cloud properties. We found in clouds with low concentrations of droplets that the variations in the saturation ratio are not suppressed.

54 ENVIRONMENTAL SCIENCES↗

Enhanced Convective Microphysics Scheme and Its Impacts on Mean Climate in E3SM

Abstract To improve the representation of microphysical processes in convective clouds and their interaction with aerosol and stratiform clouds, a two‐moment convective microphysics parameterization (CMP) scheme developed by Song and Zhang (2011, https://doi.org/10.1029/2010jd014833 ) is upgraded and implemented in E3SM. The new developments include: (a) implementing a parameterization for graupel to enhance the representation of ice‐phase microphysical processes; (b) representing the impact of spatial inhomogeneity of cloud droplets in cumulus ensembles on autoconversion and accretion processes to improve the representation of warm‐rain microphysical processes; (c) implementing a comprehensive Bergeron process parameterization to better represent mixed‐phase microphysical processes; and (d) representing the interactions between ice‐phase microphysics and cloud thermodynamics. Simulations show that the cloud microphysical properties simulated by the CMP are generally in good agreement with observations. It reasonably simulates the changes in droplets effective radius related to precipitation formation in convective clouds, as identified from satellite observations. It also successfully simulates the contrast in these processes between maritime and continental clouds, demonstrating its capability to simulate the impact of aerosols on convection. Analyses of the impact of CMP on climate mean state simulation demonstrate that the CMP slightly improves the simulations of precipitation, cloud macrophysical properties, longwave cloud radiative forcing, zonal wind, and temperature. However, a degradation in shortwave cloud radiative forcing occurs.

GCM↗

The Energy Exascale Earth System Model Version 3: 1. Overview of the Atmospheric Component

This paper describes the atmospheric component of the US Department of Energy's Energy Exascale Earth System Model (E3SM) version 3. Significant updates have been made to the atmospheric physics compared to earlier versions. Specifically, interactive gas chemistry has been implemented, along with improved representations of aerosols and dust emissions. A new stratiform cloud microphysics scheme more physically treats ice processes and aerosol‐cloud interactions. The deep convection parameterization has been largely improved with sophisticated microphysics for convective clouds, making model convection sensitive to large‐scale dynamics, and incorporating the dynamical and physical effects of organized mesoscale convection. Improvements in aerosol wet removal processes and parameter re‐tuning of key aerosol and cloud processes have improved model aerosol radiative forcing. The model's vertical resolution has increased from 72 to 80 layers with the extra eight layers added in the lower stratosphere to better simulate the Quasi‐Biennial Oscillation. These improvements have enhanced E3SM's capability to couple aerosol, chemistry, and biogeochemistry and reduced some long‐standing biases in simulating tropical variability. Compared to its predecessors, the model shows a much stronger signal for the Madden‐Julian Oscillation, Kelvin waves, mixed Rossby‐gravity waves, and eastward inertia‐gravity waves. Aerosol radiative forcing has been considerably reduced and is now better aligned with community best estimates, leading to significantly improved skill in simulating historical temperature records. Its simulated mean‐state climate is largely comparable to E3SMv2, but with some notable degradation in shortwave cloud radiative effect, precipitable water, and surface wind stress, which will be addressed in future updates.

54 ENVIRONMENTAL SCIENCES↗

Intense formation of secondary ultrafine particles from Amazonian vegetation fires and their invigoration of deep clouds and precipitation

New particle formation (NPF) in fire smoke is thought to be unlikely due to large condensation and coagulation sinks that scavenge molecular clusters. We analyze aircraft measurements over the Amazon and find that fires significantly enhance NPF and ultrafine particle (UFP < 50 nm diameter) numbers compared to background conditions, contrary to previous understanding. We identify that the nucleation of dimethylamine with sulfuric acid, which is aided by the formation of extremely low volatility organics in biomass-burning smoke, can overcome the large condensation and coagulation sinks and explain aircraft observations. We show that freshly formed clusters rapidly grow to UFP sizes through biomass-burning secondary organic aerosol formation, leading to a 10-fold increase in UFP number concentrations. Here, we find a contrasting effect of UFPs on deep convective clouds compared to the larger particles from primary emissions for the case investigated here. UFPs intensify the deep convective clouds and precipitation due to increased condensational heating, while larger particles delay and reduce precipitation.

54 ENVIRONMENTAL SCIENCES↗

Impact of Advection Schemes on Tracer Interrelationships in Large-Eddy Simulations of Deep Convection

This study investigates the preservation of tracer interrelationships during advection in large-eddy simulations of an idealized deep convective cloud, which is particularly relevant to chemistry, aerosol, and cloud microphysics models. Employing the Cloud Model 1, advection is represented using third-, fifth-, and seventh-order weighted essentially non-oscillatory schemes. As a simplified analogy for cloud hydrometeors and aerosols, several inert passive tracers following linear and nonlinear relationships are initialized after the cloud reaches ~6-km depth. Numerical mixing in the simulated turbulent convective clouds leads to significant deviations from the initial nonlinear relationships between tracers. In these simulations, a considerable fraction of the grid points where the tracers’ nonlinear relationships are altered from advection are classified as unrealistic (e.g., ~13% for the environmental tracers on average), including errors from range-preserving unmixing and overshooting. Errors in the sum of three tracers are also relatively large, ranging between ~1% and 16% for 5% of the grid points in and near the cloud. The magnitude of unrealistic mixing and errors in the sum of three tracers generally increase with the order of accuracy of the advection scheme. These results are consistent across model grid spacings ranging from 50 to 200 m, and across three different flow realizations for each combination of grid spacing and advection scheme tested. Tests employing a previously proposed scalar normalization procedure show substantially reduced errors in the sum of three tracers with a relatively small negative impact on other tracer relationships. This analysis, therefore, suggests efficacy of the normalization procedure when applied to turbulent three-dimensional cloud simulations.

54 ENVIRONMENTAL SCIENCES↗

Variability in Ice Nucleating Particles Across Greater Houston Texas

The concentration and cloud-forming potential of a region's ice nucleating particle (INP) population have uncertain impacts on deep convective clouds. Specifically, ice nucleating particles (INPs) may affect various cloud properties related to the formation, lifetime, and precipitation of deep convective clouds. As part of the U.S. Department of Energy's TRacking Aerosol and Convection interaction ExpeRiment (TRACER) campaign, researchers from Texas A&M University deployed three Davis Rotating-drum Universal-size-cut Monitoring (DRUM) samplers throughout Greater Houston, Texas from June through September 2022. Ambient particles, collected at the surface with the DRUM samplers in four aerodynamic diameter size ranges (>3, 3–1.2, 1.2–0.34, and 0.34–0.15 μm), were analyzed in offline cold-stage ice nucleation experiments. The INP population in Greater Houston is complex, varying by site and day, but can be generalized by a weak to moderately efficient mode of INPs at −24°C and an efficient mode at −15°C. Analysis reveals that supermicron particles are largely responsible for ice nucleation warmer than −20°C across the region while submicron particles dominate at temperatures colder than −20°C. Additionally, significant spatial diversity in the INP population was observed, with differences in mean nucleation temperature between sites for nearly every size cut. Although INP concentrations were typically ∼0.08 L −1 at −20°C throughout the campaign, a notable region-wide increase in INP concentration for particles freezing at temperatures warmer than −20°C occurred from mid-August to mid-September. This comprehensive characterization of Greater Houston's INP population, including spatial, temporal, and particle size variations, can help constrain ice microphysics parameterizations in weather and climate models.

Thompson, Seth A. [Texas A & M Univ., College Stat↗

Cloud phase and macrophysical properties over the Southern Ocean during the MARCUS field campaign

To investigate the cloud phase and macrophysical properties over the Southern Ocean (SO), the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF2) was installed on the Australian icebreaker research vessel (R/V) Aurora Australis during the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) field campaign (41 to 69° S, 60 to 160° E) from October 2017 to March 2018. To examine cloud properties over the midlatitude and polar regions, the study domain is separated into the northern (NSO) and southern (SSO) parts of the SO, with a demarcation line of 60°S. The total cloud fractions (CFs) were 77.9 %, 67.6 %, and 90.3 % for the entire domain, NSO and SSO, respectively, indicating that higher CFs were observed in the polar region. Low-level clouds and deep convective clouds are the two most common cloud types over the SO.

54 ENVIRONMENTAL SCIENCES↗

Radar and lidar based cloud type product at the ARM ENA observatory

Following methods outlined in Remillard et al. (2012), we classify seven cloud types using radar reflectivity, best-estimated cloud base, and cloud-layer product from the Active Remotely Sensed Cloud Locations (ARSCL) product (Kollias et al. 2007). A cloud mask is created based on the detectable radar reflectivity (>-40 dBZ) combined with the best-estimated cloud base height. Each cloud object is analyzed individually as contiguous cloudy pixels, and its type is determined based on the cloud’s boundaries and duration. Focusing on marine boundary-layer clouds, low clouds are further classified into four types: shallow cumulus, broken stratocumulus (Sc) or cumulus clouds, single-layer Sc, and multi-layer Sc or Sc coupled with cumulus. The remaining three categories are middle clouds, high clouds, and deep convective clouds. For detailed definition of each cloud type, please refer to Zheng et al. (2024).

54 ENVIRONMENTAL SCIENCES↗

Rapid growth of anthropogenic organic nanoparticles greatly alters cloud life cycle in the Amazon rainforest

Aerosol-cloud interactions remain uncertain in assessing climate change. While anthropogenic activities produce copious aerosol nanoparticles smaller than 10 nanometers, they are too small to act as efficient cloud condensation nuclei (CCN). The mechanisms responsible for particle growth to CCN-relevant sizes are poorly understood. Here, we present aircraft observations of rapid growth of anthropogenic nanoparticles downwind of an isolated metropolis in the Amazon rainforest. Model analysis reveals that the sustained particle growth to CCN sizes is predominantly caused by particle-phase diffusion-limited partitioning of semivolatile oxidation products of biogenic hydrocarbons. Cloud-resolving numerical simulations show that the enhanced CCN concentrations in the urban plume substantially alter the formation of shallow convective clouds, suppress precipitation, and enhance the transition to deep convective clouds. The proposed nanoparticle growth mechanism, expressly enabled by the abundantly formed semivolatile organics, suggests an appreciable impact of anthropogenic aerosols on cloud life cycle in previously unpolluted forests of the world.

54 ENVIRONMENTAL SCIENCES↗

Optimizing radar scan strategies for tracking isolated deep convection using observing system simulation experiments

Abstract. Optimizing radar observation strategies is one of the most important considerations in pre-field campaign periods. This is especially true for isolated convective clouds that typically evolve faster than the observations captured by operational radar networks. This study investigates uncertainties in radar observations of the evolution of the microphysical and dynamical properties of isolated deep convective clouds developing in clean and polluted environments. It aims to optimize the radar observation strategy for deep convection through the use of high-spatiotemporal cloud-resolving model simulations, which resolve the evolution of individual convective cells every 1 min, coupled with a radar simulator and a cell tracking algorithm. The radar simulation settings are based on the Tracking Aerosol Convection Interactions ExpeRiment (TRACER) and Experiment of Sea Breeze Convection, Aerosols, Precipitation and Environment (ESCAPE) field campaigns held in the Houston, TX, area but are generalizable to other field campaigns focusing on isolated deep convection. Our analysis produces the following four outcomes. First, a 5–7 m s−1 median difference in maximum updrafts of tracked cells is shown between the clean and polluted simulations in the early stages of the cloud lifetimes. This demonstrates the importance of obtaining accurate estimates of vertical velocity from observations if aerosol impacts are to be properly resolved. Second, tracking of individual cells and using vertical cross section scanning every minute capture the evolution of precipitation particle number concentration and size represented by polarimetric observables better than the operational radar observations that update the volume scan every 5 min. This approach also improves multi-Doppler radar updraft retrievals above 5 km above ground level for regions with updraft velocities greater than 10 m s−1. Third, we propose an optimized strategy composed of cell tracking by quick (1–2 min) vertical cross section scans from more than one radar in addition to the operational volume scans. We also propose the use of a single-RHI (range height indicator) updraft retrieval technique for cells close to the radars, for which multi-Doppler radar retrievals are still challenging. Finally, increasing the number of deep convective cells sampled by such observations better represents the median maximum updraft evolution with sample sizes of more than 10 deep cells, which decreases the error associated with sampling the true population to less than 3 m s−1.

54 ENVIRONMENTAL SCIENCES↗

Direct high-altitude observations of 2-methyltetrols in the gas- and particle phase in air masses from Amazonia

We present direct observations of 2-methyltetrol (C 5 H 12 O 4 ) in the gas- and particle phase from the deployment of a Filter Inlet for Gases and Aerosols coupled to a Time-of-Flight Chemical Ionization Mass Spectrometer (FIGAERO-CIMS) during the Southern Hemisphere High Altitude Experiment on Particle Nucleation and Growth (SALTENA), which took place between December 2017 and June 2018 at the high-altitude Global Atmosphere Watch station Chacaltaya (CHC) located at 5240 m a s l in the Bolivian Andes. 2-Methyltetrol signals were dominant in a factor resulting from Positive Matrix Factorization (PMF) identified as influenced by Amazon emissions. We combine these observations with investigations of isoprene oxidation chemistry and uptake in an isolated deep convective cloud in the Amazon using a photochemical box model with coupled cloud microphysics and show that, likely, 2-methyltetrol is taken up by hydrometeors or formed in situ in the convective cloud, and then transported in the particle phase in the cold environment of the Amazon outflow and to the station, where it partially evaporates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TRACER Perspectives on Gulf-Breeze and Bay-Breeze Circulations and Coastal Convection

Abstract This study explores gulf-breeze circulations (GBCs) and bay-breeze circulations (BBCs) in Houston–Galveston, investigating their characteristics, large-scale weather influences, and impacts on surface properties, boundary layer updrafts, and convective clouds. The results are derived from a combination of datasets, including satellite observations, ground-based measurements, and reanalysis datasets, using machine learning, changepoint detection method, and Lagrangian cell tracking. We find that anticyclonic synoptic patterns during the summer months (June–September) favor GBC/BBC formation and the associated convective cloud development, representing 74% of cases. The main Tracking Aerosol Convection Interactions Experiment (TRACER) site located close to the Galveston Bay is influenced by both GBC and BBC, with nearly half of the cases showing evident BBC features. The site experiences early frontal passages ranging from 1040 to 1630 local time (LT), with 1300 LT being the most frequent. These fronts are stronger than those observed at the ancillary site which is located further inland from the Galveston Bay, including larger changes in surface temperature, moisture, and wind speed. Furthermore, these fronts trigger boundary layer updrafts, likely promoting isolated convective precipitating cores that are short lived (average convective lifetime of 63 min) and slow moving (average propagation speed of 5 m s −1 ), primarily within 20–40 km from the coast.

54 ENVIRONMENTAL SCIENCES↗

TRACER-Vertical Profile of Aerosol in Convective System (TRACER-VPACS) Field Campaign Report

We investigated physicochemical properties of aerosol at different altitudes during the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) user facility Tracking Aerosol Convection Interactions Experiment (TRACER). We used ARM’s tethered balloon system (TBS) and multi-modal offline analysis techniques available at DOE’s Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL) and at the Advanced Light Source (ALS) at the Lawrence Berkley National Laboratory (LBNL). The main scientific aim of this project was to understand the influence of the vertical profile of aerosol composition on the properties of deep convective clouds. The effect of aerosol properties on convective activity is still poorly understood and debated. For example, previous studies suggested that higher concentration of hygroscopic aerosol may lead to lower collection efficiency and eventually delay in onset of precipitation and total amount of precipitation. However, some observations suggested that increased aerosol concentration may result in vigorous convection and a higher amount of precipitation. In addition, the radiative forcing of the ambient aerosol is strongly influenced by the vertical distribution of aerosols and their chemical composition, and not well constrained in climate models. The estimation of the indirect effect of aerosol also has a significant uncertainty due to the spatial variation of the aerosol, especially at the cloud base. Detailed size-resolved chemical composition studies of aerosol and their microphysical properties, along with in situ measurements from ARM’s mobile facilities, help to improve our understanding of the role of aerosol in deep convective cloud formation over a broad range of environmental thermodynamic and aerosol conditions.

54 ENVIRONMENTAL SCIENCES↗

Underestimated marine stratocumulus cloud feedback associated with overly active deep convection in models

Cloud feedback remains the largest source of uncertainty in equilibrium climate sensitivity (ECS). Many studies have attempted to narrow uncertainties in cloud feedback and ECS by proposing observable metrics with high skill at predicting future climate, referred to as emergent constraints. These constraints are often associated with clouds, convection, and circulation, and are interrelated. However, physical explanations for these connections remain unclear. Here, we propose a new mechanism relating convection and clouds across multiple climate models. Some models show overly active deep convection on daily timescales in the subtropical low cloud regions, which contributes to weaker subsidence inversion and smaller amounts of low-level clouds. Such models predict smaller shortwave (SW) cloud feedback. Using precipitation frequency in these regions as an emergent constraint, encapsulating this mechanism, models with lower SW cloud feedback (<0.50 W m -2 °C - 1) are found to exhibit erroneously frequent convection. Our results suggest that further improvements in understanding and better modeling of cloud and convective systems are necessary for accurate climate predictions.

54 ENVIRONMENTAL SCIENCES↗

The Role of the Toroidal Vortex in Cumulus Clouds' Entrainment and Mixing

Abstract Shallow convective clouds play a crucial role in Earth's energy budget, as they modulate the radiative transfer in the atmosphere and participate in the vertical transport of aerosols, energy, and humidity. The parameterizations representing these complex, vital players in weather and climate models are mostly based on a description of steady‐state plumes and are a source of major uncertainty. Recently, several studies have shown that buoyant thermals are inherent in atmospheric convection and contain a toroidal (ring) vortex. This work studies those vortices in growing shallow cumulus (Cu) clouds using high‐resolution (10 m) Large Eddy Simulations that resolve these vortices in much detail. Recent analysis of such data showed that small‐scale turbulent diffusion is unable to explain the large diluted portion of the cloud. Here we advocate for the important role of the Cu toroidal vortex (TV) in cloud dilution and present the complex dynamics and structure of a Cu TV. Nevertheless, since the vortex dominates the cloud's dilution, simplicity emerges when considering the cloud's lateral mass flux profile. The cloud mixing is quantified using direct flux calculations and Eulerian tracers. In addition, Lagrangian tracers are used to identify the origin of the entrained air and its thermodynamic properties. It shows that most of the air entrained by the vortex is not recycled by the vortex, yet is significantly more humid than the environment. We suggest that the development of new models describing thermals, together with their toroidal vortices, might improve cloud parameterizations in weather and climate models.

Meteorology & Atmospheric Sciences↗

Vertical Structure and Ice Production Processes of Shallow Convective Postfrontal Clouds over the Southern Ocean in MARCUS. Part II: Modeling Study

Abstract Part I of this series presented a detailed overview of postfrontal mixed-phase clouds observed during the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) field campaign. In Part II, we focus on a multiday (23–26 February 2018) case with the aim of understanding ice production as well as model sensitivity to ice process parameterizations using the Weather Research and Forecasting (WRF) Model. The control simulation with the Predicted Particle Properties (P3) microphysics scheme underestimates the ice content and overestimates the supercooled liquid water content, contrary to the bias common in global climate models. The simulations targeted at ice production processes show negligible sensitivity to cloud droplet number concentrations. Further, neither increasing ice nuclei particle (INP) concentrations to an unrealistic level nor adjusting it to MARCUS field estimations alone guarantees more ice production in the model. However, the simulated clouds are found to be highly sensitive to the implementation of immersion freezing, the thresholding of condensation/deposition freezing initiation, and the rime splintering process. By increasing immersion freezing of cloud droplets, relaxing thresholds for condensation/deposition freezing, or removing rime splintering thresholds, the model significantly improves its performance in producing ice. The relaxation of the immersion freezing temperature threshold to the observed cloud-top temperature suggests an in-cloud seeder–feeder mechanism. The results of this work call for an increase in observations of INP, especially over the remote Southern Ocean and at relatively high temperatures, and measurements of ice particle size distributions to better constrain ice nucleating processes in models.

Meteorology & Atmospheric Sciences↗