Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Air Class E”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Above the Energy Gap Law: Heavy Chalcogenide Substitution in NIR II-Emissive Diradicaloid Qubits

Near-infrared (NIR, 700–1700 nm)- and telecom (∼1260–1625 nm)-emissive molecules are good candidates for biological imaging and quantum sensing applications, respectively; however, bright low energy emission is rare due to exponentially increasing nonradiative decay rates in these regions, a phenomenon known as the energy gap law. Recent literature has emphasized the importance of minimizing skeletal modes to prevent increased nonradiative decay rates, but most organic lumiphores in these regions utilize large, conjugated scaffolds containing many C═C modes. Here we report a compact, telecom-emissive scaffold, tetrathiafulvalene-2,3,6,7-tetraselenate, or TTFts, that displays remarkable air, water, and acid stability, exhibits record quantum yields and brightness values, and retains quantum coherence under ambient conditions. These properties are enabled through methodical selenium substitution, which bathochromically shifts emission while shifting skeletal vibrations to lower energies. This new scaffold validates heavy heteroatom substitution strategies and establishes a new class of bright telecom emitters and robust qubits.

biological imaging↗
NASA NTRSDate not supplied

Corridor Design and Analysis for UAM Operations

The Urban Air Mobility (UAM) concept is a part of Advanced Air Mobility (AAM), a joint initiative between the Federal Aviation Administration (FAA), NASA, and industry to develop an air transportation system that uses new electric (i.e., green) air vehicles in geographical areas previously underserved by traditional aviation. Market forecast studies predict that there will be demand for alternate modes of air transportation using electric Vertical Take-off and Landing aircraft. UAM expands transportation networks by introducing short flights to move people and goods around metropolitan areas​. UAM is expected to improve mobility for the public, decongest road traffic, reduce trip time, and decrease strain on existing public transportation networks. Various challenges exist to make the introduction of UAM operations successful in the U.S. National Airspace System (NAS). These include but are not limited to integration with existing airports and airspace, provision of air traffic services (e.g., separation), vehicle design and certification, and community acceptance. The focus of this paper is on integration of UAM operations into the NAS via introduction of new airspace structures. UAM will operate within a regulatory, operational, and technical environment that is incorporated into the NAS​. As per the UAM Concept of Operations (ConOps), the FAA retains regulatory authority and is responsible for establishing operational parameters and maintaining oversight. The FAA’s UAM ConOps describes flights at low altitudes (below 5,000 ft) with minimal disruption to established conventional aircraft traffic and limited voice interactions with the Air Traffic Control (ATC). Early stages of UAM may use existing procedures to safely integrate UAM with conventional flights. This would involve flying under Part 91 Visual Flight Rules (VFR) and using voice for communications. The initial UAM ecosystem will utilize the current infrastructure such as routes, helipads, and ATC services, where practicable. ​A NASA study explored the use of existing helicopter routes in Dallas Fort Worth (DFW) airspace for initial UAM operations with a Letter of Agreement (LOA) that included procedures to request a Class B (controlled airspace) clearance. The research showed that the chosen approach was feasible for near-term, low-demand UAM traffic, but was not scalable. The growth of operations in today’s aviation system has resulted in airspace reorganization and procedures to ensure safety and efficiency as traffic rates increase. One proposed operating innovation that can help with the scalability of UAM is establishing routes and corridors. This may look similar to the Area Navigation (RNAV) procedures used today to streamline operations into busy airports. However, instead of FAA automation systems and ATC managing the flow of traffic, some UAM concepts envision a third-party service provider performing this role as part of the Provider of Services for UAM (PSU) network. The FAA’s UAM ConOps posits that new airspace structures such as UAM corridors include the following design criteria: 1) Minimal impact on existing NAS operations, 2) no or minimal additional ATC services, 3) public interest considerations such as noise, safety, and security, and 4) customer needs. The airspace available in urban environments is limited by the height of buildings, the effect of weather including wind gusts, privacy needs, and a clearance envelope. The new airspace structure would need to be designed around large airports and urban areas where the initial market demand is likely to exist. NASA has started evaluating airspace in the Dallas Fort Worth area to design new airspace structures, keeping the first two design criteria in mind. It is assumed that there will be an on-board pilot-in-command, and the flights will operate under VFR in Visual Meteorological Conditions. Corridors will be required in controlled airspace, whereas UAM operations can fly in uncontrolled Class G and E airspace using current day rules. Keeler et. al identified factors and heuristics for development of routes for UAM operations for integration with airspace close to large airports such as Dallas Fort Worth and Dallas Love Field. This paper describes the heuristics applied to define the corridors, analyzes them with respect to legacy traffic and presents key results.

Urban Air Mobility↗
NASA NTRS2001

New Concepts and Perspectives on Micro-Rotorcraft and Small Autonomous Rotary-Wing Vehicles

A key part of the strategic vision for rotorcraft research as identified by senior technologists within the Army/NASA Rotorcraft Division at NASA Ames Research Center is the development and use of small autonomous rotorcraft. Small autonomous rotorcraft are defined for the purposes of this paper to be a class of vehicles that range in size from rotary-wing micro air vehicles (MAVs) to larger, more conventionally sized, rotorcraft uninhabited aerial vehicles (UAVs) - i.e. vehicle gross weights ranging from hundreds of grams to thousands of kilograms. The development of small autonomous rotorcraft represents both a technology challenge and a potential new vehicle class that will have substantial societal impact for: national security, personal transport, planetary science, and public service.

Young, Larry A.↗
NASA NTRSDate not supplied

Define Minimum Safe Operational Volume for Aerial Vehicles in Upper Class E Airspace

The variety of vehicle performance in upper Class E airspace requires a method that can efficiently compute the minimum safe operational boundary between aircraft. This work presents a mathematical method to define the minimum safe operational boundary needed for aerial vehicles operating in upper Class E airspace. This method focuses on the extra separation required by vehicle maneuverability, communication delay, and control/operator response time. A sensitivity study is then performed to provide a general understanding of the impact of these factors on the extra separation needed. Experiments with pairwise encounters are conducted to verify the results generated by the proposed methods.

Separation↗
NASA NTRS1985

An investigation into the vertical axis control power requirements for landing VTOL type aircraft onboard nonaviation ships in various sea states

The problem of determining the vertical axis control requirements for landing a VTOL aircraft on a moving ship deck in various sea states is examined. Both a fixed-base piloted simulation and a nonpiloted simulation were used to determine the landing performance as influenced by thrust-to-weight ratio, vertical damping, and engine lags. The piloted simulation was run using a fixed-based simulator at Ames Research center. Simplified versions of an existing AV-8A Harrier model and an existing head-up display format were used. The ship model used was that of a DD963 class destroyer. Simplified linear models of the pilot, aircraft, ship motion, and ship air-wake turbulence were developed for the nonpiloted simulation. A unique aspect of the nonpiloted simulation was the development of a model of the piloting strategy used for shipboard landing. This model was refined during the piloted simulation until it provided a reasonably good representation of observed pilot behavior.

Stevens, M. E.↗
NASA NTRS1975

Evaluation of class 2 biological cabinets

Basic investigations, consisting primarily of airflow measurements and visual smoke tests, were made on four commercially available units. The results indicated that performance varied considerably between units. Therefore, it was decided to outline the performance desired and to include in the overall equipment specifications a set of performance tests to assure a clean air safety cabinet with respect to chemical usage. The evaluation was to be based on aerodynamic performance under the various modes of operation.

Chamberlin, R. E.↗
NASA NTRS1998

Parallel Three-Dimensional Computation of Fluid Dynamics and Fluid-Structure Interactions of Ram-Air Parachutes

This is a final report as far as our work at University of Minnesota is concerned. The report describes our research progress and accomplishments in development of high performance computing methods and tools for 3D finite element computation of aerodynamic characteristics and fluid-structure interactions (FSI) arising in airdrop systems, namely ram-air parachutes and round parachutes. This class of simulations involves complex geometries, flexible structural components, deforming fluid domains, and unsteady flow patterns. The key components of our simulation toolkit are a stabilized finite element flow solver, a nonlinear structural dynamics solver, an automatic mesh moving scheme, and an interface between the fluid and structural solvers; all of these have been developed within a parallel message-passing paradigm.

Tezduyar, Tayfun E.↗
NASA NTRS1990

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 2: User's manual (version 3.0)

A comprehensive description of user problem definition for the PAN AIR (Panel Aerodynamics) system is given. PAN AIR solves the 3-D linear integral equations of subsonic and supersonic flow. Influence coefficient methods are used which employ source and doublet panels as boundary surfaces. Both analysis and design boundary conditions can be used. This User's Manual describes the information needed to use the PAN AIR system. The structure and organization of PAN AIR are described, including the job control and module execution control languages for execution of the program system. The engineering input data are described, including the mathematical and physical modeling requirements. Version 3.0 strictly applies only to PAN AIR version 3.0. The major revisions include: (1) inputs and guidelines for the new FDP module (which calculates streamlines and offbody points); (2) nine new class 1 and class 2 boundary conditions to cover commonly used modeling practices, in particular the vorticity matching Kutta condition; (3) use of the CRAY solid state Storage Device (SSD); and (4) incorporation of errata and typo's together with additional explanation and guidelines.

Sidwell, Kenneth W.↗
NASA NTRS2015

Characteristics of a Well Clear Definition and Alerting Criteria for Encounters Between UAS and Manned Aircraft in Class E Airspace

Unmanned aircraft systems (UAS) will be required to equip with a detect-and-avoid (DAA) system in order to satisfy the federal aviation regulations to remain well clear of other aircraft. For a DAA system to satisfy the requirement to stay well clear of other airborne traffic, a quantitative definition of well clear needs to be defined and evaluated. This study investigates the implications of UAS using proposed well clear definitions as a separation standard for conducting operations in the National Airspace System (NAS). The first analysis considers three well clear definitions and presents the relative state conditions of intruder aircraft as they encroach upon the well clear boundary. The second analysis focuses on the definition of the alerting criteria needed to inform the UAS operator of a potential loss of well clear. All analyses are conducted in a NAS-wide fast-time simulation environment using UAS aircraft models, proposed UAS missions, and historical air defense radar data to populate the background traffic operating under visual flight rules. The results presented in this study inform the safety case, requirements development, and the operational environment for DAA minimum operational performance standards.

Safety↗
NASA NTRS1975

ERTS applications in state land use planning

The progress made and limitations encountered in using ERTS-1 data for resource management in Ohio is surveyed. Photo-opto-electronic techniques were used with special facility equipment and resolution to 10-30 meters was required to determine strip mine features. Lake Erie's sediment patterns were detected along with flooding conditions, large scale vegetative damage caused by toxic air pollutants was identified, Ohio land use categories were tabulated and thematic map containing forested areas was derived. The experimental findings regarding utility/relevance assessment were ranked in 4 classes for all the applications involved. Preliminary recommendations for operational satellite earth resources survey data requirements are presented and data analysis and product dissemination are proposed to be centralized in conjunction with thermal IR data and an increased resolution.

Pincura, P. G.↗
NASA NTRS1980

Performance and human factors results from thrust vectoring investigations in simulated air combat

In support of research related to advanced fighter technology, the Langley Differential Maneuvering Simulator (DMS) has been used to investigate the effects of advanced aerodynamic concepts, parametric changes in performance parameters, and advanced flight control systems on the combat capability of fighter airplanes. At least five studies were related to thrust vectoring and/or inflight thrust reversing. The aircraft simulated ranged from F-4 class to F-15 class, and included the AV-8 Harrier. This paper presents an overview of these studies including the assumptions involved, trends of results, and human factors considerations that were found.

Pennington, J. E.↗
NASA NTRS1982

Analytical modeling of operating characteristics of premixing-prevaporizing fuel-air mixing passages. Volume 1: Analysis and results

A model for predicting the distribution of liquid fuel droplets and fuel vapor in premixing-prevaporizing fuel-air mixing passages of the direct injection type is reported. This model consists of three computer programs; a calculation of the two dimensional or axisymmetric air flow field neglecting the effects of fuel; a calculation of the three dimensional fuel droplet trajectories and evaporation rates in a known, moving air flow; a calculation of fuel vapor diffusing into a moving three dimensional air flow with source terms dependent on the droplet evaporation rates. The fuel droplets are treated as individual particle classes each satisfying Newton's law, a heat transfer, and a mass transfer equation. This fuel droplet model treats multicomponent fuels and incorporates the physics required for the treatment of elastic droplet collisions, droplet shattering, droplet coalescence and droplet wall interactions. The vapor diffusion calculation treats three dimensional, gas phase, turbulent diffusion processes. The analysis includes a model for the autoignition of the fuel air mixture based upon the rate of formation of an important intermediate chemical species during the preignition period.

Anderson, O. L.↗
DOE OSTI2024

Remote Sensing and GIS data at 1km-grid over Chesapeake Bay used in “He et al. 2024, Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem”

The package contains the data layers used in “He et al. 2024, Effects of spatial variability in vegetation phenology, climate, landcover, biodiversity, topography, and soil property on soil respiration across a coastal ecosystem”. The study aims to use multi-source remote sensing and GIS datasets to investigate the spatial heterogeneity and identify spatial zones with similar environmental characteristics and understand the primary driving factors affecting soil respiration within sub-ecosystems of the coastal ecosystem. We employed unsupervised hierarchical clustering analysis to identify spatial regions with distinct environmental characteristics, then determined the main driving factors using Random Forest regression and SHapley Additive exPlanations (SHAP). Spatial data layers include soil respiration, kernel Normalized Difference Vegetation Index (kNDVI) computed from Harmonized Landsat 8 and Sentinel-2 time series, climate variables from the Daymet dataset, land cover, biodiversity, topographical metrics, soil property, and tidal elevation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Updating the Default Anaerobic Digester Technology for Wastewater Sludge Anaerobic Digestion Pathways in R&D GREET 2025 Rev.1

The Greenhouse Gases, Regulated Emissions and Energy Use in Technologies model (R&D GREET) evaluates the life cycle impacts of renewable fuels and materials, including renewable natural gas (RNG) produced from wastewater (WW) sludge. In the sludge-to-RNG pathway, the assumed anaerobic digestion (AD) technology impacts results, such as energy use, greenhouse gases (GHG), and air pollutant emissions. Prior versions assumed sludge was fed through a thermal hydrolysis stage preceding the mesophilic AD (Thermohydrolysis). Such a process is expected to yield biosolids with sufficiently reduced pathogens to qualify for U.S Environmental Protection Agency (EPA) Class A designation. Other technologies, such as mesophilic AD without any advanced pretreatments, typically produce lower quality Class B biosolids but requires a lower energy burden and infrastructure investment. Table 1 displays the available AD technologies and the assumed resulting EPA biosolids class type from each technology. Full descriptions of each technology and their performance differences can be found in previous work.

09 BIOMASS FUELS↗
NASA NTRS2000

Marquardt's Mach 4.5 Supercharged Ejector Ramjet (SERJ) High-Performance Aircraft Engine Project: Unfulfilled Aspirations Ca.1970

The Supercharged Ejector Ramjet (SERJ) engine developments of the 1960s, as pursued by The Marquardt Corporation and its associated industry team members, are described. In just three years, engineering work on this combined-cycle powerplant type evolved, from its initial NASA-sponsored reusable space transportation system study status, into a U.S. Air Force/Navy-supported exploratory development program as a candidate 4.5 high-performance military aircraft engine. Bridging a productive transition from the spaceflight to the aviation arena, this case history supports the expectation that fully-integrated airbreathing/rocket propulsion systems hold high promise toward meeting the demanding propulsion requirements of tomorrow's aircraft-like Spaceliner class transportation systems. Lessons to be learned from this "SERJ Story" are offered for consideration by today's advanced space transportation and combined-cycle propulsion researchers and forward-planning communities.

Escher, William J. D.↗
DOE OSTI2021

Potent Antiviral Activity against HSV-1 and SARS-CoV-2 by Antimicrobial Peptoids

Viral infections, such as those caused by Herpes Simplex Virus-1 (HSV-1) and SARS-CoV-2, affect millions of people each year. However, there are few antiviral drugs that can effectively treat these infections. The standard approach in the development of antiviral drugs involves the identification of a unique viral target, followed by the design of an agent that addresses that target. Antimicrobial peptides (AMPs) represent a novel source of potential antiviral drugs. AMPs have been shown to inactivate numerous different enveloped viruses through the disruption of their viral envelopes. However, the clinical development of AMPs as antimicrobial therapeutics has been hampered by a number of factors, especially their enzymatically labile structure as peptides. We have examined the antiviral potential of peptoid mimics of AMPs (sequence-specific N-substituted glycine oligomers). These peptoids have the distinct advantage of being insensitive to proteases, and also exhibit increased bioavailability and stability. Our results demonstrate that several peptoids exhibit potent in vitro antiviral activity against both HSV-1 and SARS-CoV-2 when incubated prior to infection. In other words, they have a direct effect on the viral structure, which appears to render the viral particles non-infective. Visualization by cryo-EM shows viral envelope disruption similar to what has been observed with AMP activity against other viruses. Furthermore, we observed no cytotoxicity against primary cultures of oral epithelial cells. These results suggest a common or biomimetic mechanism, possibly due to the differences between the phospholipid head group makeup of viral envelopes and host cell membranes, thus underscoring the potential of this class of molecules as safe and effective broad-spectrum antiviral agents. We discuss how and why differing molecular features between 10 peptoid candidates may affect both antiviral activity and selectivity.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1996

The Oxidation and Protection of Gamma Titanium Aluminides

The excellent density-specific properties of the gamma class of titanium aluminides make them attractive for intermediate-temperature (600-850 C) aerospace applications. The oxidation and embrittlement resistance of these alloys is superior to that of the alpha(sub 2) and orthorhombic classes of titanium aluminides. However, since gamma alloys form an intermixed Al2O3/TiO2 scale in air rather than the desired continuous Al2O3 scale, oxidation resistance is inadequate at the high end of this temperature range (i.e., greater than 750-800 C). For applications at such temperatures, an oxidation-resistant coating will be needed; however, a major drawback of the oxidation-resistant coatings currently available is severe degradation in fatigue life by the coating. A new class of oxidation-resistant coatings based in the Ti-Al-Cr system offers the potential for improved fatigue life.

Brady, Michael P.↗
NASA NTRS2023

Closed Environment Air Revitalization System Based on Metal Organic Framework Adsorbents

This project utilized a systems engineering methodology to develop a vacuum swing adsorption system with full Labview automated control. The project was successful and provided students with an introduction to systems engineering and air revitalization. Specifically, two stainless steel adsorption beds were custom designed and manufactured and a sequence of computer controlled valves were used to deliver CO 2 laden, humid air, to the adsorbent where the CO 2 was removed from the air stream. Runs were completed using 13X zeolite and bed timing and switching was controlled by the computer based on the data output of a CO 2 detector. Adsorption runs using the MOF have not been completed upon the writing of this report; however, the MOF material is currently being synthesized and the runs will be completed upon receipt of the material. A follow up meeting with NASA has been tentatively planned to discuss the output of these experiments. Consistent with systems engineering practice, an end of project assessment of the class was conducted with the students and several items were realized. Specifically, the short period of performance of this grant makes it necessary to maintain a narrowly focused scope on the project such that multiple experiments after systems development (T&E) need to be limited to ensure timely completion of the proposed tasks. Also, procurement of parts may need to be moved forward in time to allow for delivery delays, and it may be necessary to request SDR, PDR, and CDR dates from NASA that are ahead of the NASA anticipated schedule. These types of lessons provided valuable to both the PI and the students and ultimately illustrate the necessity of proper systems engineering schedule risk assessment. The class met the objectives of the project and provided an introduction to systems engineering to undergraduate students. As a metric of that success, the lead engineer of the undergraduate design team acquired a job with an aerospace defense contractor, which he attributed to his knowledge of systems engineering concepts that were acquired via the X-Hab class.

T. Grant Glover↗