Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CHI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Initial Results from High-Field-Side Transient CHI Start-Up on QUEST

Transient coaxial helicity injection (t-CHI) current start-up using a new design simple electrode configuration has been implemented on the QUEST. Discharges injected from the low field side (LFS) and from the high field side (HFS) were examined. Compared to the LFS injection case, the HFS injection has the advantages of providing access to a higher toroidal field and better controlling the location of the injector flux footprint location. Although the present PF coils on QUEST are not well positioned to form the injector flux on the HFS injector region and there has been a frequent occurrence of the spurious arcs, known as absorber arcs, HFS injection has shown flux evolution in a shape that is suitable for the formation of closed flux surfaces. The discharges were improved by installing an in-vessel-coil and adding a new cylindrical electrode to the existing CHI electrode. Overall, the results show that the new cylindrical electrode allowed the flux to evolve stably while allowing both the inner and the outer injector flux footprint to remain in the vicinity of the cylindrical electrode. This configuration which inherently generates a narrow injector flux footprint width resulted in discharges that strongly suggested the persistence of the CHI generated plasma after the injector current was reduced to zero. These studies have informed us of the need to improve the CHI gas injection system so that the absorber arcs could be better controlled in the HFS injection configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Covariance of PFNS Results from the Chi-Nu Experiment

The prompt fission neutron spectrum (PFNS) from neutron-induced fission is a fundamental quantity for the behavior of nuclear reactors, and has been measured many times on a wide variety of nuclei and covering different ranges of incident and emitted neutron energies. However, results from past measurements are frequently called into question in modern nuclear data evaluations because of a lack of thorough experimental documentation and incomplete uncertainty analyses. The Chi-Nu experiment at Los Alamos National Laboratory was designed to produce high-precision measurements of the PFNS of major actinides over a wide range of incident and emitted neutron energies, and with the documentation and covariance analysis required to ensure that the results of this experiment maintain their impact long into the future, thereby avoiding this pitfall of past measurements. In this work we describe the Chi-Nu experiment along with summaries of the treatment of and methods developed to address two important components of the analysis of Chi-Nu data: random-coincidence backgrounds and MCNP simulations. Furthermore, we describe the first results for correlations not just between all data points collected on a single target nucleus, but also between all data points from separate Chi-Nu measurements on 235 U and 239 Pu. These correlations are important for accurately calculating ratios of the PFNS from one actinide to another, which are rare and can be informative for nuclear data evaluation efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Study of {chi}{sub cj} Decays at BES III

In spring 2009 BES III has taken its first large data sample on the {psi}(2S) resonance. More than 1{center_dot}10{sup 8} {psi}(2S) decays have been recorded. First results on the analyses {chi}{sub cJ{yields}{pi}}{sup 0{pi}0}, {chi}{sub cj{yields}{eta}{eta}} and {chi}{sub cj{yields}{phi}{phi}} are presented. The decay mode {chi}{sub c1{yields}{phi}{phi}} has been observed for the first time. The results presented in this document are preliminary.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design considerations for optimizing the transient CHI injector on QUEST

Transient coaxial helicity injection (transient CHI) on the QUEST (Q-shu University Experiment with Steady-State ST) spherical tokamak (ST) has recently validated the floating biased electrode configuration for solenoid-free plasma startup. In support of a significant divertor upgrade on QUEST, the details of the transient CHI injector geometry on QUEST have been examined more closely using tokamak simulation code (TSC) simulations. QUEST uses a HIT-II-like (Helicity Injected Torus) injector configuration in which the injector region is comprised of coaxial injector electrodes located in the lower part of the machine. TSC simulations indicate high injector flux operation may benefit from an increased gap between the coaxial electrodes. This is the first study to examine the differences between an open and closed electrode configuration for solenoid-free plasma startup using transient CHI. Results show that both configurations can generate similar levels of closed flux, but the closed configuration may be easier to implement in some ST designs as a much smaller portion of the injector needs to be close to the injector flux coil. Results show that increasing the electrode gap width from the present 10.8 cm to about 15–20 cm would increase the closed flux fraction by about 40%. The results presented in this paper are generally applicable to the CHI design for other STs.

coaxial helicity injection↗

Central exclusive production of the scalar {chi}{sub c} meson at the Fermilab Tevatron, BNL RHIC, and CERN LHC energies

We calculate several differential distributions for exclusive double-diffractive {chi}{sub c}(0{sup ++}) production in the proton-antiproton collisions at the Tevatron and in proton-proton collisions at RHIC and LHC. We use unintegrated gluon distributions (UGDFs) within the k{sub t}-factorization approach. The g*g*{yields}{chi}{sub c}(0{sup ++}) transition vertex is calculated as a function of gluon virtualities via the standard perturbative nonrelativistic QCD technique. The off shell effects are discussed and quantified. They lead to a reduction of the cross section by a factor of 2-5, depending on the position in the phase space and UGDFs. Different models of UGDFs are used and the results are shown and discussed. The cross section for the diffractive component depends strongly on UGDFs. Transverse momentum distribution of {chi}{sub c}(0) shows a well localized minimum. We calculate also the differential distributions for the {gamma}*{gamma}*{yields}{chi}{sub c}(0{sup ++}) fusion mechanism. The integrated cross section for photon-photon fusion is much smaller than that of diffractive origin. The two components have very different dependence on the momentum transfers t{sub 1}, t{sub 2} in the nucleon lines as well as azimuthal-angle correlations between both outgoing nucleons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Factorization and next-to-leading-order QCD correction in e{sup +}e{sup -}{yields}J/{psi}({psi}(2S))+{chi}{sub c0}

In nonrelativistic QCD, we study e{sup +}e{sup -}{yields}J/{psi}({psi}(2S))+{chi}{sub c0} at B factories, where the P-wave state {chi}{sub c0} is associated with a S-wave state J/{psi} or {psi}(2S). In contrast to the failure of factorization in most cases involving P-wave states, e.g. in B decays, we find that factorization holds in this process at next-to-leading order (NLO) in {alpha}{sub s} and leading order in v, where the associated S-wave state plays a crucial rule in canceling the infrared divergences. We also give some general analyses for factorization in various double charmonium production. The NLO corrections in e{sup +}e{sup -}{yields}J/{psi}({psi}(2S))+{chi}{sub c0} at {radical}(s)=10.6 GeV are found to substantially enhance the cross sections by a factor of about 2.8; hence crucially reducing the large discrepancy between theory and experiment. With m{sub c}=1.5 GeV and {mu}=2m{sub c}, the NLO cross sections are estimated to be 17.9(11.3) fb for e{sup +}e{sup -}{yields}J/{psi}({psi}(2S))+{chi}{sub c0}, which reach the lower bounds of the experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inclusive {chi}{sub bJ}(nP) decays to D{sup 0}X

Using {upsilon}(2S) and {upsilon}(3S) data collected with the CLEO III detector we have searched for decays of {chi}{sub bJ} to final states with open charm. We fully reconstruct D{sup 0} mesons with p{sub D{sup 0}}>2.5 GeV/c in three decay modes (K{sup -}{pi}{sup +}, K{sup -}{pi}{sup +}{pi}{sup 0}, and K{sup -}{pi}{sup -}{pi}{sup +}{pi}{sup +}) in coincidence with radiative transition photons that tag the production of one of the {chi}{sub bJ}(nP) states. Significant signals are obtained for the two J=1 states. Recent nonrelativistic QCD (NRQCD) calculations of {chi}{sub bJ}(nP){yields}ccX depend on one nonperturbative parameter per {chi}{sub bJ} triplet. The extrapolation from the observed D{sup 0}X rate over a limited momentum range to a full ccX rate also depends on these same parameters. Using our data to fit for these parameters, we extract results which agree well with NRQCD predictions, confirming the expectation that charm production is largest for the J=1 states. In particular, for J=1, our results are consistent with ccg accounting for about one-quarter of all hadronic decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Branching fractions for {chi}{sub cJ{yields}}pp{pi}{sup 0}, pp{eta}, and pp{omega}

Using a sample of 25.9x10{sup 6} {psi}(2S) decays acquired with the CLEO-c detector at the CESR e{sup +}e{sup -} collider, we report branching fractions for the decays {chi}{sub cJ{yields}}pp{pi}{sup 0}, pp{eta}, and pp{omega}, with J=0, 1, 2. Our results for B({chi}{sub cJ{yields}}pp{pi}{sup 0}) and B({chi}{sub cJ{yields}}pp{eta}) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measurement of B({chi}{sub cJ{yields}}pp{omega}).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

{chi}{sup 2} versus median statistics in supernova type Ia data analysis

In this paper we compare the performances of the {chi}{sup 2} and median likelihood analysis in the determination of cosmological constraints using type Ia supernovae data. We perform a statistical analysis using the 307 supernovae of the Union 2 compilation of the Supernova Cosmology Project and find that the {chi}{sup 2} statistical analysis yields tighter cosmological constraints than the median statistic if only supernovae data is taken into account. We also show that when additional measurements from the cosmic microwave background and baryonic acoustic oscillations are considered, the combined cosmological constraints are not strongly dependent on whether one applies the {chi}{sup 2} statistic or the median statistic to the supernovae data. This indicates that, when complementary information from other cosmological probes is taken into account, the performances of the {chi}{sup 2} and median statistics are very similar, demonstrating the robustness of the statistical analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Design, Installation and Performance of the New insulator for NSTX CHI Experiments

Coaxial Helicity Injection (CHI), a non-inductive method to initiate plasma and generate toroidal plasma current, is being investigated in the National Spherical Torus Experiment (NSTX). The center stack and outer vacuum vessel are separated by insulating gaps at the top and bottom of the slim central column so that a high voltage (up to 2 kV) can be applied between them from a pulsed power supply or a capacitor bank to initiate an arc discharge. In the presence of a suitable poloidal magnetic field, the discharge is initiated at the lower gap (the injector gap) and because of the strong toroidal field develops a helical structure resulting in substantial toroidal plasma current being driven. In NSTX, up to 390 kA of toroidal current has been generated for an injected current of 25 kA. The early investigations of CHI however frequently developed arcs across the insulator at the top of the machine (the absorber gap), which terminated the desired discharge. This arcing greatly restricted the operational space available for CHI studies. During 2002, the absorber region was modified to suppress these arcs. The new design includes a new ceramic insulator on the high field side of the absorber region with a much longer tracking distance between conducting elements at the different potentials. Furthermore, two new coils were installed near the absorber to provide the ability to minimize the poloidal field connecting the center stack and outer vacuum vessel. During the subsequent experimental campaign, CHI operation was less prone to arcing in the absorber and those arcs that did occur did not terminate the main discharge.)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the appropriateness of applying chi-square distribution based confidence intervals to spectral estimates of helicopter flyover data

The validity of applying chi-square based confidence intervals to far-field acoustic flyover spectral estimates was investigated. Simulated data, using a Kendall series and experimental acoustic data from the NASA/McDonnell Douglas 500E acoustics test, were analyzed. Statistical significance tests to determine the equality of distributions of the simulated and experimental data relative to theoretical chi-square distributions were performed. Bias and uncertainty errors associated with the spectral estimates were easily identified from the data sets. A model relating the uncertainty and bias errors to the estimates resulted, which aided in determining the appropriateness of the chi-square distribution based confidence intervals. Such confidence intervals were appropriate for nontonally associated frequencies of the experimental data but were inappropriate for tonally associated estimate distributions. The appropriateness at the tonally associated frequencies was indicated by the presence of bias error and noncomformity of the distributions to the theoretical chi-square distribution. A technique for determining appropriate confidence intervals at the tonally associated frequencies was suggested.

Rutledge, Charles K.↗

Multichannel astrometric photometer-based parallaxes of evolved stars - Chi Cygni, 51 Andromedae, and OP Andromedae

Using data from Allegheny Observatory's Thaw/MAP astrometric system, absolute parallaxes are presented for Chi Cygni, 51 Andromedae, the newly discovered RS CVn variable OP Andromedae, and selected stars in these fields. Using existing angular diameter measures and the new parallaxes, linear diameters for Chi Cygni and 51 And are given. Chi Cygni has a perturbation in declination having a period of 0.75 yr and an amplitude of +/- 5 mas. Owing to the extreme variability of Chi Cygni, no further characterization of the system is possible at this time. Other results of spectral interest include the detection of a perturbation in the motion of BD +47 deg 466. This system was found to have a parallax of 14.4 +/- 1.2 mas.

Stein, John W.↗

Establishing Trust in NASA’s Artemis Program Computer-Human Interface (CHI) Implementation

The NASA Artemis program will return humans to the moon. This time, with the help of commercial and international partners, the program’s objective is a permanent moon base. The moon base infrastructure, including an orbiting moon station and moon surface assets, will be developed for astronauts to stay for the long haul to learn to live and work on another planet in preparation for an eventual Humans-to-Mars mission. As the roundtrip communication delays increase in deep space exploration, more onboard systems autonomy and functionality will be needed to maintain and control the vehicle or habitat. These mission constraints will change the current Earth-based spacecraft ground control support approach that will demand more safe, efficient, and effective Computer-Human Interface (CHI) control. For Artemis, CHI is defined as the elements that the crew interfaces with-audio, video, lighting, and crew controls. Understanding how CHI will need to evolve to support deep space missions will be critical for the Artemis program-especially crew controls which is the focus of this paper. How does NASA ensure crew controls are reliable to control complex systems and prevent a catastrophic event due to human error-especially when the astronauts could be physiologically and/or psychologically impaired? NASA’s approach to mitigating catastrophic hazards in human spaceflight system development such as crew controls is through a holistic system engineering and Human System Integration methodology that embraces NASA’s Human-Rating Requirements-ensuring human performance characteristics to control/safely recover the crew from hazardous situations within the human interface design are considered. This paper discusses, at a high level, CHI for the Artemis program. Next, a discussion of what it means to human-rate a space system crew controls and how trust in the human-computer interface begins with the NASA human rating requirements. Finally, a discussion on how systems engineering, and the human system integration process ensures that crew control implementation incorporates the NASA human-rating requirements.

Human-Rating↗

Establishing Trust in NASA’s Artemis Campaign Computer-Human Interface (CHI) Implementation

The NASA Artemis program will return humans to the Moon. This time, with the help of commercial and international partners, the program's objective is a permanent moon base. The moon base infrastructure, including an orbiting moon station and moon surface assets, will be developed for astronauts to stay for the long haul to learn to live and work on another planet in preparation for an eventual Humans-to-Mars mission. As the roundtrip communication delays increase in deep space exploration, the crew will need more onboard systems autonomy and functionality to maintain and control the vehicle or habitat. These mission constraints will change the current Earth-based spacecraft to ground control support approach that will demand more safe, efficient, and effective Computer-Human Interface (CHI) control. For Artemis, CHI is defined as the elements that the crew interfaces with: audio, video, lighting, and crew controls subsystems. Understanding how CHI will need to evolve to support deep space missions will be critical for the Artemis program--especially crew controls, which is the focus of this paper. How does NASA ensure crew controls are reliable enough to control complex systems and prevent a catastrophic event due to human error--especially when the astronauts could be physiologically and/or psychologically impaired? NASA's approach to mitigating catastrophic hazards in human spaceflight system development such as crew controls, is through a holistic system engineering and Human System Integration methodology that focuses on incorporating NASA's Human-Rating Requirements-that ensures human performance characteristics to control/safely recover the crew from hazardous situations within the human interface design are considered. This paper discusses, at a high level, CHI for the Artemis program. Next, a discussion of what it means to human-rate a space system crew controls and how trust in the human-computer interface begins with the NASA human rating requirements. Finally, a discussion on how systems engineering and the human system integration process ensures that crew control implementation incorporates the NASA human-rating requirements.

artemis↗

Establishing Trust in NASA’s Artemis Campaign Computer-Human Interface (CHI) Implementation

The NASA Artemis program will return humans to the Moon. This time, with the help of commercial and international partners, the program's objective is a permanent moon base. The moon base infrastructure, including an orbiting moon station and moon surface assets, will be developed for astronauts to stay for the long haul to learn to live and work on another planet in preparation for an eventual Humans-to-Mars mission. As the roundtrip communication delays increase in deep space exploration, the crew will need more onboard systems autonomy and functionality to maintain and control the vehicle or habitat. These mission constraints will change the current Earth-based spacecraft to ground control support approach that will demand more safe, efficient, and effective Computer-Human Interface (CHI) control. For Artemis, CHI is defined as the elements that the crew interfaces with: audio, video, lighting, and crew controls subsystems. Understanding how CHI will need to evolve to support deep space missions will be critical for the Artemis program--especially crew controls, which is the focus of this paper. How does NASA ensure crew controls are reliable enough to control complex systems and prevent a catastrophic event due to human error--especially when the astronauts could be physiologically and/or psychologically impaired? NASA's approach to mitigating catastrophic hazards in human spaceflight system development such as crew controls, is through a holistic system engineering and Human System Integration methodology that focuses on incorporating NASA's Human-Rating Requirements-that ensures human performance characteristics to control/safely recover the crew from hazardous situations within the human interface design are considered. This paper discusses, at a high level, CHI for the Artemis program. Next, a discussion of what it means to human-rate a space system crew controls and how trust in the human-computer interface begins with the NASA human rating requirements. Finally, a discussion on how systems engineering and the human system integration process ensures that crew control implementation incorporates the NASA human-rating requirements.

artemis↗

Chi-Nu Level 2 Review

This series of slides presents information on Chi-Nu measurements and analysis of prompt fission neutron spectra (PFNS) for neutron energy below 1 MeV for 235 U. A key focus of the Chi-Nu measurement is to address the energy dependence of the low-energy emissions. The 235 U PFNS evaluation is in progress. Chi-Nu delivered preliminary experimental data and input for part of the old experimental data base. The 239 Pu PFNS evaluation is finalized and submitted for testing. Data from 252 Cf spontaneous fission will also be obtained.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identification of sigma and chi phases in duplex stainless steels

The aim of this work is to find out the most suitable method for detecting and analyzing accurately the formation conditions of secondary phases, particularly Sigma-phase (σ-phase) and Chi-phase (χ-phase) in duplex stainless steels (UNS S32205 and UNS S32750). The microstructure was characterized after a solution annealing at 1080 °C followed by an isothermal heating at 830 °C for different time ranges, ranging from 1 min to 9 h, in order to enlighten the controversial point concerning the mechanism of χ-phase nucleation in relation with the σ-phase. Etched samples were observed using optical microscopy (MO), and scanning electron microscopy (FESEM) with a backscattered electron detector (BSE) was used on unetched samples. Compositional microanalysis (EDS) was carried out for identifying the different phases present in the steels. Sigma phase was easily observed using different etching procedures, whereas χ-phase was only clearly detected with FESEM–BSE on unetched samples. The compositional analyses showed that the molybdenum content in χ-phase almost doubles the content of this element in σ-phase, and as a result the kinetics of nucleation and growth were also found to be remarkably faster when the alloy content in the steel is higher. In addition, chromium nitrides and carbides were also observed to precipitate as a result of the heat treatments and, in the case of the chromium nitrides, they act as a favorable site for the nucleation of σ-phase and χ-phase. - Highlights: • Microscopy was used on heat treated duplex steels for microstructure identification. • FESEM–BSE observation on unetched samples provided the best contrast between phases. • Analyses of carbides, nitrides, chi and sigma phases were possible by EDS and WDS. • Chromium nitrides act as favorable site for the nucleation of chi and sigma phases. • Secondary phases nucleation kinetics are faster in superduplex than in duplex steels.

36 MATERIALS SCIENCE↗