Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Constitutive Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Requirements for energy based constitutive modeling in tire mechanics

The history, requirements, and theoretical basis of a new energy based constitutive model for (rubber) material elasticity, hysteresis, and failure are presented. Energy based elasticity is handled by many constitutive models, both in one dimension and in three dimensions. Conversion of mechanical energy to heat can be modeled with viscoelasticity or as structural hysteresis. We are seeking unification of elasticity, hysteresis, and failure mechanisms such as fatigue and wear. An energy state characterization for failure criteria of (rubber) materials may provide this unification and also help explain the interaction of temperature effects with failure mechanisms which are described as creation of growth of internal crack surface. Improved structural modeling of tires with FEM should result from such a unified constitutive theory. The theory will also guide experimental work and should enable better interpretation of the results of computational stress analyses.

Luchini, John R.↗

A finite viscoelastic constitutive model for low to high strain rate response of elastomers with application of strain rate-induced glass transition

Amorphous elastomers exhibit significant rate-stiffening and unique viscous flow characteristics across a wide range of strain rates, often undergoing glass transition above a strain rate threshold. We have developed a thermodynamically-consistent and micromechanically-inspired constitutive model for soft elastomeric materials to capture the rate-dependent stress-strain behavior and hysteresis when subjected to low to high strain rates. Here, our proposed constitutive model encapsulates the viscous flow of materials through molecular motion at low strain rates and local rearrangement and alignment of the molecules trying to overcome the intermolecular resistance at high strain rates, essentially covering the glass transition. We applied our constitutive model to uniaxial compression experiments performed at low and high strain rates for polyborosiloxane (PBS) to identify the material parameters, and subsequently, performed numerical simulations of single and multi-cycle compression, stress relaxation, and small amplitude oscillatory tension-compression. Our analyses indicate that the model predicts higher total energy dissipation with increasing strain rate; however, dissipation associated with molecular relaxation decreases (forming a cusp) because, beyond a crossover strain rate, intermolecular rearrangement and alignment become dominant, which is consistent with the onset of the glass transition. For cyclic loading-unloading, we observed that dissipation over a cycle remains constant at low strain rates but decreases non-monotonically at high strain rates before becoming constant, with the peak stress over the cycle becoming higher, which can be interpreted as more loading being carried elastically by the polymer network as the intermolecular rearrangement process occurs. Additionally, our model was able to predict the qualitative nature of the storage modulus and loss modulus in the limit of small strain over a wide range of frequency sweeps.

36 MATERIALS SCIENCE↗

A Constitutive Model for Long Time Duration Mechanical Behavior in Insensitive High Explosives

An anisotropic constitutive model for the long term dimensional stability of insensitive high explosives is proposed. Elastic, creep, thermal, and ratchet growth strains are developed. Pressure and temperature effects are considered. The constitutive model is implemented in an implicit finite element code and compared to a variety of experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constitutive modeling for isotropic materials

A state-of-the-art review of applicable constitutive models with selection of two for detailed comparison with a wide range of experimental tests was conducted. The experimental matrix contained uniaxial and biaxial tensile, creep, stress relaxation, and cyclic fatigue tests at temperatures to 1093 C and strain rates from .0000001 to .001/sec. Some nonisothermal cycles will also be run. The constitutive models will be incorporated into the MARC finite element structural analysis program with a demonstration computation made for advanced turbine blade configuration. In the code development work, particular emphasis is being placed on developing efficient integration algorithms for the highly nonlinear and stiff constitutive equations. Another area of emphasis is the appropriate and efficient methodology for determing constitutive constants from a minimum extent of experimental data.

Lindholm, U. S.↗

The Constitutive Modeling of Thin Films with Randon Material Wrinkles

Material wrinkles drastically alter the structural constitutive properties of thin films. Normally linear elastic materials, when wrinkled, become highly nonlinear and initially inelastic. Stiffness' reduced by 99% and negative Poisson's ratios are typically observed. This paper presents an effective continuum constitutive model for the elastic effects of material wrinkles in thin films. The model considers general two-dimensional stress and strain states (simultaneous bi-axial and shear stress/strain) and neglects out of plane bending. The constitutive model is derived from a traditional mechanics analysis of an idealized physical model of random material wrinkles. Model parameters are the directly measurable wrinkle characteristics of amplitude and wavelength. For these reasons, the equations are mechanistic and deterministic. The model is compared with bi-axial tensile test data for wrinkled Kaptong(Registered Trademark) HN and is shown to deterministically predict strain as a function of stress with an average RMS error of 22%. On average, fitting the model to test data yields an RMS error of 1.2%

Murphey, Thomas W.↗

Constitutive model fingerprints in medium-amplitude oscillatory shear

Rheologists have expectations for signatures of linear viscoelastic properties, such as shapes of G'(ω) and G"(ω). Medium amplitude (or asymptotically-nonlinear) oscillatory shear (MAOS) provides additional nonlinear rheological information with low dimensional, well-defined material functions. Here, we develop expectations of signatures (or fingerprints) for the four asymptotically-nonlinear material functions associated with MAOS, [e 1 ](ω), [e 3 ](ω), [v 1 ](ω), [v 3 ](ω). Although the linear fingerprints may be identical for different models, the asymptotically-nonlinear fingerprints may be different in magnitude, frequency-scaling, curve shapes, and sign changes. To perform the analysis, we collect/translate a library of available analytical strain-controlled MAOS fingerprints for seven different constitutive models. Using this library, we identify general trends and highlight key differences of asymptotic-nonlinear viscoelasticity. Asymptotic nonlinearities for all models considered here obey the terminal regime inter-relations and frequency scaling predicted by Bharadwaj and Ewoldt. Unlike the positive linear viscoelastic measures, at least one of the four asymptotic nonlinearities changes signs with Deborah number (De). Following sign interpretations of Ewoldt and Bharadwaj, we show that nonlinearities tend to be driven by strain-rates at small De, and by strains at large De, a trend observed for nearly all the constitutive models studied here, the exception being the model for dilute rigid dumbbell suspensions. Some constitutive models exhibit multiple sign changes at intermediate De and there may be no universal behavior of asymptotically-nonlinear fingerprints in this regime. Therefore, frequency-dependent signatures can be material-specific. Furthermore, this will allow inverse problems to infer structure, select models, and fit model parameters using asymptotically-nonlinear signatures. To illustrate this aspect, we demonstrate a fingerprint matching exercise with experimental measurements on a transiently cross-linked hydrogel system. We find that currently available model fingerprints can match the qualitative magnitudes and frequency dependence, but not the signs of the experimental transient network response.

42 ENGINEERING↗

Application of symbolic computations to the constitutive modeling of structural materials

In applications involving elevated temperatures, the derivation of mathematical expressions (constitutive equations) describing the material behavior can be quite time consuming, involved and error-prone. Therefore intelligent application of symbolic systems to faciliate this tedious process can be of significant benefit. Presented here is a problem oriented, self contained symbolic expert system, named SDICE, which is capable of efficiently deriving potential based constitutive models in analytical form. This package, running under DOE MACSYMA, has the following features: (1) potential differentiation (chain rule), (2) tensor computations (utilizing index notation) including both algebraic and calculus; (3) efficient solution of sparse systems of equations; (4) automatic expression substitution and simplification; (5) back substitution of invariant and tensorial relations; (6) the ability to form the Jacobian and Hessian matrix; and (7) a relational data base. Limited aspects of invariant theory were also incorporated into SDICE due to the utilization of potentials as a starting point and the desire for these potentials to be frame invariant (objective). The uniqueness of SDICE resides in its ability to manipulate expressions in a general yet pre-defined order and simplify expressions so as to limit expression growth. Results are displayed, when applicable, utilizing index notation. SDICE was designed to aid and complement the human constitutive model developer. A number of examples are utilized to illustrate the various features contained within SDICE. It is expected that this symbolic package can and will provide a significant incentive to the development of new constitutive theories.

Arnold, Steven M.↗

Constitutive Modeling for Hot Working Behavior of SP-700 Titanium Alloy

In this paper, the constitutive modeling and hot deformation behavior of SP-700 titanium alloy was investigated by performing isothermal hot compression tests in the temperature range of 700-950 °C and strain rates of 0.001, 0.1, and 1 s{sup −1}. The flow curves of the alloy indicated that the yield point phenomenon occurs at strain rates of 0.1 and 1 s{sup −1}. The friction, adiabatic heating, and stroke-rate controlling effects were eliminated from the raw data. Then, three types of phenomenological constitutive models, considering the compensation of strain, were used to predict the flow stresses of the alloy. The correlation coefficients (R{sup 2}) of the measured and predicted results for the power-law, hyperbolic-sine law, and dynamic softening models were found to be 0.9790, 0.9883, and 0.9877, respectively. The corresponding average absolute relative errors (AARE) were 6.3, 5.9, and 7.45%, respectively. The flow softening behavior of SP-700 alloy was modeled using the combined hyperbolic-sine law and dynamic softening model approach. The predicted flow stresses were in a good agreement with the experimental data, indicated that the developed models can accurately characterize flow behavior of the alloy. In addition, the strain-rate sensitivity (m) distribution map of the alloy was obtained by plotting the m-value against temperature and strain rate in the form of a contour map. There was the maximum of m-value (0.36) in the temperature ranges of 700-715 and 837-875 °C, and strain rates of 0.001-0.006 s{sup −1}. The microstructure of hot deformed at 700 °C mainly consists of globularized and lamellar α phase, while dynamic globularization was completed at 800 °C. The hot deformation activation energy of the alloy in α/β region (305.5 kJ mol{sup −1}) was higher than that in single-phase β region (165.2 kJ mol{sup −1}) due to the globularization of lamellar α.

36 MATERIALS SCIENCE↗

Constitutive Modeling of the Flow Stress of GCr15 Continuous Casting Bloom in the Heavy Reduction Process

According to the calculation results of a 3D thermomechanical-coupled finite-element (FE) model of GCr15 bearing steel bloom during a heavy reduction (HR) process, the variation ranges in the strain rate and strain under HR were described. In addition, the hot deformation behavior of the GCr15 bearing steel was studied over the temperature range from 1023 K to 1573 K (750 °C to 1300 °C) with strain rates of 0.001, 0.01, and 0.1 s{sup −1} in single-pass thermosimulation compression experiments. To ensure the accuracy of the constitutive model, the temperature range was divided into two temperature intervals according to the fully austenitic temperature of GCr15 steel [1173 K (900 °C)]. Two sets of material parameters for the constitutive model were derived based on the true stress–strain curves of the two temperature intervals. A flow stress constitutive model was established using a revised Arrhenius-type constitutive equation, which considers the relationships among the material parameters and true strain. This equation describes dynamic softening during hot compression processes. Considering the effect of glide and climb on the deformation mechanism, the Arrhenius-type constitutive equation was modified by a physically based approach. This model is the most accurate over the temperatures ranging from 1173 K to 1573 K (900 °C to 1300 °C) under HR deformation conditions (ignoring the range from 1273 K to 1573 K (1000 °C to 1300 °C) with a strain rate of 0.1 s{sup −1}). To ensure the convergence of the FE calculation, an approximated method was used to estimate the flow stress at temperatures greater than 1573 K (1300 °C).

36 MATERIALS SCIENCE↗

Characteristic constitution model and microstructure of an Al-3.5Cu-1.5Li alloy subjected to thermal deformation

The constitution model and microstructure of 2A97 Al-Li alloy during thermal deformation were investigated. The thermal deformation behavior was dominated by the interaction between work hardening and dynamic softening. The constitution model was constructed to predict the rheology behavior, in which Zener-Holloman equation with a fifth-order polynomial was set to describe the effect of various strains on the material parameters. Processing maps displayed to exist two unstable domains in microstructure (one domain with the temperature range from 300 °C to 370 °C and the strain rate range from 10{sup 0.5} s{sup −1} to 10s{sup −1}, and the other with the temperature range from 380 °C to 500 °C and the strain rate range from 0 s{sup −1} to 10 s{sup −1}). Microstructural characteristics of dynamic recovery (DRV) and dynamic recrystallization (DRX) in the stable domain and local rheology in the unstable domain were observed, respectively. The dynamic precipitation (DPN) of T{sub 1} phases and the interaction between dislocations and Al{sub 20}Cu{sub 2}Mn{sub 3} and Al{sub 3}Zr phases were concluded by high resolution transmission electron microscopy (HRTEM), which was the first experimental evidence for the DPN in 2A97 Al-Li alloy. All these confirmed the occurrence of the continuous dynamic recrystallization during thermal deformation.

36 MATERIALS SCIENCE↗

Anisotropic constitutive model for nickel base single crystal alloys: Development and finite element implementation

A tool for the mechanical analysis of nickel base single crystal superalloys, specifically Rene N4, used in gas turbine engine components is developed. This is achieved by a rate dependent anisotropic constitutive model implemented in a nonlinear three dimensional finite element code. The constitutive model is developed from metallurigical concepts utilizing a crystallographic approach. A non Schmid's law formulation is used to model the tension/compression asymmetry and orientation dependence in octahedral slip. Schmid's law is a good approximation to the inelastic response of the material in cube slip. The constitutive equations model the tensile behavior, creep response, and strain rate sensitivity of these alloys. Methods for deriving the material constants from standard tests are presented. The finite element implementation utilizes an initial strain method and twenty noded isoparametric solid elements. The ability to model piecewise linear load histories is included in the finite element code. The constitutive equations are accurately and economically integrated using a second order Adams-Moulton predictor-corrector method with a dynamic time incrementing procedure. Computed results from the finite element code are compared with experimental data for tensile, creep and cyclic tests at 760 deg C. The strain rate sensitivity and stress relaxation capabilities of the model are evaluated.

Dame, L. T.↗

Constitutive Modeling of Nanotube-Reinforced Polymer Composites

In this study, a technique is presented for developing constitutive models for polymer composite systems reinforced with single-walled carbon nanotubes (SWNT). Because the polymer molecules are on the same size scale as the nanotubes, the interaction at the polymer/nanotube interface is highly dependent on the local molecular structure and bonding. At these small length scales, the lattice structures of the nanotube and polymer chains cannot be considered continuous, and the bulk mechanical properties can no longer be determined through traditional micromechanical approaches that are formulated by using continuum mechanics. It is proposed herein that the nanotube, the local polymer near the nanotube, and the nanotube/polymer interface can be modeled as an effective continuum fiber using an equivalent-continuum modeling method. The effective fiber serves as a means for incorporating micromechanical analyses for the prediction of bulk mechanical properties of SWNT/polymer composites with various nanotube lengths, concentrations, and orientations. As an example, the proposed approach is used for the constitutive modeling of two SWNT/polyimide composite systems.

Odegard, G. M.↗

Constitutive Modeling of Nanotube-Reinforced Polymer Composites

In this study, a technique is presented for developing constitutive models for polymer composite systems reinforced with single-walled carbon nanotubes (SWNT). Because the polymer molecules are on the same size scale as the nanotubes, the interaction at the polymer/nanotube interface is highly dependent on the local molecular structure and bonding. At these small length scales, the lattice structures of the nanotube and polymer chains cannot be considered continuous, and the bulk mechanical properties can no longer be determined through traditional micromechanical approaches that are formulated by using continuum mechanics. It is proposed herein that the nanotube, the local polymer near the nanotube, and the nanotube/polymer interface can be modeled as an effective continuum fiber using an equivalent-continuum modeling method. The effective fiber serves as a means for incorporating micromechanical analyses for the prediction of bulk mechanical properties of SWNT/polymer composites with various nanotube shapes, sizes, concentrations, and orientations. As an example, the proposed approach is used for the constitutive modeling of two SWNT/LaRC-SI (with a PmPV interface) composite systems, one with aligned SWNTs and the other with three-dimensionally randomly oriented SWNTs. The Young's modulus and shear modulus have been calculated for the two systems for various nanotube lengths and volume fractions.

Odegard, G. M.↗

Anisotropic constitutive modeling for nickel base single crystal superalloy Rene N4 at 982 C

A back stress/drag stress constitutive model based on a crystallographic approach to model single crystal anisotropy is presented. Experimental results demonstrated the need for the back stress variable in the inelastic flow equations. Experimental findings suggested that back stress is orientation dependent and controls both strain hardening and recovery characteristics. Due to the observed stable fatigue loops at 1800 F, drag stress is considered constant for this temperature. The constitutive model operated with constraints determined only from tensile data was extensively tested from simple tensile and fatigue to complicated strain hold tests. The model predicted very well under those conditions.

Stouffer, D. C.↗

Elastic/viscoplastic constitutive model for fiber reinforced thermoplastic composites

A constitutive model to describe the elastic/viscoplastic behavior of fiber-reinforced thermoplastic composites under plane stress conditions is presented. Formulations are given for quasi-static plasticity and time-dependent viscoplasticity. Experimental procedures required to generate the necessary material constants are explained, and the experimental data is compared to the predicted behavior.

Gates, T. S.↗

Initial Alloy 709 constitutive models for use with the ASME design by inelastic analysis and EPP+SMT design methods

This report details a preliminary inelastic constitutive model describing the behavior of Alloy 709. This model will serve two purposes: (1) integration into Nonmandatory Appendix HBB-Z of the ASME Boiler & Pressure Vessel Code Section III, Division 5 and (2) extrapolating cyclic test data to difficult to measure conditions for formulating improved creep-fatigue design methods. For both applications, the model must accurately capture the material behavior across a wide range of temperatures and a variety of test conditions, both monotonic and cyclic. For this purpose we adopt a universal model form under consideration to standardize the description of high temperature constitutive models in the ASME Code. This report briefly restates that model form and how we calibrate the model against the test data, summarizes the test database, and validates the final, trained model by comparison to the experimental tests.

36 MATERIALS SCIENCE↗

An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior

This paper developed high-temperature deformation constitutive models for a Ti6Al4V alloy using an empirical-based Arrhenius equation and an enhanced version of the authors’ physical-based EM + Avrami equations. The initial microstructure was a partially equiaxed α + β grain structure. A wide range of experimental data was obtained from hot compression of the Ti6Al4 V alloy at deformation temperatures ranging from 720 to 970 °C, and at strain rates varying from 0.01 to 10 s{sup −1}. The friction- and adiabatic-corrected flow curves were used to identify the parameter values of the constitutive models. Both models provided good overall accuracy of the flow stress. The generalized modified Arrhenius model was better at predicting the flow stress at lower strain rates. However, the model was inaccurate in predicting the peak strain. In contrast, the enhanced physical-based EM + Avrami model revealed very good accuracy at intermediate and high strain rates, but it was also better at predicting the peak strain. Blind sample tests revealed that the EM + Avrami maintained good predictions on new (unseen) data. Thus, the enhanced EM + Avrami model may be preferred over the Arrhenius model to predict the flow behavior of Ti6Al4V alloy during industrial forgings, when the initial microstructure is partially equiaxed.

36 MATERIALS SCIENCE↗

High temperature inelastic constitutive models for the ASME Section III, Division 5 Class A materials

This report describes the exploration of a universal high temperature inelastic constitutive model for use with the ASME Boiler & Pressure Vessel Code Section III, Division 5, Class A design rules. The idea, developed based on feedback from reactor vendors, is to simplify the current bespoke material models for Grade 91, 316H, and Alloy 617 and the new model for Alloy 800H into a simple, single model form. The report describes a new parallel time integration technique implemented in the pyoptmat package which allowed us to explore a wide variety of model forms, searching for a suitable common model. The report then describes preliminary work on models for monontonic deformation and then the development of a set of models suitable for capturing high temperature cyclic deformation. These models are suitable for use with the ASME design rules, except potentially for a narrow, material-specific band of temperatures at the edge of the creep regime. An incremental improvement the current models could overcome this discrepancy and provide a new, simpler set of constitutive model for all four materials.

36 MATERIALS SCIENCE↗