Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CEOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Reactivity of pulverized coals during combustion catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3}

Effects of CeO{sub 2} and Fe{sub 2}O{sub 3} on combustion reactivity of several fuels, including three ranks of coals, graphite and anthracite chars, were investigated using thermo-gravimetric analyzer. The results indicated that the combustion reactivity of all the samples except lignite was improved with CeO{sub 2} or Fe{sub 2}O{sub 3} addition. It was interesting to note that the ignition temperatures of anthracite were decreased by 50 C and 53 C, respectively, with CeO{sub 2} and Fe{sub 2}O{sub 3} addition and that its combustion rates were increased to 15.4%/min and 12.2%/min. Ignition temperatures of lignite with CeO{sub 2} and Fe{sub 2}O{sub 3} addition were 250 C and 226 C, and the combustion rates were 12.8% and 19.3%/min, respectively. When compared with those of lignite without catalysts, no obvious catalytic effects of the two catalysts on its combustion reactivity were revealed. The results from the combustion of the three rank pulverized coals catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} indicated significant effects of the two catalysts on fixed carbon combustion. And it was found that the higher the fuel rank, the better the catalytic effect. The results of combustion from two kinds of anthracite chars showed obvious effects of anthracite pyrolysis catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} on its combustion reactivity. (author)

01 COAL, LIGNITE, AND PEAT↗

Influence of CeO{sub 2} NPs on biological phosphorus removal and bacterial community shifts in a sequencing batch biofilm reactor with the differential effects of molecular oxygen

The effects of CeO{sub 2} nanoparticles (CeO{sub 2} NPs) on a sequencing batch biofilm reactor (SBBR) with established biological phosphorus (P) removal were investigated from the processes of anaerobic P release and aerobic P uptake. At low concentration (0.1 mg/L), no significant impact was observed on total phosphorus (TP) removal after operating for 8 h. However, at a concentration of 20 mg/L, TP removal efficiency decreased from 83.68% to 55.88% and 16.76% when the CeO{sub 2} NPs were added at the beginning of the anaerobic and aerobic periods, respectively. Further studies illustrated that the inhibition of the specific P release rate was caused by the reversible states of Ce{sup 3+} and Ce{sup 4+}, which inhibited the activity of exopolyphosphatase (PPX) and transformation of poly-β-hydoxyalkanoates (PHA) and glycogen, as well as the uptake of volatile fatty acids (VFAs). The decrease in the specific P uptake rate was mainly attributed to the significantly suppressed energy generation and decreased abundance of Burkholderia caused by excess reactive oxygen species. The removal of chemical oxygen demand (COD) was not influenced by CeO{sub 2} NPs under aerobic conditions, due to the increased abundance of Acetobacter and Acidocella after exposure. The inhibitory effects of CeO{sub 2} NPs with molecular oxygen were reduced after anaerobic exposure due to the enhanced particle size and the presence of Ce{sup 3+}. - Highlights: • CeO{sub 2} NPs (20 mg/L) had a notable toxicity effect on P removal in SBBR system. • The deteriorated SPRR was caused by the inhibited key enzyme activity (PPX). • The decreased SPUR was caused by the bacterial community shifts. • Ce ions converting and excess ROS generation are related toxicity mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Degradation of Congo Red dye by a Fe 2 O 3 @CeO 2 -ZrO 2 /Palygorskite composite catalyst: Synergetic effects of Fe 2 O 3

A newly designed Fe 2 O 3 @CeO 2 -ZrO 2 /Palygorskite heterogeneous Fenton catalyst with high degradation efficiency toward Congo Red (CR) is reported in this paper. The iron oxide (Fe 2 O 3 ) was used as the originator of hydroxyl radicals ( OH), CeO 2 -ZrO 2 was used as an efficient matrix of Fe 2 O 3 to enhance the oxidation performance, and the Palygorskite (Pal) played the role of substrate and adsorbent. A synergetic effect of the catalyst was realized by enhancing the adsorption capacity and dispersibility of CeO 2 -ZrO 2 and Fe 2 O 3 nanoparticles, and also due to charge transfer between these two species. The products were characterized by XRD, FTIR, SEM, TEM, XPS, VSM and nitrogen adsorption-desorption isotherms. The catalytic activities were evaluated in terms of many reaction parameters. The removal efficiency of CR was up to 95% on Fe 2 O 3 @CeO 2 -ZrO 2 /Pal under optimized conditions (Pal accounted for 30% of the catalyst mass fraction and Ce/Zr atoms molar ratio = 8:2, T = 30 °C, pH = 3.4, 4 g L -1 catalyst, 40 mM H 2 O 2 and 500 mg/L CR), the product also has shown good reusability. Both α-Fe 2 O 3 and CeO 2 -ZrO 2 played important roles in the generation of hydroxyl radicals, which determined the catalytic efficiency of the composite catalyst. Fe 2 O 3 @CeO 2 -ZrO 2 /Pal was proven to be a promising candidate in the field of heterogeneous Fenton catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of CeO{sub 2} crystals synthesized with different amino acids

We investigated the relationship between the structures of the CeO{sub 2} products (particle size, morphology and their characteristics) prepared using different amino acids. Cerium hydroxide carbonate precursors were initially prepared by a hydrothermal method and were subsequently converted to CeO{sub 2} by its thermal decomposition. Various amino acids were used as structure-directing agents in the presence of cerium nitrate and urea as precursors. The results indicate morphology selectivity using different amino acids; CeO{sub 2} structures, such as quasi-prism-sphere, straw-bundle, urchin-flower like and polyhedron prisms, indeed could be produced. Raman and photoluminescence studies indicate the presence of oxygen vacancies in the CeO{sub 2} samples. Photoluminescence spectra of CeO{sub 2} with L-Valine exhibit stronger emission compared with other amino acids utilized under this study, indicating the higher degree of defects in these particles. This study clearly indicates that the degree of defects varied in the presence of different amino acids. Improved precision to control the crystal morphology is important in various material applications and our study provides a novel method to achieve this specificity. - Highlights: • We used urea hydrolysis of process for synthesis of CeO{sub 2}. • Structures have been directed using various amino acids. • We obtained straw bundle-like, quasi prism-sphere, polyhedron prisms and urchin flower-like based on amino acids. • We have found that amino acids could achieve the specificity of different degrees of defects. • This could provide the “tailor-make” of cerium crystals.

36 MATERIALS SCIENCE↗

Magnetic properties and photoabsorption of the Mn-doped CeO{sub 2} nanorods

Mn-doped CeO{sub 2} nanorods have been prepared from CeO{sub 2} particles through a facile composite-hydroxide-mediated (CHM) approach. The analysis from X-ray photoelectron spectroscopy indicates that the manganese doped in CeO{sub 2} exists as Mn{sup 2+}. The magnetic measurement of the Mn-doped CeO{sub 2} nanorods exhibits an enhanced ferromagnetic property at room temperature with a remanence magnetization (Mr) of 1.36 x 10{sup -3} emu/g and coercivity (Hc) of 22 Oe. Comparative UV-visible spectra reveal the shift of the absorption peak of the CeO{sub 2} from ultraviolet region to visible light region after being doped with Mn. The room temperature ferromagnetic properties and light absorption of the Mn-doped CeO{sub 2} nanorods would have potential applications in photocatalysis and building of photovoltaic devices.

36 MATERIALS SCIENCE↗

Combustion synthesized CeO{sub 2} as an anodic material in dye sensitized solar cells

Highlights: • One-step combustion synthesis of CeO{sub 2}. • Application of synthesized material as an anodic material for DSSC. • DSSC using CeO{sub 2} displayed an efficiency of 1.84%. - Abstract: Cerium oxide (CeO{sub 2}) has received a considerable attention due to its capacity to absorb visible light, low cost, high stability and environmental friendly catalytic applications. Among the various techniques employed to synthesize CeO{sub 2}, solution combustion synthesis is a one-step, economic and effective process. In this work, we report application of combustion synthesized CeO{sub 2} as an anodic material in the dye sensitized solar cell (DSSC). The synthesized material were characterized using standard analytical techniques such as XRD, SEM, BET, UV-DRS, and TEM. DSSC was fabricated using the synthesized material and characterized for incident photon to current conversion efficiency (IPCE), current density-voltage (J-V) measurements and electrochemical impedance spectroscopy. The power conversion efficiency of solar cell was found to be 1.84%. This is the first study to report use of combustion synthesized CeO{sub 2} for DSSC application.

36 MATERIALS SCIENCE↗

H 2 Dissociation on Noble Metal Single Atom Catalysts Adsorbed on and Doped into CeO 2 (111)

In this study, we used density functional theory (DFT) calculations to investigate the dissociation of H 2 on an Ag single atom catalyst adsorbed on the pristine CeO 2 (111) surface (Ag/CeO 2 ), or substituting a surface Ce atom on the reduced (Ag:CeO 2-x ) and partially hydrogenated (Ag:H–CeO 2 ) surfaces. The initial state of the H 2 dissociation reaction in the different investigated models corresponds to distinct oxidation states, +1, +2, or +3, of the Ag atom, thus allowing us to examine the influence of the charge transfers between the noble metal, the oxide, and the hydrogen atoms on the reaction pathway and activation energy. In all investigated models, the computed barrier of H 2 dissociation is lowered by about 0.6 eV in comparison to that on metal-free CeO 2 . On Ag/CeO 2 and Ag:CeO 2-x , also the energy of H 2 dissociative adsorption is smaller than that on metal-free ceria. These results suggest that CeO 2 modified with dispersed Ag atoms is a promising anode material for proton exchange membrane fuel cells. Lastly, further comparison of our results for Ag to analogous calculations for Cu and Au single atom catalysts reveals trends in the computed barriers that can be related to the change of the metal oxidation state in the reaction.

36 MATERIALS SCIENCE↗

In Situ Elucidation of the Active State of Co–CeO x Catalysts in the Dry Reforming of Methane: The Important Role of the Reducible Oxide Support and Interactions with Cobalt

The activation of methane and its dry reforming with CO 2 was systematically studied over a series (2–30 wt %) of Co (~5 nm in size) loaded CeO 2 catalysts, with an effort to elucidate the interplay between Co and CeO 2 during the catalytic process using in situ methods. The results of in situ time-resolved X-ray diffraction (TR-XRD) show a strong interaction of methane with the CoOx–CeO 2 systems at temperatures between 200 and 350 °C. The hydrogen produced by the dissociation of C–H bonds in methane leads to a full reduction of Co oxide, Co 3 O 4 → CoO → Co, and a partial reduction of ceria with the formation of some Ce 3+ . Upon the addition of CO 2 , a catalytic cycle for dry reforming of methane (DRM) was achieved on the CoOx–CeO 2 powder catalysts at temperatures below 500 °C. A 10 wt % Co–CeO 2 catalyst was found to possess the best catalytic activity among various cobalt loading catalysts, and it exhibits a desirable stability for the DRM with a minimal effect of carbon accumulation. The phase transitions and the nature of active components in the catalyst were investigated under reaction conditions by in situ time-resolved XRD and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). These studies showed dynamic evolutions in the chemical composition of the catalysts under reaction conditions. CO 2 attenuated the reducing effects of methane. Under optimum CO- and H 2 -producing conditions, both XRD and AP-XPS indicated that the active phase involved a majority of metallic Co with a small amount of CoO, both supported on a partially reduced ceria (Ce 3+ /Ce 4+ ). Finally, we identified the importance of dispersing Co, anchoring it onto the ceria surface sites, and then utilizing the redox properties of CeO 2 for activating and then oxidatively converting methane while inhibiting coke formation. Furthermore, a synergistic effect between cobalt and ceria and likely the interfacial sitee are essential to successfully close the catalytic cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Conversion of Bamboo Sawdust over ZrO 2 –CeO 2 /γ-Al 2 O 3 to Produce Ketonic Hydrocarbon Precursors and Furans

Here, a series of metal oxides including ZrO 2 /γ-Al 2 O 3 , CeO 2 /γ-Al 2 O 3 , and ZrO 2 –CeO 2 /γ-Al 2 O 3 were synthesized and employed to conduct catalytic fast pyrolysis of bamboo sawdust via an analytical pyrolyzer/gas chromatograph/mass spectrometer (Py-GC/MS) to produce hydrocarbon precursors such as ketones and furans. Experimental results illustrated that the use of metal oxides enhanced the formation of ketones and monoaromatic hydrocarbons compared to catalyst-free trial. Among the metal oxides, ZrO 2 –CeO 2 /γ-Al 2 O 3 exhibited the most significant ketonization and aldol condensation activities yielding the highest concentration of linear and cyclic ketones. In addition, nonacidic oxygenates such as furfural, acetol, butanedial, 2,3-dihydrobenzofuran, and methyl acetate, were efficiently converted into hydrocarbon precursors over metal oxides. A dual catalytic bed system integrating ZrO 2 –CeO 2 /γ-Al 2 O 3 and HZSM-5 significantly facilitated the production of aromatic hydrocarbons compared to pure HZSM-5 catalytic run. The use of ZrO 2 –CeO 2 /γ-Al 2 O 3 mixed with HZSM-5 mode maximized the formation of xylenes, while ZrO 2 –CeO 2 /γ-Al 2 O 3 mixed with bamboo sawdust catalytic trial increased the concentration of benzene, toluene, and alkylbenzenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Reaction of Acetaldehyde over CeOx(111) Thin Films

This study reports the interaction of acetaldehyde with well-ordered CeO{sub X}(111) thin film surfaces. The fully oxidized CeO{sub 2}(111) surface shows a weak interaction with acetaldehyde with the sole desorption product (TPD) being the parent molecule at 210 K. The chemisorbed molecule binds to the surface as the {eta}{sub 1}-acetaldehyde species rather than through a bridge-bonded dioxy configuration. Acetaldehyde chemisorbs strongly on reduced CeO{sub 2-X}(111) with nonrecombinative and recombinative acetaldehyde desorbing at 405 and 550-600 K, respectively. Deoxygenation and dehydration also occur, producing ethylene and acetylene at 580 and 620 K, respectively. Acetaldehyde initially adsorbs in the {eta}{sub 1} configuration and then converts to a carbanion species with both C {double_bond} C and C {double_bond} O bond character above 300 K.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of surface defect states in CeO{sub 2-y} nanocrystals by Scanning−tunneling microscopy/spectroscopy and ellipsometry

Synthesis process strongly influences the nanocrystalline CeO{sub 2-y} defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO{sub 2-y} samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO{sub 2-y} samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO{sub 2-y} nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO{sub 2-y} nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F{sup +} and F{sup 0}) can be formed in the CeO{sub 2-y} nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth, sintering, and chemical states of Co supported on reducible CeO 2 (111) thin films: The effects of the metal coverage and the nature of the support

The growth, sintering, and interaction of cobalt with ceria were studied under ultrahigh vacuum conditions by vapor-deposition of Co onto well-defined CeOx(111) (1.5 < x < 2) thin films grown on Ru(0001). Charge transfer from Co to ceria occurs upon deposition of Co on CeO 1.96 and partially reduced CeO 1.83 at 300 K. X-ray photoelectron spectroscopy studies show that Co is oxidized to Co 2+ species at the cost of the reduction of Ce 4+ to Ce 3+ , at a lesser extent on reduced ceria. Co 2+ is the predominant species on CeO 1.96 at low Co coverages (e.g., ≤0.20 ML). The ratio of metallic Co/Co 2+ increases with the increase in the Co coverage. However, both metallic Co and Co 2+ species are present on CeO 1.83 even at low Co coverages with metallic Co as the major species. Scanning tunneling microscopy results demonstrate that Co tends to wet the CeO 1.96 surface at very low Co coverages at room temperature forming one-atomic layer high structures of Co–O–Ce. The increase in the Co coverage can cause the particle growth into three-dimensional structures. The formation of slightly flatter Co particles was observed on reduced CeO 1.83 . In comparison with other transition metals including Ni, Rh, Pt, and Au, our studies demonstrate that Co on ceria exhibits a smaller particle size and higher thermal stability, likely arising from strong metal–support interactions. The formed particles upon Co deposition at 300 K are present on the ceria surface after heating to 1000 K. The Co–ceria interface can be tuned by varying the Co metal coverage, the annealing temperature, and the nature of the ceria surface.

36 MATERIALS SCIENCE↗

Thermal and mechanical properties of CeO 2

In this study, the thermal and mechanical properties of cerium dioxide (CeO 2 ) were assessed using a range of experimental techniques. The oxygen potential of CeO 2 was measured by the thermogravimetric technique, and a numerical fit for the oxygen potential of CeO 2 is derived based on defect chemistry. Mechanical properties of CeO 2 were obtained using sound velocity measurement, resonant ultrasound spectroscopy and nanoindentation. The obtained mechanical properties of CeO 2 are then used to evaluate the Debye temperature and Grüneisen constant. The heat capacity and thermal conductivity of CeO 2 were also calculated using the Debye temperature and the Grüneisen constant. Lastly, the thermal conductivity was calculated based upon laser flash analysis measurements performed on pellets fabricated using a range of feedstock purities to resolve discrepancies in the existing literature.

36 MATERIALS SCIENCE↗

Construction of a Pt‐CeO x Interface for the Electrocatalytic Hydrogen Evolution Reaction

Abstract The creation of metal‐metal oxide interfaces is an important approach to fine‐tuning catalyst properties through strong interfacial interactions. This article presents the work on developing interfaces between Pt and CeO x that improve Pt surface energetics for the hydrogen evolution reaction (HER) within an alkaline electrolyte. The Pt‐CeO x interfaces are formed by depositing size‐controlled Pt nanoparticles onto a carbon support already coated with ultrathin CeO x nanosheets. This interface structure facilitates substantial electron transfer from Pt to CeO x , resulting in decreased hydrogen binding energies on Pt surfaces, and water dissociation for the HER, as predicted by the density functional theory (DFT) calculations. Electrochemical testing indicates that both Pt specific activity and mass activity are improved by a factor of 2 to 3 following the formation of Pt‐CeO x interfaces. This study underscores the significance and potential of harnessing robust interfacial effects to enhance electrocatalytic reactions.

25 ENERGY STORAGE↗

Effects of CeO{sub 2} on the Microstructure and Properties of Laser Cladding 316L Coating

Laser cladding was used to distribute a CeO{sub 2}-modified 316L powder coating onto a 316L stainless steel surface. The cladding layer phase composition was evaluated through x-ray diffraction. An analysis of the microstructure was conducted using an optical microscope and scanning electron microscope, while the micro-hardness was measured using a tester. The coating corrosion behavior in response to 3.5% NaCl solution was analyzed by polarization curves and electrochemical impedance spectroscopy. Finally, the overall performance of coatings with different CeO{sub 2} concentrations, 1, 2, and 3%, was compared. Results showed that adding CeO{sub 2} significantly refined the grains, reduced the coating porosity, and effectively limited the appearance of local corrosion. Also, additive CeO{sub 2} shifted the coating’s electrode potential in a positive direction, minimizing the current density of corrosion, creating a stable passivation film, and improving the coating’s corrosion resistance. The coating performance (hardness and corrosion behavior) was optimal when 2% CeO{sub 2} was employed as the powder mass.

36 MATERIALS SCIENCE↗

Constructing efficient CuO x -CeO 2 catalyst for NO reduction by CO: New insights into the structure–activity relationship

CuO-CeO 2 based materials have been recognized as promising substitutes for precious metal catalysts in emission control field due to their superior redox property and low cost. In this work, by optimizing the deposition process of CeO 2 and CuO onto γ-Al 2 O 3 , highly dispersed CuO clusters on unique CeO 2 -Al 2 O 3 support with small CeO 2 particles (7Cu-Ce/CeAl) were successfully constructed for efficient NO reduction by CO, which exhibited much higher NO removal efficiency and N 2 selectivity than CuO catalysts supported on γ-Al 2 O 3 (7Cu/Al) and conventional CeO 2 -Al 2 O 3 support (7Cu/CeAl). Moreover, H 2 O showed limited inhibition effect on the catalytic performance of 7Cu-Ce/CeAl catalyst. With the help of Raman spectra, X-ray absorption spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy, etc., it was clearly revealed that the abundant Cu + /Ce 3+ paired sites with surface synergetic oxygen vacancies (SSOV) on 7Cu-Ce/CeAl catalyst could effectively facilitate the adsorption and activation of CO and NO, thus significantly enhancing the NO removal efficiency.

36 MATERIALS SCIENCE↗

Controlled synthesis of nanocrystalline CeO{sub 2} and Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M=Zr, Y, Ti, Pr and Fe) solid solutions by the hydrothermal method: Structure and oxygen storage capacity

CeO{sub 2} and Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M=Zr, Ti, Pr, Y and Fe) nanocrystallites of 5-10 nm sizes have been synthesized by hydrothermal method using diethylenetriamine (DETA) and melamine as complexing agents. Compounds have been characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX) and their structures have been refined by the Rietveld method. All the compounds crystallize in cubic fluorite structure. Even up to 50% Zr and Y, 40% Ti, 25% Pr and 15% Fe is substituted for Ce{sup 4+} in CeO{sub 2} by this method. Sizes of crystallites can be tuned by changing the complexing agent and reaction temperature. Nanocrystalline CeO{sub 2} and Ce{sub 1-x}Zr{sub x}O{sub 2} prepared here have higher or at least competitive oxygen storage capacity (OSC) than those reported in literature. Ce{sub 1-x}Fe{sub x}O{sub 2-{delta}} shows higher OSC and higher percentage of CO oxidation at lower temperature than Ce{sub 1-x}Zr{sub x}O{sub 2}. - Graphical abstract: CeO{sub 2} and Ce{sub 1-x}M{sub x}O{sub 2-{delta}} (M=Zr, Ti, Pr, Y and Fe) nanocrystallites of 5-10 nm sizes have been synthesized by hydrothermal method using diethylenetriamine (DETA) and melamine as complexing agents. Ce{sub 1-x}Fe{sub x}O{sub 2-{delta}} shows higher OSC and higher percentage of CO oxidation at lower temperature than Ce{sub 1-x}Zr{sub x}O{sub 2}. CO conversion with lattice oxygen from (a) CeO{sub 2} (5 nm), (b) Ce{sub 0.75}Zr{sub 0.25}O{sub 2}, (c) Ce{sub 0.50}Zr{sub 0.50}O{sub 2} and (d) Ce{sub 0.85}Fe{sub 0.15}O{sub 1.85}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗