Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

CeTaN 3 and CeNbN 3 : Prospective Nitride Perovskites with Optimal Photovoltaic Band Gaps

Perovskites constitute an exceptionally tunable materials family with diverse applications in electronics, optoelectronics, energy, and quantum technologies. Out of the thousands of known perovskites, the majority of compounds are oxides, halides, and chalcogenides. In contrast, only two nitride perovskites are currently known. In this work we perform a thorough ab initio computational screening of possible nitride perovskites, and we identify two new compounds, CeNbN 3 and CeTaN 3 , with band gaps in the near-infrared to visible range, depending on temperature. In their room-temperature orthorhombic phase, we predict that both compounds exhibit direct or quasidirect band gaps in the range 1.1–2.0 eV, with the Pnma phases matching the Shockley–Queisser limit for photovoltaic energy conversion efficiency. Further, these compounds are also predicted to be strong light absorbers, with absorption coefficients surpassing those of high-performance semiconductors such as GaAs and CH 3 NH 3 PbI 3 . The present findings reveal a potentially new class of nitride semiconductors with promise for electronics, optoelectronics, and light harvesting and for integration with existing nitride-based lighting technology.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Interlayer coupling in two-dimensional MoS 2 and phosphorene bilayers: Benchmark quantum Monte Carlo study of interaction energies and quasiparticle band gaps

Using high-accuracy many-body quantum Monte Carlo (QMC) methods, we study the effect of interlayer coupling on the properties of two-dimensional freestanding bilayers (BLs) of MoS 2 and phosphorene. The properties of the two BL-materials are very different and largely determined by the interlayer interaction, which is purely van der Waals in MoS 2 and partially electronic/chemical in phosphorene, resulting in a modest layer-dependent property modulation in MoS 2 and strong modulation in phosphorene. Multireference and symmetry considerations are used to construct state-of-the-art accuracy QMC trial wave functions. We determine the quasiparticle band gaps for both materials, $Δ^{\textrm{qp}}_{Γ→\textrm{K}}$ = 2.45 ± 0.05 eV in BL-MoS 2 and $Δ^{\textrm{qp}}_{Γ→Γ}$=1.59 ±0.1eV in BL-phosphorene. In conclusion, these benchmark band-gap values make it possible to consolidate the interpretation of the widely scattered experimental and theory data.

Huang, Yongda [Slovak Academy of Sciences (SAS), B↗
DOE OSTI2020

Phase‐Dependent Band Gap Engineering in Alloys of Metal‐Semiconductor Transition Metal Dichalcogenides

Abstract Bandgap engineering plays a critical role in optimizing the electrical, optical and (photo)‐electrochemical applications of semiconductors. Alloying has been a historically successful way of tuning bandgaps by making solid solutions of two isovalent semiconductors. In this work, a novel form of bandgap engineering involving alloying non‐isovalent cations in a 2D transition metal dichalcogenide (TMDC) is presented. By alloying semiconducting MoSe 2 with metallic NbSe 2 , two structural phases of Mo 0.5 Nb 0.5 Se 2 , the 1T and 2H phases, are produced each with emergent electronic structure. At room temperature, it is observed that the 1T and 2H phases are semiconducting and metallic, respectively. For the 1T structure, scanning tunneling microscopy/spectroscopy (STM/STS) is used to measure band gaps in the range of 0.42–0.58 at 77 K. Electron diffraction patterns of the 1T structure obtained at room temperature show the presence of a nearly commensurate charge density wave (NCCDW) phase with periodic lattice distortions that result in an uncommon 4 × 4 supercell, rotated approximately 4° from the lattice. Density‐functional‐theory calculations confirm that local distortions, such as those in a NCCDW, can open up a band gap in 1T ‐Mo 0.5 Nb 0.5 Se 2 , but not in the 2H phase. This work expands the boundaries of alloy‐based bandgap engineering by introducing a novel technique that facilitates CDW phases through alloying.

Wang, Shuxi↗
DOE OSTI2023

Insulating band gaps both below and above the Néel temperature in d -electron LaTi O 3 , LaV O 3 , SrMn O 3 , and LaMn O 3 perovskites as a symmetry-breaking event

Metal d-electron oxides having an odd number of electrons per cell should exhibit band degeneracy at the Fermi energy, making them, in band theory, formally metallic. In many cases, however, these are “false metals”, as evidenced by the observation that many ABO 3 oxide perovskites with a magnetic 3d B-atom are observed to be insulators both below and above the Néel temperature. These inconsistencies between experimental observation and expectation have historically been resolved by invoking degeneracy-breaking physics, based largely on -pure electron effects, such as strong interelectronic correlation for d-electron compounds (the Mott mechanism). Such explanations generally consider microscopic lattice or magnetic degrees of freedom (m-DOF) as largely passive spectators, not a cause of the formally metallic being an insulator. Yet, it has long been known that ABO 3 perovskites can manifest an arrangement of m-DOFs in the form of octahedral tilting, bond dimerization, Jahn-Teller distortions, and ordering of local magnetic moments. It appears reasonable that such structural and magnetic local degrees of freedom need to be allowed to compete with purely electronic strong correlation. To answer this question, we explored a range of d-electron oxide perovskites exemplified by the archetypes LaTiO 3 , LaVO 3 , SrMnO 3 , and LaMnO 3 with 1, 2, 3, or 4 d -electrons, respectively. Using a mean-field-like electronic structure method (here, density functional theory), we find that a combination of magnetic symmetry breaking with structural distortions can account for insulating band gaps in this series while at the same time correctly predicting for the control case an intrinsic paramagnetic metal in SrVO 3 as symmetry-breaking is insufficiently strong to remove the degeneracy. Finally, this indicates that calculating quantitatively local magnetic and positional symmetry-breaking motifs in unit cells that avoid averaging at the outset over the low symmetry motifs can provide consistent trends in a Mott transition without Mott U.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Low-phase-noise surface-acoustic-wave oscillator using an edge mode of a phononic band gap

Low-phase-noise microwave-frequency integrated oscillators provide compact solutions for various applications in signal processing, communications, and sensing. Surface acoustic waves (SAWs), featuring orders-of-magnitude shorter wavelength than electromagnetic waves at the same frequency, enable integrated microwave-frequency systems with much smaller footprint on chip. SAW devices also allow higher-quality (Q) factors than electronic components at room temperature. Here, we demonstrate a low-phase-noise gigahertz-frequency SAW oscillator on 128°Y-cut lithium niobate, where the SAW resonator occupies a footprint of 0.05 mm 2 . Leveraging phononic crystal band-gap-edge modes to balance between Q factors and insertion losses, our 1-GHz SAW oscillator features a low phase noise of -132.5 dBc/Hz at a 10-kHz offset frequency and an overlapping Hadamard deviation of 6.5 × 10 -10 at an analysis time of 64 ms. The SAW resonator-based oscillator holds high potential in developing low-noise sensors and acousto-optic integrated circuits.

42 ENGINEERING↗
DOE OSTI2024

Simple self-consistent method for excited states in density functional theory to characterize defect-derived behavior in wide-band-gap-based microelectronic materials

This final report summarizes the results of the Laboratory Direct Research and Development (LDRD) Project Number 229740. Wide band gap semiconductors such as gallium nitride (GaN) have features highly desirable for multiple mission electronic applications. Realization of their potential requires atomic-scale understanding of electronic behavior. The principal experimental tools for electronically probing defects in GaN are chemically undifferentiating and lack a practical theoretical counterpart needed to identify and characterize specific defects. This project investigated whether a simple idea for modeling defect excited states and their associated photoluminescence (PL) energies is viable, as a path to accelerate the understanding of defect behavior and gain valuable insights into engineering new electronic materials and devices. The research implemented a non-self-consistent total-energy evaluation of a Koopmans-type estimation of an excited electronic state energy in density functional theory (DFT) calculations, and proceeded to design, implement, and assess a self-consistent method for computing excited states based upon an OCcupation-Constrained-DFT (occ-DFT). The occ-DFT was verified in test calculations of defect excited states and validated against well-characterized PL data for 3d transition metal defects in GaN. The method proved stable and robust in computing excited states and gave accurate predictions compared to experimental PL data. The combined ground state/excited-state capability proved capable of chemically differentiating defect species in GaN. In application to 3d dopants in GaN, we reinterpreted extensive experimental literature, proposed new defects as prospective candidates for use in quantum information applications, and outlined design strategies to create and exploit these potentially useful functional defects in GaN.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Probing room temperature indirect and minimum direct band gaps of h-BN

Abstract Hexagonal boron nitride (h-BN) has attracted considerable interest as an ultrawide bandgap (UWBG) semiconductor. Experimental studies focused on the detailed near band-edge structure of h-BN at room temperature are still lacking. We report a direct experimental measurement of the near band-edge structure performed on h-BN quasi-bulk wafers via photocurrent excitation spectroscopy (PES). PES resolved the band-to-band transitions near M- and K-points in the Brillion zone (BZ), from which the room temperature indirect band gap of E g M K ∼6.02 eV, minimum direct bandgap at M-point of E g M = 6.36 eV and next lowest direct energy bandgap at K-point of E g K = 6.56 eV , have been simultaneously determined for the first time experimentally. The measured energy differences between K- and M-points in the conduction band minimum (CBM) and valence band maximum (VBM) are Δ E C M K = 0.54 eV and Δ E V M K = 0.34 eV, respectively, in good agreement with the calculation results. Significantly differing from its III-nitride wurtzite counterparts, in which only electrons and holes in the conduction and valence band extremes at the Γ-point are predominantly involved in the optical and transport processes, the results highlighted that charge carriers associated with both M- and K-valleys control to the optical excitation, recombination and charge transport processes in h-BN.

Physics↗
DOE OSTI2021

Probing the Electronic Band Gap of Solid Hydrogen by Inelastic X-Ray Scattering up to 90 GPa

Metallization of hydrogen as a key problem in modern physics is the pressure-induced evolution of the hydrogen electronic band from a wide-gap insulator to a closed gap metal. However, due to its remarkably high energy, the electronic band gap of insulating hydrogen has never before been directly observed under pressure. Using high-brilliance, high-energy synchrotron radiation, we developed an inelastic x-ray probe to yield the hydrogen electronic band information in situ under high pressures in a diamond-anvil cell. Here, the dynamic structure factor of hydrogen was measured over a large energy range of 45 eV. The electronic band gap was found to decrease linearly from 10.9 to 6.57 eV, with an 8.6 times densification (ρ/ρ 0 ~ 8.6 ) from zero pressure up to 90 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Pressure-Induced Superconductivity in the Wide-Band-Gap Semiconductor Cu 2 Br 2 Se 6 with a Robust Framework

We report pressure-induced superconductivity in a ternary and nonmagnetic Cu-containing semiconductor, Cu 2 Br 2 Se 6 , with a wide band gap of 1.89 eV, in which the Cu and Br atoms generate infinite 2, helical chains along the c-axis and are linked by the cyclohexane-like Se 6 rings to form a three-dimensional framework. We find that this framework is remarkably robust under compression, and the ambient-pressure phase survives at least to our experimental limit of 32.1 GPa. Concurrent semiconductor-to-metal transition and superconductivity are observed above 21.0 GPa. The superconducting temperature monotonically increases from 4.0 to 6.7 K at 40.0 GPa. Furthermore, first-principles calculations show that the emergence of superconductivity is associated with the formation of weak multicentered bonds that involve the increase in coordination of the Cu atoms and a subset of the Se atoms. The observation of superconductivity in this type of nonmagnetic transition-metal-based material will inspire the exploration of related new superconductors under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Efficient Broadband Terahertz Generation by Above‐Band‐Gap Excitation of the Pyroelectric ZnSnN 2

Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN 2 , and find that its above-band-gap excitation results in the efficient formation of an ultrafast photocurrent generating THz radiation. The resulting THz electric field spans a frequency range from below 1 THz to above 30 THz. The results suggest that the photocurrent is primarily driven by an ultrafast pyroelectric effect where the photo-excited carriers screen the spontaneous electric polarization of ZnSnN 2 . Strong structural disorder reduces the photocarrier lifetime significantly and, thus, enables broadband operation. ZnSnN2 shows a similar THz-emitter performance as the best spintronic THz emitters regarding bandwidth and amplitude. The study unveils the large potential of pyroelectric materials as efficient and broadband THz emitters with built-in bias fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Employing a Narrow-Band-Gap Mediator in Ternary Solar Cells for Enhanced Photovoltaic Performance

Ternary organic solar cells (OSCs) provide a convenient and effective means to further improve the power conversion efficiency (PCE) of binary ones via composition control. However, the role of the third component remains to be explored in specific binary systems. Herein, we report ternary blend solar cells by adding the narrow-band-gap donor PCE10 as the mediator into the PBDB-T:IDTT-T binary blend system. The extended absorption, efficient fluorescence resonance energy transfer, enhanced charge dissociation, and induced tighter molecular packing of the ternary blend films enhance the photovoltaic properties of devices and deliver a champion PCE of 10.73% with an impressively high open-circuit voltage (VOC) of 1.03 V. Good miscibility and similar molecular packing behavior of the components guarantee the desired morphology in the ternary blend films, leading to solar cell devices with over 10% PCEs at a range of compositions. Our results suggest that ternary systems with properly aligned energy levels and overlapping absorption among the components hold great promises to further enhance the performance of corresponding binary ones.

14 SOLAR ENERGY↗
DOE OSTI2021

3-D Prismatic Packaging Methodologies for Wide Band Gap Power Electronics Modules

In a power module the parasitic inductance limits the dynamic high-frequency performance, and the area of the cooling surfaces limits the power capability. This paper presents a new 3D power electronic design methodology based on the concept of mutual inductance cancellation and multi-sided heat transfer. New 3D prismatic packaging concepts are proposed for Wide Band Gap (WBG) power devices, where the devices can be mounted at acute angles to adjacent interconnects or other devices. Discussion is given on electrical and thermal path optimization in a 3D space. To validate the 3D prismatic packaging methodology, a 1200V/50A SiC half-bridge power module is fabricated and tested for electrical and thermal performance and results are compared with simulations. The power density calculated for the module is 12 kW/in3 (including heatsink) and shows a 31.3% inductance reduction compared to a 2D planar module. Finally, design guidance suggested for utilizing prismatic structures is provided, together with suggested future work in the area. This paper presents the first reported true 3D power module.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Band gap dependence of exciton Lande factor in lead halide perovskites

The optical properties of lead halide perovskite semiconductors in vicinity of the bandgap are controlled by excitons, so that investigation of their fundamental properties is of critical importance. The exciton Landé or g-factor g X is the key parameter, determining the exciton Zeeman spin splitting in magnetic fields. The exciton, electron, and hole carrier g-factors provide information on the band structure, including its anisotropy, and the parameters contributing to the electron and hole effective masses. Here, g X is measured by reflectivity in magnetic fields up to 60 T for lead halide perovskite crystals. The materials band gap energies at a liquid helium temperature vary widely across the visible spectral range from 1.520 up to 3.213 eV in hybrid organic–inorganic and fully inorganic perovskites with different cations and halogens: FA 0.9 Cs 0.1 PbI 2.8 Br 0.2 , MAPbI 3 , FAPbBr 3 , CsPbBr 3 , and MAPb(Br 0.05 Cl 0.95 ) 3 . The exciton g-factors are found to be nearly constant, ranging from +2.3 to +2.7. Thus, the strong dependences of the electron and hole g-factors on the bandgap roughly compensate each other when combining to the exciton g-factor. The same is true for the anisotropies of the carrier g-factors, resulting in a nearly isotropic exciton g-factor. The experimental data are compared favorably with model calculation results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Rb 4 CuSb 2 Cl 11 and Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O: Wide Band Gap 0D Metal Halide Semiconductors

Herein, we report the discovery, structural and photophysical characterization of a new zero-dimensional (0D) lead-free all-inorganic halide, Rb 4 CuSb 2 Cl 11 , which adopts a new structure type. Single-crystal X-ray diffraction (SCXRD) shows that the structure consists of isolated, distorted seesaw [SbCl 4 ] − and trigonal planar [CuCl 3 ] 2− units, separated by Rb + cations that provide charge balance. Optoelectronic measurements and density functional theory (DFT) calculations indicate an indirect band gap of 2.89 eV, making it a candidate for wide-bandgap optoelectronic applications. Electrical resistivity was measured at 1.29 × 10 10 Ω·cm, and the trap-state density (n trap ) was found to be 7.44 × 10 10 cm −3 . Attempts to synthesize substitution analogs of Rb 4 CuSb 2 Cl 11 led to the synthesis of Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O, which was erroneously reported as Rb 2 SbCl 5 O in a previous study. Rb 2 In 0.91(0.2) Sb 0.09 Cl 5 ·H 2 O adopts a vacancyordered perovskite structure and exhibits broad-band yellow emission under UV excitation. The measured photoluminescence quantum yield (PLQY) for Rb 2 In 0.91 (0.2)Sb 0.09 Cl 5 ·H 2 O is 18.2%. These findings add to the growing class of quaternary metal halides with multiple cation and anion compositions, expanding the chemical phase space for the discovery of new materials with functional properties.

Crystal structure↗
DOE OSTI2023

Weak Dispersion of Exciton Landé Factor with Band Gap Energy in Lead Halide Perovskites: Approximate Compensation of the Electron and Hole Dependences

The optical properties of lead halide perovskite semiconductors in vicinity of the bandgap are controlled by excitons, so that investigation of their fundamental properties is of critical importance. The exciton Landé or g-factor g X is the key parameter, determining the exciton Zeeman spin splitting in magnetic fields. The exciton, electron, and hole carrier g-factors provide information on the band structure, including its anisotropy, and the parameters contributing to the electron and hole effective masses. Here, g X is measured by reflectivity in magnetic fields up to 60 T for lead halide perovskite crystals. The materials band gap energies at a liquid helium temperature vary widely across the visible spectral range from 1.520 up to 3.213 eV in hybrid organic–inorganic and fully inorganic perovskites with different cations and halogens: FA 0.9 Cs 0.1 PbI 2.8 Br 0.2 , MAPbI 3 , FAPbBr 3 , CsPbBr 3 , and MAPb(Br 0.05 Cl 0.95 ) 3 . The exciton g-factors are found to be nearly constant, ranging from +2.3 to +2.7. Thus, the strong dependences of the electron and hole g-factors on the bandgap roughly compensate each other when combining to the exciton g-factor. The same is true for the anisotropies of the carrier g-factors, resulting in a nearly isotropic exciton g-factor. The experimental data are compared favorably with model calculation results.

36 MATERIALS SCIENCE↗