Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Adsorbent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Effect of adsorbed chlorine and oxygen on the shear strength of iron and copper junctions

Static-friction experiments were performed in ultrahigh vacuum at room temperature on copper, iron, and steel contacts selectively contaminated with oxygen and chlorine in submonolayer amounts. The concentration of the adsorbates was determined with Auger electron spectroscopy and was measured relative to the saturation concentration of oxygen on iron (concentration, 1.0). The coefficient of static friction decreased with increasing adsorbate concentration; however, it was independent of the type of metal and the adsorbate species. The results compared satisfactorily with an extension of the junction growth theory to heterogeneous interfaces. The reduction in interfacial shear strength was measured by the ratio of the shear strength of the interface with an adsorbate concentration of 1.0 and the strength of the clean metal interface. This ratio was about 0.835 for all the systems tested.

Wheeler, D. R.↗
NASA NTRS1978

Trace contaminant studies of HSC adsorbent

The adsorption and desorption of fifteen trace contaminants on HSC (polyethylenimine coated acrylic ester) adsorbent were experimentally investigated with the following two objectives: to test the removal potential and the adsorption reversibility of the selected trace contaminants, and to test the effect a preadsorbed trace contaminant has on the CO2 adsorption capacity. The experimental method for acquiring the adsorption equilibrium data used is based on the volumetric (or displacement) concept of vacuum adsorption. From the experimental results, it was found that the HSC adsorbent has good adsorption potential for contaminants of alcohol compounds, esters, and benzene compounds; whereas, adsorption of ketone compounds, oxidizing and reducing agents are detrimental to the adsorbent. In addition, all liquid contaminants reduce the CO2 capacity of HSC adsorbent.

Yieh, D. T. N.↗
NASA NTRS1983

Io's 4-micron band and the role of adsorbed SO2

The role of adsorbed SO2 on Io's surface particles in producing the observed spectral absorption band near 4 microns in Io's reflectance spectrum is explored. Calculations show that a modest 50 percent monolayer coating of adsorbed So2 molecules on submicron grains of sulfur or alkali sulfide, assumed to make up Io's uppermost optical surface ('radialith'), will result in a nu 1 + nu 3 absorption band near 4 microns with depth about 30 percent below the adjacent continuum, consistent with the observed strength of the Io band. The precise wavelength position of the nu 1 + nu 3 band of SO2 in different phase states such as frost, ice, adsorbate, and gas are summarized from the experimental literature and compared with the available telescopic measurements of the Io band position. The results suggest that the 4-micron band in Io's full disk spectrum can best be explained by the presence on Io's surface of widespread SO2 in the form of adsorbate rather than ice or frost.

Nash, D. B.↗
NASA NTRS1995

The Wide Field/Planetary Camera 2 (WFPC-2) molecular adsorber

A device has been developed at the Jet Propulsion Laboratory, California Institute of Technology, for the adsorption of contaminants inside a space instrument during flight. The molecular adsorber was developed for use on the Wide Field Planetary Camera 2, and it has been shown to perform at its design specifications in the WFPC-2. The basic principle of the molecular adsorber is a zeolite-coated ceramic honeycomb. The arrangement is efficient for adsorption and also provides the needed rigidity to retain the special zeolite coating during the launch vibrational environment. The adsorber, on other forms, is expected to be useful for all flight instruments sensitive to internal sources of contamination. Typically, some internal contamination is unavoidable. A common design solution is to increase the venting to the exterior. However, for truly sensitive instruments, the external contamination environment is more severe. The molecular adsorber acts as a one-way vent to solve this problem. Continued development is planned for this device.

Barengoltz, Jack↗
NASA NTRS1997

To-date spacecraft applications and demonstration testing results, and future product development for new molecular adsorber technologies

The use of molecular adsorbers, in order to aid in the reduction of the spacecraft contamination levels, is discussed. Molecular adsorbers are characterized by an extremely large surface area, molecularly-porous substructure, and processing charged sites capable of retaining molecular contaminant species. Molecular adsorbers were applied on two Hubble Space Telescope servicing missions, as well as on the tropical rainfall measuring mission. The use of molecular adsorbers carries the potential for low cost, easy fabrication and integration of reliable means for reducing the contamination level around spacecraft.

Thomson, Shaun↗
NASA NTRS1994

Adsorption and Desorption of Carbon Dioxide and Water Mixtures on Synthetic Hydrophobic Carbonaceous Adsorbents

Several synthetic carbonaceous adsorbents produced through pyrolysis of polymeric materials are available commercially. Some appear to have advantages over activated carbon for certain adsorption applications. In particular, they can have tailored hydrophobicities that are significantly greater than that of activated carbon, while moderately high surfaces areas are retained. These sorbents are being investigated for possible use in removing trace contaminants and excess carbon dioxide from air in closed habitats, plant growth chambers, and other applications involving purification of humid gas streams. We have analyzed the characteristics of a few of these adsorbents through adsorption and desorption experiments and standard characterization techniques. This paper presents pure and multicomponent adsorption data collected for carbon dioxide and water on two synthetic carbonaceous adsorbents having different hydrophobicities and capillary condensation characteristics. The observations are interpreted through consideration of the pore structure and surface chemistry of the solids and interactions between adsorbed carbon dioxide, water, and the solvent gas.

Finn, John E.↗
DOE OSTI2022

Selective, adsorbate-induced spin state changes in transition metal-based metal-organic frameworks

An adsorbate-selective metal organic framework includes a transition metal; and a plurality of organic molecules coordinated to the transition metal so as to preserve open coordination sites for selectively adsorbing molecules that have low-lying π* orbitals. The transition metal has a lowest energy spin state in the presence of the selectively adsorbed molecules that are strongly bonding to the transition metal through π-donating interactions which is different than the lowest energy spin state in the absence of these adsorbed molecules. The transition metal has also a lowest energy spin state in the presence of non-selected molecules that are weakly bonding to the transition metal through σ- and/or π-accepting and/or donating interactions.

Long, Jeffrey R.↗
DOE OSTI2023

Adsorbents, systems and methods for the removal of heavy metals from contaminated water

An adsorbent for a target compound can include porous carbon particles having pores with a predominant pore size less than 10 nm, and magnetic nanoparticles (MNP) nucleated on the carbon surface and within the pores of carbon particles to provide a carbon magnetic nanoparticle adsorbent (C-MNA). A method for removing target compounds with an adsorbent, a system for removing contaminants from a liquid, and a method for adsorbing target compounds from a fluid are also disclosed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Adsorbate-Induced Adatom Formation on Lithium, Iron, Cobalt, Ruthenium, and Rhenium Surfaces

Recent experimental and theoretical studies have demonstrated the reaction-driven metal–metal bond breaking in metal catalytic surfaces even under relatively mild conditions. Here, we construct a density functional theory (DFT) database for the adsorbate-induced adatom formation energy on the close-packed facets of three hexagonal close-packed metals (Co, Ru, and Re) and two body-centered cubic metals (Li and Fe), where the source of the ejected metal atom is either a step edge or a close-packed surface. For Co and Ru, we also considered their metastable face-centered cubic structures. We studied 18 different adsorbates relevant to catalytic processes and predicted noticeably easier adatom formation on Li and Fe compared to the other three metals. The NH 3 - and CO-induced adatom formation on Fe(110) is possible at room temperature, a result relevant to NH 3 synthesis and Fischer-Tropsch synthesis, respectively. There also exist other systems with favorable adsorbate effects for adatom formation relevant to catalytic processes at elevated temperatures (500–700 K). Our results offer insight into the reaction-driven formation of metal clusters, which could play the role of active sites in reactions catalyzed by Li, Fe, Co, Ru, and Re catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structure sensitivity in adsorbate-induced adatom formation on FCC transition-metal surfaces

Recent surface science discoveries reveal that adsorbates may induce in situ sub-nanometer cluster formation on transition-metal surfaces. To elucidate the structure sensitivity behind this phenomenon, we performed density functional theory calculations to construct an adatom formation energy database for eight fcc metals and 26 adsorbates commonly involved in catalytic reactions. We show that the adatom formation on (100) surfaces is generally easier than that on (111) surfaces. Many adsorbate/metal pairs exist, mostly on Pd, Ni, Rh, Pt, and Ir, for which adsorbates might induce adatom formation under near-ambient conditions on the (100) facet, but not on (111), highlighting the role of more open facets in adatom formation on metals intrinsically harder than Ag, Au, and Cu. Furthermore, our study offers a new perspective towards understanding structure sensitivity in heterogeneous thermal- and electro-catalytic systems such as methane steam reforming, Fischer-Tropsch synthesis, and ammonia decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Toward Rapid Actinium-225 Purification via Membrane Adsorbers with Covalently Tethered Diglycolamide Ligands

Extractive diglycolamide (DGA) resins are used in several state-of-the-art techniques for purifying 225 Ac, a promising radiometal for targeted alpha therapy. Unfortunately, separation processes that rely on resins are often limited to slow flow rates, high elution volumes, and long processing times. Membrane adsorbers functionalized with DGA ligands are an alternative separation material that may overcome these challenges. This work presents (1) the synthesis of an aminated tetrahexyldiglycolamide ligand, (2) the covalent tethering of the ligand to electrospun poly(vinylbenzyl chloride) fiber mats, and (3) the adsorption and desorption of La(III) and 225 Ac. Chemical and physical characterization supports the covalent tethering of the ligand to the fiber mat, as well as the preservation of the fiber surface area and porosity after functionalization. Equilibrium adsorption experiments were performed with stable La(III) and radioactive 225 Ac. Trends in affinity are consistent between commercial resins and the synthesized membrane adsorbers; however, the Langmuir constants and the maximum binding capacity of the membrane adsorbers were generally lower than the resins. Despite these differences, the modeled selectivity for an equimolar solution of La(III)/ 225 Ac in 10 M nitric acid is 57. Furthermore, 225 Ac is rapidly desorbed from the fibers in 10 M nitric acid (<20 min). The La(III)/ 225 Ac selectivity and rapid 225 Ac desorption indicate this class of materials is promising for rapid radioanalytical separations.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

A Gauss’s law analysis of redox active adsorbates on semiconductor electrodes: The charging and faradaic currents are not independent

A detailed framework for modeling and interpreting the data in totality from a cyclic voltammetric measurement of adsorbed redox monolayers on semiconductor electrodes has been developed. A three-layer model consisting of the semiconductor space-charge layer, a surface layer, and an electrolyte layer is presented that articulates the interplay between electrostatic, thermodynamic, and kinetic factors in the electrochemistry of a redox adsorbate on a semiconductor. Expressions are derived that describe the charging and faradaic current densities individually, and an algorithm is demonstrated that allows for the calculation of the total current density in a cyclic voltammetry measurement as a function of changes in the physical properties of the system (e.g., surface recombination, dielectric property of the surface layer, and electrolyte concentration). The most profound point from this analysis is that the faradaic and charging current densities can be coupled. That is, the common assumption that these contributions to the total current are always independent is not accurate. Their interrelation can influence the interpretation of the charge-transfer kinetics under certain experimental conditions. More generally, this work not only fills a long-standing knowledge gap in electrochemistry but also aids practitioners advancing energy conversion/storage strategies based on redox adsorbates on semiconductor electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Overcoming Fundamental Limitations in Adsorbent Design: Alkene Adsorption by Non‐porous Copper(I) Complexes

Abstract Purifying alkenes from alkanes requires cryogenic distillation. This consumes energy equivalent to countries of ca. 5 million people. Replacing distillation with adsorption processes would significantly increase energy efficiency. Trade‐offs between kinetics, selectivity, capacity, and heat of adsorption have prevented production of an optimal adsorbent. We report adsorbents that overcome these trade‐offs. [Cu‐Br] 3 and [Cu‐H] 3 are air‐stable trinuclear complexes that undergo reversible solid‐state inter‐molecular rearrangements to produce dinuclear [Cu‐Br⋅(alkene)] 2 and [Cu‐H⋅(alkene)] 2 . The reversible solid‐state rearrangement, confirmed in situ using powder X‐ray diffraction, allows adsorbent design trade‐offs to be overcome, coupling low heat of adsorption (−10 to −17 kJ mol −1 alkene ), high alkene:alkane selectivity (47; 29), and uptake capacity (>2.5 mol alkene mol −1 Cu3 ). Most remarkably, [Cu‐H] 3 displays fast uptake and regenerates capacity within 10 minutes.

Parasar, Devaborniny↗
DOE OSTI2020

Overcoming Fundamental Limitations in Adsorbent Design: Alkene Adsorption by Non-porous Copper(I) Complexes

Purifying alkenes from alkanes requires cryogenic distillation. This consumes energy equivalent to countries of ca. 5 million people. Replacing distillation with adsorption processes would significantly increase energy efficiency. Trade-offs between kinetics, selectivity, capacity, and heat of adsorption have prevented production of an optimal adsorbent. Here, we report adsorbents that overcome these trade-offs. [Cu-Br] 3 and [Cu-H] 3 are air-stable trinuclear complexes that undergo reversible solid-state inter-molecular rearrangements to produce dinuclear [Cu-Br∙(alkene)] 2 and [Cu-H∙(alkene)] 2 . The reversible solid-state rearrangement, confirmed in situ using powder X-ray diffraction, allows adsorbent design trade-offs to be overcome, coupling low heat of adsorption (-10 to -17 kJ mol -1 alkene ), high alkene:alkane selectivity (47; 29), and uptake capacity (>2.5 molalkene mol -1 Cu3 ). Most remarkably, [Cu-H] 3 displays fast uptake and regenerates capacity within 10 minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ab-initio investigation of the effect of adsorbed salts on segregation of Cr at the Ni (100) surface

The dissolution and depletion of chromium (Cr) in salt facing nickel (Ni) alloy surfaces is one of the predominant degradation mechanisms of structural components in molten salt technology. Here, we use density functional theory to investigate the role of electronic level interactions that may underlie the depletion phenomenon of Cr in a Ni (100) surface exposed to various adsorbed salt species. Our results show that, under vacuum, Ni preferentially segregates to the surface layer. Conversely, in the presence of adsorbed anionic salt species (e.g., chlorine (Cl), fluorine (F) or the impurity oxygen (O)) Cr segregation becomes more favorable. In these cases, Cl has the weakest effect on segregation, while O has the strongest effect. Our analysis reveals the strong correlation between Cr segregation and the amount of valence charge transferred between the Cr atom and surface adsorbate: the greater the charge transfer, the lower the segregation energy. We also show that, when considered, secondary cations screen Cr-anion interactions, which in turn reduce the magnitude of the anions effect on segregation. These results shed light on the role of salt impurities likely play in the overall corrosion phenomena in molten salt environments. This work provides insights into the atomic level interactions fundamental to molten salt corrosion and on the importance of maintaining salt purity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Measurement and analysis of the Doppler broadened energy spectra of gamma radiation originating from the annihilation of positrons incident on clean and adsorbate-covered surfaces

We present measurements and theoretical modeling demonstrating the capability of coincidence Doppler broadened (CDB) annihilation gamma spectroscopy to provide element-specific information from the topmost atomic layer of surfaces. Our measurements show that the energy spectra of Doppler-shifted annihilation gamma photons emitted following the annihilation of positrons from the topmost atomic layers of clean and adsorbate covered surfaces of gold (Au), silver (Ag) and copper (Cu) differ significantly. The shape of the Doppler-broadened gamma spectrum, as analyzed using ratio curves, indicates that the elemental composition of the surface can still be identified despite contributions from positronium annihilation and a significant reduction in core electron annihilation. We estimate the chemical composition of the various probed surfaces by modeling the ratios of the measured Doppler spectra with respect to the Doppler spectra from a clean Cu surface using a linear combination of calculated ratio curves. The fitting of the experimental ratio curves was used to obtain an estimate of the elemental composition of Cu surfaces with sulfur segregation, oxygen adsorption, a thin film of Selenium (Se), and a single layer of graphene (SLG). A similar analysis was performed on the Ag surface with environmental adsorbates, the same surface after argon ion sputtering, as well as a sputter cleaned Au surface. The surface compositions obtained from the analysis of the CDB data were compared to the compositions obtained using positron annihilation induced Auger electron spectroscopy (PAES). Our results show that CDB can detect, identify, and quantify, sub-monolayer adsorbates and a single atomic layer deposited on metal substrates.

Lotfimarangloo, Sima [Univ. of Texas, Arlington, T↗
DOE OSTI2021

CO Dissociation on model Co/SiO 2 catalysts – effect of adsorbed hydrogen

Here we found experimental evidence that shows the effect that adsorbed hydrogen can have on CO dissociation. For cobalt nanoparticles supported on SiO 2 , adsorbed hydrogen enhances CO dissociation. In contrast, adsorbed hydrogen inhibits CO dissociation on a cobalt film supported on SiO 2 . Considering the nature of cobalt deposited by physical vapor deposition, these results can be explained by a preference for CO dissociation to follow the hydrogen-assisted dissociation mechanism on FCC cobalt and step-edges, while the direct dissociation mechanism is preferred on HCP cobalt. These results are in agreement with previous theoretical results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Degradation of Adsorbed Bisphenol A by Soluble Mn(III)

Bisphenol A (BPA), a high production volume chemical and potential endocrine disruptor, is found to be associated with sediments and soils due to its hydrophobicity (log K OW of 3.42). Here, we used superfine powdered activated carbon (SPAC) with a particle size of 1.38 ± 0.03 μm as a BPA sorbent and assessed degradation of BPA by oxidized manganese (Mn) species. SPAC strongly sorbed BPA, and desorption required organic solvents. No degradation of adsorbed BPA (278.7 ± 0.6 mg BPA g –1 SPAC) was observed with synthetic, solid α-MnO 2 with a particle size of 15.41 ± 1.35 μm; however, 89% mass reduction occurred following the addition of 0.5 mM soluble Mn(III). Small-angle neutron scattering data suggested that both adsorption and degradation of BPA occurred in SPAC pores. The findings demonstrate that Mn(III) mediates oxidative transformation of dissolved and adsorbed BPA, the latter observation challenging the paradigm that contaminant desorption and diffusion out of pore structures are required steps for degradation. Soluble Mn(III) is abundant near oxic-anoxic interfaces, and the observation that adsorbed BPA is susceptible to degradation has implications for predicting, and possibly managing, the fate and longevity of BPA in environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗