SEARCH · Engineering Papers

Results for “Chemistry - Inorganic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Correlative analysis of structure and chemistry of Li x FePO 4 platelets using 4D-STEM and X-ray ptychography

Lithium iron phosphate (Li x FePO 4 ), a cathode material used in rechargeable Li-ion batteries, phase separates upon de/lithiation under equilibrium. The interfacial structure and chemistry within these cathode materials affects Li-ion transport, and therefore battery performance. Here, correlative imaging of Li x FePO 4 was performed using four-dimensional scanning transmission electron microscopy (4D-STEM), scanning transmission X-ray microscopy (STXM), and X-ray ptychography in order to analyze the local structure and chemistry of the same particle set. Over 50,000 diffraction patterns from 10 particles provided measurements of both structure and chemistry at a nanoscale spatial resolution (16.6–49.5 nm) over wide (several micron) fields-of-view with statistical robustness. Li x FePO 4 particles at varying stages of delithiation were measured to examine the evolution of structure and chemistry as a function of delithiation. In lithiated and delithiated particles, local variations were observed in the degree of lithiation even while local lattice structures remained comparatively constant, and calculation of linear coefficients of chemical expansion suggest pinning of the lattice structures in these populations. Partially delithiated particles displayed broadly core–shell-like structures, however, with highly variable behavior both locally and per individual particle that exhibited distinctive intermediate regions at the interface between phases, and pockets within the lithiated core that correspond to FePO 4 in structure and chemistry. The results provide insight into the Li x FePO 4 system, subtleties in the scope and applicability of Vegard’s law (linear lattice parameter-composition behavior) under local versus global measurements, and demonstrate a powerful new combination of experimental and analytical modalities for bridging the crucial gap between local and statistical characterization.

25 ENERGY STORAGE↗

DOE OSTI2019

Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries

In the pursuit of higher-energy-density lithium-ion batteries, one big challenge is the stability of high-capacity or high-voltage cathodes with electrolytes. An understanding of how different chemistries interact with high-energy cathodes is required to enable the rational design of coatings or solid electrolyte materials that offer long-term stability with the cathode. Herein, we systematically evaluated the thermodynamic stability among a broad range of solid-state chemistries with common cathodes. Our thermodynamic analyses confirmed that the strong reactivity of lithiated and delithiated cathodes greatly limits the possible choice of materials that are stable with the cathode under voltage cycling. Our computation reaffirmed previously demonstrated coating and solid electrolyte chemistries and suggested several new stable chemistries. In particular, the lithium phosphates and lithium ternary fluorides, which have high oxidation limits, are promising solid-state chemistries stable with high-voltage cathodes. Our research offers guiding principles for selecting materials with long-term stability with high-energy cathodes for next-generation lithium-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2024

The surface chemistry of the atomic layer deposition of metal thin films

Abstract In this perspective we discuss the progress made in the mechanistic studies of the surface chemistry associated with the atomic layer deposition (ALD) of metal films and the usefulness of that knowledge for the optimization of existing film growth processes and for the design of new ones. Our focus is on the deposition of late transition metals. We start by introducing some of the main surface-sensitive techniques and approaches used in this research. We comment on the general nature of the metallorganic complexes used as precursors for these depositions, and the uniqueness that solid surfaces and the absence of liquid solvents bring to the ALD chemistry and differentiate it from what is known from metalorganic chemistry in solution. We then delve into the adsorption and thermal chemistry of those precursors, highlighting the complex and stepwise nature of the decomposition of the organic ligands that usually ensued upon their thermal activation. We discuss the criteria relevant for the selection of co-reactants to be used on the second half of the ALD cycle, with emphasis on the redox chemistry often associated with the growth of metallic films starting from complexes with metal cations. Additional considerations include the nature of the substrate and the final structural and chemical properties of the growing films, which we indicate rarely retain the homogeneous 2D structure often aimed for. We end with some general conclusions and personal thoughts about the future of this field.

Materials Science↗

DOE OSTI2023

Implementation of Chemistry in the Athena++ Code

Chemistry plays a key role in many aspects of astrophysical fluids. Atoms and molecules are agents for heating and cooling, determine the ionization fraction, serve as observational tracers, and build the molecular foundation of life. We present the implementation of a chemistry module in the publicly available magnetohydrodynamic code Athena++ . We implement several chemical networks and heating and cooling processes suitable for simulating the interstellar medium (ISM). A general chemical network framework in the KIDA format is also included, allowing users to easily implement their own chemistry. Radiation transfer and cosmic-ray ionization are coupled with chemistry and solved with the simple six-ray approximation. The chemical and thermal processes are evolved as a system of coupled ordinary differential equations with an implicit solver from the CVODE library. We perform and present a series of tests to ensure the numerical accuracy and convergence of the code. Many tests combine chemistry with gas dynamics, including comparisons with analytic solutions, 1D problems of the photodissociation regions and shocks, and realistic 3D simulations of the turbulent ISM. We release the code with the new public version of Athena++ , aiming to provide a robust and flexible code for the astrochemical simulation community.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

A comparison of lodgepole and spruce needle chemistry impacts on terrestrial biogeochemical processes during isolated decomposition

This study investigates the isolated decomposition of spruce and lodgepole conifer needles to enhance our understanding of how needle litter impacts near-surface terrestrial biogeochemical processes. Harvested needles were exported to a subalpine meadow to enable a discrete analysis of the decomposition processes over 2 years. Initial chemistry revealed the lodgepole needles to be less recalcitrant with a lower carbon to nitrogen (C:N) ratio. Total C and N fundamentally shifted within needle species over time with decreased C:N ratios for spruce and increased ratios for lodgepole. Differences in chemistry correlated with CO 2 production and soil microbial communities. The most pronounced trends were associated with lodgepole needles in comparison to the spruce and needle-free controls. Increased organic carbon and nitrogen concentrations associated with needle presence in soil extractions further corroborate the results with clear biogeochemical signatures in association with needle chemistry. Interestingly, no clear differentiation was observed as a function of bark beetle impacted spruce needles vs those derived from healthy spruce trees despite initial differences in needle chemistry. These results reveal that the inherent chemistry associated with tree species has a greater impact on soil biogeochemical signatures during isolated needle decomposition. By extension, biogeochemical shifts associated with bark beetle infestation are likely driven more by changes such as the cessation of rhizospheric processes than by needle litter decomposition.

Bark Beetle Disturbance↗

DOE OSTI2020

Probing the Radial Chemistry of Getter Components in Light Water Reactors via Controlled Electrochemical Dissolution

Getters are among the key functional components in the Tritium Producing Burnable Absorber Rods (TPBARs) of Light Water Reactors, and are used to capture the released tritium gas. They are cylindrical tubes comprised of the alloy zircaloy-4 which is coated with nickel plating both internally and externally. Their exposure to tritium as well as the irradiation environments in the light water reactors changes their structure, chemical composition and chemistry. Understanding the radial tritium distribution is key to gaining insight into the evolution of new chemistry upon irradiation in order to predict getter performance. Consequently, efforts are underway to devise a method that can allow selective probing into the getter core radially to probe the chemistry akin to carefully and selectively peeling of the layers of an onion. We have recently devised an electrochemical dissolution technique for controlled radial dissolution of zirconium based liners; this work describes the first proof-of-concept demonstration of the applicability of this technique on the controlled radial dissolution of nickel plated getters. The technique is complemented with periodic analysis of the electrolyte solution to measure the rates of release of the various elemental components and therefore glean information on their radial distribution across the getter; further complementary microscopy on the exposed surfaces allows us insight into the chemistry at the getter core.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2023

Perturbation of Tropical Stratospheric Ozone Through Homogeneous and Heterogeneous Chemistry Due To Pinatubo

Abstract The Pinatubo eruption in 1991 injected 10–20 Tg SO 2 into the stratosphere, which formed sulfate aerosols through oxidation. Our modeling results show that volcanic heating significantly perturbs the heterogeneous and homogeneous chemistry including NO x and HO x catalytic cycles in the tropical stratosphere. The simulated tropical chemical ozone tendency is positive at 20 mb while negative at 10 mb in the tropics. The simulated ozone chemical tendency is of the same magnitude as the dynamical ozone tendency caused by the accelerated tropical upwelling, but with the opposite sign. Our study finds that the tropical ozone chemical tendency due to homogeneous chemistry becomes more important than heterogeneous chemistry 3 months after eruption. Sensitivity simulations further suggest that the tropical ozone tendency through heterogeneous chemistry is saturated when the injected amount exceeds 2 Tg.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

The Influence of Environment on Post-Detonation Chemistry and Debris Formation (Abbreviated Final Report: 20-SI-006)

Predicting, responding to, or interpreting the chemical record preserved in debris derived from nuclear events can be challenging due to chemical fractionation. Chemical fractionation is where different species of the evolving radionuclide inventory segregate and/or are lost from the system over the timescales of debris formation. Both historic data and recent research suggest that the interaction and character of the local environment may exert controls on chemical fractionation by influencing the cooling and evolution of the associated fireball as well as the composition of the vapor term and resultant speciation. Prior to this work, an integrated platform permitting dynamic and concurrent consideration of physical and chemical evolution of early time post-detonation event environments did not exist. Our work merged historic data and experimental approaches to support development of a computational framework able to simulate fundamental processes (e.g., entrainment of local environment, oxidation chemistry, and cooling time scales) that may perturb the radionuclide inventory captured in post-detonation debris. Work with historic debris confirmed that entrained environmental material affect debris composition, structure, and radionuclide incorporation. Complementary work utilizing a readily controllable and tunable benchtop setup (a plasma flow reactor) simulated the late cooling of a nuclear fireball (e.g., T < 6000 K) and bounded the sensitivity of actinide speciation and particle size distribution to variations in oxygen concentration and cooling rates. Concurrent laser ablation and laser heating experiments were used to investigate the chemistry and physics of processes occurring in vaporized and/or rapidly heated actinides and other elements in the presence of oxygen. A more computationally efficient microphysical model was developed for predicting and evolving size distributions of particles forming from mixed vapor terms and simulating particle formation processes under a variety of extreme conditions. Continued study of historic nuclear event film confirmed that shockwave data and physics codes agree to within the uncertainty of the data. Good agreement was achieved for thermal emission from an airburst, however the paucity of low-temperature molecular opacity data for mixtures of air, bomb debris, entrained dirt, and water vapor complicate agreement for more elaborate scenarios. A multiphysics code (ALE3D) was modified to bring the necessary physics and chemistry, including these new data and insights, onto a single platform. Code development included improved initialization of large physical systems, modernization of chemistry capabilities, and modifications to enable inclusion of particle transport.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2024

Investigation of Frozen Chemistry for Molten Salt Reactors (MSRs)

Understanding accident progression and the potential/conditions for fission product release from fuel is necessary to evaluate safety for any nuclear reactor system. Molten Salt Reactors (MSRs) under development need such analysis to support safety evaluations. Fission product chemistry specific to MSR concepts is a critical area that introduces distinct considerations relative to the current state-of-knowledge in reactor safety, primarily developed for water-moderated nuclear reactor systems. In Light Water Reactor (LWR) systems, it is necessary to capture the chemical interaction of fission products with the reactor evironment, containment and confinement systems. The overall effects at this point are relatively well understood for the purposes of performing safety evaluations. A key insight from LWR studies is that fission product chemical behavior can be reasonably captured by modeling approaches where the chemistry is "frozen". These modeling approaches assume that radionuclide reaction and speciation can be represented by chemical classes, each with characteristic transport behavior that is invariant under a broad range of thermochemical conditions. However, radionuclides can exhibit a range of behavior in the liquid salt-melt phase of the coolant used in MSRs. Radionuclides, salt, and the metal containment surfaces (i.e. pipes) can co-exist in dynamic equilibrium that could evolve with small system mass changes. A detailed investigation to the degree the equilibrium state can dynamically evolve with changes in the conditions of the molten salt mixture has not been previously conducted. It is currently not well understood where frozen chemistry assumptions are valid. Expanding the state-of-knowledge in this regard is relevant to better assessing the range of chemical effects that should be incorporated as part of MSR safety assessments. This investigation used the Oak Ridge Isotope GENeration (ORIGEN) module of the Standardized Computer-Analysis for Licensing Evaluation (SCALE) code to generate simulated radionuclide inventories for the MSR Experiment (MSRE) and then modeled reactor chemical speciation using the Molten Salt Thermodynamic Database – Thermochemical (MSTDB-TC) coupled with Thermochimica. The effect of composition variation during decay of fission product inventory in a molten salt over a period of 500 days prolonged post- at multiple temperatures was studied. Mass fractions for fluorine and berilium were varied in order to probe the effects of free fluorine control. Finally, speciation of fluoride reactors were showed by comparing MSRE readionuclide inventories with a FLiBe based molten salt breeder reactor (MSBR). The results showed that fission product mass change has little effect on phase mass changes and vapor pressures for fluoride species, but differ with varying carrier and fuel salt compositions. However, iodine species were found to have a vapor pressure not only dependent on temperature, but also the free fluorine potential, releasing iodine when the free fluorine potential is equal to the iodine inventory. This observation, however, arose under free fluorine potentials that are very unlikely to be realized in typical molten salt mixtures. Despite this observation, temperature was found to be the dominant parameter that drove phase change and fission product species vapor pressure. The results indicate that the current frozen chemistry approach is adequate for MSR analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Predicting Radiation-Induced Plutonium Redox Chemistry using Multiscale Modeling Methods

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2024

Predicting Radiation-Induced Plutonium Redox Chemistry using Multi-scale Modeling Methods

Over the the last 70 years plutonium (Pu) has been integral in the development of several technologies that have changed the world, yet our fundamental understanding of its chemistry is still far from complete. This is a testament to this element’s unique and complex properties, such as its ability to coexist as multiple oxidation states in aqueous solution. Careful manipulation of plutonium oxidation states is essential in the study and utilization of its rich chemistry. To achieve this level of control, a comprehensive mechanistic understanding of radiation-induced plutonium redox chemistry is critical due to the unavoidable exposure of plutonium to ionizing radiation fields, both inherent and from in-process applications. For this reason, we have developed an experimentally evaluated multi-scale computer model for the prediction of gamma radiation-induced Pu(IV) redox chemistry in concentrated nitric acid solutions (1.0, 3.0, and 6.0 M). Under these acidic, aqueous solution conditions, cobalt-60 gamma irradiation afforded negligible net change in the steady-state oxidation state distribution of Pu(IV). Multi-scale calculations, which are in excellent agreement with experimental data, indicate that this observation is due to radiation-induced redox cycling between Pu(IV) and Pu(III), as achieved by the reduction of Pu(IV) by radiolytic nitrous acid and hydrogen peroxide, and the oxidation of Pu(III) by nitrate and hydroxyl radicals. These radiation-induced redox processes are augmented by plutonium’s inherent disproportionation reactions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2025

Volumetric Additive Manufacturing of Dormant Catalytic Chemistries to Generate Silicone Micro‐ and Millifluidic Devices and Instant Molds

Tomographic volumetric additive manufacturing (T‐VAM) rapidly prints solid objects within minutes, accessing photochemistries that are traditionally challenging for layer‐based additive manufacturing methods. This includes high‐viscosity materials, air‐free chemistries, and solid‐state systems. Catalytic chemistries are appealing as a pathway to engineering advanced materials, including tough thermosets, silicone elastomers, and complex block copolymers. However, photoactivated dormant catalytic chemistries, where the catalyst irreversibly activates upon exposure to light, are incompatible with typical tomographic VAM approaches. To address this limitation, a zero‐dose optimization strategy is devised to preserve dormant catalysts in desired regions by keeping them unexposed to light. VAM printed micro‐ and millifluidic devices and instant molds are successfully produced within minutes in silicones polymerized using photoactivated dormant platinum photohydrosilylation catalysts. The printed channels are programmed to be 500 and 2500 µm for the micro‐ and millifluidic devices, and print fidelity is assessed by X‐ray computed tomography. This work demonstrates the potential of zero‐dose optimization to expand the range of chemistries accessible for VAM, enabling the rapid fabrication of complex devices.

Additive Manufacturing↗

DOE OSTI2020

Opportunities of Aqueous Manganese-Based Batteries with Deposition and Stripping Chemistry

Rechargeable aqueous manganese-based batteries have been attracting significant attention owing to their advantages of low cost, high safety, and ease of manufacturing, which are promising attributes for grid-scale energy storage applications. However, most traditional manganese-based batteries with solid-state conversion and intercalation reactions suffer from low capacity and poor long-term cycling stability. The recent novel storage mechanism based on cathode Mn 2+ /MnO 2 deposition/stripping chemistry has fundamentally tackled these issues, enabling a new generation of manganese-based batteries with superior electrochemical performance. Here, the recent advances in aqueous manganese-based batteries with the Mn 2+ /MnO 2 deposition/stripping chemistry are reviewed. Furthermore, a summary of the development of manganese-based batteries with different storage mechanisms is provided and new opportunities for the emerging Mn 2+ /MnO 2 chemistry in the latest generation are highlighted. Then, the current understanding of the Mn 2+ /MnO 2 charge storage mechanism and its potential in manganese-based batteries for large-scale energy storage applications is presented. Moreover, insights into opportunities and future directions for manganese-based batteries with the Mn 2+ /MnO 2 chemistry are proposed.

25 ENERGY STORAGE↗

DOE OSTI2023

On the potentially transformative role of auxiliary-field quantum Monte Carlo in quantum chemistry: A highly accurate method for transition metals and beyond

Approximate solutions to the ab initio electronic structure problem have been a focus of theoretical and computational chemistry research for much of the past century, with the goal of predicting relevant energy differences to within “chemical accuracy” (1 kcal/mol). For small organic molecules, or in general, for weakly correlated main group chemistry, a hierarchy of single-reference wave function methods has been rigorously established, spanning perturbation theory and the coupled cluster (CC) formalism. For these systems, CC with singles, doubles, and perturbative triples is known to achieve chemical accuracy, albeit at O(N7) computational cost. In addition, a hierarchy of density functional approximations of increasing formal sophistication, known as Jacob’s ladder, has been shown to systematically reduce average errors over large datasets representing weakly correlated chemistry. However, the accuracy of such computational models is less clear in the increasingly important frontiers of chemical space including transition metals and f-block compounds, in which strong correlation can play an important role in reactivity. A stochastic method, phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC), has been shown to be capable of producing chemically accurate predictions even for challenging molecular systems beyond the main group, with relatively low O(N3 − N4) cost and near-perfect parallel efficiency. Herein, we present our perspectives on the past, present, and future of the ph-AFQMC method. We focus on its potential in transition metal quantum chemistry to be a highly accurate, systematically improvable method that can reliably probe strongly correlated systems in biology and chemical catalysis and provide reference thermochemical values (for future development of density functionals or interatomic potentials) when experiments are either noisy or absent. Finally, we discuss the present limitations of the method and where we expect near-term development to be most fruitful.

Chemistry↗

DOE OSTI2024

Inverse design of pore wall chemistry and topology through active learning of surface group interactions

Design of next-generation membranes requires a nanoscopic understanding of the effect of biologically inspired heterogeneous surface chemistries and topologies (roughness) on local water and solute behavior. In particular, the rejection of small, neutral solutes, such as boric acid, poses a heretofore unsolved challenge. In prior work, a computational inverse design technique using an evolutionary optimization successfully uncovered new surface design strategies for optimized transport of water over solutes in smooth, model pores consisting of two surface chemistries. However, extending such an approach to more complex (and realistic) scenarios involving many surface chemistries as well as surface roughness is challenging due to the expanded design space. In this work, we develop a new approach that uses active learning to optimize in a reduced feature space of surface group interactions, finding parameters that lead to their assembly into ordered, optimal patterns. This approach rapidly identifies novel surface functionalizations that maximize the difference in water and boric acid transport through the nanopore. Moreover, we find that the roughness of the nanopore wall, independent of its chemistry, can be leveraged to enhance transport selectivity: oscillations in the pore wall diameter optimally inhibit boric acid transport by creating energetic wells from which the solute must escape to transport down the pore. Furthermore, this proof-of-concept demonstrates the potential for active learning strategies, in concert with molecular simulations, to rapidly navigate complex design spaces of aqueous interfaces and is promising as a tool for engineering water-mediated surface interactions for a broad range of applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Modeling DOE Standard Canister Configurations with Updated Surface Chemistry

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

Extended Modeling of DOE Sealed Canisters with Updated Chemistry Models

Road-ready and final disposition packaging configurations for the advanced test reactor (ATR) fuel currently specifies storage within helium backfilled DOE sealed standard canisters. The aluminum cladding of the ATR fuel contains an oxyhydroxide layer of boehmite/bayerite that generates hydrogen when subjected to irradiation. Understanding the effect of this hydrogen buildup over time to important for long term storage considerations. Previous modeling efforts have built a coupled CFD-chemical model to simulate the temperature gas phase concentrations within the DOE sealed standard canisters. These models have coupled the temperature conditions to both the gas phase radiolysis chemistry and the surface chemistry associated with the oxyhydroxide layer. The previous iteration of the model utilized constant G-values for the hydrogen generation a 50-year period. This new iteration of the model utilizes new experimental data to update the hydrogen generation rate, as well as increase the simulated time to a 200-year period. Given the half-life assumed for the primary Cs-137 isotope responsible for gamma radiation in the ATR spent fuel, the 200-year period decreases the decay heat and dose rate of the spent fuel by a factor of 100, which combined with the updated chemistry substantially decreases new hydrogen generation. Continued experimental work has identified trends for aluminum surrogate samples with oxyhydroxide layers for tests done at higher dose rates. At low initial doses a fast generation rate of hydrogen occurs which starts to roll over to a lower generation as the total dose applied increase. A small-scale chemical model was built to replicate as mini-canister surrogate system at SRNL as well as for the smaller capsule tests performed at INL. A variety of chemical models to capture this effect were tested, and a back reaction of H radical absorbing onto the surface, or inhibition of the reaction by significant H 2 cover gas were both able to fit both the mini-canister and the small capsule test data. Both kinetic fits were used to generate data from the new 200-year simulation. As additional experiments continue, the kinetic fits may be adjusted to adapt to new data. However, updated data shows that hydrogen atmosphere has little effect on actual generation data, so the model was reverted to use a star-stepped G-value for low-dose and high-dose regions. For the undried fuel case, the three models differ significantly with an end concentration of 1% for back reaction, 4.2% for inhibition, and 13.1% for constant G-value for the nominal scenario. For the dried fuel case, the nominal cases showed end concentrations of 0.23% for back reaction, 1.9% for inhibition, and 4.2% for const G-value for the nominal scenario. For the constant G-value case that is less conservative than the other two, the pressure for undried fuel increases to 1.94 atm over 200 years for the nominal case and 2.11 atm for the high decay heat case. The total hydrogen concentration after 200 years is 4.92% for the low decay heat case and 27.4% for the high decay heat case for undried fuel and is 1.4% and 9.6% for low and high decay heat fuel for the dried fuel case. If small amount of residual air is present, the potential for nitric acid formation of 595, 1568, and 2816 ppm for the lower, nominal, and upper fuel decay heat can occur. At long-term timeframes no significant shift in major species present occurs, so no appreciable amount of oxygen is present in the system. The continued rate of hydrogen generation in the canister occurs at an increase of 0.04% by mole over the final 10 years. Increasing the model range out to 1000 years continues to drop the hydrogen generation rate through decreasing dose rate.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Understanding Ionizing Radiation-Induced Speciation, Chemistry, and Transport in Nuclear Materials

The research to be presented will cover an overview of three projects supported by the United States Department of Energy Office of Science Solar Photochemistry Program: (i) Radiation-Induced Late Actinide Redox Chemistry (2019–2022); (ii) Understanding Radiation-Induced Iodine Speciation, Chemistry, and Transport in High Temperature Molten Salts (2022–2025); and (iii) Radiation-Induced Chemistry of Nuclear Materials (2023–2026). The overarching aim of these distinct projects is to develop a deep fundamental mechanistic understanding of ionizing-radiation-induced processes occurring in solutions over multiple time and length scales. Investigated solutions range from aqueous to organic to molten salt liquids in the presence and absence of ligands and various redox-active ions and molecules, including the actinides. The ultimate goal of these projects is to utilize the new foundational knowledge gained to construct quantitative multiscale computer models with the capacity to predict radiation-induced behavior in complex systems of relevance to nuclear energy technologies and beyond.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗