Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coding theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

CORONIUM IN THE LABORATORY: MEASURING THE Fe XIV GREEN CORONAL LINE BY LASER SPECTROSCOPY

The green coronal line at 530.3 nm was first observed during the total solar eclipse of 1869. Once identified as emitted by Fe XIV, it became clear that this highly charged ion was typical for the range of temperatures found in coronal plasmas, stellar winds, outflows, and accretion disks. Under these conditions of high ionization, the strongest transitions are in the X-ray, extreme ultraviolet, and ultraviolet wavelength range, with only few optical lines. For these so-called forbidden coronal lines, only scarce laboratory data is available, and even advanced atomic theory codes cannot yet predict their wavelengths with the accuracy required for precise absolute velocity determinations of such plasmas. Here we report on a study of the Fe XIV line, a key coronal transition of a highly charged ion, using laser spectroscopy in an electron beam ion trap, obtaining the first laboratory measurement of 530.2801(4) nm for its rest wavelength. The result enables the determination of absolute line shifts and line broadenings in hot turbulent plasmas and astrophysical environments, with an error bar of only 0.24 km s{sup –1}. In addition, our measurement provides a much-needed benchmark for advanced atomic structure calculations, which are fundamental for astronomy.

79 ASTRONOMY AND ASTROPHYSICS↗

Global linear and nonlinear gyrokinetic simulations of tearing modes

Abstract To better understand multi-scale interactions between global tearing modes and microturbulence in the Madison Symmetric Torus (MST) reversed-field pinch (RFP), the global gyrokinetic code Gene is modified to describe global tearing mode instability via a shifted Maxwellian (SM) distribution consistent with experimental equilibria. The implementation of the SM is tested and benchmarked by comparisons with different codes and models. Good agreement is obtained in code-code and code-theory comparisons. Linear stability of tearing modes of a non-reversed MST discharge is studied. A collisionality scan is performed to the lowest order unstable modes ( n = 5, n = 6) and shown to behave consistently with theoretical scaling. The nonlinear evolution is simulated, and saturation is found to arise from mode coupling and transfer of energy from the most unstable tearing mode to small-scale stable modes mediated by the m = 2 tearing mode. The work described herein lays the foundation for nonlinear simulation and analysis of the interaction of tearing modes and gyroradius-scale instabilities in RFP plasmas.

Physics↗

Adsorption on transition metal surfaces: Transferability and accuracy of DFT using the ADS41 dataset

We present a benchmarking study of adsorption energies on transition metal surfaces computed with select functionals across different density functional theory codes. In addition to gradient corrected functionals, we evaluate the accuracies of representative metaGGAs, including MS2, SCAN, and SCAN+rVV10 , as well as a short-range screened hybrid functional, HSE06. The study shows that the challenge of finding a functional that can simultaneously capture both covalent and noncovalent molecule-surface interactions persists, with no single functional in the benchmarking study with average errors < 0.2 eV. We find that HSE06 on average does not improve the accuracy compared to PBE for the surface chemistry of transition metals. The BEEF-vdW dispersion-corrected generalized gradient approximation (GGA) and the MS2 metaGGA yield the lowest errors in both chemisorption and dispersion energies, demonstrating that moving up the Jacob's ladder of functionals to screened hybrids does not necessarily improve the description of transition metal surface chemistry.

36 MATERIALS SCIENCE↗

mBEEF-vdW: Robust fitting of error estimation density functionals

Here, we propose a general-purpose semilocal/nonlocal exchange-correlation functional approximation, named mBEEF-vdW. The exchange is a meta generalized gradient approximation, and the correlation is a semilocal and nonlocal mixture, with the Rutgers-Chalmers approximation for van der Waals (vdW) forces. The functional is fitted within the Bayesian error estimation functional (BEEF) framework. We improve the previously used fitting procedures by introducing a robust MM-estimator based loss function, reducing the sensitivity to outliers in the datasets. To more reliably determine the optimal model complexity, we furthermore introduce a generalization of the bootstrap 0.632 estimator with hierarchical bootstrap sampling and geometric mean estimator over the training datasets. Using this estimator, we show that the robust loss function leads to a 10% improvement in the estimated prediction error over the previously used least-squares loss function. The mBEEF-vdW functional is benchmarked against popular density functional approximations over a wide range of datasets relevant for heterogeneous catalysis, including datasets that were not used for its training. Overall, we find that mBEEF-vdW has a higher general accuracy than competing popular functionals, and it is one of the best performing functionals on chemisorption systems, surface energies, lattice constants, and dispersion. We also show the potential-energy curve of graphene on the nickel(111) surface, where mBEEF-vdW matches the experimental binding length. mBEEF-vdW is currently available in gpaw and other density functional theory codes through Libxc, version 3.0.0.

36 MATERIALS SCIENCE↗

Hierarchy of multipartite correlations based on concentratable entanglement

Multipartite entanglement is one of the hallmarks of quantum mechanics and is central to quantum information processing. In this work we show that concentratable entanglement (CE), an operationally motivated entanglement measure, induces a hierarchy upon pure states from which different entanglement structures can be experimentally certified. In particular, we find that nearly all genuine multipartite entangled states can be verified through the CE. Interestingly, GHZ states prove to be far from maximally entangled according to this measure. Instead we find the exact maximal value and corresponding states for up to 18 qubits and show that these correspond to extremal quantum error correcting codes. The latter allows us to unravel a deep connection between CE and coding theory. Finally, our results also offer an alternative proof, on up to 31 qubits, that absolutely maximally entangled states do not exist. Published by the American Physical Society 2024

Schatzki, Louis (ORCID:0000000217129148)↗

Quantum Non-Equilibrium Dynamics Prediction of Electronic Transport Coefficients in Non-Linear Regimes

The goal of this work was to develop unique LLNL capabilities for the computational prediction of electrical, optical and thermal transport properties from quantum simulations. Using a recently developed theory of microscopic quantum transport, we were able to model compressed metallic hydrogen and it’s non-linear and out-of-equilibrium contributions in electrical and thermal transport. This theory was implemented in the open-source, real-space time-dependent density functional theory code Octopus. This model is general and widely applicable to high energy density systems that are important to LLNL and NNSA mission areas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Completing the Circuit: Workforce Development for Advanced Building Construction and Grid-Interactive Efficient Buildings

This paper will present key findings from a future-oriented qualitative study investigating likely futures for the next 5-10 years in the architecture, engineering, construction, and operations industry. This research offers an original contribution to the buildings industry by articulating an actionable framework to more effectively build connections between built environment fields. Whereas the ideal of interdisciplinary, research driven practice underlies the approach to pedagogy at many schools of architecture, innovation in the profession, such as the integrated design process, has been limited. This project applies Legitimation Code Theory (LCT) to the analysis of data gathered from interviews and a review of industry reports.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Atomistic theories and Simulations of Multiferroics

The goal of this award was to build a research program aimed at investigating puzzling complex phenomena in multiferroics, that are systems possessing electric and magnetic dipoles. We first emphasized the study of multiferroic nanostructures, that are 0D, 1D, 2D systems as well as superlattices and then also study multiferroics as a whole, i.e., bulks as well. In order to fully understand such complex systems, we also decided to study magnetic systems and ferroelectrics, both in their nanostructure and bulk forms. For that and in addition to use standard Density Functional Theory codes, we developed and used ab-initio tools that are able to model properties of large supercells (about a million atoms nowadays) at finite temperature and for any mechanical and boundary conditions. We also collaborated with experimentalists to fully understand the systems under study. The whole program resulted in 108 publications that are listed at the end of this report. In the following, I will put an emphasis on some publications before the last award period and also indicate a description of the last award period.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of spin-orbit coupling and very large supercells on the description of acceptors in CdTe

Predicting accurate shallow donor and acceptor levels in semiconductors has been quite challenging using periodic boundary conditions as implemented in current density functional theory codes. The reason is that the wave functions associated with the shallow centers are quite extended and are not fully contained in the supercell (typically with a few hundred atoms) so impurities in the periodically repeated image cells interact with each other. Errors of ~0.1 eV are expected, and these are of the same order of magnitude as the ionization energies themselves. In the case of acceptors in CdTe, this problem is exacerbated by the strong spin-orbit coupling that split the Te-related states at the top of the valence band, making the calculations at least 8 times more expensive. CdTe is an important solar-cell material with record high efficiency of 22%. One of the main limiting factors to increasing the efficiency towards the theoretical limit of ~30% is the often reported very low hole concentration. Pushing to the limit of computational capability by using very large supercells with spin-orbit coupling we report the results of hybrid functional calculations of group-V acceptors in CdTe. We show that extrapolation to the dilute limit leads to an interpretation of the experimental data that is qualitatively different from previous DFT and hybrid functional calculation reports. We find that the group-V impurities indeed behave as shallow acceptors and that the corresponding compensating AX-centers are unstable and do not limit p-type doping. We address the differences between our results and previous theoretical predictions and show that our calculated ionization energies predict hole concentrations that are in excellent agreement with recent temperature-dependent Hall measurements on high-quality single-crystal samples.

14 SOLAR ENERGY↗

Principles of error detection and error correction codes

Report is reviewed which considers theoretical basis of groups, rings, fields, and vector spaces, and their relationship to algebraic coding theory. Report serves as summary for engineers and scientists involved in data handling and processing systems.

Perlman, M.↗

Computational wing optimization and comparisons with experiment for a semi-span wing model

A computational wing optimization procedure was developed and verified by an experimental investigation of a semi-span variable camber wing model in the NASA Ames Research Center 14 foot transonic wind tunnel. The Bailey-Ballhaus transonic potential flow analysis and Woodward-Carmichael linear theory codes were linked to Vanderplaats constrained minimization routine to optimize model configurations at several subsonic and transonic design points. The 35 deg swept wing is characterized by multi-segmented leading and trailing edge flaps whose hinge lines are swept relative to the leading and trailing edges of the wing. By varying deflection angles of the flap segments, camber and twist distribution can be optimized for different design conditions. Results indicate that numerical optimization can be both an effective and efficient design tool. The optimized configurations had as good or better lift to drag ratios at the design points as the best designs previously tested during an extensive parametric study.

Waggoner, E. G.↗

Supersonic, nonlinear, attached-flow wing design for high lift with experimental validation

Results of the experimental validation are presented for the three dimensional cambered wing which was designed to achieve attached supercritical cross flow for lifting conditions typical of supersonic maneuver. The design point was a lift coefficient of 0.4 at Mach 1.62 and 12 deg angle of attack. Results from the nonlinear full potential method are presented to show the validity of the design process along with results from linear theory codes. Longitudinal force and moment data and static pressure data were obtained in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.58, 1.62, 1.66, 1.70, and 2.00 over an angle of attack range of 0 to 14 deg at a Reynolds number of 2.0 x 10 to the 6th power per foot. Oil flow photographs of the upper surface were obtained at M = 1.62 for alpha approx. = 8, 10, 12, and 14 deg.

Pittman, J. L.↗

The capacity of the Hopfield associative memory

Techniques from coding theory are applied to study rigorously the capacity of the Hopfield associative memory. Such a memory stores n-tuple of + or - 1s. The components change depending on a hard-limited version of linear functions of all other components. With symmetric connections between components, a stable state is ultimately reached. By building up the connection matrix as a sum-of-outer products of m fundamental memories, it may be possible to recover a certain one of the m memories by using an initial n-tuple probe vector less than a Hamming distance n/2 away from the fundamental memory. If m fundamental memories are chosen at random, the maximum asymptotic value of m in order that most of the m original memories are exactly recoverable is n/(2 log n). With the added restriction that every one of the m fundamental memories be recoverable exactly, m can be no more than n/(4 log n) asymptotically as n approaches infinity. Extensions are also considered, in particular to capacity under quantization of the outer-product connection matrix. This quantized memory-capacity problem is closely related to the capacity of the quantized Gaussian channel.

Mceliece, Robert J.↗

Efficient multiplication algorithms over the finite fields GF(q sup m), where q equals 3,5

Finite field multiplication is central to coding theory. For this application, there is a need for a multiplication algorithm which can be realized easily on VLSI chips. A new algorithm is developed which is based on the Babylonian multiplication technique utilizing tables of squares. This algorithm is applied to the finite fields GF(q sup m), where q equals 3 and 5. It is also shown that this multiplier can be used to compute complex multiplications defined on the direct sum of two identical copies of such Galois fields.

Truong, T. K.↗

Application of probabilistic analysis/design methods in space programs - The approaches, the status, and the needs

The prospective improvement of probabilistic methods for space program analysis/design entails the further development of theories, codes, and tools which match specific areas of application, the drawing of lessons from previous uses of probability and statistics data bases, the enlargement of data bases (especially in the field of structural failures), and the education of engineers and managers on the advantages of these methods. An evaluation is presently made of the current limitations of probabilistic engineering methods. Recommendations are made for specific applications.

Ryan, Robert S.↗

Participatory Technology Assessment for Mars Mission Planning: Public Values and Rationales

Public support and interest are needed to design an ambitious human spaceflight program. However, it is difficult to understand what the public values and would support. And it is even more challenging and rare to consider public views prior to actually developing a mission. Participatory technology assessment (pTA) is a method that aims to understand public preferences and values in order to inform upstream government decision-making. We assess a recently completed experiment in pTA, the "Informing NASA's Asteroid Initiative" project. Through a cooperative agreement with NASA, the Expert and Citizen Assessment of Science and Technology (ECAST) network conducted a pTA-based forum on NASA's Asteroid Initiative and the Journey to Mars. ECAST organized two citizen forums in Phoenix, Arizona and Boston, Massachusetts in November 2014, with a total of 183 citizens selected so as to minimize self-selection biases. This paper focuses on the "Journey to Mars" session, which had the primary goal of soliciting citizen perceptions about different Mars exploration scenarios and mission planning approaches. Citizens were given background information about three potential Mars exploration scenarios that NASA could carry out: 1) Crewed orbital mission to direct robots on the surface of Mars; 2) Short exploratory crewed mission to the surface of Mars; and 3) establishing a permanent settlement. Citizens then engaged in structured facilitated discussions about their preferences among the scenarios and NASA's mission planning approach. Using a grounded theory coding approach, we analyzed participants' written rationales and dialogue about Mars exploration. In general, participants did not show a strong preference for any particular mission profile, but there was a slight preference for the crewed orbital robotics scenario. Participants who supported this approach saw it as the quickest, safest, and least costly road to a successful mission. However, many participants were interested in seeing "boots on the ground," as they believed this would propel scientific advancement, increase excitement about space exploration, and make humans a "two-planet species."

Bertrand, Pierre↗

Evaluation of the use of color-set geometry during lattice physics constants generation for boiling water reactor simulation

Current methods for BWR nuclear design and analysis consist of using lattice physics neutron transport methods to generate the two-group homogenized cross-sections that are then used in a nodal diffusion theory code. The lattice transport solutions are performed for a single assembly with reflective boundary conditions, which is a practical approximation. A method is developed to account for assembly exposure distributions (environment) in the core within the lattice transport calculations with the use of color-sets (2x2) geometry. The loading pattern is examined and an appropriate number of characteristic color-set cells are selected for analysis. Treatment of the co-resident exposed fuel within this method is also presented. The calculation process was followed for a recent BWR cycle design with comparisons being performed on both a lattice and core-wide basis to evaluate the proposed method. The lattice based comparisons show noticeable differences in the pin power distribution predictions, which require further investigation to see how this translates into core performance calculations. The core-wide comparisons show minor differences and are generally in a good agreement, which is expected with this small perturbation. A slight improvement was noticed in the reduction of the power distribution uncertainty. However, given the additional amount of work and computer run time increase, further evaluation, especially of core pin power predictions, is needed to consider this method for production level design and safety analysis calculations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Block-coded communications

Theory for block-coded telemetry systems is useful in testing performance of one- and two-way, phase-coherent telemetry systems when double-conversion, superheterodyne, phase-locked receiver, preceded by bandpass limiter is used to track carrier.

Lindsey, W. C.↗