Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bi”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Formation kinetics and thermodynamic stability of the Aurivillius compounds in Bi 4 Ti 3 O 12 –BiFeO 3 system

Abstract The Aurivillius compounds in the Bi 2 O 3 –Fe 2 O 3 –TiO 2 system, combining ferroelectric, semiconducting, and ferromagnetic properties, have attracted particular interest. Formation kinetics and thermodynamic stability are the fundamental knowledge needed for modeling and predicting the temporal microstructure and property evolution during materials processing but have not yet been addressed by quantitative experimental measurement. This article focuses on the Bi n +1 Fe n –3 Ti 3 O 3 n +3 Aurivillius compounds on the Bi 4 Ti 3 O 12 –BiFeO 3 tie‐line to elucidate the mechanisms and thermodynamic controls responsible for phase formation of compounds with various perovskite‐like layers. Five high‐purity Aurivillius compounds Bi 4 Ti 3 O 12 , Bi 5 FeTi 3 O 15 , Bi 6 Fe 2 Ti 3 O 18 , Bi 7 Fe 3 Ti 3 O 21 , and Bi 8 Fe 4 Ti 3 O 24 with integer n = 3–7 values were synthesized and their phase transformation properties and enthalpies of formation were studied by X‐ray diffraction in situ, high temperature differential scanning calorimetry, and high temperature oxide melt solution calorimetry. Thermodynamic stability of the compounds decreases with increasing n , and formation kinetics gradually slow down, demonstrating the inherent difficulty to synthesize pure Aurivillius compounds with n larger than 8. This difficulty was confirmed by an impurity phase coexisting with Bi 9 Fe 5 Ti 3 O 27 .

Gong, Weiping↗
DOE OSTI2021

Thermodynamic properties of the Nd-Bi system via emf measurements, $\mathrm{DFT}$ calculations, machine learning, and $\mathrm{CALPHAD}$ modeling

Thermodynamic properties of the Nd-Bi system were investigated using a combination of experimental measurements, first-principles calculations based on density functional theory (DFT), data mining and machine learning (DM + ML) predictions, and calculation of phase diagrams (CALPHAD) modeling. The electromotive force (emf) of Nd-Bi alloys in molten LiCl-KCl-NdCl 3 at 773–973 K was measured via coulometric titration of Nd into Bi for the determination of thermochemical properties such as activity coefficients and solubilities of Nd in Bi. A new peritectic reaction of [liquid + NdBi 2 = Nd 3 Bi 7 ] at 774 K was confirmed using differential scanning calorimetry, structural (X-ray diffraction), and microstructural (scanning electron microscopy) analyses. The unknown crystal structure of NdBi2 was suggested to be a mixture of the anti-La 2 Sb configuration and the La 2 Te-type configuration based on ML predictions for over 26,000 data-mined AB 2 -type configurations together with DFT-based verifications. Using the newly acquired experimental data and DFT-based calculations, the thermodynamic description of the Nd-Bi system was remodeled, and a more complete Nd-Bi phase diagram was calculated, including the Nd 3 Bi 7 compound, invariant transition reactions, and liquidus temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Critical Current Distributions of Recent Bi-2212 Round Wires

Bi 2 Sr 2 CaCu 2 O 8+x (Bi-2212) is the only high-field, high-temperature superconductor (HTS) capable of reaching a critical current density J c (16 T, 4.2 K) of 6500 A·mm –2 in the highly desirable round wire (RW) form. However, state-of-the-art Bi-2212 conductors still have a critical current density (J c ) to depairing current density (J d ) ratio around 20 to 30 times lower than that of state-of-the-art Nb–Ti or REBCO. Previously, we have shown that recent improvements in Bi-2212 RW J c are due to improved connectivity associated with optimization of the heat treatment process, and most recently due to a transition to a finer and more uniform powder manufactured by Engi-Mat. One quantitative measure of connectivity may be the critical current (I c ) distribution, since the local I c in a wire can vary along the length due to variable vortex-microstructure interactions and to factors such as filament shape variations, grain-to-grain connectivity variations and blocking secondary phase distributions. Modeling the experimental V-I transition measured on a low resistance shunt as a complex sum of voltage contributions of individual filament and wire sub-sections allows a numerical extraction of the I c distribution from the d 2 V/dI 2 treatment of the V-I curves. Here we compare ~0.1 m length I c distributions of Bi-2212 RWs with recent state-of-the-art very high-J c Engi-Mat powder and lower J c and older Nexans granulate powder. We do find that the I c spread for Bi-2212 wires is about twice the relative standard of high-J c Nb–Ti well below H irr . We do not yet see any obvious contribution of the Bi-2212 anisotropy to the I c distribution and are rather encouraged that these Bi-2212 round wires show relative I c distributions not too far from high-J c Nb–Ti wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Quasi-One-Dimensional Structure and Possible Helical Antiferromagnetism of RbMn 6 Bi 5

Quasi-one-dimensional materials exhibit not only unique crystal structure but also abundant physical properties such as charge density wave, Luttinger liquid, and superconductivity. In this study, we report the discovery, structure, and physical properties of a new manganese-based quasi-one-dimensional material RbMn 6 Bi 5 , which crystallizes in a monoclinic space group C 2/ m (No. 12) with lattice parameters a = 23.286(5) Å, b = 4.6215(9) Å, c = 13.631(3) Å, and β = 125.00(3)°. The structure features [Mn 6 Bi 5 ] –1 double-walled column extending along the [010] direction, together with Bi–Bi homoatomic bonds linking the columns and the countercation Rb + . The temperature-dependent resistivity clearly indicates a significant resistivity anisotropy for RbMn 6 Bi 5 , whereas the magnetic susceptibility and specific heat measurements show that RbMn 6 Bi 5 is antiferromagnetic below 82 K. The density functional theory calculations indicate that RbMn 6 Bi 5 is a quasi-one-dimensional metal with possible helical antiferromagnetic configuration. The discovery of RbMn 6 Bi 5 confirms the viability of discovering new quasi-one-dimensional materials in manganese-based compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Additive-assisted synthesis and optoelectronic properties of (CH 3 NH 3 ) 4 Bi 6 I 22

Hybrid organic-inorganic halides containing Bi and Sb generally exhibit higher stability and lower toxicity compared to Pb analogues. Here, in this work, synthesis, crystal and electronic structures and optical properties of a brand-new methylammonium bismuth iodide, (MA) 4 Bi 6 I 22 (MA + = CH 3 NH 3 + ), are reported. Interestingly, we find that the presence of the HgI2 is necessary for the targeted preparation of (MA) 4 Bi 6 I 22 . (MA) 4 Bi 6 I 22 contains isolated [Bi 6 I 22 ] 4- clusters made of six edge-sharing octahedral BiI6 units, which are separated by MA + cations in its 0D crystal structure. A relatively low optical band gap of 1.9 eV was estimated for (MA) 4 Bi 6 I 22 based on diffuse reflectance measurements. An intense photoluminescence peak emerges at 636 nm at low temperatures that supports the assigned band gap value. Electronic structure calculations show the presence of flat bands in the valence and conduction bands, consistent with the low-dimensional structure of (MA) 4 Bi 6 I 22 , and slightly indirect nature of the bandgap. Our findings suggest that the use of facilitator moieties such as HgI 2 may provide a pathway to obtaining alternative methylammonium bismuth iodides to (MA) 3 Bi 2 I 9 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ordering in GaAs co-doped with Bi and N

Introducing only a few atomic percent of Bi or N in GaAs has a large effect on the band gap of the material. Specifically Bi doped GaAs shows potential for local band gap engineering in optoelectronic applications. The incorporation of Bi and N into GaAs is difficult due to strain effects. In this work we study the ordering of these dopants at the atomic scale in order to get a better understanding of the behavior of these dopants in the host lattice. Cross-sectional scanning tunneling microscopy is used to find the exact position of Bi and N dopants in the GaAs matrix, allowing us to study both their nearest neighbor pair occurrences and pair correlation functions. An attractive interaction between Bi dopants at short ranges (1-2 nm) is found and a similar effect is observed between N dopants. Here, we find a repulsive interaction with a similar length scale between Bi and N dopants. A similar repulsion is found in the Bi-N nearest neighbor pairs. Density functional theory is used to calculate the different nearest neighbor pair energies and test these results to the experimental pair occurrences. It is concluded from the experimental and theoretical results that the growth conditions and N inclusion greatly affects the Bi distribution in GaAs.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Ternary and quaternary oxides of Bi, Sr, and Cu

Before the discovery of superconductivity in an oxide of Bi, Sr, and Cu, the system Bi-Sr-Cu-O had not been studied, although several solid phases had been identified in the two-component regions of the ternary system Bi2O3-SrO-CuO. The oxides Sr2CuO3, SrCu2O2, SrCuO2, and Bi2CuO4 were then well known and characterized, and the phase diagram of the binary system Bi2O3 -SrO had been established in the temperature range 620 to 1000 C. Besides nine solutions of compositions Bi(2-2x) Sr(x) O(3-2x) and different symmetries, this diagram includes three definite compounds of stoichiometries Bi(2)SrO4, Bi2Sr2O5, and Bi2Sr3O6 (x = 0.50, 0.67 and 0.75 respectively), only the second of which with known unit-cell of orthorhombic symmetry, dimensions (A) a = 14.293(2), b = 7.651(2), c = 6.172(1), and z = 4. The first superconducting oxide in the system Bi-Sr-Cu-O was initially formulated as Bi2Sr2Cu2O(7+x), with an orthorhombic unit-cell of parameters (A) a = 5.32, b = 26.6, c = 48.8. In a preliminary study the same oxide was formulated with half the copper content, Bi(2)Sr(2)CuO(6+x), and indexed its reflections assuming an orthorhombic unit-cell of dimensions (A) a = 5.390(2), b = 26.973(8), c = 24.69(4). Subsequent studies by diffraction techniques have confirmed the composition 2:2:1. A new family of oxygen-deficient perovskites, was characterized, after identifying by x ray diffraction the phases present in the products of thermal treatments of about 150 mixtures of analytical grade Bi2O3, Sr(OH)2-8H2O and CuO at different molar ratios. X ray diffraction data are presented for some other oxides of Bi and Sr, as well as for various quaternary oxides, among them an oxide of Bi, Sr, and Cu.

Casais, M. T.↗
NASA NTRS1991

Ternary and quaternary oxides of Bi, Sr and Cu

Before the discovery of superconductivity in an oxide of Bi, Sr, and Cu, the system Bi-Sr-Cu-O had not been studied, although several solid phases had been identified in the two-component regions of the ternary system Bi2O3-Si-O-CuO. The oxides Sr2CuO3, SrCu2O2, SrCuO2, and Bi2CuO4 were then well known and characterized, and the phase diagram of the binary system Bi2O3-SrO had been established in the temperature range 620 to 1000 C. Besides nine solutions of compositions Bi(2-2x) Sr(x) O(3-2x) and different symmetries, this diagram includes three definite compounds of stoichiometries Bi(2)BrO4. Bi2Sr2O5, and Bi2Sr3O6 (x - 0.50, 0.67 and 0.75 respectively), only the second of which with known unit-cell of orthorhombic symmetry, dimensions (A) a = 14.293(2), b = 7.651(2), c = 6.172(1), and z = 4. The first superconducting oxide in the system Bi-Sr-Cu-O was initially formulated as Bi2Sr2Cu2O(7+x), with an orthorhombic unit-cell of parameters (A) a = 5.32, b = 26.6, c = 48.8. In a preliminary study the same oxide was formulated with half the copper content, Bi(2)Sr(2)CuO(6+x), and index its reflections assuming an orthorhombic unit-cell of dimensions (A) a = 5.390(2), b = 26.973(8), c = 24.69(4). Subsequent studies by diffraction techniques have confirmed the composition 2:2:1. A new family of oxygen-deficient perovskites, was characterized, after identifying by x ray diffraction the phases present in the products of thermal treatments of about 150 mixtures of analytical grade Bi2O3, Sr(OH)2-8H2O and CuO at different molar ratios. X ray diffraction data are presented for some other oxides of Bi and Sr, as well as for various quaternary oxides, among them an oxide of Bi, Sr, and Cu.

Casais, M. T.↗
NASA NTRS2020

Ag isotopic and chalcophile element evolution of the terrestrial and martian mantles during accretion: new constraints from Bi, Pd, and Ag metal-silicate partitioning.

The Earth’s timing of accretion and acquisition of moderately volatile compounds is uncertain. Hafnium-W and Mn-Cr isotopic data can bracket the timing of early planetary differentiation and core formation. The Ag-Pd system has also been utilized but its application has been limited by a lack of high pressure and temperature metal-silicate partitioning for Pd and Ag. Be-cause Ag (and Bi) are volatile chalcophile siderophile elements, understanding their early distribution can constrain the origin of volatile elements in differentiated bodies and planets. Unfortunately, neither Ag or Bi have been studied across the wide range of pressure and temperature conditions that are relevant to accretion and core-mantle differentiation. Here, new high-pressure and temperature multi-anvil metal-silicate equilibrium experiments for Bi and Ag have been carried out at conditions relevant to planetary accretion and metal silicate differentiation that allow a more refined and complete understanding of element partitioning during core formation. The new metal-silicate partitioning data utilized to predict the distributions of Bi, Pd, and Ag at conditions of accretion for Earth and Mars and show that the Pd/Ag ratio is significantly fractionated during accretion, allowing for the production of detectable 107Ag anomalies produced while 107Pd (half life = 6.5 M.y.) was still extant. Application of the new partitioning results to Earth shows that D(Bi) and D(Ag) (D = metal/silicate concentration ratio) are lowered due to the effect of pressure and Si alloyed in the metallic liquid, resulting in higher predicted mantle Bi and Ag abundances than in the bulk silicate Earth (BSE), as well as high and variable Pd/Ag. The unradiogenic Ag isotopic composition of the BSE could have been generated by early accretion of volatile-poor (high Pd/Ag) precursors, followed by later accretion of volatile–rich (low Pd/Ag) material, in agreement with earlier studies of Pd-Ag and Mn-Cr (Schönbächler et al., 2010). However, these main accretion phases would have to be followed by segregation of a sulfide liquid (at least 1.5% of magma ocean) at high pressures (>30 GPa), to explain the PUM Bi, Pd, and Ag, as well as Au, Pt, Cu and Ni concentrations as proposed previously. If the early accreted bulk Earth was volatile depleted with high Pd/Ag ratios, portions of the mantle may contain ancient domains that developed positive 107Ag isotopic anomalies (as also argued by noble gases, Nd, W, and Os isotopes). In comparison, Bi, Pd, and Ag concentrations in the martian mantle could have been set by simple metal-silicate equilibrium. Mars accreted and differentiated relatively rapidly, while also developing a deep magma ocean with a high Pd/Ag ratio that could have evolved positive 107Ag anomalies, in contrast to Earth. Measurements on shergottites may reveal these predicted Ag isotopic anomalies.

accretion↗
DOE OSTI2022

Combinatorial sputter deposition of ultrathick Au-Bi alloy films

We report gold-bismuth alloys are of interest as catalysts and catalytic sensing systems, electrochemical sensors, superconductors, and hohlraums for magnetically assisted inertial confinement fusion implosions. Radiation-hydrodynamics simulations with the Lasnex code of laser-driven hohlraums predict higher x-ray drive from Au-Bi alloys compared with cases of Au-Ta or pure Au and Bi hohlraums. Here, we use direct current magnetron sputtering in Ar gas, with co-sputtering from two elemental targets, to deposit Au-Bi alloys with Bi content of 9–77 at.% and thicknesses up to ~20 µm. Films are characterized by a combination of x-ray diffraction, Rutherford backscattering, scanning electron microscopy, substrate-curvature-based residual stress, and electronic transport measurements. Experiments are complemented by Monte Carlo simulations of ballistic sputtering and gas phase transport of depositing species and Ar gas atoms. Results show that all films are polycrystalline, with three distinct compositional regimes dominated by Au, Au 2 Bi, and Bi crystallographic phases. A metallic behavior of the temperature dependence of electrical resistivity is observed for all the films. Films with Bi content above ~30 at.% exhibit porosity, which is tolerable to hohlraum x-ray drive based on Lasnex simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cs 3 Bi 2 I 9 -hydroxyapatite composite waste forms for cesium and iodine immobilization

Perovskite-based ceramic composites were developed as potential waste form materials for immobilizing cesium (Cs) and iodine (I) with high waste loadings and chemical durability. The perovskite Cs 3 Bi 2 I 9 has high Cs (22 wt%) and I (58 wt%) content, and thus can be used as a potential host phase to immobilize these critical radionuclides. In this work, the perovskite Cs 3 Bi 2 I 9 phase was synthesized by a cost effective solution-based approach, and was embedded into a highly durable hydroxyapatite matrix by spark plasma sintering to form dense ceramic composite waste forms. The chemical durabilities of the monolithic Cs 3 Bi 2 I 9 and Cs 3 Bi 2 I 9 -hydroxyapatite composite pellets were investigated by static and semi-dynamic leaching tests, respectively. Cs and I are incongruently released from the matrix for both pure Cs 3 Bi 2 I 9 and composite structures. The normalized Cs release rate is faster than that of I, which can be explained by the difference in the strengths between Cs-I and Bi-I bonds as well as the formation of insoluble micrometer-sized BiOI precipitates. The activation energies of elemental releases based on dissolution and diffusion-controlled mechanisms are determined with significantly higher energy barriers for dissolution from the composite versus that of the monolithic Cs 3 Bi 2 I 9 . The ceramic-based composite waste forms exhibit excellent chemical durabilities and waste loadings, commensurate with the state-of-the-art glass-bonded perovskite composites for I and Cs immobilization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Surface Conversion of Single-Crystal Bi 2 Se 3 to β-In 2 Se 3

In this work, we demonstrate that the surface layers of single-crystal layered-2D Bi 2 Se 3 can be converted to layered-2D rhombohedral ß-In 2 Se 3 by annealing under a trimethylindium (TMIn) flux. Samples were prepared in a metalorganic chemical vapor deposition (MOCVD) chamber, then transferred under vacuum to a surface analysis chamber for analysis with low-energy electron diffraction (LEED) and Auger electron spectroscopy. Additional ex situ characterization included x-ray diffraction, transmission-electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) elemental mapping, and Raman spectroscopy. The resulting single-crystal ß-In 2 Se 3 adopts the rhombohedral crystal structure (space group R-3m) and orientation of the underlying Bi 2 Se 3 , and the excess Bi atoms generated by this process create an underlying region of Bi-rich Bi x Se y . Due to the difference in bandgap between Bi 2 Se 3 and In 2 Se 3 , this conversion reaction presents a pathway to lateral heterojunctions if only selected regions are converted by masking the surface to spatially define the TMIn exposure. The conversion may also have implications for heteroepitaxy, because the in-plane lattice constants of Bi 2 Se 3 and In 2 Se 3 (0001) surfaces match those of InP and GaAs (111), respectively, and the natural cleavage planes of a layered-2D crystal facilitate substrate removal and reuse.

14 SOLAR ENERGY↗
DOE OSTI2025

New layered quaternary Zintl pnictide oxides Ba 2 Zn 2 Pn 2 O ( Pn = Sb, Bi): Discovery, crystal structures, band engineering, and transport properties

Three new heteroanionic oxypnictides, Ba 2 Zn 2 Sb 2 O, Ba 2 Zn 2 Bi 2 O, and the solid solution Ba 2 Zn 2 Sb 2−x Bi x O (x ≈ 1.1–1.6), have been synthesized and structurally characterized. They are isostructural with their Mn-bearing analog, adopting the Ba 2 Mn 2 Sb 2 O-type structure (space group P6 3 /mmc, No. 194), and feature a double-layered 2D $^{2}_{∞}$ [Zn 2 Pn 2 O] 2- substructure (Pn = Sb, Bi, Sb/Bi) composed of corner-sharing, distorted tetrahedral ZnPn 3 O units. Electronic structure calculations reveal a systematic progression from semiconducting Ba 2 Zn 2 Sb 2 O to metallic Ba 2 Zn 2 Bi 2 O as Bi content increases. These trends are corroborated by transport property measurements, with Ba 2 Zn 2 Sb 0.9(1) Bi 1.1 O exhibiting relatively low electrical resistivity, high Hall mobilities of ∼160 cm 2 /V·s, and large Seebeck coefficients from 69 to 132 μV K −1 over the 300–600 K temperature range. Comparison with structurally related Zintl pnictides, such as SrIn 2 As 2 and PrZn 3 As 3 phases, situates Ba 2 Zn 2 Pn 2 O (Pn = Sb, Bi) within a broader family of heteroanionic oxypnictide Zintl compounds, highlighting their structural flexibility and amenability to band engineering. Finally, electronic structure and bonding considerations point to tunable semiconducting behavior and underscore the relevance of these materials for thermoelectric and topological applications.

Band engineering↗
DOE OSTI2024

Type-II superconductivity at 9K in Pb–Bi alloy

In the present work, we report the synthesis of Pb–Bi alloy with enhanced Tc of up to 9K, which is higher than that of Pb. The alloy is synthesized via a solid-state reaction route in the vacuum-encapsulated quartz tube at 700°C in an automated furnace. The synthesized sample is characterized by X-ray Diffraction(XRD) and Energy dispersive X-ray analysis(EDAX) for its phase purity and elemental composition. Rietveld refinement of XRD reveals that the end product is a majority hexagonal Pb 7 Bi 3 , with minor rhombohedral Bi. The electronic transport measurement shows metallic behavior with the Debye temperature of 108K and a superconductivity transition temperature (T c ) below 9K, which is the maximum to date for any reported Pb–Bi alloy, Pb or Bi at ambient pressure. Partial substitution of Bi at the Pb site may modify the free density of electronic states within the BCS model to attain the optimum T c , which is higher by around 2K from the reported T c of Pb. The superconductor phase diagram derived from magneto-transport measurements reveals that the synthesized alloy is a conventional superconductor with an upper critical field (H c2 ) of 3.9 T, which lies well within the Pauli paramagnetic limit. The magnetization measurements carried out following ZFC(Zero Field Cool) protocols infer that the synthesized alloy is a bulk superconductor below 9K. The isothermal M-H(Magnetization vs. Field) measurements performed below T c establish it as a type-II superconductor. Furthermore, the specific heat capacity measurements show that the Pb–Bi alloy is a strongly coupled bulk superconductor below around 9K with possibly two superconducting gaps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Synthesis and Electrical Properties of a New Compound (BiSe) 0.97 (Bi 2 Se 3 ) 1.26 (BiSe) 0.97 (MoSe 2 ) Containing Metallic 1T-MoSe 2

The synthesis and electrical properties of a new misfit compound containing BiSe, Bi 2 Se 3 , and MoSe 2 constituent layers are reported. The reaction pathway involves competition between the formation of (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) and [(Bi 2 Se 3 ) 1+y ] 2 (MoSe 2 ). Excess Bi and Se are required in the precursor to synthesize (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ). High-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) confirm the stacking sequence of the heterostructure. Small grains of both 2H- and 1T-MoSe 2 are observed in the MoSe 2 layers. X-ray photoelectron spectroscopy (XPS) indicates that there is a significantly higher percentage of 1T-MoSe 2 in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) than in (BiSe) 0.97 (MoSe 2 ), suggesting that more charge transfer to MoSe 2 occurs due to the additional BiSe layer. The additional charge transfer results in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) having a low resistivity (14–19 μΩ m) with metallic temperature dependence. Furthermore, the heterogeneous mix of MoSe 2 polytypes observed in the XPS complicates the interpretation of the Hall data as two bands contribute to the electrical continuity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evolution of Highly Anisotropic Magnetism in the Titanium-Based Kagome Metals LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ )

Here, we present a family of titanium-based kagome metals of the form LnTi 3 Bi 4 (Ln: La···Gd 3+ , Eu 2+ , Yb 2+ ). Four previously unreported compounds are presented: YbTi 3 Bi 4 , GdTi 3 Bi 4 , NdTi 3 Bi 4 , and PrTi 3 Bi 4 . Single-crystal growth methods are provided alongside detailed magnetic and thermodynamic measurements across the entire series. The LnTi 3 Bi 4 family of compounds are orthorhombic (Fmmm), layered compounds that exhibit slightly distorted titanium-based kagome nets interwoven with zigzag lanthanide-based (Ln) chains. Crystals are easily exfoliated parallel to the kagome sheets, and angular resolved photoemission (ARPES) measurements highlight the intricacy of the electronic structure in these compounds. Density functional theory (DFT) and ARPES studies find Dirac points near the Fermi level, consistent with the kagome-derived band structure. The magnetic properties and the associated anisotropy emerge from the quasi-1D zigzag chains of Ln and impart a wide array of magnetic ground states ranging from anisotropic ferromagnetism to complex antiferromagnetism with a cascade of metamagnetic transitions. In conclusion, the combination of the kagome-based electronic structure and highly anisotropic Ln-based magnetism on an exfoliatable platform cements the LnTi 3 Bi 4 family as an interesting addition to the ever-expanding suite of kagome metals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable Perovskite-Derived Bismuth Halides: Cs 3 Bi 2 (Cl 1– x I x ) 9

Bismuth-based perovskites are of interest as safer alternatives to lead-based optoelectronic materials. Prior studies have reported on the compounds Cs 3 Bi 2 Cl 9 , Cs 3 Bi 2 I 9 , and Cs 3 Bi 2 Cl 3 I 6 . Here we examine a range of compounds of the formula Cs 3 Bi 2 (Cl 1–x I x ) 9 , where x takes values from 0.09 to 0.52. Powder and single-crystal X-ray diffraction were used to determine that all of these compounds adopt the layered vacancy-ordered perovskite structure observed for Cs 3 Bi 2 Cl 3 I 6 , which is also the high-temperature phase of Cs 3 Bi 2 Cl 9 . We find that, even with very small iodine incorporation, the structure is switched to that of Cs 3 Bi 2 Cl 3 I 6 , with I atoms displaying a distinct preference for the capping sites on the BiX 6 octahedra. Optical absorption spectroscopy was employed to study the evolution of optical properties of these materials, and this is complemented by density functional theory electronic structure calculations. Finally, three main absorption features were observed for these compounds, and with increasing x, the lowest-energy features are red-shifted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd–Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd 5 Bi 2 and conventional face-centered cubic (fcc) structured Pd 3 Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd 5 Bi 2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg Pd . After 10,000 cycles of ORR durability test, the monoclinic structured Pd 5 Bi 2 /C nanocatalysts still remain a MA of 1.52 A/mg Pd , which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd 3 Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd 5 Bi 2 /C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. Overall, this work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗