Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BNL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Double Quarter Wave Crab Cavity Wire Stretching Measurement at BNL

The Double Quarter Wave (DQW) crab cavity is one out of the two crab cavities within Work Package 4 of the LHC (Large Hadron Collider) Hi-Lumi Program, and the RF design of the cavity was originally supported by the US LHC Accelerator Research Program (LARP) and later the LHC Accelerator Upgrade Program (AUP) funded by the DOE High Energy Physics Office in the Office of Science. Brookhaven National Laboratory (BNL) has delivered the successful DQW crab cavity RF design, and worked actively with all. The wire stretching measurement was completed on the prototype DQW crab cavity for operation practice and calibration of the measurement system. Four locations were defined to be on the electrical center plane of the crab cavity, and survey of the wire indicated all are on the same plane. The successful measurement validated the wire stretching system built at Brookhaven National Lab. The offset of the four wire locations to the fitted plane provided the error of the measurement.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Proceedings of RIKEN BNL Research Center Workshop: Small-x Physics in the EIC Era [Slides]

Understanding the high energy limit of hadronic and nuclear collisions is at the forefront of nuclear and particle physics. When boosted to ultrahigh energies, all hadrons and nuclei eventually transform into a universal form of matter called the Color Glass Condensate (CGC). The CGC is characterized by the high density (saturation) of small-x gluons which leads to distinct experimental signatures. Tantalizing hints of the CGC have been observed at HERA, RHIC and the LHC, but the prospects for the discovery of the CGC are more promising at future experiments such as the Electron-Ion Collider (EIC) at BNL Indeed, according to the National Science Academy report published in 2019, one of the three major goals of the EIC is to address the nature of the gluon saturation. (The other two are the mass and spin structure of the nucleons.) With this in mind, the small-x community is gearing up to meet the challenges of the EIC era. Over the past several years, there has been impressive progress in the next-to-leading order (NLO) calculations in the CGC framework of various observables such as single hadron production in proton-nucleus collisions, inclusive and exclusive dijet and trijet production in Deep Inelastic Scattering (DIS), jet-plus-photon production in DIS, etc. We expect that NLO calculations will be the standard tool to confront future experimental data at the EIC. Another emerging trend of the community is the interplay between small-x physics and spin physics. The RHIC result for the gluon helicity ΔG has underscored the necessity to understand the longitudinal spin structure of the proton at small-x. There have been theoretical indications that a significant fraction of spin and orbital angular momentum is stored in the small-x region. As for the transversely polarized proton, a surprising new connection between the gluon Sivers function at small-x and the QCD Odderon has been pointed out and its implications at the EIC has been discussed. In view of these developments, we think it is timely to organize a dedicated workshop on small-x physics to summarize the present status of the field and to discuss future directions. A major focus of this workshop will be to identify outstanding problems that could significantly benefit from collaborative efforts amongst scientists working on formal, phenomenological, and computational aspects of small-x physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

NCSP Activities at BNL (FY21) [Slides]

All 3 BNL NCSP (ND, AM, TS) tasks are reported as being on time and slightly under budget. Several COVID-19 related impacts are noted. The release of ENDF/B-VIII.1 has been delayed for 1 year to Feb 2024. New ENDF Library Manager appointment announced as Gustavo Nobre.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Neutron spectral measurements at the BNL NSLS-II synchrotron facility

During the first week of August 2022, Tim Gildea of Los Alamos National Laboratory’s (LANL) RP-SVS group performed a series of neutron spectral measurements at the National Synchrotron Light Source II (NSLS-II) 3GeV facility located at Brookhaven National Lab (BNL)1 . These measurements were conducted under Memorandum Purchase Order (MPO) 413911 with the objective of gaining an accurate understanding of the photoneutron fields generated under normal and selected fault conditions. The spectral data collected during the course of the study was analyzed at LANL and the results form the basis of this report.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

BNL NCSP Succession Planning Efforts in FY 2020

This document fulfills a technical support element milestone (TS6:Q4) given in the Five-Year Plan. This document describes BNL succession planning efforts in FY-2020 for the Nuclear Data task area.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2026

Technical Report for Bayesian Optimization and Reinforcement Learning for Beam Polarization Increase in the BNL Hadron Injectors

This project developed and evaluated physics-informed Bayesian learning and machine learning (ML)-based optimization methods for improving beam polarization preservation in the BNL hadron injector chain. The work focused on uncertainty-aware digital twin modeling, Bayesian calibration of accelerator simulations using beam measurements, and data-efficient optimization strategies including Bayesian optimization and reinforcement learning. These methods were applied to injector tuning and RF control problems in realistic accelerator settings to support improved operational robustness and readiness for RHIC operations and future Electron–Ion Collider facilities. No subject inventions were disclosed under this award.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Target and orbit feedback simulations of a muSR beamline at BNL

Well-polarized positive surface muons are a tool to measure the magnetic properties of materials since the precession rate of the spin can be determined from the observation of the positron directions when the muons decay. The use of the AGS complex at BNL has been explored for a muSR facility previously. Here we report simulations of a beamline with a target inside a solenoidal field, and of an orbit feed-back system with single muon beam positioning monitors based on technology available today

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Multipacting-free quarter-wavelength choke joint design for BNL SRF

The BNL SRF gun cavity operated well in CW mode up to 2 MV. However, its performance suffered due to multipacting in the quarter-wavelength choke joint. A new multipacting-free cathode stalk was designed and conditioned. This paper describes RF and thermal design of the new cathode stalk and its conditioning results.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

BNL 56 MHz HOM Damper Prototype Fabrication at JLab

A prototype Higher-Order Mode (HOM) Damper was fabricated at JLab for the Relativistic Heavy-Ion Collider's (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL). Primarily constructed from high RRR Niobium and Sapphire, the coaxial damper presented significant challenges in electron-beam welding (EBW), brazing and machining via acid etching. The results of the prototype operation brought about changes in the damper design, due to overheating braze alloys and possible multi-pacting. Five production HOM dampers are currently being fabricated at JLab. This paper outlines the challenges faced in the fabrication process, and the solutions put in place.

36 MATERIALS SCIENCE↗
DOE OSTI2015

BNL 56 MHz HOM damper prototype fabrication at JLAB

A prototype Higher-Order Mode (HOM) Damper was fabricated at JLab for the Relativistic Heavy-Ion Collider’s (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL). Primarily constructed from high RRR Niobium and Sapphire, the coaxial damper presented significant challenges in electron-beam welding (EBW), brazing and machining via acid etching. The results of the prototype operation brought about changes in the damper design, due to overheating braze alloys and possible multi-pacting. Five production HOM dampers are currently being fabricated at JLab. This paper outlines the challenges faced in the fabrication process, and the solutions put in place.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Characterization of BNL and HPK AC-LGAD sensors with a 120 GeV proton beam

We present measurements of AC-LGADs performed at the Fermilab's test beam facility using 120 GeV protons. We studied the performance of various strip and pad AC-LGAD sensors that were produced by BNL and HPK. The measurements are performed with our upgraded test beam setup that utilizes a high precision telescope tracker, and a simultaneous readout of up to 7 channels per sensor, which allows detailed studies of signal sharing characteristics. These measurements allow us to assess the differences in designs between different manufacturers, and optimize them based on experimental performance. We then study several reconstruction algorithms to optimize position and time resolutions that utilize the signal sharing properties of each sensor. We present a world's first demonstration of silicon sensors in a test beam that simultaneously achieve better than 6-10 micron position and 30 ps time resolution. This represents a substantial improvement to the spatial resolution than would be obtained with binary readout of sensors with similar pitch.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Understanding baryon stopping at the BNL Relativistic Heavy Ion Collider top energies

The nucleon exhibits a rich internal structure governed by quantum chromodynamics (QCD), where its electric charge arises from valence quarks, while its spin and mass emerge from complex interactions among valence quarks, sea (anti)quarks, and gluons. At the advent of QCD, an alternative hypothesis emerged suggesting, at high energies, the transport of a nucleon's baryon number could be traced by a nonperturbative configuration of gluon fields connecting its three valence quarks, forming a 𝑌-shaped topology known as the gluon junction. Recent measurements by the STAR experiment are compatible with this scenario. In light of these measurements, this study aims to explore the mechanisms of baryon transport in high-energy nuclear collisions using the pythia-8 framework, which incorporates a state-of-the-art hadronization model with advanced color flow (CF) and color reconnection (CR) mechanisms that mimic signatures of a baryon junction. Within this model setup, we investigate (i) the rapidity slope of the net-baryon distributions in photon-included processes (𝛾 + 𝑝) and (ii) baryon over charge transport in the isobaric (Ru + Ru and Zr + Zr) collisions. Our study highlights the importance of the CF and CR mechanisms in pythia-8, which play a crucial role in baryon transport. The results show that the CF and CR schemes significantly affect the isobaric baryon-to-charge ratio, leading to different predictions for baryon stopping and underscoring the need to account for CF and CR effects in comparisons with experimental measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Design of MARCO, the New Solenoidal Detector Magnet for the ePIC Experiment at BNL

MARCO is the new superconducting solenoid for ePIC, the general-purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider at Brookhaven National Laboratory. Here, this 3.84 m long solenoid, with a bore diameter of 2.84 m, will provide a magnetic field of 2.0 T at the center with a nominal current of 4 kA at 4.5 K, for a total stored energy of 45 MJ. Its conductor is a NbTi Rutherford in Copper Channel (RICC), specially designed to stand the high mechanical loads induced by the magnetic field. Its copper stabilizer will assure the protection in case of quench. The coils are wound into six layers inside a thin external mandrel in brass, with a triple role of mechanical reinforcement, cryogenic support for the thermosiphon circuit and quench-back propagator. With a cold mass average radial thickness of just 7 cm, the magnet fulfills all the criterions of transparency for the particles directed to the hadronic calorimeter forecast around the cryostat. In this paper, the design of MARCO is presented, with a specific focus on the magnetic and quench analysis.

Calvelli, Valerio [Commissariat a l'Energie Atomiq↗
DOE OSTI2026

Neutrino oscillation prospects with a dual-baseline beam from BNL to SNOLAB and SURF

The Electron-Ion Collider (EIC) is a next-generation accelerator primarily designed to study the internal structure of nucleons through high-precision electron-hadron collisions. In this work, we explore the feasibility of employing a 1 MW fraction of the EIC proton beam to generate a high-intensity GeV-scale neutrino beam for long-baseline oscillation studies. We have simulated proton-target interactions and optimize the resulting neutrino fluxes for water-based liquid scintillator (WbLS) detectors located at distinct baselines of 900 km and at 2900 km. Oscillation analyses performed with GLoBES show that extended baselines allow access to multiple oscillation maxima, significantly enhancing sensitivity to leptonic CP violation. The study also examines the interplay between matter effects and the intrinsic CP violating phase in shaping observable asymmetries. We note that simplified systematics and no backgrounds are used in this analysis to establish the baseline physics potential. These results suggest that the EIC proton beam could provide a novel and complementary source for precision neutrino physics, extending the scientific reach of the EIC program.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

A hollow cathode ion source for production of primary ions for the BNL electron beam ion source

A hollow cathode ion source, based on one developed at Saclay, has been modified significantly and used for several years to produce all primary 1+ ions injected into the Relativistic Heavy Ion Collider Electron Beam Ion Source (EBIS) at Brookhaven. Currents of tens to hundreds of microamperes have been produced for 1+ ions of He, C, O, Ne, Si, Ar, Ti, Fe, Cu, Kr, Xe, Ta, Au, and U. The source is very simple, relying on a glow discharge using a noble gas, between anode and a solid cathode containing the desired species. Ions of both the working gas and ionized sputtered cathode material are extracted, and then the desired species is selected using an ExB filter before being transported into the EBIS trap for charge breeding. The source operates pulsed with long life and excellent stability for most species. Reliable ignition of the discharge at low gas pressure is facilitated by the use of capacitive coupling from a simple toy plasma globe. The source design, and operating experience for the various species, is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Realizing the scientific program with polarized ion beams at the future BNL Electron Ion Collider

Polarized ion beams at the Electron Ion Collider (EIC) are essential to address some of the most important open questions at the twenty-first century frontiers of understanding of the fundamental structure of matter. Here, in this work, we summarize the science case and identify polarized 2 H, 3 He, 6 Li, and 7 Li ion beams as critical technology that will enable experiments which address the most important science. Furthermore, we discuss the required ion polarimetry and spin manipulation at the EIC. The current EIC accelerator design is presented. We identify a significant research and development effort across national and international laboratories and universities that is required over about a decade to realize the polarized ion beams and estimate (based on previous experience) that it will require about 20 full-time equivalent (FTE) over 10 years (or a total of about 200 FTE-years) of personnel, including graduate students, postdoctoral researchers, technicians, and engineers. Attracting, educating, and training a new generation of physicists in experimental spin techniques will be essential for the successful realization. Artificial intelligence and machine learning are seen as having significant potential for both acceleration of research and development and amplification of discovery in the optimal realization of this unique quantum technology on a cutting-edge collider. The research and development effort is synergistic with research in atomic physics and fusion energy science.

43 PARTICLE ACCELERATORS↗