SEARCH · Engineering Papers

Results for “Controls library”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Combinatorial Cu-Ni Alloy Thin-Film Catalysts for Layer Number Control in Chemical Vapor-Deposited Graphene

We synthesized a combinatorial library of CuxNi1−x alloy thin films via co-sputtering from Cu and Ni targets to catalyze graphene chemical vapor deposition. The alloy morphology, composition, and microstructure were characterized via scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), and X-ray diffraction (XRD), respectively. Subsequently, the CuxNi1−x alloy thin films were used to grow graphene in a CH4-Ar-H2 ambient at atmospheric pressure. The underlying rationale is to adjust the CuxNi1−x composition to control the graphene. Energy dispersive x-ray spectroscopy (EDS) analysis revealed that a continuous gradient of CuxNi1−x (25 at. % < x < 83 at.%) was initially achieved across the 100 mm diameter substrate (~0.9%/mm composition gradient). The XRD spectra confirmed a solid solution was realized and the face-centered cubic lattice parameter varied from ~3.52 to 3.58 A˙, consistent with the measured composition gradient, assuming Vegard’s law. Optical microscopy and Raman analysis of the graphene layers suggest single layer growth occurs with x > 69 at.%, bilayer growth dominates from 48 at.% < x < 69 at.%, and multilayer (≥3) growth occurs for x < 48 at.%, where x is the Cu concentration. Finally, a large area of bi-layer graphene was grown via a CuxNi1−x catalyst with optimized catalyst composition and growth temperature.

2D materials↗

DOE OSTI2022

Simulation of CEFR neutronic start-up tests with FENNECS

This paper presents simulation results of selected Neutronic Start-up Tests of the China Experimental Fast Reactor (CEFR) obtained by the neutronics code FENNECS that have been performed within the frame of the IAEA Coordinated Research Program I31032. The Finite Element Neutronics code FENNECS is developed at GRS and solves the few-group steady-state and transient diffusion equation using a Galerkin-based finite element approach. Its main purpose is the safety assessment of Small Modular Reactors and Micro Reactors with complex geometry (e.g., rotating control drums) which gain increased interest internationally. Serpent has been applied to create reference models of the CEFR and cross-section libraries in 10 energy groups for FENNECS. Using these libraries, the following experiments have been simulated with FENNECS: net criticality, control rod integral and differential worth, void reactivity effect, subassembly exchange reactivity effects and reaction rate distribution. The obtained satisfactory agreements with the measurements represent a valuable contribution to the validation of FENNECS. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Pendant Group Modifications Provide Graft Copolymer Silicones with Exceptionally Broad Thermomechanical Properties

Graft copolymers offer a versatile platform for the design of self-assembling materials; however, simple strategies for precisely and independently controlling the thermomechanical and morphological properties of graft copolymers remain elusive. Here, using a library of 92 polynorbornene-graft-polydimethylsiloxane (PDMS) copolymers, we discover a versatile backbone-pendant sequence-control strategy that addresses this challenge. Small structural variations of pendant groups, e.g., cyclohexyl versus n-hexyl, of small-molecule comonomers have dramatic impacts on order-to-disorder transitions, glass transitions, mechanical properties, and morphologies of statistical and block silicone-based graft copolymers, providing an exceptionally broad palette of designable materials properties. For example, statistical graft copolymers with high PDMS volume fractions yielded unbridged body-centered cubic morphologies that behaved as soft plastic crystals. By contrast, lamellae-forming graft copolymers provided robust, yet reprocessable silicone thermoplastics (TPs) with transition temperatures spanning over 160 °C and elastic moduli as high as 150 MPa despite being both unentangled and un-cross-linked. Altogether, this study reveals a new pendant-group-mediated self-assembly strategy that simplifies graft copolymer synthesis and enables access to a diverse family of silicone-based materials, setting the stage for the broader development of self-assembling materials with tailored performance specifications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Biosensor and optogenetics for systems biology of yeast branched-chain alcohol production and tolerance

In this project we combined synthetic biology, systems biology, protein engineering and metabolic engineering to study, control, and improve the production of branched chain alcohols (BCAs), a class of advanced biofuels preferred by the DOE, in the yeast Saccharomyces cerevisiae. This involved the development and application of optogenetic systems as a new modality of dynamic control of native and engineered metabolic pathways, using light as inducible or repressible agent. The optogenetic systems include gene circuits for light control of gene expression, as well as light-assembled synthetic organelles and photo-switchable protein binders to control metabolic and protein function with light at the protein level. In addition, we developed the first genetically encoded biosensor for BCA production in yeast, which we used to design high throughput assays to identify highly productive strains, pathways, and enzymes. We also showed that this biosensor can be functionally co-expressed with optogenetic circuits in the same strain, raising the possibility of establishing, for the first time, computer-interfaced closed-loop controls of engineered metabolic pathways. The yeast gene deletion library was also utilized to conduct the first systems-level study on BCA toxicity in yeast, which uncovered key fundamental principles of yeast sensitivity and tolerance to these alcohols, allowing us to design highly tolerant strains with increased BCA production. This project, thus comprises the development of several new technologies, which we integrated to make new discoveries on the dynamics of BCA production and their mechanisms of cellular toxicity and tolerance, as well as to establish new paradigms to engineer and control metabolic pathways and microbial fermentations with light, for the production of BCAs and other products of interest to the DOE.

2-metyl-1-butanol↗

DOE OSTI2021

Machine learning to identify geologic factors associated with production in geothermal fields: A casestudy using 3D geologic data, Brady geothermal field, Nevada

In this paper, we present an analysis using unsupervised machine learning (ML) to identify the key geologic factors that contribute to the geothermal production in the Brady geothermal field. Brady is a hydrothermal system in northwestern Nevada that supports both electricity production and direct use of hydrothermal fluids. Transmissive fluid flow pathways are relatively rare in the subsurface but are critical components of hydrothermal systems like Brady and many other types of fluid flow systems in fractured rock. The ML method, non-negative matrix factorization with k-means clustering (NMFk), is applied to a library of fourteen 3D geologic characteristics hypothesized to control hydrothermal circulation in the Brady geothermal field. Our results indicate the macro-scale faults and a local step-over in the fault system preferentially occur along with production wells when compared to injection wells and non-productive wells. We infer that these are the key geologic characteristics that control the through-going hydrothermal transmission pathways at Brady. Our results demonstrate 1) the specific geologic controls on the Brady hydrothermal system and 2) the efficacy of pairing ML techniques with 3D geologic characterization to enhance the understanding of subsurface processes.

15 GEOTHERMAL ENERGY↗

DOE OSTI2026

Multibody for Everybody (M4E): A Symbolic Dynamics Modeling Tool with Applications in Simulation, Control, and Optimization

Developing the analytical model of a multibody system is often the initial step in control and optimization. The analytical model (equations of motion) describes a system’s time evolution under specified forcing conditions. Although developing these equations is easy for simple systems, this process becomes more complex for systems composed of multiple bodies. Deriving equations of motion for complex multibody systems requires specialized expertise in multibody dynamics, is time-consuming, and is susceptible to error. To address this issue, this paper presents an open-source, easy-to-use, systematic framework to derive symbolic equations of motion in both Python and MATLAB using the joint coordinate formulation. This formulation results in a set of ordinary differential equations that use the minimum set of coordinates needed to model a system. The symbolic representation provides better insight into the influence of design parameters on system performance, facilitates sensitivity analysis and parameter studies, and supports direct implementation of control and optimization routines. The tool enables numerical simulation for specified parameter sets, is modular for straightforward integration with other tools and libraries, and allows incorporation of hydrodynamics, mooring, and other external forces. The result is a reproducible, extensible pipeline for modeling, simulation, and design of complex multibody systems. The proposed tool is versatile and can be applied to domains such as robotics, control, and design. In addition, we integrated external libraries that provide capabilities for modeling offshore systems such as underwater robots and marine energy converters.

16 TIDAL AND WAVE POWER↗

DOE OSTI2021

Upgrade of hardware controls for the STAR experiment at RHIC

The STAR experiment has been delivering significant physics results for more than 20 years. Stable operation of the experiment was achieved by using a robust controls system based on the Experimental Physics and Industrial Control System (EPICS). Now an object-oriented approach with Python libraries, adapted for EPICS software, is going to replace the procedural-based EPICS C libraries previously used at STAR. Advantages of the new approach include stability of operation, code reduction and straightforward project documentation. The first two sections of this paper introduce the STAR experiment, give an overview of the EPICS architecture, and present the use of Python for controls software. Therefore, specific examples, as well as upgrades of user interfaces, are outlined in the following sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Thermally Activated Delayed Photoluminescence: Deterministic Control of Excited-State Decay

Thermally activated photophysical processes are ubiquitous in numerous organic and metal-organic molecules, leading to chromophores with excited state properties that can be considered an equilibrium mixture of the available low-lying states. Relative populations of the equilibrated states are governed by temperature. Such molecules have been devised as high quantum yield emitters in modern organic light-emitting diode technology and for deterministic excited state lifetime control to enhance chemical reactivity in solar energy conversion and photocatalytic schemes. This recent discovery of thermally activated photophysics at CdSe nanocrystal-molecule interfaces enables a new paradigm wherein molecule-quantum dot constructs are used to systematically generate material with predetermined photophysical response and excited state properties. Semiconductor nanomaterials feature size-tunable energy level engineering, which considerably expands the purview of thermally activated photophysics beyond what is possible using only molecules. This Perspective is intended to provide a non-exhaustive overview of the advances that led to the integration of semiconductor quantum dots in thermally activated delayed photoluminescence (TADPL) schemes and to identify important challenges moving into the future. The initial establishment of excited state lifetime extension utilizing triplet-triplet excited-state equilibria is detailed. Next, advances involving the rational design of molecules composed of both metal-containing and organic-based chromophores that produce the desired TADPL are described. Lastly, the recent introduction of semiconductor nanomaterials into hybrid TADPL constructs is discussed, paving the way towards the realization of fine-tuned deterministic control of excited state decay. It is envisioned that libraries of synthetically facile composites will be broadly deployed as photosensitizers and light emitters for numerous synthetic and optoelectronic applications in the near future.

14 SOLAR ENERGY↗

DOE OSTI2020

The Efficacy and Safety of Mesalamine and Probiotics in Mild‐to‐Moderate Ulcerative Colitis: A Systematic Review and Meta‐Analysis

Objective . To evaluate the efficacy and safety of mesalamine in conjunction with probiotics for ulcerative colitis. Methods . Random controlled trials (RCTs) were searched in PubMed, EMBASE, Cochrane Library, China National Knowledge Infrastructure, Wanfang, and VIP (VIP Database for Chinese Technical Periodicals) from inception to October 2019. Methodological quality was assessed by the Cochrane Collaboration tool. The quality of evidence was rated by the Grading of Recommendations, Assessment, Development, and Evaluation (GRADE). Data analysis was carried out in Review Manager 5.3. Results . A total of fifteen studies met the criteria for inclusion. Thirteen studies reported the clinical efficacy, three studies provided data on the clinical symptom scores, two trials reported disease activity index, four studies evaluated endoscopic score, and twelve studies reported adverse events. For ulcerative colitis (UC), mesalamine and probiotics had better clinical efficacy than mesalamine alone (≤8 weeks: RR = 1.12, 95% CI: 1.07–1.18, P < 0.0001; >8 weeks: RR = 1.25, 95% CI: 1.11–1.41, P = 0.0003). On the clinical symptom scores, disease activity index, and endoscopic score, UC patients receiving mesalamine and probiotics had significant difference than patients receiving mesalazine alone (MD = −2.02, 95% CI: −3.28 to −0.76, P = 0.002; MD = −1.20, 95% CI: −1.76 to −0.65, P < 0.001; and MD = −0.42, 95% CI: −0.61 to −0.23, P < 0.0001, respectively). There was no statistically significant difference in adverse events between the two groups (RR = 0.88, 95% CI: 0.54 to 1.43, P = 0.60). Conclusion . Our meta‐analysis results supported that mesalamine and probiotics were effective and safe in treating ulcerative colitis.

Tian, Chunying↗

DOE OSTI2020

NRC Multiphysics Analysis Capability Deployment FY2020 - Part 4

This report details progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Sup- port for Advanced Non-Light Water Reactors.” The tasks completed for this report are: • Task 3a: This task demonstrates the effectiveness of Griffin’s methods for interpolating cross sections and SPH correction factors as a function of control drum rotation. The Monte Carlo code Serpent is used to generate reference results. The accuracy of Griffin-calculated eigenvalues and reaction rates are studied as a function of control drum rotation for cross section and SPH factor libraries of varying fidelity. Higher-fidelity libraries require less interpolation and are therefore inherently more accurate; however, they require more computational resources to create. Overall, Griffin is able to accurately model eigenvalue and reaction rates over the full range of drum rotation using a library generated from three to five discrete drum rotations for a particular microreactor design. • Task 3c: This preliminary task successfully demonstrates the performance of a coupled neutron-photon transport calculation with Griffin using the spherical harmonics approximation. The Griffin solutions are compared to reference solutions from the continuous energy Monte Carlo codes MCNP and Serpent. Furthermore, this work also demonstrates how to prepare the neutron and photon libraries using NJOY, MCNP, and Serpent with the latest ENDF/B-VIII data for 235 U and graphite. The Griffin total energy deposition in the active core region is calculated within 0.3% of the reference, but it degrades in the reflector regions with a maximum difference of -1.5%. Overall, the results look promising and future analysis should use an improved data stream and focus on determining the potential cancellation of error within each energy group.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

MassIVE MSV000100641 - Multilayered regulation by RNA thermometers enables precise control of Cas9 expression in E. coli: Cas9-based genome editing technologies can rapidly generate mutations to probe a diverse array of mutant genotypes. However, aberrant Cas9 nuclease translation and activity can occur despite the use of inducible promoters to control expression, leading to extensive cell death. This background killing caused by promoter leakiness severely limits the application of Cas9 for generating mutant libraries because of the potential for population skew. We demonstrate the utility of temperature sensitive RNA elements as a layer of post-transcriptional regulation to reduce the impact of promoter leak. We observe significant temperature-dependent increases in cell survival when certain RNA thermometers (RNATs) are placed upstream of the cas9 coding sequence. We also show that the most highly repressing RNAT, hsp17rep, significantly reduces population skew with a library of characterized guide RNAs in Escherichia coli. This strategy should be applicable to all bacterial Cas9-based methods and technologies.

Explore the source record for details and available documents.

Alexander, William G. [Oak Ridge National Laborato↗

DOE OSTI2023

Low-order aquifer thermal energy storage model for geothermal system simulation

This paper presents a low-order aquifer thermal energy storage (ATES) model for simulation of combined subsurface and above-surface energy systems. The model is included in the Modelica IBPSA Library, which is a free open-source library with basic models for building and district energy and control systems. The model uses a lumped-component method, in which the transient conductive-convective heat and mass transfer equation is radially discretized. To verify the accuracy of the model, we present an inter-model comparison from a simulation test suite. Results show that the Modelica ATES model is in good agreement, with a normalized mean bias error for yearly variation of aquifer temperatures of 1.6×10−2 and 9×10−5 at 1 m and 10 m distance from the well.

Maccarini, Alessandro↗

DOE OSTI2026

Multibody for Everybody (M4E) - A Linearization Approach to Enable Frequency Domain Analysis, Time Integration and Control Co-Design

1.1 Background/Objectives: Marine energy represents a promising yet underexploited source of power. To increase the harvested power, significant efforts have been made to improve wave energy converter (WEC) modeling capabilities and optimize power take-off (PTO) performance; however, these efforts have often treated WEC dynamics, PTO design, and controller development sequentially. In contrast, control co-design (CCD) is emerging as a promising strategy to address these issues directly, creating a growing need for fast analysis tools suitable for repeated simulation and parametric studies [1]. To support this need, this work presents the Multibody for Everybody (M4E) [2] linearization module, which employs a symbolic toolbox to provide deeper insight of WEC design parameters. The objective is to demonstrate that a minimal-coordinate linearization of articulated WEC dynamics can provide accurate wave response predictions and substantial computational savings relative to nonlinear time-domain simulation, while preserving compatibility with broader wave-energy analysis workflows, enabling CCD. 1.2 Approach/Activities: The proposed approach linearizes the equations of motion, generated by M4E, in minimal coordinates about a selected operating point and combines the resulting system with frequencydomain hydrodynamic terms to incorporate the reduced mass, damping, stiffness, and forcing operators. The linearized model is used for both impedance-based response amplitude operator (RAO) prediction and rapid regular-wave time integration. The methodology is demonstrated on a single-flap device and a FOSWEC configuration, with linearized M4E responses compared against the corresponding nonlinear M4E simulations and WEC-Sim results. Regular-wave time histories, RAO trends, and runtime differences are assessed. The framework is also compatible with broader wave-energy workflows, including coupling to WecOptTool, although that capability is not the focus of this work [3]. 1.3 Results/Lessons: The linearized M4E model reproduces key regularwave response characteristics such as integration and Response Amplitude over multiple frequencies. This module matches nonlinear M4E and WEC-Sim results while substantially reducing integration cost. Thus, the proposed framework can serve as a rapid analysis layer for articulated WEC design, parameter studies, and controls-oriented workflows. The analysis is most appropriate in the near-equilibrium regime, about the linearization point.

16 TIDAL AND WAVE POWER↗

DOE OSTI2022

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduction through the ground between boreholes without flowing groundwater. While detailed simulation tools for subsurface heat and mass transfer exist, these fall short in simulating above-surface energy systems. To support the design and operation of such systems, the study developed a coupled model including a software package for building and district energy simulation, and software for detailed heat and mass transfer in the subsurface. For the first, it uses the open-source Modelica Buildings Library, which includes dynamic simulation models for building and district energy and control systems. For the heat and mass transfer in the soil, it uses the TOUGH simulator. The TOUGH family of codes can model heat and multi-phase, multi-component mass transport for a variety of fluid systems, as well as chemical reactions, in fractured porous media. The study validated the coupled modeling approach by comparing the simulation results with one from the g-function based ground response model. It then looked into effects when the water table and the regional groundwater flow are considered in the ground, from the perspective of heat exchange between borehole and ground, and the electrical consumption of the district heating and cooling systems. To access the simulation models, please find the links in the submission: -- For coupled approach validation: see model Buildings.Fluid.Geothermal.Borefields.Examples.BorefieldsWithTough and Buildings.Examples.DistrictReservoirNetworks.Examples.Reservoir3Variable_TOUGH from the "Modelica Building Library" resource, branch issue1495_tough_interface, commit a2667c0. -- For the study of the effect of water table: see model Buildings.Examples.DistrictReservoirNetworks.Examples.Reservoir3Variable_TOUGH from he "Modelica Building Library" resource, branch issue1495_tough_interface_moreIO, commit 760de49. -- For the study of the effect of regional groundwater flow: see Buildings.Examples.DistrictReservoirNetworks.Examples.Reservoir3Variable_TOUGH from he "Modelica Building Library" resource, branch issue1495_tough_interface_moreIO_3D, commit c2a2d2a. The coupling interface script "GrounResponse.py" can be found from the above links in the folder Buildings/Resources/Python-Sources. Also, the needed files for TOUGH simulation are in the folder Buildings/Resources/Python-Sources/ToughFiles that can be accessed through the above links. A brief description of these files is given below; detailed specifications for the first three files may be found in the TOUGH3 Users Guide (Jung et al., 2018) https://tough.lbl.gov/documentation/tough-manuals/. (1) INCON - initial conditions for each grid block (2) INFILE - main input file with material properties and control parameters (3) MESH - description of the computational grid (4) readsave - Modelica/TOUGH interface program: read the final output of TOUGH simulation after TOUGH time step and prepare for transfer to Modelica for next Modelica time step (5) readsave.inp - input parameters for program readsave (6) writeincon - Modelica/TOUGH interface program: write the output of Modelica after Modelica time step and prepare for transfer to TOUGH as initial conditions for the next TOUGH step (7) writeincon.inp - input parameters for program writeincon

15 GEOTHERMAL ENERGY↗

DOE OSTI2021

Artificial Diversity and Defense Security (ADDSec)

Artificial Diversity and Defense Security (ADDSec) machine learning algorithms are used to classify and cluster threats so that an appropriate response can be initiated as a mitigation strategy. The package includes an ensemble of machine learning algorithms such as Support Vector Machines, naïve bayes, logistic regression, and random forest that evolve with the data to recognize anomalous behavior at the host and network levels. Inputs into the machine learning algorithms include end host system calls, system utilization, packet captures, and syslog messages. The machine learning algorithms can be retrained based on user defined intervals or on the number of packets received. ADDSEC's threat responses include Internet Protocol (IP) Address randomization, application port number randomization, and application library randomization. The IP randomization implementation is built on top of a Software Defined Networking (SDN) framework. The SDN controller installs flows on each of the SDN switches with randomized source and destination IP addresses. The application port numbers are randomized using iptables. The application library randomization is created with a LLVM compiler. All randomization schemes are transparent to the endpoints on the network. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2021-3379 O

Cox, RebeccaE.↗

DOE OSTI2021

Versatile Synthetic Platform for Polymer Membrane Libraries Using Functional Networks

Poly(ethylene glycol) (PEG) diacrylate copolymer networks containing pentafluorophenyl active esters can be quantitatively substituted with a wide variety of primary amines, enabling the development of a versatile synthetic platform for the preparation of polymer hydrogel and membrane libraries. Here, by tuning the starting network, a high degree of control over cross-linking density, water uptake, and functional group incorporation can be reproducibly achieved, which is vital for elucidating structure–property relationships in ion transporting membranes. From the same cross-linked scaffold, a diversity of basic, acidic, and solute-chelating moieties were obtained through functionalization, which allows for tailored uptake of basic and acidic organic dyes and metal chloride salts. Ion permeation and sorption measurements for a series of polymer networks with controlled cross-linking density and varied imidazole grafting densities illustrate the ability of this platform to isolate the effect of chemical functionality on ion transport from the effects of cross-linking density and water content.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Multivariate chemogenomic screening prioritizes new macrofilaricidal leads

Development of direct acting macrofilaricides for the treatment of human filariases is hampered by limitations in screening throughput imposed by the parasite life cycle. In vitro adult screens typically assess single phenotypes without prior enrichment for chemicals with antifilarial potential. We developed a multivariate screen that identified dozens of compounds with submicromolar macrofilaricidal activity, achieving a hit rate of >50% by leveraging abundantly accessible microfilariae. Adult assays were multiplexed to thoroughly characterize compound activity across relevant parasite fitness traits, including neuromuscular control, fecundity, metabolism, and viability. Seventeen compounds from a diverse chemogenomic library elicited strong effects on at least one adult trait, with differential potency against microfilariae and adults. Our screen identified five compounds with high potency against adults but low potency or slow-acting microfilaricidal effects, at least one of which acts through a novel mechanism. We show that the use of microfilariae in a primary screen outperforms model nematode developmental assays and virtual screening of protein structures inferred with deep learning. These data provide new leads for drug development, and the high-content and multiplex assays set a new foundation for antifilarial discovery.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Crystal structure engineering in multimetallic high-index facet nanocatalysts

Significance Crystal structure engineering in nanoparticles represents an important strategy in catalyst design, as catalytic performance is highly dependent on atomic arrangement. However, realizing crystal structure engineering in high-index facet nanocatalysts has been a synthetic challenge for decades. Here, we first employed density functional theory calculations to determine whether surface modifications can stabilize high-index facets during crystal structure transformations and then synthesized a library of multimetallic high-index facet tetrahexahedral (THH) nanoparticles with controllable crystal structures. Importantly, the crystal structural transition between the intermetallic and chemically disordered states is reversable, and the THH morphology of nanocatalysts is maintained during this transformation. This approach broadens the synthetic scope of nanocatalysts available for use in diverse chemical processes.

Shen, Bo↗