Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Commercial Off The Shelf”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Commercial Off-The-Shelf (COTS) Program: Issues and Results of Upscreening COTS Parts for NASA Flight Hardware

This paper presents The Commercial Off-The-Shelf Program (COTS). The topics of discussion are: 1) Introduction of COTS; 2) MARS01 Program/Requirements; 3) MARS01 COTS Screening Flow; 4) Test Results-Electrical, C-Sam, Burn-In; 5) Value Added Analysis (Risk Reduction); 6) Value Added Analysis (Cost); 7) Impact of COTS ++ Screening; and 8) Summary. This paper is presented in viewgraph form.

Sandor, Mike↗
NASA NTRS2013

Commercial Off-The-Shelf (COTS) Graphics Processing Board (GPB) Radiation Test Evaluation Report

Large round trip communications latency for deep space missions will require more onboard computational capabilities to enable the space vehicle to undertake many tasks that have traditionally been ground-based, mission control responsibilities. As a result, visual display graphics will be required to provide simpler vehicle situational awareness through graphical representations, as well as provide capabilities never before done in a space mission, such as augmented reality for in-flight maintenance or Telepresence activities. These capabilities will require graphics processors and associated support electronic components for high computational graphics processing. In an effort to understand the performance of commercial graphics card electronics operating in the expected radiation environment, a preliminary test was performed on five commercial offthe- shelf (COTS) graphics cards. This paper discusses the preliminary evaluation test results of five COTS graphics processing cards tested to the International Space Station (ISS) low earth orbit radiation environment. Three of the five graphics cards were tested to a total dose of 6000 rads (Si). The test articles, test configuration, preliminary results, and recommendations are discussed.

Salazar, George A.↗
DOE OSTI2020

Use of Commercial Off-The-Shelf Parts with 3-D Printed Connectors for Powered Air Purifying Respirators

This report presents preliminary results from the performance evaluation of a powered air purifying respirator (PAPR) assembled from commercial off-the-shelf (COTS) parts. Cost is a major limiting factor to PAPR adoption in healthcare. Moreover, the lack of standardization for filters and batteries poses a challenge for clinics and hospitals. Rapid prototyping of connectors, both mechanical and electrical, offers a possible solution in addressing both issues. We used 3-D printed connectors to assemble COTS components into a prototype PAPR. Large-scale manufacturing of 3-D printed connectors may be accomplished by converting the computer-aided design (CAD) drawings to pressure-injection molds.

42 ENGINEERING↗
NASA NTRS2001

Flight Computer Processing Avionics for Space Station Microgravity Experiments: A Risk Assessment of Commercial Off-the-Shelf Utilization

NASA/Marshall Space Flight Center (MSFC) is continually looking for ways to reduce the costs and schedule and minimize the technical risks during the development of microgravity programs. One of the more prominent ways to minimize the cost and schedule is to use off-the-shelf hardware (OTS). However, the use of OTS often increases the risk. This paper addresses relevant factors considered during the selection and utilization of commercial off-the-shelf (COTS) flight computer processing equipment for the control of space station microgravity experiments. The paper will also discuss how to minimize the technical risks when using COTS processing hardware. Two microgravity experiments for which the COTS processing equipment is being evaluated for are the Equiaxed Dendritic Solidification Experiment (EDSE) and the Self-diffusion in Liquid Elements (SDLE) experiment. Since MSFC is the lead center for Microgravity research, EDSE and SDLE processor selection will be closely watched by other experiments that are being designed to meet payload carrier requirements. This includes the payload carriers planned for the International Space Station (ISS). The purpose of EDSE is to continue to investigate microstructural evolution of, and thermal interactions between multiple dendrites growing under diffusion controlled conditions. The purpose of SDLE is to determine accurate self-diffusivity data as a function of temperature for liquid elements selected as representative of class-like structures. In 1999 MSFC initiated a Center Director's Discretionary Fund (CDDF) effort to investigate and determine the optimal commercial data bus architecture that could lead to faster, better, and lower cost data acquisition systems for the control of microgravity experiments. As part of this effort various commercial data acquisition systems were acquired and evaluated. This included equipment with various form factors, (3U, 6U, others) and equipment that utilized various bus structures, (VME, PC104, STD bus). This evaluation of hardware was performed in conjunction with a trade study that considered over twenty (20) different factors relevant to the selection of an optimum design approach. These factors included; safety, sizing and timing, radiation hardness and single event upset, power consumption, heat dissipation, size and volume, expected service life, maintainability, heritage, operating systems, requirements for software reuse, availability of compatible interface boards, relative cost, schedule, reliability, EMI/EMC factors, "hot swap" capability, standards for conduction cooling, I/O capabilities, unique carrier requirements and operating system considerations. The approach to evaluate Safety as part of this study included a review of the Preliminary Hazard Analysis (PHA) for each of the experiment designs and a determination of how each hazard could be addressed and eliminated when different processors were selected. This included evaluating various design approaches and trade-offs between fault tolerant designs and fail-safe designs in accordance with NSTS 1700.7B. This will include the results of radiation testing where available. Various operating systems, such as VxWorks, Linux, QNX, and Embedded NT are evaluated and the advantages and disadvantages of their utilization are also addressed. Design implementation strategies for the various operating systems are considered and discussed. This paper presents the results and recommendations from this trade study. Preliminary conclusions from this study are that safety concerns from lack or radiation testing on COTS equipment can be addressed by additional testing and design considerations, the PC104 bus provided adequate I/O for the SDLE and EDSE microgravity experiments, and PC104 bus components offered significant advantages over VME and cPCI for weight and space reductions.

Estes, Howard↗
NASA NTRS2020

Design and Performance of an Open-Source Star Tracker Algorithm on Commercial Off-The-Shelf Cameras and Computers

Recent frustration in finding low size, weight, power (SWaP), cost, and lead time star trackers has driven an internal research and development effort at Johnson Space Center (JSC) in partnership with Rensselaer Polytechnic Institute (RPI) to develop and demonstrate a commercial off-the-shelf (COTS) camera and COTS computer-based star tracker system. A set of open-source algorithms has been developed and their function demonstrated on multiple low-cost COTS single board computers (SBCs) across a variety of operating systems and COTS cameras. The goal of this effort is to release the software and setup guide to the community in order to reduce spacecraft development costs while increasing their capability (perhaps most of interest to low-cost missions like CubeSats). This material will show the high level architecture of the system, detail the algorithm, various tested configurations, and results. Forward work and applications will also be discussed.

Pedrotty, Samuel↗
NASA NTRS2020

Design and Performance of an Open-Source Star Tracker Algorithm on Commercial Off-the-Shelf Cameras and Computers

Recent frustration in finding low size, weight, power (SWaP), cost, and lead time star trackers has driven an internal research and development effort at Johnson Space Center (JSC) in partnership with Rensselaer Polytechnic Institute (RPI) to develop and demonstrate a commercial off-the-shelf (COTS) camera and COTS computer-based star tracker system. A set of open-source algorithms has been developed and their function demonstrated on multiple low-cost COTS single board computers (SBCs) across a variety of operating systems and COTS cameras. The goal of this effort is to release the software and setup guide to the community in order to reduce spacecraft development costs while increasing their capability (perhaps most of interest to low-cost missions like CubeSats). This material will show the high level architecture of the system, detail the algo-rithm, various tested configurations, and results. Forward work and applications will also be discussed.

Pedrotty, Samuel↗
NASA NTRS2000

Do-It-Yourself: A Special Library's Approach to Creating Dynamic Web Pages Using Commercial Off-The-Shelf Applications

Many librarians may feel that dynamic Web pages are out of their reach, financially and technically. Yet we are reminded in library and Web design literature that static home pages are a thing of the past. This paper describes how librarians at the Institute for Defense Analyses (IDA) library developed a database-driven, dynamic intranet site using commercial off-the-shelf applications. Administrative issues include surveying a library users group for interest and needs evaluation; outlining metadata elements; and, committing resources from managing time to populate the database and training in Microsoft FrontPage and Web-to-database design. Technical issues covered include Microsoft Access database fundamentals, lessons learned in the Web-to-database process (including setting up Database Source Names (DSNs), redesigning queries to accommodate the Web interface, and understanding Access 97 query language vs. Standard Query Language (SQL)). This paper also offers tips on editing Active Server Pages (ASP) scripting to create desired results. A how-to annotated resource list closes out the paper.

Relational databases↗
NASA NTRS2009

Commercial off-the-Shelf (COTS) Refractory Material Evaluation

Fondu Fyre (FF) is currently the only refractory material qualified for use in the flame trench at KSC's Shuttle Launch Pads 39A and 39B. However, the material is not used as it was qualified and has undergone increasingly frequent and severe degradation due to the launch blasts. This degradation is costly as well as dangerous for launch infrastructure, crew and vehicle. FF is applied at the pad via the gunnite process, where wetted refractory material is sprayed onto a steel grid mounted on a support structure. The water content in this process can be manually adjusted by operators, causing distinct visual and physical discrepancies among repair areas. Since the application process is unlikely to change for new refractory materials, it is important to understand the effects of water content on commercial off-the-shelf (COTS) refractory materials. The purpose of this study was to evaluate the performance of the FF with respect to various water contents as well as heat treatments, to simulate aging and exposure to the blast. Initial results indicated that different water contents and heat treatments result in distinct differences in crushing strength, apparent porosity and bulk density. However, water content became an insignificant factor in both crush strength and porosity when FF was cured to at least 1500 deg. Additionally, inspection of the material's surface microstructure by scanning electron microscopy indicated distinguishable characteristics for different heat treatment levels. Results from this study will help guide future studies on the development and identification of new refractory materials.

Calle, Luz Marina↗
NASA NTRS2017

Commercial Off-The-Shelf (COTS) Parts Risk and Reliability User and Application Guide

All COTS parts are not created equal. Because they are not created equal, the notion that one can force the commercial industry to follow a set of military specifications and standards, along with the certifications, audits and qualification commitments that go with them, is unrealistic for the sale of a few parts. The part technologies that are Defense Logistics Agency (DLA) certified or Military Specification (MS) qualified, are several generations behind the state-of-the-art high-performance parts that are required for the compact, higher performing systems for the next generation of spacecraft and instruments. The majority of the part suppliers are focused on the portion of the market that is producing high-tech commercial products and systems. To that end, in order to compete in the high performance and leading edge advanced technological systems, an alternative approach to risk assessment and reliability prediction must be considered.

White, Mark↗
DOE OSTI2020

Commercial Off-the-Shelf Flexible Contact Stress Sensor System: Design Thinking and Systems Engineering Assignment

NNSA has a need to measure the contact stress over long-term durations with minimal impact on the element of interest. The sensor and package should have a small footprint, thin, flexible, modular, and preferably commercially available. There exists an opportunity to leverage expertise within LLNL in sensor development to provide a minimally invasive contact stress sensing solution for NNSA and potentially external customers.

42 ENGINEERING↗
NASA NTRS2018

Commercial Off-The-Shelf GPU Qualification for Space Applications

With increased sensor data rates, and limited downlink capability, NASA missions have increased demands for onboard processing for applications ranging from synthetic aperture radar (SAR) data reduction to hyperspectral image processing and recognition, and even artificial intelligence (AI). Graphics Processor Units (GPUs) offer an attractive processing architecture for many of the applications due to their massive parallelism. As no radiation hardened GPU devices currently exist, any near term GPU-based onboard processors must use commercially available devices. To address this need NASA GSFC is collaborating with Cubic Aerospace Incorporated to, (a) characterize the capability of GPUs to meet the demands of a candidate onboard processing application, thereby demonstrating their ability to improve mission performance, reduce spacecraft SWaP, and potentially enable new missions, and (b) evaluate the radiation tolerance of capable COTS GPU devices to determine their suitability for spaceflight applications and understand any mitigations that are needed. A candidate onboard processing image has been prototyped and evaluated on a commercial GPU board and has demonstrated significantly increased processing throughput. Radiation tests for commercial GPU devices are planned for early fiscal year 2019.

Onboard processing↗
NASA NTRS2010

Evaluation of Commercial Off-the-Shelf Sorbents and Catalysts for Control of Ammonia and Carbon Monoxide

Designers of future space vehicles envision simplifying the Atmosphere Revitalization (AR) system by combining the functions of trace contaminant (TC) control and carbon dioxide removal into one swing-bed system. Flow rates and bed sizes of the TC and CO2 systems have historically been very different. There is uncertainty about the ability of trace contaminant sorbents to adsorb adequately in high-flow or short bed length configurations, and to desorb adequately during short vacuum exposures. There is also concern about ambient ammonia levels in the absence of a condensing heat exchanger. In addition, new materials and formulations have become commercially available, formulations never evaluated by NASA for purposes of trace contaminant control. The optimal air revitalization system for future missions may incorporate a swing-bed system for carbon dioxide (CO2) and partial trace contaminant control, with a reduced-size, low-power, targeted trace contaminant system supplying the remaining contaminant removal capability. This paper describes the results of a comparative experimental investigation into materials for trace contaminant control that might be part of such a system. Ammonia sorbents and low temperature carbon monoxide (CO) oxidation catalysts are the foci. The data will be useful to designers of AR systems for future flexible path missions. This is a continuation of work presented in a prior year, with extended test results.

Luna, Bernadette↗
NASA NTRS2013

Evaluation of Commercial Off-the-Shelf Sorbents and Catalysts for Control of Ammonia and Carbon Monoxide

Designers of future space vehicles envision simplifying the Atmosphere Revitalization (AR) system by combining the functions of trace contaminant (TC) control and carbon dioxide removal into one swing-bed system. Flow rates and bed sizes of the TC and CO2 systems have historically been very different. There is uncertainty about the ability of trace contaminant sorbents to adsorb adequately in high-flow or short bed length configurations, and to desorb adequately during short vacuum exposures. There is also concern about ambient ammonia levels in the absence of a condensing heat exchanger. In addition, new materials and formulations have become commercially available, formulations never evaluated by NASA for purposes of trace contaminant control. The optimal air revitalization system for future missions may incorporate a swing-bed system for carbon dioxide (CO2) and partial trace contaminant control, with a reduced-size, low-power, targeted trace contaminant system supplying the remaining contaminant removal capability. This paper describes the results of a comparative experimental investigation into materials for trace contaminant control that might be part of such a system. Ammonia sorbents and low temperature carbon monoxide (CO) oxidation catalysts are the foci. The data will be useful to designers of AR systems for future flexible path missions. This is a continuation of work presented in a prior year, with extended test results.

Luna, Bernadette↗
DOE OSTI2025

Survey Report on Commercial Off-The-Shelf (COTS) Tracking Tools

Radioactive/nuclear (R/N) materials are integral parts of many business sectors such as medicine, industry, and research. In the United States alone, approximately 3 million packages containing R/N materials are shipped annually via highways, rail, air, and water. These materials are utilized in medical diagnostics and treatments, industrial radiography, and scientific research. The secure and efficient transportation of R/N materials is paramount to public safety and national security. Recent incidents involving the loss of R/N materials during transportation highlight significant security and safety concerns. For instance, in December 2024, a package containing four encapsulated Selenium-75 sources was reported lost in transit from the Czech Republic to Madrid, raising alarms about the security of such shipments. Similarly, a Germanium-68 pin source was reported lost in transit in New Jersey in December 2024, underscoring the risks associated with transporting radioactive materials.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
NASA NTRS1990

Integrating Commercial Off-The-Shelf (COTS) graphics and extended memory packages with CLIPS

This paper addresses the question of how to mix CLIPS with graphics and how to overcome PC's memory limitations by using the extended memory available in the computer. By adding graphics and extended memory capabilities, CLIPS can be converted into a complete and powerful system development tool, on the other most economical and popular computer platform. New models of PCs have amazing processing capabilities and graphic resolutions that cannot be ignored and should be used to the fullest of their resources. CLIPS is a powerful expert system development tool, but it cannot be complete without the support of a graphics package needed to create user interfaces and general purpose graphics, or without enough memory to handle large knowledge bases. Now, a well known limitation on the PC's is the usage of real memory which limits CLIPS to use only 640 Kb of real memory, but now that problem can be solved by developing a version of CLIPS that uses extended memory. The user has access of up to 16 MB of memory on 80286 based computers and, practically, all the available memory (4 GB) on computers that use the 80386 processor. So if we give CLIPS a self-configuring graphics package that will automatically detect the graphics hardware and pointing device present in the computer, and we add the availability of the extended memory that exists in the computer (with no special hardware needed), the user will be able to create more powerful systems at a fraction of the cost and on the most popular, portable, and economic platform available such as the PC platform.

Callegari, Andres C.↗
NASA NTRS1994

Using Commercial Off-the-Shelf Software Tools for Space Shuttle Scientific Software

In October 1993, the Astronaut Science Advisor (ASA) was on board the STS-58 flight of the space shuttle. ASA is an interactive system providing data acquisition and analysis, experiment step re-scheduling, and various other forms of reasoning. As fielded, the system runs on a single Macintosh PowerBook 170, which hosts the six ASA modules. There is one other piece of hardware, an external (GW Instruments, Sommerville, Massachusetts) analog-to-digital converter connected to the PowerBook's SCSI port. Three main software tools were used: LabVIEW, CLIPS, and HyperCard: First, a module written in LabVIEW (National Instruments, Austin, Texas) controls the A/D conversion and stores the resulting data in appropriate arrays. This module also analyzes the numerical data to produce a small set of characteristic numbers or symbols describing the results of an experiment trial. Second, a forward-chaining inference system written in CLIPS (NASA) uses the symbolic information provided by the first stage with a static rule base to infer decisions about the experiment. This expert system shell is used by the system for diagnosis. The third component of the system is the user interface, written in HyperCard (Claris Inc. and Apple Inc., both in Cupertino, California).

Groleau, Nicolas↗