Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Stabilizing NMC 811 Li-Ion Battery Cathode through a Rapid Coprecipitation Process

Improving the capacity of LiNi x Mn y Co 1-x-y O 2 (NMC) by increasing the Ni content results in materials with poor cycling performance and reduced thermal stability. These problems can be alleviated by creating concentration gradients in the materials, but this requires more expensive batch processing. Herein, a simple process is described that can create a coating that penetrates into the precursor particles, creating unique gradients in the precursor material. The coated material demonstrates improved cycling performance and thermal stability as compared to uncoated materials. Additionally, rapid heating to simulate a thermal runaway event while observing these materials with X-rays gives a deeper understanding of how the coating affects the decomposition process.

25 ENERGY STORAGE↗

Effect of heat treatment on structural and Mössbauer spectroscopic properties of coprecipitated Mn{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} ferrite nanoparticles

Results obtained in a systamatic study by X-ray diffraction and Mösssbauer spectroscopy on the structural and magnetic properties on Mn{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} ferrite nanoparticles heat treated at 200 °C, 500 °C and 800 °C are reported. Average crystallite sizes are estimated to be in the range (2.6nm – 12.8nm). It is observed that crystallite sizes increase with increase in sintering temperature and random variation in lattice parameter was observed. At relatively low sintering temperatures the samples exhibit superparamagnetism and complete ferrite phase was observed at higher heat treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Technetium Removal Using Tc-Goethite Coprecipitation

This report describes the results from laboratory tests performed at Pacific Northwest National Laboratory for the U.S. Department of Energy (DOE) EM-31 Support Program (EMSP) subtask, “Low temperature waste forms coupled with technetium removal using an alternative immobilization process such as Fe(II) treated-goethite precipitation” to increase our understanding of 99Tc long-term stability in goethite mineral form and the process that controls the 99Tc(VII) reduction and removal by the final Fe (oxy)hydroxide forms. The overall objectives of this task were to 1) evaluate the transformation process of Fe (oxy)hydroxide solids to the more crystalline goethite (α-FeOOH) mineral for 99 Tc removal and 2) determine the mechanism that limits 99 Tc(IV) reoxidation in Fe(II)-treated 99 Tc-goethite mineral and 3) evaluate whether there is a long-term 99 Tcoxidation state change for Tc sequestered in the iron solids.

Goethite↗

Coprecipitation of thermal lysine-rich proteinoids with polyribonucleotides

An experimental study was conducted to determine whether the precipitation of thermal proteinoids with homopolynucleotides can serve as a tool for studying the specificities between proteins and polynucleotides. Attention is given to exploring the best means of quantitation of the precipitate and the effect of varying the lysine content and the amount of Mg(2+) on the results. The formation of microparticles was monitored both by turbidity and by the mass of precipitate formed. Only under certain conditions was the turbidity a reliable indication of the amount of precipitate. Increasing concentration of Mg(2+) tended to displace proteinoid from the complex with polynucleotide. The results indicate that the interaction of thermal proteinoids with polynucleotides appears to be a suitable tool for studying specificities of interactions between proteins and nucleic acids.

Lacey, J. C., Jr.↗

The evaporation path of seawater and the coprecipitation of Br- and K+ with halite

Brines and salt were sampled at the Morton Bahamas solar salt production facility on Great Inagua Island in the Bahamas. The brines were analyzed by ion chromatography to define more precisely than heretofore the evaporation path of seawater to the end of the halite facies. At Inagua, calcium carbonate begins to precipitate at a brine concentration factor of 1.8 times that of seawater. Gypsum begins to precipitate at a brine concentration of 3.8 times seawater, and halite at a concentration factor of 10.6. Three of the most concentrated brines from Inagua (40 times seawater) were evaporated further in the laboratory. Magnesium sulfate first precipitated at brine concentrations about 70 times those of seawater, and potassium-bearing phases began to precipitate for these brines at concentrations greater than 90 times those of seawater. The distribution of coefficients of Br- and K+ between brines and halite were determined by combining analytical data for the Inagua brines with measurements of the Br- and K+ content of halites from Inagua and of halite which had precipitated from Inagua brines during storage. The observed average value of DBr- is 0.032, in good agreement with some of the previous measurements. The measured values of DK+ are highly variable (0.001 to 0.021); DK+ for halite precipitated early in the halite facies is in the vicinity of 0.015.

NASA Discipline Exobiology↗

Transformation of Ferrihydrite to Goethite and the Fate of Plutonium

Understanding the interactions between plutonium and iron (oxy)hydroxide minerals is necessary to gain a predictive understanding of plutonium environmental mobility and to evaluate long-term performance of nuclear waste repositories. We investigated the fate of plutonium during the formation of ferrihydrite and its subsequent transformation into goethite. Ferrihydrite was synthesized with varying quantities of Pu(IV) following either a sorption or coprecipitation process; the ferrihydrite was then aged hydrothermally to yield goethite. Additionally, the synthesized materials were characterized via extended X-ray absorption fine structure spectroscopy, transmission electron microscopy, and acid leaching to elucidate the nature of plutonium association with ferrihydrite and goethite. In samples prepared following the sorption method, plutonium was identified in two different forms: a PuO 2 precipitate and a surface-sorbed plutonium complex. For the samples prepared via coprecipitation, no PuO 2 formation occurs in the ferrihydrite precursor and in the goethite experiments where plutonium concentration is ≤1000 ppm (mg kg –1 ). In these coprecipitation products, plutonium is strongly bound to the minerals either via formation of an inner sphere complex, or via an incorporation process. In the coprecipitation experiments, PuO 2 formation only occurs at the highest plutonium concentration (3000 ppm), suggesting that during ferrihydrite transformation into goethite, part of the plutonium can be remobilized to form PuO 2 nanoparticles. Collectively, our results demonstrate that the nature of plutonium associated with the precursor ferrihydrite (adsorbed vs coprecipitated) will have a direct impact on the association of plutonium with its alteration product (goethite). Furthermore, the data illustrate that some properties of plutonium association with the precursor ferrihydrite are retained through the transformation into goethite. These findings show that plutonium strongly associates with iron (oxy)hydroxides formed through coprecipitation processes and in these materials, plutonium can be strongly retained by the iron minerals.

54 ENVIRONMENTAL SCIENCES↗

Phosphate Bonding on Non-crystalline Al/Fe-hydroxide Co-Precipitates

Poorly crystalline minerals have high sorption capacities for environmentally important chemical species, but molecular-level mechanisms of sorption on complex mineral assemblages remain largely unknown. We determined the distribution of orthophosphate (PO{sub 4}) bonding between Al and Fe in relation to structural properties of Al/Fe-hydroxide coprecipitates. Phosphate was sorbed at concentrations between 0.042 and 0.162 mol P mol{sup -1} Al+Fe on coprecipitates containing 0, 20, 50, 75, or 100 mol % of metal as Al. Phosphorus XANES analyses showed preferential bonding of PO{sub 4} for Al on coprecipitates with 20 and 50 mol % Al, and no preference for either metal at 75 mol % Al, consistent with X-ray photoelectron spectroscopy (XPS) analyses of near-surface metal distributions. Structural ordering and the Fe-hydroxide domain size in coprecipitates decreased with increasing Al proportion, as shown by X-ray diffraction (XRD) and Fe EXAFS analyses. Structural interactions in coprecipitates imparted unique PO{sub 4} sorption properties compared with isolated Al- or Fe-hydroxide.

54 ENVIRONMENTAL SCIENCES↗

Nickel-aluminum layered double hydroxides prepared via inverse micelles formation

Nickel-aluminum layered double hydroxides have been prepared by conventional coprecipitation and by coprecipitation in the presence of a surfactant. The solids have been characterised by several physicochemical techniques. Calcination leads to formation of homogeneously dispersed mixed oxides, which have been characterised as well. The colour properties (lightness and chromaticity coordinates) of both series of solids (layered precursors and calcined ones) have been measured. It has been found that both the preparation method and the calcination treatment have an important effect on the luminosity (whiteness/darkness) of the solids, although the effect on the precise chromaticity coordinates (green/red and blue/yellow) is less marked. - Graphical abstract: Nickel-aluminum layered double hydroxides have been prepared by conventional coprecipitation and by coprecipitation in the presence of a surfactant. It has been found that both the preparation method and the calcination treatment have an important effect on the luminosity (whiteness/darkness) of the solids, although the effect on the precise chromaticity coordinates (green/red and blue/yellow) is less marked.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗