Results for “CAS Project” — Page 4

NASA NTRS2017

Control Demonstration of Multiple Doubly-Fed Induction Motors for Hybrid Electric Propulsion

The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application.The Convergent Aeronautics Solutions (CAS) High Voltage-Hybrid Electric Propulsion (HVHEP) task was formulated to support the move into future hybrid-electric aircraft. The goal of this project is to develop a new AC power architecture to support the needs of higher efficiency and lower emissions. This proposed architecture will adopt the use of the doubly-fed induction machine (DFIM) for propulsor drive motor application. DFIMs are attractive for several reasons, including but not limited to the ability to self-start, ability to operate sub- and super-synchronously, and requiring only fractionally rated power converters on a per-unit basis depending on the required range of operation. The focus of this paper is based specifically on the presentation and analysis of a novel strategy which allows for independent operation of each of the aforementioned doubly-fed induction motors. This strategy includes synchronization, soft-start, and closed loop speed control of each motor as a means of controlling output thrust; be it concurrently or differentially. The demonstration of this strategy has recently been proven out on a low power test bed using fractional horsepower machines. Simulation and hardware test results are presented in the paper.

CAS↗

NASA NTRS1983

Carbon lines at limitedly low frequencies

Detection of several absorption recombination radio lines of carbon at 26 MHz in Cas A direction resulted in an attempt to select similar situations (a gas cloud projection on the intense source of the nonthermal radio emission) that are promising for detecting lines of such a kind. Recommendations are given for observations to be made.

Valtts, I. Y.↗

NASA NTRSDate not supplied

Sensor-based Prognostics for Safe Batteries for Electric Aircraft

With a new start awarded under CAS for Fiscal Year 2020, the Sensor-based Prognostics to Avoid Runaway Reactions and Catastrophic Ignition project, or SPARRCI, aims to eliminate safety risks of lithium-ion and next-generation lithium-based batteries. SPARRCI is taking a deeper dive into the inner workings of battery cells by introducing miniature multifunctional sensors within the cells to detect early signs of failure. Combined with nondestructive evaluation techniques to gather complementary battery health data, battery data will be monitored in real-time via prognostics which will ultimately be able to identify when the cell is exhibiting abnormal behavior bordering on failure, with the ability to provide early warning such that the battery may be taken offline prior to catastrophic failure events.

Brianne Demattia↗

NASA NTRS1995

The NAS Computational Aerosciences Archive

In order to further the state-of-the-art in computational aerosciences (CAS) technology, researchers must be able to gather and understand existing work in the field. One aspect of this information gathering is studying published work available in scientific journals and conference proceedings. However, current scientific publications are very limited in the type and amount of information that they can disseminate. Information is typically restricted to text, a few images, and a bibliography list. Additional information that might be useful to the researcher, such as additional visual results, referenced papers, and datasets, are not available. New forms of electronic publication, such as the World Wide Web (WWW), limit publication size only by available disk space and data transmission bandwidth, both of which are improving rapidly. The Numerical Aerodynamic Simulation (NAS) Systems Division at NASA Ames Research Center is in the process of creating an archive of CAS information on the WWW. This archive will be based on the large amount of information produced by researchers associated with the NAS facility. The archive will contain technical summaries and reports of research performed on NAS supercomputers, visual results (images, animations, visualization system scripts), datasets, and any other supporting meta-information. This information will be available via the WWW through the NAS homepage, located at http://www.nas.nasa.gov/, fully indexed for searching. The main components of the archive are technical summaries and reports, visual results, and datasets. Technical summaries are gathered every year by researchers who have been allotted resources on NAS supercomputers. These summaries, together with supporting visual results and references, are browsable by interested researchers. Referenced papers made available by researchers can be accessed through hypertext links. Technical reports are in-depth accounts of tools and applications research projects performed by NAS staff members and collaborators. Visual results, which may be available in the form of images, animations, and/or visualization scripts, are generated by researchers with respect to a certain research project, depicting dataset features that were determined important by the investigating researcher. For example, script files for visualization systems (e.g. FAST, PLOT3D, AVS) are provided to create visualizations on the user's local workstation to elucidate the key points of the numerical study. Users can then interact with the data starting where the investigator left off. Datasets are intended to give researchers an opportunity to understand previous work, 'mine' solutions for new information (for example, have you ever read a paper thinking "I wonder what the helicity density looks like?"), compare new techniques with older results, collaborate with remote colleagues, and perform validation. Supporting meta-information associated with the research projects is also important to provide additional context for research projects. This may include information such as the software used in the simulation (e.g. grid generators, flow solvers, visualization). In addition to serving the CAS research community, the information archive will also be helpful to students, visualization system developers and researchers, and management. Students (of any age) can use the data to study fluid dynamics, compare results from different flow solvers, learn about meshing techniques, etc., leading to better informed individuals. For these users it is particularly important that visualization be integrated into dataset archives. Visualization researchers can use dataset archives to test algorithms and techniques, leading to better visualization systems, Management can use the data to figure what is really going on behind the viewgraphs. All users will benefit from fast, easy, and convenient access to CFD datasets. The CAS information archive hopes to serve as a useful resource to those interested in computational sciences. At present, only information that may be distributed internationally is made available via the archive. Studies are underway to determine security requirements and solutions to make additional information available. By providing access to the archive via the WWW, the process of information gathering can be more productive and fruitful due to ease of access and ability to manage many different types of information. As the archive grows, additional resources from outside NAS will be added, providing a dynamic source of research results.

Miceli, Kristina D.↗

NASA NTRS2024

Preface to the Special Issue on Modeling and Data Analysis Methods for the SMILE mission

The SMILE (Solar wind Magnetosphere Ionosphere Link Explorer) project (http://www.nssc.cas.cn/smile/, https://www.cosmos.esa.int/web/smile/mission) is a joint spacecraft mission of the European Space Agency (ESA) and the Chinese Academy of Sciences (CAS) with an expected launch in 2025. SMILE aims to study the global interactions of solar wind–magnetosphere–ionosphere innovatively by imaging the Earth’s magnetosheath and cusps in soft X-rays and the northern auroral region in ultraviolet (UV) while simultaneously measuring plasma and magnetic field parameters in the solar wind and magnetosheath along a highly-elliptical and highly-inclined orbit. This special issue is composed of 22 articles, presenting recent progress in modeling and data analysis techniques developed for the SMILE mission. In this preface, we categorize the articles into the following seven topics and provide brief summaries: (1) instrument descriptions of the Soft X-ray Imager (SXI), (2) numerical modeling of the X-ray signals, (3) data processing of the X-ray images, (4) boundary tracing methods from the simulated images, (5) physical phenomena and a mission concept related to the scientific goals of SMILE-SXI, (6) studies of the aurora, and (7) ground-based support for SMILE.

SMILE↗

NASA NTRSDate not supplied

Assessing Helicopter Pilots’ Detect and Avoid and Collision Avoidance Performance With ACAS Xr

The latest variant of the Federal Aviation Administration’s Airborne Collision Avoidance System (ACAS X) is being designed for both crewed and uncrewed rotorcraft. Referred to as ACAS Xr, the system joins a suite of other ACAS X variants poised to replace the Traffic Alert and Collision Avoidance System (TCAS II). ACAS Xr is tuned to support current-day helicopter platforms as well as electric Vertical Takeoff and Landing (eVTOL) vehicles that are still under development. Given this flexibility, ACAS Xr may be used by helicopter crews currently in operation or by remotely-operated eVTOL aircraft in the emerging Advanced Air Mobility (AAM) market. To cover the range of potential uses, two distinct configurations are being proposed for ACAS Xr: Collision Avoidance System (CAS) and Detect and Avoid (DAA). Under the CAS configuration, ACAS Xr provides minimal caution-level alerting but issues directive warning-level alerting and guidance. The DAA configuration, by contrast, provides caution-level alerting and guidance, in addition to the warning-level alerting and guidance. The current study was performed as part of the National Aeronautics and Space Administration’s AAM project. Six helicopter pilots were recruited to fly a variety of scripted traffic scenarios in a full-motion, crewed eVTOL simulator. Participants flew 60 encounters over two days, reacting to pre-recorded intruder aircraft that were scripted to fly into the participant’s aircraft from different approach angles, relative altitudes, and during different phases of flight. The pilots flew half of the encounters with the CAS configuration and half with the DAA configuration. Within each block of 30 encounters, pilots experienced 10 conflicts while in cruise, 10 in hover, and 10 while on approach to a heliport. Results showed that pilot response times were consistently under 5 seconds for RAs and under 10 seconds for DAA alerts, when present, during all three phases of flight. Unsurprisingly, the DAA configuration was associated with lower rates of en-route and high-severity losses of DAA well clear compared to the CAS configuration in all phases of flight except for the terminal area. Rates of losses of DAA well clear were found to be substantially higher in the Hover scenario, compared to Cruise. Pilots failed to fully comply with RAs at a rate of 0.10-0.18 in all conditions except for the DAA configuration in the Hover scenario, which was associated with a higher non-compliance rate of 0.4 due to Descend RAs issued at low altitudes. The implications of these results with regards to the ongoing development of ACAS Xr is discussed.

air taxis↗

NASA NTRSDate not supplied

Assessing Helicopter Pilots’ Detect and Avoid and Collision Avoidance Performance with ACAS Xr

The latest variant of the Federal Aviation Administration’s Airborne Collision Avoidance System (ACAS X) is being designed for both crewed and uncrewed rotorcraft. Referred to as ACAS Xr, the system joins a suite of other ACAS X variants poised to replace the Traffic Alert and Collision Avoidance System (TCAS II). ACAS Xr is tuned to support current-day helicopter platforms as well as electric Vertical Takeoff and Landing (eVTOL) vehicles that are still under development. Given this flexibility, ACAS Xr may be used by helicopter crews currently in operation or by remotely-operated eVTOL aircraft in the emerging Advanced Air Mobility (AAM) market. To cover the range of potential uses, two distinct configurations are being proposed for ACAS Xr: Collision Avoidance System (CAS) and Detect and Avoid (DAA). Under the CAS configuration, ACAS Xr provides minimal caution-level alerting but issues directive warning-level alerting and guidance. The DAA configuration, by contrast, provides caution-level alerting and guidance, in addition to the warning-level alerting and guidance. The current study was performed as part of the National Aeronautics and Space Administration’s AAM project. Six helicopter pilots were recruited to fly a variety of scripted traffic scenarios in a full-motion, crewed eVTOL simulator. Participants flew 60 encounters over two days, reacting to pre-recorded intruder aircraft that were scripted to fly into the participant’s aircraft from different approach angles, relative altitudes, and during different phases of flight. The pilots flew half of the encounters with the CAS configuration and half with the DAA configuration. Within each block of 30 encounters, pilots experienced 10 conflicts while in cruise, 10 in hover, and 10 while on approach to a heliport. Results showed that pilot response times were consistently under 5 seconds for RAs and under 10 seconds for DAA alerts, when present, during all three phases of flight. Unsurprisingly, the DAA configuration was associated with lower rates of en-route and high-severity losses of DAA well clear compared to the CAS configuration in all phases of flight except for the terminal area. Rates of losses of DAA well clear were found to be substantially higher in the Hover scenario, compared to Cruise. Pilots failed to fully comply with RAs at a rate of 0.10-0.18 in all conditions except for the DAA configuration in the Hover scenario, which was associated with a higher non-compliance rate of 0.4 due to Descend RAs issued at low altitudes. The implications of these results with regards to the ongoing development of ACAS Xr is discussed.

air taxis↗

NASA NTRS2003

Uncovering The Properties of Young Neutron Stars and Their Surrounding Supernova A Remnants

In the third year of this program, the following studies have been undertaken in support of this effort: G292.0+1.8: In our previous work on this SNR, we discovered a young neutron star and its associated pulsar wind nebula. Radio observations by Camilo et al. (2002) have identified a young 136 ms pulsar in the direction of G292.0+1.8. We have used Chandra HRC observations of the central source to identify X-ray pulsations at the same period, thus establishing the neutron star as the radio pulsar counterpart. We have also set limits on the cooling of this young neutron star based on the unpulsed component of the X-ray emission. We find that the limit falls slightly below standard cooling models in which the modified Urca process is responsible for the bulk of the interior neutrino emission. A paper summarizing these results is currently being circulated amongst co-authors for review prior to publication. 3c 58: Our Chandra observations of this Crab-like SNR revealed the presence of a young, rapidly rotating pulsar as well as a central compact nebula which we interpret as a toroidal structure associated with the pulsar wind termination shock. Our modeling of this structure has allowed us to establish a temperature upper limit for the neutron star which falls well below predictions from standard cooling models, and implies the presence of exotic particles (such as pion condensates) or other processes that increase the neutrino production rate in the interior. A paper summarizing this work has been published in the Astrophysical Journal (Slane, Helfand, & Murray 2002, ApJ, 571, L45), and the results were the subject of a NASA Space Science Update (4/10/2002) which led to extensive media coverage. Based upon our initial observations, we submitted a successful Chandra Large Project proposal for a 350 ks observation of this young neutron star and its wind nebula. Kes 79: Our Chandra observations of this SNR reveal a compact central source which appears to be the neutron star formed in the explosion that produced the remnant. There is no evidence for a surrounding pulsar wind nebula. The source properties are similar to the central source in Cas A even though the Kes 79 remnant is considerably older. The results have been published in the Astrophysical Journal (Seward, Slane, Smith, and Sun 2003, ApJ, 584,414). Chandra Survey for Compact Objects in Supernova Remnants: We have formed a collaboration to carry out an extensive search for young neutron stars in nearby supernova remnants. Using X-ray observations from an approved Chandra Large Project, as well as from additional approved XMM observations, we are investigating a volume-limited sample of SNRs for which there is currently no evidence of associated neutron stars. We have obtained extensive optical and 1R data to complement the project, and analysis of these data is currently underway.

Slane, Patrick O.↗

NASA NTRS2004

Cooperative Research in High Energy Astrophysics between JHU and GSFC

This grant was awarded to establish and support cooperative research programs between the Center of Astrophysical Sciences (CAS) at the Johns Hopkins University and the Laboratory for High Energy Astrophysics (LHEA) at the NASA/Goddard Space Flight Center (GSFC). The goals o f the program are to facilitate, encourage and initiate: (1) sharing of resources, knowledge and expertise in the general astrophysics, and relevant databases; (2) new collaborations and projects between the two institutions and its scientists, (3) training and mentoring of JHU students and junior researchers by way of connecting them with appropriate researchers and experts at the LHEA.

Vishniac, Ethan↗

NASA NTRS1984

Enhanced TCAS 2/CDTI traffic Sensor digital simulation model and program description

Digital simulation models of enhanced TCAS 2/CDTI traffic sensors are developed, based on actual or projected operational and performance characteristics. Two enhanced Traffic (or Threat) Alert and Collision Avoidance Systems are considered. A digital simulation program is developed in FORTRAN. The program contains an executive with a semireal time batch processing capability. The simulation program can be interfaced with other modules with a minimum requirement. Both the traffic sensor and CAS logic modules are validated by means of extensive simulation runs. Selected validation cases are discussed in detail, and capabilities and limitations of the actual and simulated systems are noted. The TCAS systems are not specifically intended for Cockpit Display of Traffic Information (CDTI) applications. These systems are sufficiently general to allow implementation of CDTI functions within the real systems' constraints.

Goka, T.↗

NASA NTRS2016

The Distribution of Radioactive Ti-44 in Cassiopeia A

The distribution of elements produced in the innermost layers of a supernova explosion is a key diagnostic for studying the collapse of massive stars. Here we present the results of a 2.4 Ms NuSTAR observing campaign aimed at studying the supernova remnant Cassiopeia A (Cas A). We perform spatially resolved spectroscopic analysis of the Ti-44 ejecta, which we use to determine the Doppler shift and thus the three-dimensional (3D) velocities of the Ti-44 ejecta. We find an initial Ti-44 mass of (1.54 +/- 0.21) x 10(exp. -4) Solar Mass, which has a present-day average momentum direction of 340 degrees +/- 15 degrees projected onto the plane of the sky (measured clockwise from celestial North) and is tilted by 58 degrees +/- 20 degrees into the plane of the sky away from the observer, roughly opposite to the inferred direction of motion of the central compact object. We find some Ti-44 ejecta that are clearly interior to the reverse shock and some that are clearly exterior to it. Where we observe Ti-44 ejecta exterior to the reverse shock we also see shock-heated iron; however, there are regions where we see iron but do not observe Ti-44. This suggests that the local conditions of the supernova shock during explosive nucleosynthesis varied enough to suppress the production of Ti-44 by at least a factor of two in some regions, even in regions that are assumed to be the result of processes like Alpha-rich freezeout that should produce both iron and titanium.

rays: general â€“ ISM: supernova remnants â€“ nucl↗

NASA NTRS2017

MIDAS-FAST: Design and Validation of a Model-Based Tool to Predict Operator Performance with Robotic Arm Automation

The Coalition for Aerospace and Science (CAS) is hosting an exhibition on Capitol Hill on June 14, 2017, to highlight the contributions of CAS members to NASAs portfolio of activities. This exhibition represents an opportunity for an HFES members ground breaking work to be displayed and to build on support within Congress for NASAs human research program including in those areas that are of specific interest to the HFE community. The intent of this poster presentation is to demonstrate the positive outcome that comes from funding HFE related research on a project like the one exemplified by MIDAS-FAST.

MIDAS↗

NASA NTRS1994

High speed civil transport aerodynamic optimization

This is a report of work in support of the Computational Aerosciences (CAS) element of the Federal HPCC program. Specifically, CFD and aerodynamic optimization are being performed on parallel computers. The long-range goal of this work is to facilitate teraflops-rate multidisciplinary optimization of aerospace vehicles. This year's work is targeted for application to the High Speed Civil Transport (HSCT), one of four CAS grand challenges identified in the HPCC FY 1995 Blue Book. This vehicle is to be a passenger aircraft, with the promise of cutting overseas flight time by more than half. To meet fuel economy, operational costs, environmental impact, noise production, and range requirements, improved design tools are required, and these tools must eventually integrate optimization, external aerodynamics, propulsion, structures, heat transfer, controls, and perhaps other disciplines. The fundamental goal of this project is to contribute to improved design tools for U.S. industry, and thus to the nation's economic competitiveness.

Ryan, James S.↗

NASA NTRS2016

Lighter-Than-Air (LTA) "AirStation": Unmanned Aircraft System (UAS) Carrier Concept

Proposals for adapting modern airship technologies for military missions have mostly focused on exploiting the airships high flight endurance and low fuel requirement to conduct direct surveillance missions requiring high degrees of persistence over the areas to be observed. While this mission has value, it constrains the airship in two regards. (1) It places all the surveillance sensors, communication systems, and other mission equipment in the airship itself. (2) It requires the airship to be physically in the vicinity of the areas to be directly observed. A more advanced utilization of airship technology would be to add the capability to deploy a separate set of surveillance equipment, thereby enabling indirect and distributed observation operations. This can be undertaken by installing surveillance equipment in a squadron of unmanned aircraft systems (UAS) that can be carried and operated remotely from the airship, and then return to the airship as a base of support. This could be accomplished by deploying 20-30 UASs on an optionally manned (5 person crew) airship. The mission focus of the airship UAS carrier would be for support of distributed intelligence, surveillance and reconnaissance (ISR), close air support (CAS), maritime patrol and interdiction, electronic warfare (EW), persistent area dominance and missile defense. The logic for utilizing an airship carrier over a ground base to deploy UAS will be examined. Whether to be used as a stand-alone platform or in concert with conventional intelligence gathering techniques, the airship UAS carrier can provide the following benefits: a mobile base that will remain accessible despite political fallout which may render a ground base unavailable for use, the psychological impact of a power projection tool that has no geographical limits (imagined in the same way a naval carrier group projects power), cost-saving intelligence gathering over manned alternatives (assumption), and a wider area of influence when compared to an immobile ground base that must facilitate the transfer of UAS to other bases in order to overfly particular areas (all operations, launch, recover, etc. take place from the airship).

Hochstetler, Ron↗

NASA NTRSDate not supplied

Integration of Automated Systems (IAS) Flight Test - Hazard Perception & Avoidance (HPA) Results

The Integration of Automated Systems (IAS) flight test series concluded in October 2023 in support of NASA's Advanced Air Mobility (AAM) project. These flights include crewed, test (i.e., ownship) and traffic (i.e., intruder) aircraft that flew with unique technologies onboard. The presentation includes overviews of the flight tet itself and the specific results that pertain to the Hazard Perception and Avoidance (HPA) technical areas. HPA tested the FAA's Airborne Collision Avoidance System X (ACAS X), a next-generation collision avoidance tool developed to support different aircraft types and operations. The rotorcraft variant, ACAS Xr, is designed to accommodate existing helicopter platforms and in-development, vertical takeoff and landing (VTOL) concepts, which are critical to the emerging AAM concept of operations. Two configurations of ACAS Xr were examined: Collision Avoidance System (CAS, similar to the Traffic Collision Avoidance System [TCAS] II) and Detect and Avoid (DAA, previously developed to provide added situational awareness for remote pilots). Additionally, this system was flown in cruise and low-speed flight regimes as well as within en-route and (emulated), structured (i.e., dense/urban), and terminal airspaces. Results include the types of alerts generated by ACAS Xr across the different configurations, the distances at which the alerts were generated, response times, manuever sizes, miss distances, and general comments from pilots. Key takeaways and next steps are also provided.

detect and avoid↗

NASA NTRSDate not supplied

Detect and Avoid and Collision Avoidance Flight Test Results with ACAS Xr

In October 2023, the National Aeronautics and Space Administration (NASA) completed its Integration of Automated Systems flight test series, conducted under NASA’s Advanced Air Mobility project and in partnership with Sikorsky and the Defense Advanced Research Projects Agency (DARPA). The flight test effort included two crewed rotorcraft platforms. The first, a modified S-76B helicopter, served as the “ownship” for the duration of the flight test. The second vehicle, a modified S-70, served as the intruder aircraft. One Sikorsky pilot and one NASA test pilot was onboard each aircraft for every test point, with the NASA test pilot responsible for interacting with the research systems under test. Approximately half of the flight test was devoted to assessing the Federal Aviation Administration’s (FAA) next-generation collision avoidance system, the Airborne Collision Avoidance System X for Rotorcraft (ACAS Xr). The two configurations available within ACAS Xr – the Collision Avoidance System (CAS) configuration and the Detect and Avoid (DAA) configuration – were flown with an onboard pilot under Visual Flight Rules in controlled airspace over the Long Island Sound (Connecticut, USA). A total of 33 flight test cards were flown with ACAS Xr active. The ownship was equipped with ACAS Xr and the intruder was equipped with Automatic Dependent Surveillance-Broadcast (ADS-B). The test points were blocked by ACAS Xr configuration, with individual encounters varying the ownship speed (90 knots or 20 knots), the intruder designation (en-route, terminal area, or structured airspace), and method of RA execution (automated or manually executed). Results showed that the ACAS Xr alerting and guidance was largely effective and rated positively by the NASA test pilots, exemplified by zero instances of the pilots overriding an ACAS Xr Resolution Advisory (RA). Key areas of improvement, however, were noted, particularly with regards to the lack of an aural alert indicating a need to accelerate when receiving an RA at low speed and the occurrence of multiple RAs that the pilots found to be unacceptable.

detect and avoid↗

NASA NTRSDate not supplied

Detect and Avoid and Collision Avoidance Flight Test Results with ACAS Xr

In October 2023, the National Aeronautics and Space Administration (NASA) completed its Integration of Automated Systems flight test series, conducted under NASA’s Advanced Air Mobility project and in partnership with Sikorsky and the Defense Advanced Research Projects Agency (DARPA). The flight test effort included two crewed rotorcraft platforms. The first, a modified S-76B helicopter, served as the “ownship” for the duration of the flight test. The second vehicle, a modified S-70, served as the intruder aircraft. One Sikorsky pilot and one NASA test pilot was onboard each aircraft for every test point, with the NASA test pilot responsible for interacting with the research systems under test. Approximately half of the flight test was devoted to assessing the Federal Aviation Administration’s (FAA) next-generation collision avoidance system, the Airborne Collision Avoidance System X for Rotorcraft (ACAS Xr). The two configurations available within ACAS Xr – the Collision Avoidance System (CAS) configuration and the Detect and Avoid (DAA) configuration – were flown with an onboard pilot under Visual Flight Rules in controlled airspace over the Long Island Sound (Connecticut, USA). A total of 33 flight test cards were flown with ACAS Xr active. The ownship was equipped with ACAS Xr and the intruder was equipped with Automatic Dependent Surveillance-Broadcast (ADS-B). The test points were blocked by ACAS Xr configuration, with individual encounters varying the ownship speed (90 knots or 20 knots), the intruder designation (en-route, terminal area, or structured airspace), and method of RA execution (automated or manually executed). Results showed that the ACAS Xr alerting and guidance was largely effective and rated positively by the NASA test pilots, exemplified by zero instances of the pilots overriding an ACAS Xr Resolution Advisory (RA). Key areas of improvement, however, were noted, particularly with regards to the lack of an aural alert indicating a need to accelerate when receiving an RA at low speed and the occurrence of multiple RAs that the pilots found to be unacceptable.

detect and avoid↗

NASA NTRSDate not supplied

FT-01: Autonomous Helicopter Flight Testing Over Long Island Sound Special Session - Hazard Perception and Avoidance Tech Area

This presentation is included as part of a panel reporting on the Integration of Automated Systems (IAS) flight test series. The IAS series concluded in October 2023 and was conducted under NASA’s Advanced Air Mobility project and in partnership with Sikorsky and the Defense Advanced Research Projects Agency (DARPA). The flight test effort included two crewed rotorcraft platforms. The first, a modified S-76B helicopter, served as the “ownship” for the duration of the flight test. The second vehicle, a modified S-70, served as the intruder aircraft. One Sikorsky pilot and one NASA test pilot was onboard each aircraft for every test point, with the NASA test pilot responsible for interacting with the research systems under test. This portion of the panel presentation focuses on the results of the flight test that assessed the Federal Aviation Administration’s (FAA) next-generation collision avoidance system, the Airborne Collision Avoidance System X for Rotorcraft (ACAS Xr). The two configurations available within ACAS Xr – the Collision Avoidance System (CAS) configuration and the Detect and Avoid (DAA) configuration – were flown with an onboard pilot under Visual Flight Rules in controlled airspace over the Long Island Sound (Connecticut, USA). A total of 33 flight test cards were flown with ACAS Xr active. Results showed that the ACAS Xr alerting and guidance was largely effective and rated positively by the NASA test pilots, exemplified by zero instances of the pilots overriding an ACAS Xr Resolution Advisory (RA). Key areas of improvement, however, were noted, particularly with regards to the lack of an aural alert indicating a need to accelerate when receiving an RA at low speed and the occurrence of multiple RAs that the pilots found to be unacceptable.

detect and avoid↗