Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Method of junction formation for CIGS photovoltaic devices

Sulfur is used to improve the performance of CIGS devices prepared by the evaporation of a single source ZIS type compound to form a buffer layer on the CIGS. The sulfur may be evaporated, or contained in the ZIS type material, or both. Vacuum evaporation apparatus of many types useful in the practice of the invention are known in the art. Other methods of delivery, such as sputtering, or application of a thiourea solution, may be substituted for evaporation.

Delahoy, Alan E↗

CIGS Material and Device Stability: A Processing Perspective (Presentation)

This is a general overview of CIGS material and device fundamentals. In the first part, the basic features of high efficiency CIGS absorbers and devices are described. In the second part, some examples of previous collaboration with Shell Solar CIGSS graded absorbers and devices are shown to illustrate how process information was used to correct deviations and improve the performance andstability.

14 SOLAR ENERGY↗

Methods of forming CIGS films

Methods for forming CIGS films are provided. According to an aspect of the invention, a method of forming a CIGS film includes a precursor step, which includes simultaneously evaporating Cu, In, Ga, Se, and Sb onto a substrate. The Se is incident on the substrate at a rate of at least 20 .ANG./s. The method also includes a selenization step, which includes evaporating Se over the substrate after the precursor step.

36 MATERIALS SCIENCE↗

Commercialization of High Efficiency Low Cost CIGS Technology Based on Electroplating: Final Technical Progress Report, 28 September 2007 - 30 June 2009

This report describes SoloPower's work as a Photovoltaic Technology Incubator awardee within the U.S. Department of Energy's Solar Energy Technologies Program. The term of this subcontract with the National Renewable Energy Laboratory was two years. The project focused on SoloPower's electrodeposition-based copper indium gallium (di)selenide (CIGS) technology. Under this subcontract, SoloPowerimproved the quality of its flexible metal substrates, increased the size of its solar cells from 0.5 cm2 to 120 cm2, increased the small-area cell efficiencies from near 11% to near 14%, demonstrated large-area cells, and developed a module manufacturing process.

14 SOLAR ENERGY↗

Measurement of Relaxation Time of Excess Carriers in Si and CIGS Solar Cells by Modulated Electroluminescence Technique

Excess carrier lifetime plays a crucial role in determining the efficiency of solar cells. In this paper, we use the frequency dependence of inphase and quadrature components of modulated electroluminescence (MEL) to measure the relaxation time (decay) of excess carriers. The advantage of the MEL technique is that the relaxation time is obtained directly from the angular frequency at which the quadrature component peaks. It does not need knowledge of the material parameters like mobility, etc., and can be used for any finished solar cells which have detectable light emission. The experiment is easy to perform with standard electrical equipment. For silicon solar cells, the relaxation time is dominated by recombination and hence, the relaxation time is indeed the excess carrier lifetime. In contrast, for the CIGS solar cells investigated here, the relaxation time is dominated by trapping and emission from shallow minority carrier traps.

14 SOLAR ENERGY↗

Alternative device structures for CIGS-based solar cells with semi-transparent absorbers

Here in this work, we discuss two alternative structures of CIGS-based solar cells, a bi-facial configuration and a back-wall configuration. One of the critical issues in these structures is fabrication of a transparent back contact which facilitates not only ohmic contact for holes in the valance but also an effective reflector for electrons in the conduction band. In order to meet these requirements of the transparent back contact, a p-type amorphous Si (p-a-Si)/intrinsic amorphous Si (i-a-Si) bi-layer was deposited onto the ITO back contact. Absorber films were formed by a metal precursor reaction in H 2 Se and H 2 S, and their thicknesses were adjusted to about 0.25 µm to enhance current collection from back-side illumination. The resulting devices with a bi-facial structure of SLG/ITO/p-Si/i-Si/Cu(In, Ga)(Se,S) 2 /CdS/i-ZnO/ITO/Ni-Al exhibited a comparable open-circuit voltage to a Cu(In, Ga)(Se,S) 2 cell on a Mo substrate in tests with illumination of both sides. Back-wall cells with a structure of SLG/ITO/p-Si/i-Si/Cu(In, Ga)(Se,S) 2 /CdS/i-ZnO/Ag-reflector were also fabricated and improved current collection by greater light trapping was achieved compared to the bi-facial cell with back-side illumination.

14 SOLAR ENERGY↗

Development of coring procedures applied to Si, CdTe, and CIGS solar panels

Most of the research on the performance and degradation of photovoltaic modules is based on macroscale measurements of device parameters such as efficiency, fill factor, open-circuit voltage, and short-circuit current. Our goal is to develop the capabilities to allow us to study the degradation of these parameters in the micro- and nanometer scale and to relate our results to performance parameters. To achieve this objective, the first step is to be able to access small samples from specific areas of the solar panels without changing the properties of the material. In this paper, we describe two coring procedures that we developed and applied to Si, CIGS, and CdTe solar panels. In the first procedure, we cored full samples, whereas in the second we performed a partial coring that keeps the tempered glass intact. The cored samples were analyzed by different analytical techniques before and after coring, at the same locations, and no damage during the coring procedure was observed.

14 SOLAR ENERGY↗

Comparison of CIGS solar cells made with different structures and fabrication techniques

Cu(In, Ga)Se2 (CIGS)-based solar cells from six fabricators were characterized and compared. The devices had differing substrates, absorber deposition processes, buffer materials, and contact materials. The effective bandgaps of devices varied from 1.05 to 1.22 eV, with the lowest optical bandgaps occurring in those with metal-precursor absorber processes. Devices with Zn(O, S) or thin CdS buffers had quantum efficiencies above 90% down to 400 nm. Most voltages were 250-300 mV below the Shockley-Queisser limit for their bandgap. Electroluminescence intensity tracked well with the respective voltage deficits. Fill factor (FF) was as high as 95% of the maximum for each device's respective current and voltage, with higher FF corresponding to lower diode quality factors (~1.3). An in-depth analysis of FF losses determined that diode quality reflected in the quality factor, voltage-dependent photocurrent, and, to a lesser extent, the parasitic resistances are the limiting factors. As a result, different absorber processes and device structures led to a range of electrical and physical characteristics, yet this investigation showed that multiple fabrication pathways could lead to high-quality and high-efficiency solar cells.

14 SOLAR ENERGY↗

Study on the Humidity Susceptibility of Thin-Film CIGS Absorber

The report summarizes the research on the susceptibility of a thermally co-evaporated CuInGaSe2 (CIGS) thin-film absorber to humidity and its consequence on composition, morphology, electrical and electronic properties, and device efficiency.

14 SOLAR ENERGY↗

Cell-level reliability testing procedures for CIGS photovoltaics

The reliability of photovoltaics is commonly studied at the module level. Many reliability problems originate from module attributes, such as metal interconnections to cells, junction boxes. However, significant work in reliability can also be done prior to module design. Testing for reliability earlier in the research cycle increases the probability of avoiding common module reliability problems before cell changes are implemented on a large scale. Cell-level reliability studies can thus lower the rates of module failures in the field and provide confidence to investors that new technologies will perform as advertised. This report summarizes how we investigated three reliability concerns in Cu(In,Ga)Se 2 (CIGS) photovoltaics at the cell level: metastability, shading-induced damage, and potential-induced degradation (PID). We find that examining these concerns required developing robust measurement protocols including the fabrication of novel testing structures. This information will allow readers to incorporate sound metrics for investigating reliability phenomena and aid their studies of cell and module reliability improvements.

14 SOLAR ENERGY↗

Cost and Reliability Improvement for CIGS-Based PV on Flexible Substrate: May 24, 2006 -- July 31, 2010

Global Solar Energy rapidly advances the cost and performance of commercial thin-film CIGS products using roll-to-roll processing on steel foil substrate in compact, low cost deposition equipment, with in-situ sensors for real-time intelligent process control. Substantial increases in power module efficiency, which now exceed 13%, are evident at GSE factories in two countries with a combinedcapacity greater than 75 MW. During 2009 the average efficiency of cell strings (3780 cm2) was increased from 7% to over 11%, with champion results exceeding 13% Continued testing of module reliability in rigid product has reaffirmed extended life expectancy for standard glass product, and has qualified additional lower-cost methods and materials. Expected lifetime for PV in flexible packagescontinues to increase as failure mechanisms are elucidated, and resolved by better methods and materials. Cost reduction has been achieved through better materials utilization, enhanced vendor and material qualification and selection. The largest cost gains have come as a result of higher cell conversion efficiency and yields, higher processing rates, greater automation and improved control inall process steps. These improvements are integral to this thin film PV partnership program, and all realized with the 'Gen2' manufacturing plants, processes and equipment.

14 SOLAR ENERGY↗

Technology Transfer of the CIGS Technology from the Laboratory to the PVMC: Cooperative Research and Development Final Report, CRADA Number CRD-12-496

PVMC, Inc. (PVMC) and Contractor (NREL) will work together under a CRADA, through a distinct statement of work (SOW) for each project. Each SOW will be negotiated as a modification of the CRADA between PVMC and NREL with a principal investigator (PI) identified by the contractor so as to define specific tasks and funding that reflect the scope and objectives of that project. Projects will focus on extended collaborations with well-defined, long-term goals that are mutually beneficial to PVMC and NREL. Projects under the CRADA may fall within the areas listed below in the summary of research results, calling upon the NREL capabilities and expertise. Modification 1: The first year of the CRADA will involve training PVMC personnel in the deposition process of the layers in the CIGS device based on the evaporation process, characterization methods used to track the properties of the films, device fabrication and integration of the layers into device compatible with the PVMC approach, and use standard ex-situ characterization tools, and standard and novel in-situ metrology tools for process characterization to insure that the unit films in the MDF facility have the properties defined above in the unit step evaluation. The scope of the CRADA statement of work is based on knowledge already in the literature and/or in background published IP. Modification 2: NREL loaned Ocean Optics spectrometer to PVMC. This was returned on 2/15/2018. Modification 3: The work under this CRADA is aimed at understanding several process effects on silicon wafers and/or solar cells. These include: (i) effects of wafering by diamond wire sawing on the surface damage and the strength of wafers, (ii) electronic characteristics of dielectric-Si interfaces, and (iii) characteristics of Si-Al interfaces formed during firing of silicon solar cells.

14 SOLAR ENERGY↗

EE&RE; Session: CIGS (Presentation)

This project supports the Solar America Initiative by carrying out work on target topics identified for Photovoltaic Systems: (1) Improving cell and module efficiency of thin film Cu(In,Ga)Se2 materials; (2) Implementing the Science and Technology Facility (S&TF) and the Process Development and Integration Laboratory (PDIL) to facilitate laboratory/industry interaction in developing PV manufacturing technologies; (3) Addressing industrial issues in materials and manufacturing processes with the objective to lower the cost of PV power; (4) Providing technology transfer efforts to accelerate transition of thin film PV technology to market and deployment; (5) Assisting R&D efforts to asses and improve reliability and stability of thin film PV products; and (6) Assist the SAI TPPs in technical matters related to CIGS PV technology.

14 SOLAR ENERGY↗

STAR FORMATION IN THE EXTENDED GASEOUS DISK OF THE ISOLATED GALAXY CIG 96

We study the Kennicutt-Schmidt star formation law and efficiency in the gaseous disk of the isolated galaxy CIG 96 (NGC 864), with special emphasis on its unusually large atomic gas (H I) disk (r{sub Hmathsci}/r{sub 25} = 3.5, r{sub 25} = 1.'85). We present deep Galaxy Evolution Explorer near- and far-UV observations, used as a recent star formation tracer, and we compare them with new, high-resolution (16''or 1.6 kpc) Very Large Array H I observations. The UV and H I maps show good spatial correlation outside the inner 1', where the H I phase dominates over H{sub 2}. Star-forming regions in the extended gaseous disk are mainly located along the enhanced H I emission within two (relatively) symmetric, giant gaseous spiral arm-like features, which emulate an H I pseudo-ring at r {approx_equal} 3'. Inside this structure, two smaller gaseous spiral arms extend from the northeast and southwest of the optical disk and connect to the previously mentioned H I pseudo-ring. Interestingly, we find that the (atomic) Kennicutt-Schmidt power-law index systematically decreases with radius, from N {approx_equal} 3.0 {+-} 0.3 in the inner disk (0.'8-1.'7) to N = 1.6 {+-} 0.5 in the outskirts of the gaseous disk (3.'3-4.'2). Although the star formation efficiency (SFE), the star formation rate per unit of gas, decreases with radius where the H I component dominates as is common in galaxies, we find that there is a break of the correlation at r = 1.5r{sub 25}. At radii 1.5r{sub 25} < r < 3.5r{sub 25}, mostly within the H I pseudo-ring structure, regions exist whose SFE remains nearly constant, SFE {approx_equal} 10{sup -11} yr{sup -1}. We discuss possible mechanisms that might be triggering the star formation in the outskirts of this galaxy, and we suggest that the constant SFE for such large radii (r > 2r{sub 25}) and at such low surface densities might be a common characteristic in extended UV disk galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

H I ASYMMETRIES IN THE ISOLATED GALAXY CIG 292

We present Expanded Very Large Array (EVLA) D-array observations of the 21 cm line of neutral hydrogen (H I) of CIG 292, an isolated SA(s)b galaxy at a distance of {approx}24.3 Mpc. From previous H I single dish observations the galaxy was known to have a mildly asymmetric H I profile (A {sub flux} = 1.23 {+-} 0.3). Our EVLA observations show there is {approx}12% more H I projected south of the optical center (approaching velocities) than in the north (receding velocities), despite the H I extending {approx}16% further to the north than the south. The H I projected within the optical disk must have been perturbed within the H I relaxation time ({approx}10{sup 8} yr) which implies that this cannot have been caused by any of the three nearest companions, as their distance ({approx}0.5 Mpc) is too large. Neither H I-rich companions nor tidal tails were found within our field of view and velocity range covered. Our kinematical data suggest that the inner part harbors an oval distortion whereas the outer regions show signs of a modest warp. The mild asymmetry in the H I global profile thus actually masks stronger asymmetries in the two-dimensional distributions of gas and star-forming regions in this galaxy. Since the galaxy is isolated, this must predominantly be due to processes related to its formation and secular evolution.

79 ASTRONOMY AND ASTROPHYSICS↗