Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Beam final focus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

58 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Teacher Enhancement Institute

During the 1980's, a period of intense concern over educational quality in the United States, few indicators of U.S. student achievement garnered the interest of policy makers and pundits as successfully as the results of international testing in mathematics and science. This concern was so great that as a part of the Goals 2000 initiative, President George Bush indicated that 'By the year 2000, U.S. students should be first in the world in mathematics and science.' The Clinton Administration is placing a major emphasis, not only on rigorous academic standards and creating a new system for assessing students' progress, but also including professional development as a major focus. The argument being that teachers need more sustained, intensive training to prepare them to teach to higher standards. Executive order 12821 mandates that national laboratories 'assist in the mathematics and science education of our Nation's students, teachers, parents and the public by establishing programs at their agency to provide for training elementary and secondary school teachers to improve their knowledge of mathematics and science'. These and other issues led to the development of ideas for a project that addresses the need for excellence in mathematics, science and technology instruction. In response to these initiatives the NASA/LaRC Teacher Enhancement Institute was proposed. The TEI incorporated systemic reform perspectives, enhanced content knowledge for teachers, and teacher preparation. Emphasis was also placed on recruiting those educators who teach in impoverished urban school districts with at-risk student populations who have been traditionally under represented in science, mathematics, technology and engineering. Participants in the Teacher Enhancement Institute were 37 teachers from grades K-8, teaching in Region 2 in the state of Virginia, as well as 2 preservice teachers from Norfolk State University and one teacher from Dublin, Virginia, where a Science/Mathematics model school has been established. Teachers selected for this project represented school systems where income levels are extremely low, and students served tend not to receive innovative instruction in mathematics and science and their use of technology is limited. The Teacher Enhancement Institute contained several features, that when combined, allowed for a unique experience. Some of these features included local teachers, administrators and school board members as presenters, instruction and use of technology every day, tours of select features of the research facility, briefings by NASA/LaRC scientists, engineers and researchers as well as individuals from the Continuous Electron Beam Accelerator Facility (CEBAF). Another unique feature of this program is to have participants convene on three separate occasions throughout the academic year to discuss strategies for information dissemination and implementation results. Teachers' attitudes towards the use of technology, their ability to develop lessons using technology and their ability to develop lessons using information obtained through TEI were assessed using instruments developed by TEI summer faculty members. Data from these instruments were analyzed and reported in a final report submitted to the director of the Office of Education.

Marshall-Bradley, Tina↗
NASA NTRSDate not supplied

Anomalous and Ungrouped Carbonaceous Chondrites in the US Antarctic Meteorite Collection and their Potential Relevance to Ryugu and Bennu

With two different carbonaceous asteroid sample return missions in full swing, attention has focused on what connections can be made between the asteroid samples and the wide range of carbonaceous chondrite meteorites in worldwide collections. The US Antarctic meteorite collection contains nearly 1000 carbonaceous chondrites of various types including many in well-established groups as well as ungrouped, unusual or anomalous groups [1]. Some of the latter have been included in, or are possibly related to, recently proposed new carbonaceous chondrite classifications – CA and CY chondrites [2,3]. In addition to these, there are numerous ungrouped samples that have properties intermediate between established groups (like CM and CO; [4]), distinct from any other groups [5], or have anomalous properties that might be attributable to parent body processes such as heating, fluid interaction, or impacts [6]. Some CM anomalous or ungrouped chondrites share spectral features with Ryugu, which has a small hydration peak arguably due to hydrated minerals left after either impact heating or shock in carbonaceous chondrites [7]. PCA 91008, PCA 02012, GRO 95566, and LEW 85311 are all CMs that have experienced heating or metamorphism that may be due to impacts, solar radiation, or radiogenic decay [6]. These samples all have low H contents, C/H (bulk), and low 17O [6,8] and may hold clues to understanding the mineralogy of Ryugu, or interpretations of its spectral properties. WIS 91600, on the other hand, appears to be related to several other highly altered CM [6], and shares properties with the newly proposed CY chondrites [6]. An understanding of this grouplet will also aid in the interpretation of Bennu samples which have strong hydration features. In addition, ungrouped carbonaceous chondrites may provide valuable insights into the aqueous alteration potentially recorded in Bennu and Ryugu samples; such as the relatively moderate aqueous alteration recognized and dated at 4-5 myr after CAIs in MAC 88107 (C2-ungrouped) by [9] to the extensive aqueous alteration apparent in MIL 090292 (C1-ungrouped) [10]. Finally, LON 94101/94102 is a brecciated CM chondrite with numerous lithologies. Its appearance is similar to some of the brecciated lithologies visible at the surface of Bennu and Ryugu [11]. Although CM chondrites with multiple lithologies are common (e.g., [12]), the lithologies are often difficult to resolve at the hand specimen scale and only after some detailed e-beam characterization are the subtle lithologic differences evident (e.g., [13]). LON 94102 contains visibly distinct clasts at the hand specimen scale, relatively rare for CM breccias. The largest CM chondrites by mass from the U.S. Antarctic meteorite collection may provide insights into the extent of brecciation and heterogeneity within more typical CM chondrite-like source asteroids. For example, recent curation CT scans [14] show possible clasts within in a subsplit of ALH 83100 (CM1/2) which is the largest CM chondrite or CM chondrite pairing group in the U.S. Antarctic collection with an original mass of 3.019 kg. Similar work on additional subsplits or meteorites may aid our understanding of heterogeneity within CM chondrites from Antarctica. Initial classification of CM chondrites in U.S. Antarctic meteorite collection includes preliminary pairing when petrographically similar CM chondrites that have been previously found in the same field area. The two largest CM chondrite preliminary pairing groups by mass are the ALH 83102 (CM2) pairing group with an original mass of 2.554 kg and the EET 96005 (CM2) pairing group with an original mass of 1.125 kg. However, preliminary pairing groups assigned at classification—intrinsically— do not include stones that are petrographically distinct. Rigorous pairing group studies of CM chondrites from specific field sites are needed to investigate if there is unrecognized heterogeneity in CM chondrites from Antarctica that may represent common asteroid impactors (pre-atmospheric entry asteroids/meteoroids). Detailed pairing studies have the potential to recognize initial stones with multiple lithologies and investigate if there are stones that only sample one of those respective lithologies in the collection. These groups of heated CMs, extensively hydrated CMs, intermediate between CM and CO chondrites, and brecciated samples are all potentially relevant to Bennu and Ryugu samples, where heating, hydration, and brecciation have all come into play. These bodies might also be comprised of material intermediate to CM and CO chondrites, or at least distinct from the well-established CC groups. These small and unusual groups of carbonaceous chondrites may help to unlock new information about early solar system processes and aid in the understanding of the evolution of these carbonaceous asteroids.

meteorites↗
NASA NTRSDate not supplied

Metallic Powder Core Tubular Wire (PCTW) Development for Additive Manufacturing

NASA Langley Research Center (LaRC) in Hampton, VA, and the Center for Welding, Joining, and Coating Research (CWJCR) in the Department of Metallurgical and Materials Engineering at the Colorado School of Mines (CSM) in Golden, CO, have collaborated for nearly fifteen years to develop metallic powder core tubular wire (PCTW) feedstock for additive manufacturing (AM) using electron beam deposition. The motivation for this development was to offset dealloying observed during deposition of titanium and aluminum alloy solid wire feedstock in the LaRC electron beam freeform fabrication (EBF3) system and to explore novel alloy compositions by tailoring the powder fill. EBF3 is a fusion-based AM process that is performed under vacuum and is consequently prone to vaporization loss of low vapor pressure alloying elements. Research spanning four graduate student research projects succeeded in developing the basic methodology to fabricate PCTW, the mass balance equations used to define the powder fill, microstructure control through particulate inoculation, and the feasibility of producing metal matrix composite materials. Metallic PCTW is comprised of a thin foil sheath wrapped around a powder blend. Fabrication of PCTW at CSM was accomplished using a tubular wire mill system to first bend a flat strip into a u-shaped cross section, deposit a powder fill, create a lap joint to seal the wire, and draw to final diameter. Powder management systems were developed to ensure uniform mixing of powder constituents and identify feed rates for optimum fill ratios. Processing parameters were successfully developed for titanium and aluminum alloy sheaths to account for material work hardening during drawing. Mass balance equations were developed to account for compositional contributions of the sheath and powder fill. PCTW composition can be adjusted through selection of the sheath or powder materials. PCTWs were successfully developed to offset Al loss in deposits of Ti-6-4 and Mg loss in Al 6061, resulting in deposits that were within the composition limits for each material. Ti-6-4 deposits were fabricated using PCTW comprised of commercially pure (CP) titanium sheath and a fill of pre-alloyed Ti-6-4 powder with additions of elemental Al and V powders. Additions of both elements were required to account for the CP Ti from the sheath, and Al was further enhanced to offset documented losses in EBF3 deposits. For Al 6061 deposits, composition was modulated through the choice of sheath material. The PCTW was made using an Al 5052 sheath to supplement Mg content and a fill composition of pre-alloyed 6061 powder with additions of Si and Cu.The slower solidification rate of the EBF3 process compared with laser powder bed fusion processes can lead to coarse-grained microstructures and mechanical property anisotropy. EBF3deposits of Ti-6-4 exhibited large epitaxially grown β grains, which result in degraded mechanical properties in the deposition direction. Microstructure refinement was achieved through a combination of electron beam modulation and the use of a PCTW designed for Ti-6-4 deposits and modified by the addition of powder made from Fe and B. Resulting deposits exhibited reductions in β grain size, α phase colony intercept length and lath width, and an increased volume fraction of β phase. The mechanism of microstructure refinement was related to precipitation of boride particles. Hardness testing confirmed that mechanical property anisotropy was reduced and an overall increase in hardness was achieved.Metal matrix composite (MMC) materials offer strength and stiffness benefits over unreinforced materials. Two methods were investigated using PCTW technology for producing Al 6061 basedMMC materials; the direct addition of SiC reinforcing particles and the in-situ generation of reinforcements through reaction synthesis of precursor powders. Al 6061 based MMCs reinforced with SiC exhibited particle clustering and formation of aluminum carbides during deposition. The application of a Ni coating to the SiC particles prior to incorporation into the powder fill eliminated aluminum carbide formation and aided particle distribution during deposition. Modulation of beam focus and power further reduced aluminum carbide formation and aided particle distribution. In reaction synthesis, precursor additions undergo an exothermic reaction during deposition to form new ceramic products, generally of finer scale than the initial precursor components. The product phases provide reinforcement in the MMC and act as nucleation sites during solidification, resulting in grain refinement, improved mechanical properties, and reduced susceptibility to solidification cracking. Higher tensile strength and stiffness were demonstrated in Al 6061 based MMCs with 2 vol% reinforcement. These combined research efforts demonstrate the potential of PCTW technology for customizing of alloy composition and achieving microstructure control. A manufacturing process for titanium- and aluminum-based PCTWs was developed based on iterative design, theoretical calculations, and empirical data. PCTW technology successfully mitigated Al loss from Ti-6-4 and Mg loss in Al 6061, resulted in grain refinement in Ti-6-4, and demonstrated fabrication of Al based MMCs

Marcia S Domack↗
NASA NTRS2020

Investigation of Magmatic Activities on Early Mars Using Igneous Mineral Chemistry in Gale Crater, Mars

One objective of rover missions is exploring the geological context of the surroundings. Over the years, igneous petrology and sedimentology have been disconnected, the first investigating magmatic processes and volcanic activities, and the second seeking environmental conditions in the past and assessing the habitability of the planet. Although different, one is related to the other: igneous rocks are altered and broken down, leading to the formation of sedimentary rocks, which can in turn be used to back out the nature of their magmatic source. The Curiosity rover that landed in the 3.7 Gyr old impact crater Gale is traveling through sedimentary rocks. About fifty float rocks have been observed, and several of them with ambiguous texture and composition have been classified as igneous or sedimentary depending on studies such as Jake_M. The composition of several unambiguous igneous rocks has been analyzed [4- 6] but their heterogeneity at a larger instrumental (measurement size < 2 cm) scale prevents the measurement of a bulk composition as performed on Earth. An original approach avoiding these two last issues is to consider igneous mineral chemistry analyzed within igneous and sedimentary rocks to assess magmatic processes that could have formed them. Most Curiosity data are used to explore ancient environmental conditions, and a significant number of compositional analyses are under-explored for constraining magmatic activities. We will present how we can make use of sedimentary data for investigating igneous processes in the vicinity of Gale crater. Geological Context: We focus on the first 750 martian days, corresponding to measurements in a coherent lacustrine sedimentary unit called Bradbury, because all sedimentary rocks were sourced from the same watershed and appear to have a consistent source with minimal alteration [2-3]. Igneous detrital minerals including feldspar and pyroxene, are observed in sedimentary rocks. Monte Carlo models showed that minimal cation loss is observed based on the composition of all Bradbury rocks, implying negligible weathering [3]. Although clay minerals are detected in few rocks [7], chemical compositions of rocks can be explained by a mixture of primary igneous minerals [3]. Variation of composition within Bradbury rocks can be explained by mineral sorting and one distinct source component. While a common magmatic source is suggested, Bradbury sediments likely come from several volcanic eruptions from a single magmatic chamber [9- 10]. The occurrence of alkali minerals like sanidine and K-rich rocks throughout Bradbury supports the presence of a potassic component, likely trachytic, while plagioclase and a mafic composition suggest a basaltic component [8-9]. Instruments: Mineral chemistry can be estimated by three instruments onboard Curiosity. The CheMin instrument enables detection of mineral assemblages using X-ray diffraction (XRD). Using Rietveld refinement, each mineral is identified according to their 1D XRD pattern [11]. Note that distinction between pyroxene minerals is challenging with the CheMin instrument due to overlapping peaks on XRD patterns and low angular resolution of the instrument [12]. Then, using least square regression and optimization algorithms based on unit-cell parameters, mineral chemistry has been estimated by [11]. Plagioclase composition has been estimated using the NaAlSi3O8- CaAl2Si2O8 system and alkali feldspar is based on the NaAlSi3O8-KAlSi3O8 system (stars in Fig.1). Two mudstone samples (John Klein and Cumberland) and one sandstone sample (Windjana) were analyzed by CheMin at Yellowknife Bay and Kimberley, respectively. Figure 1. Ternary diagrams of feldspars (top) and pyroxene (bottom) quadrilateral. Stars correspond to CheMin composition and the gray patches to ChemCam composition. The colored dots are the composition of feldspar and pyroxene that crystallized during fractional crystallization at FMQ+1 of a melt extracted at distinct melting degree during the adiabatic ascent of a primitive mantle composition, without any water (left panels) and with 0.5 wt.% of water (right panels) at distinct pressure. The ChemCam instrument enables the analysis of the chemical compositions of rocks at hundreds of micrometer scale (350-550 μm) using laser induced breakdown spectroscopy (LIBS), which may provide the composition of minerals when they are larger than the beam spot (>550 μm) [13]. Within >5000 LIBS points, we performed a typical stoichiometric filtering allowing us to distinguish 56 feldspar and 10 pyroxene mineral compositions (grey patches in Fig. 1). Finally, the Alpha Particle X-ray Spectrometer (APXS) analyzes the composition of rocks with a 1.6 cm diameter spot size. Monte Carlo mass balance modeling allowed [3] to decipher a feldspar range varying between An30 and An40 (Fig. 1). Discussion: Although there could be a more complex history and other ways to form the whole compositional range of igneous minerals analyzed within the Bradbury formation, we are presenting here simple magmatic pathways commonly occurring on Earth using the thermodynamical softwares pMELTS and rhyoliteMELTS [14]. The objective is to find reasonable igneous processes that produce minerals that parallel the compositions of feldspar and pyroxene analyzed by the Curiosity rover. As commonly observed for mid-ocean ridge basalts, the adiabatic ascent of a primitive mantle composition [15] partially melting at 2 GPa has been modeled, followed by the extraction of a liquid at distinct degrees of partial melting, which undergoes fractional crystallization at an oxygen fugacity +1 log unit above the fayalite-magnetite-quartz (FMQ) buffer within the crust (0.02-0.4 GPa) with H2O = 0- 0.5 wt. %. These latter conditions correspond to those recorded within igneous clasts from the Noachian martian breccia NWA 7034 and paired and within Gale igneous rocks (colored dots in Fig. 1) [16-17]. To check the reliability of these 2-step models, we also tested fractional crystallization at similar conditions (FMQ+1; P=0.02-0.4 GPa; H2O = 0-0.5 wt. %) of starting compositions corresponding to that of magmas with distinct melting degrees obtained from isobaric experiments at 2 GPa [18]. Mineral compositions obtained from both models are similar. As shown on Fig. 1, the whole range of observed feldspar compositions cannot be reproduced by fractionation of one magma only. Indeed, while alkali feldspar and Na-plagioclase likely crystallized from fractional crystallization of a low-degree melt (here <15%), plagioclase and pyroxene can only be formed by fractional crystallization of a higher degree melt (here >19%). The corresponding liquid descent lines are broadly in agreement with compositions estimated by ChemCam corresponding to float igneous rocks (Fig. 2) [4-6]. Figure 2. Silica versus alkali content. Lines show the liquid lines of descent from magmas with distinct degrees of melting. Gray patches represents the composition of Gale igneous rocks [4-6]. Trachytic to rhyolitic magmas crystallize alkali feldspar, and andesite to dacite magmas likely form plagioclase. Therefore, at least two starting magmas at distinct melting degrees, which could easily come from a single mantle source, are necessary to explain the whole compositional range of feldspar and pyroxene analyzed within Bradbury rocks. Conclusion: Because rocks from the Bradbury formation are likely originating from the same magmatic source with minimal weathering as supported by several studies using different approaches, igneous mineral chemistry analyzed by CheMin and ChemCam allows us to back out reasonable magmatic pathways that could have crystallized them. Fractional crystallization of at least two starting magmas originating from distinct melting degrees of a single mantle source can explain the whole range of feldspar and pyroxene composition. Both alkaline and sub-alkaline liquids can be produced, with compositions corresponding to those of the igneous rocks analyzed by ChemCam within the Bradbury formation, highlighting the complexity of Mars magmatism.

Payre, V.↗