Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER 70”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Heat generation above break-even from laser-induced fusion in ultra-dense deuterium

Previous results from laser-induced processes in ultra-dense deuterium D(0) give conclusive evidence for ejection of neutral massive particles with energy >10 MeV u{sup −1}. Such particles can only be formed from nuclear processes like nuclear fusion at the low laser intensity used. Heat generation is of interest for future fusion energy applications and has now been measured by a small copper (Cu) cylinder surrounding the laser target. The temperature rise of the Cu cylinder is measured with an NTC resistor during around 5000 laser shots per measured point. No heating in the apparatus or the gas feed is normally used. The fusion process is suboptimal relative to previously published studies by a factor of around 10. The small neutral particles H{sub N}(0) of ultra-dense hydrogen (size of a few pm) escape with a substantial fraction of the energy. Heat loss to the D{sub 2} gas (at <1 mbar pressure) is measured and compensated for under various conditions. Heat release of a few W is observed, at up to 50% higher energy than the total laser input thus a gain of 1.5. This is uniquely high for the use of deuterium as fusion fuel. With a slightly different setup, a thermal gain of 2 is reached, thus clearly above break-even for all neutronicity values possible. Also including the large kinetic energy which is directly measured for MeV particles leaving through a small opening gives a gain of 2.3. Taking into account the lower efficiency now due to the suboptimal fusion process, previous studies indicate a gain of at least 20 during long periods.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of fast electron jet produced from interaction of intense laser beam with solid target at oblique incidence

Fast electrons generated along target normal direction from the interaction of intense ultrashort Ti:sapphire laser pulses ({lambda}{sub 0} = 800 nm) with planar copper target at 45 Degree-Sign incidence angle have been experimentally studied under different interaction conditions. Angular spread and energy spectrum of the fast electrons was measured for both p- and s-polarized laser irradiation at intensities in the range 4 Multiplication-Sign 10{sup 16}- 4 Multiplication-Sign 10{sup 17} W/cm{sup 2} (for a fixed pulse duration of 45 fs) and for pulse duration in the range 45 fs-1.2 ps (for a fixed laser fluence of 1.8 Multiplication-Sign 10{sup 4} J/cm{sup 2}). The fast electrons were observed consistently along the target normal direction over the entire range of interaction conditions in the form of a collimated jet, within a half cone angle of 20 Degree-Sign . The fast electrons have continuous energy spectrum with effective temperature 290 keV and 160 keV, respectively, for p- and s-polarized 45 fs laser pulse irradiation at intensity 4 Multiplication-Sign 10{sup 17} W/cm{sup 2}. Scaling laws for temperature of fast electrons with laser intensity and pulse duration were obtained. The experimental results have been explained on the basis of laser absorption and fast electron generation through the resonance absorption mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of nickel-copper alloy specimens processed as a part of the M553 sphere forming experiment during the Skylab 1 and 2 flight

Both processed nickel-copper alloy specimens apparently completely melted by the electron beam in the Skylab M512 materials processing facility and either floated free in space, but collided with some smooth flat surface before solidifying, or remained attached to its support post during solidification. Both specimens had a smooth flat area on the surface due to this adherence during solidification. The nominal composition of the alloy before processing in space was 70 percent Ni and 30 percent Cu. Tests show that a considerable amount of copper was lost during processing by evaporation. It was further found that less copper was present in the cap areas, particularly at the surface, than was in the remainder of the specimens. The microchemistry of the dendrites and interdendritic regions, however, is in agreement with the phase diagram for this alloy. The measured densities of these specimens were less than the theoretical density of the alloy due to the amount of porosity present, however, no large voids were found by radiographic techniques.

Hubbard, J. L.↗

Experimental study of the nonlinear diffusion of a magnetic field and skin explosion of cylindrical conductors

The paper presents the results of an experimental study of the skin explosion of cylindrical conductors of diameter 1–3 mm (copper, aluminum, titanium, steel 3, and stainless steel) at a peak magnetic field of 200–600 T. The experiments were carried out on the MIG pulsed power generator at a current of up to 2.5 MA and a current rise time of 100 ns. The surface explosion of a conductor was identified by the appearance of a flash of extreme ultraviolet radiation. A minimum magnetic induction has been determined below which no plasma is generated at the conductor surface. For copper, aluminum, steel 3, titanium, and stainless steel, the minimum magnetic induction has been estimated to be (to within 10%) 375, 270, 280, 220, and 245 T, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements and non-local thermodynamic equilibrium modeling of mid-Z plasma emission

The x-ray yields from laser-irradiated thin foils of iron, copper, zinc, and germanium have been measured in the soft and multi-keV x-ray ranges at the OMEGA laser at the Laboratory for Laser Energetics. The incident laser power had a pre-pulse to enhance the x-ray emission of a 1 ns flat-top main pulse. The experimental results have been compared with post-shot simulations performed with the two-dimensional radiation-hydrodynamics code FCI2. A new non-local thermodynamic equilibrium model, NOO-RAD, have been incorporated into FCI2. In this approach, the plasma ionization state is in-line calculated by the atomic physics NOHEL package. In the soft x-ray bands, both simulations using RADIOM [M. Busquet, Phys. Fluids B 5, 4191 (1993)] and NOO-RAD clearly over-predict the powers and energies measured by a broad-band spectrometer. In one case (the iron foil), the discrepancy between the measured and simulated x-ray output is nevertheless significantly reduced when NOO-RAD is used in the simulations. In the multi-keV x-ray bands, the simulations display a strong sensitivity to the coupling between the electron thermal conductivity and the NLTE models, and for some particular combinations of these, provide a close match to the measured emission. The comparison between the measured and simulated H-like to He-like line-intensity ratios deduced from high-resolution spectra indicates higher experimental electron temperatures were achieved, compared to the simulated ones. Measurements of the plasma conditions have been achieved using the Thomson-scattering diagnostic. The electron temperatures are found to range from 3 to 5 keV at the end of the laser pulse and are greater than predicted by the simulations. The measured flow velocities are in reasonable agreement with the calculated ones. This last finding gives us confidence in our numerical predictions for the plasma parameters, which are over that time mainly determined by hydrodynamics, such as the mass densities and the ion temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chemical and Chemical-Mechanical Polishing of Surface Roughness on L-PBF/GRCop-42 Cu-Cr-Nb Additive Manufactured 10-GHz RF Structures

Laser-based powder bed fusion (L-PBF) allows additive manufacture (AM) of lower hybrid current drive (LHCD) radio-frequency (RF) launchers from Glenn Research Copper, a Cr 2 Nb precipitation-hardened alloy (GRCop-42) in configurations unachievable with conventional machining. Rough surfaces in AM components increase RF losses and lead to arcing in high-power vacuum RF applications. Chemical polishing, chemical-mechanical polishing, or a combination of both were utilized to planarize the internal surfaces of RF structures, resulting in surface roughness as low as R a = 0.2 µm. Refinement in polishing techniques now enables GRCop-42 alloys (4 at. % Cr, 2 at. % Nb) to achieve similar surface roughness to GRCop-84 (8 at. % Cr, 4 at. % Nb) and equivalent cavity losses to extruded oxygen-free copper waveguides at 10 GHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the core gaps formed accidentally during wire explosion

During wire explosion, along with striations (a regular structure with alternating lower and higher density bands), low-density regions the characteristic axial size of which differs substantially from that of striations and can reach 1-2 mm are also observed in the discharge channel. Such irregular structures came to be known as 'gaps' (D. B. Sinars et al., Phys. Plasmas 8, 216 (2001)). In the present study, the mechanism of the formation of core gaps during explosions of 25- and 50-{mu}m-diameter copper and nickel wires in air is investigated. It is shown that the specific energy deposited in the gap region substantially exceeds the average specific energy deposited in the wire material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-optics near the plasma frequency of a CuBr vapor laser

The kinetic parameters of the plasma of a CuBr vapor laser with a molecular hydrogen additive are determined by time measurements of the plasma transmittance at probing frequencies close to the plasma frequency. The measurements were performed across the discharge at frequencies of 94 and 142 GHz within the time interval 2-85 {mu}s. The measurement results are used to calculate the time dependences of the electron density, electron temperature, and electron momentum relaxation time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-assisted chemical-looping combustion: Mechanistic insights into low temperature methane oxidation with CuO

The low-temperature oxidation of CH 4 by CuO in a coaxial, fixed bed, double dielectric barrier discharge (DBD) reactor was investigated with time-dependent species measurements by an electron-ionization molecular beam mass spectrometer (EI-MBMS). In the experiment, 10% methane carried by noble gasses was flown at 50 sccm through 1 g CuO dispersed in quartz wool both under plasma and non-plasma conditions, while time-dependent gas-phase species profiles were collected. Plasma conditions were explored from 300 to 600 °C while the non-plasma conditions were set from 300 to 900 °C. Mechanistic insights into the oxidation of CH 4 by CuO with plasma discharge at lower temperatures (≤ 600 °C) were obtained by quantifying the fuel oxidation, intermediate species, and CO 2 production in comparison to the non-plasma conditions. Here, we observed significant enhancement of fuel oxidation from the plasma discharge between 400 and 500 °C. The CO 2 production at 500 °C with plasma was greater than that at 700 °C without plasma, reducing fuel oxidation temperature by 200+ °C. During tests, three distinct reaction stages were observed: a gas-phase transport limited stage, a surface reaction limited kinetic stage, and an oxygen ion diffusion limited stage. It was observed that plasma greatly improved the reactivity of the second stage at low temperature. In addition, no carbon deposits were observed on the resultant particles, even under the presence of plasma. M. species such as C 4 H 2 and C 6 H 6 not previously observed or predicted in CuO/CH 4 chemical looping were observed, with some species such as CH 3 OH only becoming detectable as total flowrate was increased from 50 to 1500sccm. A non-plasma reaction pathway for CH 4 based the observed species from the MBMS spectrum and previous predictions from reactive molecular dynamics simulations was created, providing a framework from which more complex plasma CuO mechanisms can be crafted from.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extreme water state produced by underwater wire-array electrical explosion

The generation of an extreme water state (130 GPa, 5000 K, and 3.4 g/cm{sup 3}) which is characterized as dense plasma at the axis of a converging shock wave is reported. A 4 kJ pulse generator was used to explode a 40 Cu-wire array, generating a cylindrical shock wave. The measured shock wave trajectory and energy deposited into the water flow were used in hydrodynamic simulations coupled with the equation of state to determine the water parameters. The temperature estimated using the emission data of water in the vicinity of the implosion axis agrees with the simulation results, indicating shock wave symmetry in such extreme conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray crystal spectrometer for opacity measurements in the 8-18 A spectral range at the LULI laser facility

An x-ray crystal spectrometer was built in order to measure opacities in the 8-18 A spectral range with an average spectral resolution of <{lambda}/{delta}{lambda}>{approx}400. It has been successfully used at the LULI-2000 laser facility (See C. Sauteret, rapport LULI 2001, 88 (2002) at Ecole Polytechnique (France) to measure in the same experimental conditions the 2p-3d transitions of several elements with the neighboring atomic number Z: Fe, Ni, Cu, and Ge [G. Loisel et al., High Energy Density Phys. 5, 173 (2009)]. Hence, a spectrometer with a wide spectral range is needed. This spectrometer features two lines of sight. In this example, one line of sight looks through the sample and the other one is looking directly at the backlighter emission. Both are outfitted with a spherical condensing mirror. A TlAP crystal is used for spectral dispersion. Detection is made with an image plate Fuji BAS TR2025, which is sensitive to x rays. We present some experimental results showing the performances of this spectrometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Research on a logarithmically bent Laue crystal analyzer for X-ray monochromatic backlight imaging

A new logarithmically bent Laue imaging crystal analyzer (LBLICA) was proposed to obtain the monochromatic image of plasmas and exhibited a great potential for application in the Inertial Confinement Fusion experiment over a large field of view (FOV) and with a high spatial resolution. The imaging geometry of the LBLICA has been discussed. According to the Bragg condition and the equation of the logarithmic spiral, the key image parameters of the crystal analyzer, including the system magnification, the spatial resolution, and the FOV, have been analyzed theoretically. An experiment has been performed with a Cu target X-ray tube as a backlighter to backlight a mesh grid consisting of 50-μm Cu wires, and the monochromatic image of the grid has been obtained with a spatial resolution of approximately 30 μm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Collimated fast electron beam generation in critical density plasma

Significantly collimated fast electron beam with a divergence angle 10° (FWHM) is observed when an ultra-intense laser pulse (I = 10{sup 14 }W/cm{sup 2}, 300 fs) irradiates a uniform critical density plasma. The uniform plasma is created through the ionization of an ultra-low density (5 mg/c.c.) plastic foam by X-ray burst from the interaction of intense laser (I = 10{sup 14 }W/cm{sup 2}, 600 ps) with a thin Cu foil. 2D Particle-In-Cell (PIC) simulation well reproduces the collimated electron beam with a strong magnetic field in the region of the laser pulse propagation. To understand the physical mechanism of the collimation, we calculate energetic electron motion in the magnetic field obtained from the 2D PIC simulation. As the results, the strong magnetic field (300 MG) collimates electrons with energy over a few MeV. This collimation mechanism may attract attention in many applications such as electron acceleration, electron microscope and fast ignition of laser fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a Novel Variable Geometry Divertor for Tokamaks

The divertor is a key component of fusion reactors, allowing exhaust of gas, impurities, and helium ash to preserve plasma purity. The divertor geometry strongly affects plasma performance, and it is designed to be compatible with different plasma shapes in present-day fusion experiments. Here, we present a novel concept for a variable geometry divertor, in which the divertor baffle tiles are reorientable by external actuation. Implementation of this concept in a medium-sized research tokamak would uniquely provide the flexibility to tailor divertor geometry to the plasma configuration and also enable study of the effect of divertor closure on plasma performance. To ensure compatibility with typical tokamak operations, the adjustable divertor must withstand the effects of significant mechanical and thermal stresses such as MW/m 2 -scale heat fluxes and large electromagnetic fields, e.g., disruption forces. The technological solutions for actuation mechanisms, cooling system, gas baffling and plasma-facing components are assessed. A functional reduced-scale model with movable outer divertor target baffle tiles is developed and the actuation mechanism is tested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasi-optics near the plasma frequency of a CuBr vapor laser

The kinetic parameters of the plasma of a CuBr vapor laser with a molecular hydrogen additive are determined by time measurements of the plasma transmittance at probing frequencies close to the plasma frequency. The measurements were performed across the discharge at frequencies of 94 and 142 GHz within the time interval 2-85 {mu}s. The measurement results are used to calculate the time dependences of the electron density, electron temperature, and electron momentum relaxation time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation on spectral-energy efficiency of femtosecond laser ablation of metals

Results of investigation on spectral-energy thresholds, rates, and mass flow rates of laser ablation of structural materials (Cu, Ti, Zr, Nb, Mo) of high-energy photonics are presented. The data were obtained by means of an experimental diagnostic module developed for study of multifactor interaction processes between UV-near IR femtosecond laser pulse radiation and condensed media in vacuum.

36 MATERIALS SCIENCE↗

A simple theoretical approach to calculate the electrical conductivity of nonideal copper plasma

A simple theoretical approach to calculate the electrical conductivity of partially ionized nonideal copper plasma is introduced. The densities of plasma species are calculated, to machine accuracy, including electronic excitation and allowing for high ionization states up to the atomic number of the element. Depression of ionization energies is taken into account using an interpolation formula that is valid over a wide range of densities. The formula yields the results of the Debye-Hueckel and the ion-sphere models at the limiting boundaries of low and high densities, respectively. The nonideal Coulomb logarithm is represented by an analytic wide-range formula supplemented by a specially tailored cutoff parameter. Effects of excluding excited and high ionization states on the calculation of ionization equilibrium and electrical conductivity of copper are investigated and assessed. Computational results of the electrical conductivity are compared with results from other theoretical models and available experimental measurements and showed reasonable agreement. A discussion about the choice of the ion-sphere radius is included and concerns about thermodynamic inconsistency when using the modified nonideal Saha equations are discussed and cleared.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗