Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control barrier functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermodynamic and Kinetic Barriers Limiting Solid-State Reactions Resolved through In Situ Synchrotron Studies of Lithium Halide Salts

Although halide salts such as LiCl and LiBr are routinely used as a source of Li ions during ion exchange reactions, a detailed understanding of the processes controlling the rates of these reactions is presently lacking. Recently, it has been discovered that the rate limiting barriers for ion exchange are commonly associated with these salts rather than the ceramic target of ion exchange, making it important to quantitatively understand of salt processes. Here it is demonstrated that in situ synchrotron studies of ion exchange reactions can be used to precisely quantify the thermodynamic activation energies associated with these solid state reactions in a manner that can be directly compared with predictions from density functional theory (DFT). While the temperature dependence of the LiCl reaction rate is found to be set by a barrier associated with ion hopping, it was discovered that for LiBr it is also affected by the defect formation energy – an energy found to be substantially lower than predicted by DFT. Furthermore, it is shown that when reaction rates for different relative amounts of reactants are varied, it is possible to identify the rate-limiting reagent and to elucidate an overall scaling relationship that controls the concentration-dependence of the reaction rate. Also, it is demonstrated that global fits across doped and undoped salts can be used to probe both intrinsic and extrinsic vacancy concentrations. This improved understanding of ion exchange mechanisms can be used to accelerate ion exchange reaction rates by orders of magnitude. In conclusion, the techniques demonstrated here can be broadly applied to probe the kinetics and thermodynamics of solid state reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Performance of Heterostructural TaC/AlGaN Schottky Diodes Based on First Principles Electronic Structure Properties

Advances in ultra-wide bandgap materials, such as high Al-content AlxGa1-xN (AlGaN), are essential for next generation power electronics, but the requirement for lattice matched substrates is currently a significant obstacle. Recently, conductive TaC has emerged as a promising virtual substrate for AlGaN heteroepitaxy, with wurtzite (0001) AlxGa1-xN lattice-matched to rocksalt (111) TaC at x ~ 0.5. Thus, understanding and controlling the electronic properties of the TaC/AlGaN interface is key for developing technological applications based on TaC/AlGaN devices. Using density functional theory and electronic structure calculations, we here investigate TaC/Al0.5Ga0.5N interfaces, where we include explicit alloy models in the slab calculations. We predict the Schottky barrier height and the electric field discontinuity resulting from interface charges. Considering all possible combinations of (Ta, C) substrate termination, (Al/Ga, N) nucleation, and (Al/Ga, N) polarity, we construct a chemical potential phase diagram to identify the stable interfaces that can be accessed through variation of the synthesis conditions. The predicted interface electronic properties are implemented in device performance simulations to demonstrate a practical design for a strain-free, high-efficiency TaC/AlGaN Schottky diode with a low barrier height and without interface charges, underscoring the potential of TaC as a substrate for ultra-wide bandgap devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1992

Metric transition

This report describes NASA's metric transition in terms of seven major program elements. Six are technical areas involving research, technology development, and operations; they are managed by specific Program Offices at NASA Headquarters. The final program element, Institutional Management, covers both NASA-wide functional management under control of NASA Headquarters and metric capability development at the individual NASA Field Installations. This area addresses issues common to all NASA program elements, including: Federal, state, and local coordination; standards; private industry initiatives; public-awareness initiatives; and employee training. The concluding section identifies current barriers and impediments to metric transition; NASA has no specific recommendations for consideration by the Congress.

Source record↗
NASA NTRS1986

Aperture plane potential control for thermal ion measurements

The effects produced by the addition of an aperture plane to control the bias around an instrument for low-energy ion measurements on satellites collecting data in the plasmasphere and over the polar cap are analyzed. The analysis is based on the design and functions of the retarding ion mass spectrometer (RIMS) on the DE 1 satellite. The NASA Charging Analyzer Program, which treats the spacecraft as a cylinder, was used to generate one set of predictions. A second model involves solution of the Laplace equation with the spacecraft treated as a sphere. Both models were used to predict the barrier height expected at the aperture in response to the bias induced to offset the potential. Comparisons with plasma data show that in the thin sheath regime of the plasmasphere the detectors act as if the potential is shifted, thereby lowering the energy resolution of the instrument. Outside the plasmasphere the barrier height dominates the spin curve variations more than the potential. Partial potential control is available from induced bias apertures if control is active and guided by electron detectors with sensitivities in the 0.5-50.0 eV energy range.

Olsen, R. C.↗
NASA NTRS2002

Influence of Turbulence on the Restraint of Liquid Jets by Surface Tension in Microgravity Investigated

Microgravity poses many challenges to the designer of spacecraft tanks. Chief among these are the lack of phase separation and the need to supply vapor-free liquid or liquidfree vapor to the spacecraft processes that require fluid. One of the principal problems of phase separation is the creation of liquid jets. A jet can be created by liquid filling, settling of the fluid to one end of the tank, or even closing a valve to stop the liquid flow. Anyone who has seen a fountain knows that jets occur in normal gravity also. However, in normal gravity, the gravity controls and restricts the jet flow. In microgravity, with gravity largely absent, surface tension forces must contain jets. To model this phenomenon, a numerical method that tracks the fluid motion and the surface tension forces is required. Jacqmin has developed a phase model that converts the discrete surface tension force into a barrier function that peaks at the free surface and decays rapidly away. Previous attempts at this formulation were criticized for smearing the interface. This can be overcome by sharpening the phase function, double gridding the fluid function, and using a higher order solution for the fluid function. The solution of this equation can be rewritten as two coupled Poisson equations that also include the velocity. After the code was implemented in axisymmetric form and verified by several test cases at the NASA Glenn Research Center, the drop tower runs of Aydelott were modeled. Work last year with a laminar model was found to overpredict Aydelott's results, except at the lowest Reynolds number conditions of 400. This year, a simple turbulence model was implemented by adding a turbulent viscosity based on the mixing-length hypothesis and empirical measurements of previous works. Predictions made after this change was implemented have been much closer to experimentally observed flow patterns and geyser heights. Two model runs is shown. The first, without any turbulence correction, breaks through the free surface and strikes the far end of the tank. In the second, the turbulence spreads the jet momentum over more of the free surface, enabling the surface tension forces to turn the jet back into the bulk liquid. The model geyser height with the second model is 1.1 cm. This is quite close to the 1.5-cm geyser height measured by Aydelott.

Chato, David J.↗
DOE OSTI2026

Mechanistic Insights into Dinitrogen Reduction to Ammonia in Light-Controlled Nanocrystal:Nitrogenase Complexes

Developing systems that can efficiently capture photon energy and convert this energy into fuels and chemicals requires understanding how to assemble molecular components with diverse functions into complete systems possessing selectivity and efficiency in directing charge carriers to catalytic reactions. There are many challenges to achieving this goal. One promising approach is the development of hybrid systems that combine semiconductor nanocrystals (NCs) for light capture and enzymes as efficient catalysts. Such biohybrid systems capitalize on the tunable electronic and optical properties of NCs while leveraging the unmatched specificity and efficiency of enzymes in catalyzing chemical reactions, thereby offering opportunities to surpass the limitations of each component alone. Here, we focus on recent progress in developing a biohybrid system that combines CdS NCs for photon capture with the enzyme nitrogenase to accomplish light-driven dinitrogen (N 2 ) reduction to ammonia (NH 3 ). Integrating light-harvesting materials with biological catalysts requires a deep understanding of NC properties, protein stability, and electron transfer (ET), making it an inherently multidisciplinary problem. The reduction of N 2 to NH 3 is a challenging reaction, with a high demand in both agriculture and industrial chemical production. This reaction is intrinsically energy intensive, due to the need to activate the N≡N triple bond. The current standard industrial approach to N 2 reduction, the Haber−Bosch reaction, obtains the necessary energy input from fossil fuels, whereas biological systems capable of N 2 reduction utilize the hydrolysis of ATP as their energy source. Replacing these costly, energy-intensive inputs with renewable light energy represents a critical step toward sustainable NH 3 production. Recent progress has demonstrated that semiconductor CdS NCs can be coupled to the catalytic component of nitrogenase, the MoFe protein, to form a biohybrid CdS NC:MoFe protein complex, enabling light-driven N 2 reduction rather than energy input from fossil fuels or ATP. This illustrates how inorganic NCs can functionally replace the natural Fe protein partner, yielding a biohybrid catalyst that enables controlled electron delivery and provides not only light-driven NH 3 production but also new approaches for probing enzyme catalytic function. The CdS NC:MoFe protein biohybrid system enables light-initiated electron delivery at ambient temperature, as well as temperatures below freezing, allowing for stabilization and spectroscopic characterization of key reaction intermediates. These findings highlight how photochemical biohybrids can serve as both functional catalysts and mechanistic probes. Beyond studies of the nitrogenase mechanism, studies of the CdS NC:MoFe system reveal how variables such as NC size, electrostatic binding interactions, and sacrificial electron donors (SEDs) govern complex stability, charge transfer efficiency, and catalytic performance. In addition, studies of nitrogenase and the high activation barrier for N 2 reduction are enabling investigations of new and interesting questions regarding the properties and limitations of NC biocatalysis. In this Account, we describe the key features of CdS NC:MoFe protein biohybrids and the parameters for optimal light-driven N 2 reduction, and how controlling ET with light illuminates the path to new insights into the nitrogenase mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Controlled mechanochemical coupling of anti-junctions in DNA origami arrays

Abstract Allostery is a hallmark of cellular function and important in every biological system. Still, we are only starting to mimic it in the laboratory. Here, we introduce an approach to study aspects of allostery in artificial systems. We use a DNA origami domino array structure which–upon binding of trigger DNA strands–undergoes a stepwise allosteric conformational change. Using two FRET probes placed at specific positions in the DNA origami, we zoom in into single steps of this reaction cascade. Most of the steps are strongly coupled temporally and occur simultaneously. Introduction of activation energy barriers between different intermediate states alters this coupling and induces a time delay. We then apply these approaches to release a cargo DNA strand at a predefined step in the reaction cascade to demonstrate the applicability of this concept in tunable cascades of mechanochemical coupling with both spatial and temporal control.

Science & Technology - Other Topics↗
DOE OSTI2025

Influence of surface chemistry on Li nucleation energetics on graphene-based surfaces

Lithium metal is a promising high-capacity anode material for solid-state batteries, but it typically suffers from poor cyclability. Carbon scaffold hosts have the potential to improve this performance due to their high electronic conductivity and large surface area, which facilitates lithium-ion adsorption and desorption. Scaffold surface chemistry is known to significantly influence performance outcomes, but the details of these interactions are not fully understood. Here, this study employs first-principles simulations to explore lithium transport and nucleation on graphene anodes with various surface chemistries. Using enhanced sampling techniques, ab initio molecular dynamics, and density functional theory calculations, we find that although surface chemistry has a minimal impact on lithium interfacial transport, it influences surface nucleation significantly. Both heteroatom dopants and intrinsic defects lower the nucleation barrier, creating a more favorable environment for lithium nucleation compared to pristine graphene. In addition, our results reveal a complex interplay between surface lithium concentration, lithium transport, and nucleation kinetics. These findings highlight the potential of surface modifications to precisely control nucleation processes on carbon-based anodes and provide design guidance for reducing dendrite formation and improving the cycle life of solid-state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Confinement-Controlled Rearrangements in Dioxolane Upgrading on H-ZSM-5 Revealed by Periodic DFT

Zeolitic Brønsted acid sites catalyze carbocation rearrangements central to upgrading biomass-derived oxygenates. Here we elucidate the mechanism of dioxolane conversion to methyl ethyl ketone and isobutanal on H-ZSM-5 using periodic density functional theory on the MFI model, complemented by ab initio molecular dynamics to probe confinement effects. Dioxolane adsorption at the Brønsted site is followed by protonation-assisted ring opening to form an oxocarbenium intermediate stabilized by the deprotonated framework. From this common intermediate, selectivity is governed by two competing rearrangements, namely, the 1,2-hydride shift with a free-energy barrier of 18.05 kcal mol –1 at 498 K leading toward MEK, and the 1,2-methyl shift with a higher barrier of 25.40 kcal mol –1 leading toward isobutanal. The hydride-shift channel is kinetically preferred over the methyl-shift channel, lowering the isobutanal/MEK ratio below the 3:1 limit expected for equal branching. Adsorption thermodynamics further indicate stronger stabilization of MEK than isobutanal within ZSM-5 channels, suggesting that confinement-controlled binding can bias product distributions in addition to intrinsic rearrangement barriers. These results highlight how Brønsted acidity and pore confinement jointly shape the rearrangement landscape in MFI zeolites.

adsorption↗
DOE OSTI2022

In Situ 29 Si solid-state NMR study of grafting of organoalkoxysilanes to mesoporous silica nanoparticles

We report that since the catalytic activity and the stability of silica-bound organometallic complexes are affected by their interactions with hydroxyl groups on the surface, isolated hydroxyls are often created prior to the introduction of catalytic species. Here, we investigate a method to remove the indigenous hydroxyls and create new isolated hydroxyls by grafting organo-trimethoxysilane (R-TMS) to generate a silicon T 2 site, (≡SiO-) 2 SiR(-OH). We used in situ 29 Si solid-state NMR experiments to monitor the evolution of T n sites, (≡SiO - ) n SiR(-OH) 3-n (n = 1, 2, 3). The study indicates that i) the grafting proceeds in a consecutive manner as T 1 → T 2 → T 3 , and ii) the kinetics depend on the type of functional groups in the silane. However, the rates of T 1 formation and T 2 → T 3 conversion are also controlled to a significant extent by the entropy loss associated to the initial silane binding and the spatial arrangement of surface hydroxyls, respectively. The grafting of R-TMS with a basic functional group leads to a lower concentration of T 1 sites. The nucleophilicity of the functional group facilitates the grafting process by lowering the enthalpy barrier, while the T 1 formation rate is more influenced by the entropy barrier than the T 1 → T 2 conversion rate. Thus, the basic functional group promotes the T 1 → T 2 conversion more than the T 1 formation, resulting in a lower concentration of T 1 sites.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Contact Angle Influence on Geysering Jets in Microgravity Investigated

Microgravity poses many challenges to the designer of spacecraft tanks. Chief among these are the lack of phase separation and the need to supply vapor-free liquid or liquid-free vapor to the spacecraft processes that require fluid. One of the principal problems of phase separation is the creation of liquid jets. A jet can be created by liquid filling, settling of the fluid to one end of the tank, or even closing a valve to stop the liquid flow. Anyone who has seen a fountain knows that jets occur in normal gravity also. However, in normal gravity, the gravity controls and restricts the jet flow. In microgravity, with gravity largely absent, surface tension forces must be used to contain jets. To model this phenomenon, a numerical method that tracks the fluid motion and the surface tension forces is required. Jacqmin has developed a phase model that converts the discrete surface tension force into a barrier function that peaks at the free surface and decays rapidly away. Previous attempts at this formulation were criticized for smearing the interface. This can be overcome by sharpening the phase function, double gridding the fluid function, and using a higher-order solution for the fluid function. The solution of this equation can be rewritten as two coupled Poisson equations that also include the velocity.

Chato, David J.↗
NASA NTRSDate not supplied

Intelligent Change Detection System: Autonomous Intelligent Machine Agent Model Development

NASA’s significant role in facilitating the harmonious integration of unmanned aircraft systems (UAS), with other aerial vehicles operating in the National Airspace System (NAS), has revealed a need for more advanced technological tools than are being utilized currently. This technology would lend itself to significantly assisting Direct-Action Aviation Personnel (DAAP) with the ingress and egress of UAS operations within the NAS. Providing research findings that would reduce technical barriers, associated with UAS-NAS integration, has been a persistent effort by both NASA and the FAA. One such research effort, pursued by NASA’s Transformative Tools and Technologies – Revolutionary Aviation Mobility (T3-RAM) project, is the development of an autonomous intelligent machine (AIM) agent that would aid DAAP functioning as implemented in remote ground control stations (RGCS). This evolution of the “human-machine” symbiosis, within the aviation environment, is necessary for many reasons. For example, there are projections of large increases to the 864,000 registered UAS and 45,000 aviation operations taking place in the NAS each day. With a data output range from 1 to 20 terabytes per flight or each aerial vehicle, which is projected to have proportional rate increase to that of registered UASs. It is evident, that due to the projected increase of UASs and their generated data, the human-agent’s data managing capabilities will be quickly overwhelmed by the enormous amounts of data emanating in the NAS. The research efforts presented in this paper puts forward results from the development, assessment, and verification of a previously conceptualized AIM-Agent that combats actionable-data (information) errors resulting from the visual perception phenomenon known as “change blindness” (CB). CB has been identified as one of the main culprits of information erroring encountered within the ground control station operator (GCSO) community.

Change Blindness↗
DOE OSTI2025

Design of light- and chemically responsive protein assemblies through host-guest interactions

Host-guest (HG) interactions have been widely used to build responsive materials and molecular machines owing to their inherently dynamic nature, interaction specificity, and responsiveness to diverse stimuli. Here, in this work, we have set out to exploit these advantages of HG chemistry in the design of dynamic protein assemblies, using a C 4 symmetric protein, C98 RhuA, as a building block. We show that a C98 RhuA variant individually modified with β-cyclodextrin (βCD) (host) or azobenzene (guest) functionalities can specifically pair with each other to form highly ordered 1D and 2D assemblies. Association and dissociation of βCD RhuA- azo RhuA assemblies can be controlled by UV and visible light as well as by small-molecule modulators of βCD-azobenzene interactions. Kinetics analyses reveal that βCD RhuA- azo RhuA nanotubes assemble without a nucleation barrier, a highly unusual occurrence for helical supramolecular systems. Taken together, our findings provide a compelling example for achieving complex structural and dynamic outcomes in protein assembly through simple chemical design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Certifiably Robust Neural ODE With Learning-Based Barrier Function

Neural Ordinary Differential Equations (ODEs) have gained traction in many applications. While recent studies have focused on empirically increasing the robustness of neural ODEs against natural or adversarial attacks, certified robustness is still lacking. In this work, we propose a framework for training a neural ODE using barrier functions and demonstrate improved robustness for classification problems. Finally, we further provide the first generalization guarantee of robustness against adversarial attacks using a wait-and-judge scenario approach.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

From Modular ADMS to Plug-and-Play Ops: Distribution Grid Operations with Platform-Level Orchestration to Enable Ambitious App Hosting

The core function of the distribution grid is to provide electricity to consumers affordably, reliably, and securely. In pursuing these core objectives, distribution utilities are accountable to customers, regulators, and in some cases, shareholders. Other third parties such as aggregators and microgrids can also have a stake in the smooth operation of the grid. Each of these stakeholders has economic, business, and/or governance objectives that inform their expectations of the distribution grid. This multi-objective, multi-stakeholder environment creates tension that must be reconciled to successfully design and operate the distribution grid. Innovative companies are competing to bring high-tech solutions to electric utilities and their customers that address each of these objectives. Many developers of advanced distribution management systems (ADMS) and distributed energy resource management systems (DERMS) have adopted a modular architecture that allows grid operators to select functions and features according to their individual system needs. A modular platform also allows the solution provider to develop and integrate specific new product modules; however, the need to pursue multiple objectives with a fixed set of controllable devices makes integration expensive whether it is done at the product development stage or the deployment stage. This cost creates a significant barrier to adoption and can lengthen the product to market time of new solutions. To fundamentally address the complexity of system integration for distribution grid operations, the U.S. Department of Energy Office of Electricity has funded the GridAPPS-D project at PNNL, which streamlines integration by contributing to standards development, defining system architecture, applying advanced mathematics, and developing open-source software to demonstrate the concept of an open data-integration platform for distribution operations. The open data-integration platform concept enables system operators and solution providers to deploy ambitious, best-of-breed applications (or apps) without continually reengineering for integration. Ambitious apps developed by different solution providers will inevitably attempt to achieve different control objectives with the same set of controllable devices. If the open platform itself can resolve these conflicts in a way that achieves the best available outcomes for all apps, doesn’t restrict the ambitious design of apps, and ensures safe and secure operations, apps will be able to plug-and-play with the platform at the same time as other ambitious apps. In this paper, we describe a framework called App Deconfliction that empowers a platform to assign setpoints to controllable devices based on the values preferred by different apps (and even external stakeholder entities like customers or aggregators). The App Deconfliction framework is compatible with several methods for determining setpoint values. We present two methods based on game theory that provide a subtle built-in incentive structure for developers to adapt their apps to the fact that they will be operating in a moderated multi-app environment and to favor device setpoints that have the most effect on their objectives over those that have the least effect. Our simulation-based demonstrations have shown that game-theory-based deconfliction can lead to a 7% improvement in control space utilization compared to design-based methods.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

An Interface–Type Memristive Device for Artificial Synapse and Neuromorphic Computing

Interface-type (IT) metal/oxide Schottky memristive devices have attracted considerable attention over filament-type (FT) devices for neuromorphic computing because of their uniform, filament-free, and analog resistive switching (RS) characteristics. The most recent IT devices are based on oxygen ions and vacancies movement to alter interfacial Schottky barrier parameters and thereby control RS properties. However, the reliability and stability of these devices have been significantly affected by the undesired diffusion of ionic species. Herein, a reliable interface-dominated memristive device is demonstrated using a simple Au/Nb-doped SrTiO 3 (Nb:STO) Schottky structure. The Au/Nb:STO Schottky barrier modulation by charge trapping and detrapping is responsible for the analog resistive switching characteristics. Because of its interface-controlled RS, the proposed device shows low device-to-device, cell-to-cell, and cycle-to-cycle variability while maintaining high repeatability and stability during endurance and retention tests. Furthermore, the Au/Nb:STO IT memristive device exhibits versatile synaptic functions with an excellent uniformity, programmability, and reliability. A simulated artificial neural network with Au/Nb:STO synapses achieves a high recognition accuracy of 94.72% for large digit recognition from MNIST database. These results suggest that IT resistive switching can be potentially used for artificial synapses to build next-generation neuromorphic computing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Field Demonstration of the Brick Ontology to Scale up the Deployment of ASHRAE Guideline 36 Control Sequences

Many commercial buildings have a vast network of sensors as part of their building automation systems (BAS) that allows opportunities for energy consumption and cost savings by deploying advanced control sequences. However, this resource is often underutilized since BAS are typically programmed with simple control sequences with limited potential to deliver on these opportunities. The recent availability of ASHRAE Guideline 36 (G36) with advanced HVAC control sequences supports control retrofits in existing buildings to unlock much of the savings potential. However, barriers such as the lack of standard naming convention of building assets and data points, proprietary equipment and BAS, and the inherent uniqueness of buildings and their systems prevent building stakeholders from adopting any “plug-and-play” implementation of G36. Instead, control vendors must often undertake the manual and labor-intensive point mapping process to identify a data stream’s functional and spatial relationship within the HVAC system along with other relevant contexts and map it to the new control sequences. The vendor must carry out the point mapping process in each individual building since the mapping is unlikely to port over to another building. Even for the same building, the point mapping process can occur multiple times if various control vendors implement different control retrofits and/or multiple control retrofits happen over the lifecycle of the building. Then, there is the likelihood that G36 control sequences are programmed uniquely to the building, preventing the same implementation from being reused in another. Therefore, this paper presents a field demonstration of how we leveraged the Brick ontology with BACnet, OpenBuildingControl’s Control Description Language (CDL), and open-source support tools to implement scalable and portable advanced building controls. These tools provide standardized semantic descriptions and relationships of the building’s assets and data points (Brick), standardized communication protocol to read from and write to the building’s BAS (BACnet), and standardized code implementations (CDL) of standardized advanced control strategies (G36). We implemented G36’s hot water supply temperature setpoint reset in a Berkeley, CA building for this field demonstration. This field demonstration aims to show how integrating these tools may streamline the deployment of advanced control sequences such as G36 in a consistent manner regardless of differences found across buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Temperature-dependent dielectric function of tantalum nitride formed by atomic layer deposition for tunnel barriers in Josephson junctions

Here, we report the dielectric functions of insulating tantalum nitride (TaN) films deposited by atomic layer deposition (ALD) on 300 mm Si/SiO 2 substrates to evaluate their suitability as tunnel barriers in tantalum-based Josephson junctions (JJs) for superconducting quantum circuits. Temperature-dependent ellipsometric angles were measured for ALD TaN films with nominal thicknesses of 13 and 25 nm at an incidence angle of 70°, over photon energy ranges of 0.03–0.7 eV (80–300 K) and 0.5–6.5 eV (80–600 K). These data were used to develop a dispersion model for insulating ALD TaN that incorporates a Tauc–Lorentz oscillator with an optical bandgap of 1.5–1.8 eV to describe interband transitions. The extracted dielectric function shows insulating behavior (mid-infrared transparency) at all temperatures and for both film thicknesses tested. In particular, ALD TaN does not exhibit infrared absorption due to free carriers, even at elevated temperatures, consistent with the insulating behavior required for a JJ tunnel barrier. Results from transmission electron microscopy (including selected area electron diffraction) and x-ray diffraction are also discussed. Sputter depth-profile x-ray photoelectron spectroscopy shows an N/Ta ratio of ∼1.2 throughout the film. The lower bandgap, low roughness, and thermal stability of ALD TaN compared to AlO x suggest the possibility of fabricating JJs with thicker barriers while achieving critical current densities required for qubits, enabling improved thickness and composition control, reduced topography, and resistance to aging.

36 MATERIALS SCIENCE↗