Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BREEDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Transmission Electron Microscopy based Characterization of a U-20Pu-10Zr Fuel Irradiated in Experimental Breeder Reactor-II

U-Pu-Zr metallic fuels are important fuel candidate for future advanced and/or test reactors. To better understand fuel performance and guide future fuel development, a U-20Pu-10Zr (in weight) metallic fuel irradiated in the Experimental Breeder Reactor was revisited using advanced electron microscopies. This fuel was irradiated to a burnup of 7.6 % at a peak cladding temperature of 521 °C. In this research, several transmission electron microscopy samples were extracted from different but representative radial locations of the fuel cross section using focused ion beam technique. Phase identification and chemical analysis with sub-micron spatial resolution was carried out using scanning transmission electron microscopy. Multiple phenomena that are critical to fuel performance, such as Zr phase and its distribution in a different matrix, were revealed in an unpreceded and highly detailed manner. An improved understanding of fuel reconstruction in U-Pu-Zr metallic fuel under reactor irradiation is provided.

36 MATERIALS SCIENCE↗

Disruptive thermal-spectrum molten salt breeder reactor fuel cycle technologies

Multiple, disruptive fuel salt processing technologies for thermal-spectrum molten salt breeder reactors (TS-MSBRs) have been conceived of and brought to laboratory levels of maturity since the termination of the historic U.S. government program. This paper describes these technologies and the role that they could serve in decreasing the remaining technical risks for TS-MSBR deployment. In conclusion, the focus of the paper is on describing how the technologies could integrate into a dramatically simpler, proliferation resistant fuel salt processing system as well as identifying remaining development hurdles.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Combined low-temperature scanning tunneling/atomic force microscope for atomic resolution imaging and site-specific force spectroscopy

The authors present the design and first results of a low-temperature, ultrahigh vacuum scanning probe microscope enabling atomic resolution imaging in both scanning tunneling microscopy (STM) and noncontact atomic force microscopy (NC-AFM) modes. A tuning-fork-based sensor provides flexibility in selecting probe tip materials, which can be either metallic or nonmetallic. When choosing a conducting tip and sample, simultaneous STM/NC-AFM data acquisition is possible. Noticeable characteristics that distinguish this setup from similar systems providing simultaneous STM/NC-AFM capabilities are its combination of relative compactness (on-top bath cryostat needs no pit), in situ exchange of tip and sample at low temperatures, short turnaround times, modest helium consumption, and unrestricted access from dedicated flanges. The latter permits not only the optical surveillance of the tip during approach but also the direct deposition of molecules or atoms on either tip or sample while they remain cold. Atomic corrugations as low as 1 pm could successfully be resolved. In addition, lateral drifts rates of below 15 pm/h allow long-term data acquisition series and the recording of site-specific spectroscopy maps. Results obtained on Cu(111) and graphite illustrate the microscope's performance.

36 MATERIALS SCIENCE↗

Electron cyclotron resonance charge breeder ion source simulation by MCBC and GEM

Numerical simulation results by the GEM and MCBC codes are presented, along with a comparison with experiments for beam capture dynamics and parameter studies of charge state distribution (CSD) of electron cyclotron resonance charge breeder ion sources. First, steady state plasma profiles are presented by GEM with respect to key experimental parameters such as rf power and gas pressure. As rf power increases, electron density increases by a small amount and electron energy by a large amount. The central electrostatic potential dip also increased. Next, MCBC is used to trace injected beam ions to obtain beam capture profiles. Using the captured ion profiles, GEM obtains a CSD of beam ions. As backscattering can be significant, capturing the ions near the center of the device enhances the CSD. The effect of rf power on the beam CSD is mainly due to different steady states plasmas. Example cases are presented assuming that the beam ions are small enough not to affect the plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated modeling of electron cyclotron resonance ion sources and charge breeders with GEM, MCBC, and IonEx

A numerical toolset to help in understanding physical processes in the electron cyclotron resonance charge breeder (ECRCB) and further to help optimization and design of current and future machines is presented. The toolset consists of three modules (Monte Carlo charge breeding code, generalized electron cyclotron resonance ion source modeling, and ion extraction), each modeling different processes occurring in the ECRCB from beam injection to extraction. The toolset provides qualitative study, such as parameter studies, and scaling of the operation, and physical understanding in the ECRCB. The methodology and a sample integrated modeling are presented.

43 PARTICLE ACCELERATORS↗

Accident analysis of heavy water cooled thorium breeder reactor

Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of < 0.2% dk/k, and negative coolant reactivity coefficient. One of the nuclear reactor accidents types examined here is Unprotected Transient over Power (UTOP) due to withdrawing of the control rod that result in the positive reactivity insertion so that the reactor power will increase rapidly. Another accident type is Unprotected Loss of Flow (ULOF) that caused by failure of coolant pumps. To analyze the reactor accidents, neutron distribution calculation in the nuclear reactor is the most important factor. The best expression for the neutron distribution is the Boltzmann transport equation. However, solving this equation is very difficult so that the space-time diffusion equation is commonly used. Usually, space-time diffusion equation is solved by employing a point kinetics approach. However, this approach is less accurate for a spatially heterogeneous nuclear reactor and the nuclear reactor with quite large reactivity input. Direct method is therefore used to solve space-time diffusion equation which consider spatial factor in detail during nuclear reactor accident simulation. Set of equations that obtained from full implicit finite-difference method is solved by using iterative methods. The indication of UTOP accident is decreasing macroscopic absorption cross-section that results large external reactivity, and ULOF accident is indicated by decreasing coolant flow. The power reactor has a peak value before reactor has new balance condition. The analysis showed that temperatures of fuel and claddings during accident are still below limitations which are in secure condition.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Design of an experimental breeder reactor run 138B reactor physics benchmark evaluation management application

Reactor Monte Carlo simulations present numerous challenges including input file generation and processing output files for relevant results. Creating an input file for a heterogeneous core is further complicated when using depleted fuel. Performing perturbations to geometry and material characteristics exacerbates the challenge due to human errors if the input files are manually generated. The difficulty of generating input files is often encountered during the process of performing a reactor physics benchmark evaluation. These challenges were encountered in this study when performing a reactor physics benchmark evaluation for the Experimental Breeder Reactor II (EBR-II), a sodium cooled fast reactor. The EBR-II Monte Carlo input file uses more than 1,000 unique material specifications and ~8,000 regions. To address the input file generation challenge, a computer application was designed to automate the input file generation process. The application utilizes user input from a graphical user interface in conjunction with spreadsheets containing material and geometric data to generate Monte Carlo input files. The application, called MICKA, was used to generate input files to support the reactor physics benchmark evaluation for EBR-II. This paper describes the reactor configuration and provides information about the application design and capabilities for addressing challenges often encountered in reactor physics benchmark evaluations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dissolution of Low Enriched Uranium from Experimental Breeder Reactor-II Fuel

A dissolution flowsheet for the Low Enriched Uranium (LEU) ingots generated at the Idaho National Laboratory (INL) from the electrochemical processing of the EBR-II fuel was demonstrated at the laboratory scale. Dissolution experiments were performed using samples of the LEU and a carbon steel can and an integrated experiment was performed in which an Al 1100 alloy was dissolved as a surrogate for Spent Nuclear Fuel (SNF) followed by the dissolution of samples of the LEU and carbon steel can to demonstrate the complete flowsheet. The flowsheet allows the dissolution of a SNF batch in an H-Canyon dissolver using existing flowsheets followed by the dissolution of nominally 75 kg of LEU in the 6.4D dissolver or 45 kg of LEU in the 6.1D dissolver which were recovered from the Experimental Breeder Reactor-II (EBR-II) fuel. In the demonstration experiment, the rate of dissolution of the LEU metal was significantly slower than the dissolution rate of the Al 1100 alloy (4.7 versus 27 mg/min/cm 2 ) which projects to a longer cycle time for the LEU metal (compared to a SNF charge). Here, the H 2 generation rates from the dissolution of samples of the LEU metal and a carbon steel can were monitored by mass spectrometry and Raman spectroscopy and were shown to be inconsequential; therefore, the dissolution of the LEU ingots has no significant impact on the generation of H 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Initial Neutronics Investigation of a Chlorine Salt-Based Breeder Blanket

Tritium breeding blankets within D-T-fueled fusion reactors contain lithium compounds and typically require neutron multiplier materials to achieve a tritium breeding ratio (TBR) consistent with self-sustaining operation. Liquid breeder blankets have some advantages over solid blankets, and previous blanket studies have investigated liquid metal as well as liquid salt–based blankets. Liquid salts have reduced magnetohydrodynamic effects as compared to liquid metals, but typically have a lower TBR. Recently, advanced fission reactor concepts have considered chloride-based salts in their design, and there is a significant amount of research work occurring to study these salts. Chloride salts have previously been considered for fusion reactors, but studies have typically found lower breeding ratios than for fluoride salts, such as 2(LiF)-BeF 2 (flibe) so they have not been further developed. In this work, we use a one-dimensional cylindrical radiation transport model of a conceptual tokamak fusion reactor to investigate the neutronics feasibility of using a chloride salt–based blanket that uses chlorine enriched in 37 Cl, which has both a low capture cross section and a substantial (n,2n) cross section. It is found that chloride salts (LiCl mixed with BeCl 2 and/or PbCl 2 ) can potentially achieve a ~3% to 5% higher TBR than fluoride molten salts, notably flibe, in the absence of a solid multiplier. Including a solid multiplier, however, does narrow this advantage, with TBRs estimated within ~1% of flibe with a 2-cm Be multiplier. Chloride salts can also reach lower melting points than flibe, potentially improving the scope for the use of reduced activation ferritic-martensitic steel as a structural material. There is substantial uncertainty in the calculations driven by limited thermochemical data for the Cl salts, plus cross-section uncertainties. The production of 36 Cl through 35 Cl(n,g) and 37 Cl(n,2n) has the potential to challenge the waste disposal rating of the blanket. Calculations indicate that, while this is not an immediate showstopper, this case depends upon the exact waste disposal rating criteria used for 36 Cl. Further work could reduce these uncertainties with improved thermochemical data, higher-fidelity modeling for downselected salts, and more refined waste disposal calculations and regulatory guidance. Lastly, it must be recognized that, as for all molten salts, corrosion and chemistry can present appreciable technical challenges that require further assessment in developing a practical blanket concept, and also that the enrichment of chlorine presents an additional technical and supply chain challenge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling Tritium Transport in PbLi Breeder Blankets Under Steady State

Tritium behavior in the breeder/coolant plays a crucial role in keeping the tritium loss under an allowable limit and realizing high tritium recovery efficiency. In this paper, progress toward the development of a comprehensive 3D predictive capability is discussed and presented. The sequence of transport processes leading to tritium release includes diffusion and convection through the PbLi, transfer across the liquid/solid interface, diffusion of atomic tritium through the structure, and dissolution-recombination at the solid/gas interface. Numerical simulation of the coupled individual physics phenomena of tritium transport is performed for DCLL/HCLL type breeder blankets under realistic reactor-like conditions in this paper. Tritium concentration and permeation are presented and the MHD effects are evaluated. Preliminary results shows that the MHD velocity profile has the significant effect in preventing tritium permeation due to the higher convection effects near the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Special Analysis for the Disposal of the Idaho National Laboratory Unirradiated Light Water Breeder Reactor Rods and Pellets Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

The purpose of this special analysis (SA) is to determine if the Idaho National Laboratory (INL) Unirradiated Light Water Breeder Reactor (LWBR) Rods and Pellets waste stream (INEL103597TR2, Revision 2) is suitable for disposal by shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS). The INL Unirradiated LWBR Rods and Pellets waste stream consists of 24 containers with unirradiated fabricated rods and pellets composed of uranium oxide (UO2) and thorium oxide (ThO2) fuel in zirconium cladding. The INL Unirradiated LWBR Rods and Pellets waste stream requires an SA because the 229 Th, 230 Th, 232 U, 233 U, and 234 U activity concentrations exceed the Nevada National Security Site (NNSS) Waste Acceptance Criteria (WAC) Action Levels.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Special Analysis for the Disposal of the INL Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) Waste Stream at the Area 5 Radioactive Waste Management Site

This special analysis (SA) evaluates whether the Idaho National Laboratory (INL) Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) waste stream (INEL167203QR1, Revision 0) is suitable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS). Disposal of the INL Waste Associated with the Unirradiated LWBR waste meets all U.S. Department of Energy (DOE) Manual DOE M 435.1-1, “Radioactive Waste Management Manual,” Chapter IV, Section P performance objectives (DOE 1999). The INL Waste Associated with the Unirradiated LWBR waste stream is recommended for acceptance with the condition that the total uranium-233 ( 23 3U) inventory be limited to 2.7E13 Bq (7.2E2 Ci).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DIissolution of low enriched uranium from the experimental breeder reactor-II fuel stored at the Idaho National Laboratory

The Idaho National Laboratory (INL) is actively engaged in the development of electrochemical processing technology for the treatment of fast reactor fuels using irradiated fuel from the Experimental Breeder Reactor-II (EBR-II) as the primary test material. The research and development (R&D) activities generate a low enriched uranium (LEU) metal product from the electrorefining of the EBR-II fuel and the subsequent consolidation and removal of chloride salts by the cathode processor. The LEU metal ingots from past R&D activities are currently stored at INL awaiting disposition. One potential disposition pathway is the shipment of the ingots to the Savannah River Site (SRS) for dissolution in H-Canyon. Carbon steel cans containing the LEU metal would be loaded into reusable charging bundles in the H-Canyon Crane Maintenance Area and charged to the 6.4D or 6.1D dissolver. The LEU dissolution would be accomplished as the final charge in a dissolver batch (following the dissolution of multiple charges of spent nuclear fuel (SNF)). The solution would then be purified and the 235 U enrichment downblended to allow use of the U in commercial reactor fuel. To support this potential disposition path, the Savannah River National Laboratory (SRNL) developed a dissolution flowsheet for the LEU using samples of the material received from INL.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Feasibility of processing the experimental breeder reactor-II driver fuel from the Idaho National Laboratory through Savannah River Site's H-Canyon facility

Savannah River National Laboratory (SRNL) was requested to evaluate the potential to receive and process the Idaho National Laboratory (INL) uranium (U) recovered from the Experimental Breeder Reactor II (EBR-II) driver fuel through the Savannah River Site’s (SRS) H-Canyon as a way to disposition the material. INL recovers the uranium from the sodium bonded metallic fuel irradiated in the EBR-II reactor using an electrorefining process. There were two compositions of EBR-II driver fuel. The early generation fuel was U-5Fs, which consisted of 95% U metal alloyed with 5% noble metal elements “fissium” (2.5% molybdenum, 2.0% ruthenium, 0.3% rhodium, 0.1% palladium, and 0.1% zirconium), while the later generation was U-10Zr which was 90% U metal alloyed with 10% zirconium. A potential concern during the H-Canyon nitric acid dissolution process of the U metal containing zirconium (Zr) is the explosive behavior that has been reported for alloys of these materials. For this reason, this evaluation was focused on the ability to process the lower Zr content materials, the U-5Fs material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Unreviewed Disposal Evaluation Question: Disposal of the Idaho National Laboratory Waste Associated with the Unirradiated Light Water Breeder Reactor at the Area 5 Radioactive Waste Management Site

This Unreviewed Disposal Question Evaluation (UDQE) assesses whether the Idaho National Laboratory (INL) Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) waste stream (INL167203QR1, Revision 1 [INL 2017]) is suitable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Special Analysis for the Disposal of the Idaho National Laboratory Unirradiated Light Water Breeder Reactor UO 2 /ThO 2 and UO 2 /ZrO 2 Rods and Pellets Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

This special analysis (SA) evaluates whether the Idaho National Laboratory (INL) Unirradiated Light Water Breeder Reactor (LWBR) UO 2 /ThO 2 and UO 2 /ZrO 2 Rods and Pellets waste stream is suitable for disposal by shallow land burial at the Area 5 Radioactive Waste Management Site on the Nevada National Security Site (NNSS). The INL Unirradiated LWBR Rods and Pellets waste stream consists of unirradiated uranium-233 ( 233 U) fuel rods. The INL Unirradiated LWBR Rods and Pellets waste stream requires an SA to resolve whether it is acceptable to dispose of 233 U, 232 U, 234 U, thorium-229 ( 229 Th), and 230 Th at activity concentrations exceeding their NNSS Waste Acceptance Criteria Action Levels.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrodeposition method development for Californium Rare Isotope Breeder Upgrade (CARIBU) Source

Electrodeposition is one of the most widely utilized techniques for thin-film production with high yields. Although it is used extensively, this technique still presents several issues limiting its usefulness, including excess thickness and frequent cracking of deposited films. Efforts to improve thin-film production recently undertaken at Oak Ridge Laboratory by the authors have included studying operating conditions and applied electrolytes. Samarium was used as a surrogate material for californium, and yield was compared with different deposition condition. The final procedure from the optimized condition will be applied during production of the californium-252 source for the Californium Rare Isotope Breeder Upgrade (CARIBU) project, and the fission fragment will be analyzed.

07 ISOTOPE AND RADIATION SOURCES↗