Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

RELIABILITY BASED DESIGN OF FIXED FOUNDATION WIND TURBINES

Recent analysis of offshore wind turbine foundations using both applicable API and IEC standards show that the total load demand from wind and waves is greatest in wave driven storms. Further, analysis of overturning moment loads (OTM) reveal that impact forces exerted by breaking waves are the largest contributor to OTM in big storms at wind speeds above the operating range of 25 m/s. Currently, no codes or standards for offshore wind power generators have been adopted by the Bureau of Ocean Energy Management Regulation and Enforcement (BOEMRE) for use on the Outer Continental Shelf (OCS). Current design methods based on allowable stress design (ASD) incorporate the uncertainty in the variation of loads transferred to the foundation and geotechnical capacity of the soil and rock to support the loads is incorporated into a factor of safety. Sources of uncertainty include spatial and temporal variation of engineering properties, reliability of property measurements applicability and sufficiency of sampling and testing methods, modeling errors, and variability of estimated load predictions. In ASD these sources of variability are generally given qualitative rather than quantitative consideration. The IEC 61400‐3 design standard for offshore wind turbines is based on ASD methods. Load and resistance factor design (LRFD) methods are being increasingly used in the design of structures. Uncertainties such as those listed above can be included quantitatively into the LRFD process. In LRFD load factors and resistance factors are statistically based. This type of analysis recognizes that there is always some probability of failure and enables the probability of failure to be quantified. This paper presents an integrated approach consisting of field observations and numerical simulation to establish the distribution of loads from breaking waves to support the LRFD of fixed offshore foundations.

17 WIND ENERGY↗

Detection of mycobacterial small RNA in the bacterial culture supernatant and plasma of patients with active tuberculosis

Bacterial small RNA (sRNA) has been shown to play an important role in control of bacteria virulence, stress response and physiological metabolism by post-transcriptional regulation of gene expression. However, there were few reports about bacterial sRNA as a biomarker of infection. To test the potential role of sRNA in indicating infection of Mycobacterium tuberculosis, total RNA were extracted from the filtrated bacterial cultural supernatant. After synthesis of cDNA by reverse transcription, four Mycobacterial sRNAs including ASdes, ASpks, AS1726, and AS1890, which have been experimentally confirmed by Kristine B in the year of 2009, were detected by real time PCR. The specificity was verified by sequencing of the amplified products. Moreover, we demonstrate that the presence of sRNA Asdes in plasma of 55.56% (15/27) TB patients and 25.00% (6/24) normal controls with BCG vaccination (P < 0.05). Our results suggest that bacterial non-coding sRNA can be detected from either bacterial culture supernatants or patient's plasma. Detecting of Mycobacterial sRNA provides a rapid and relatively noninvasive approach for diagnosing disease and could be developed as a biomarker to identify patients with active tuberculosis to help make informed decisions about proper therapies.

60 APPLIED LIFE SCIENCES↗

Spectral line identification from a photoionised silicon plasma in emission

Next-generation X-ray satellite telescopes such as XRISM, NewAthena and Lynx will enable observations of exotic astrophysical sources at unprecedented spectral and spatial resolution. Proper interpretation of these data demands that the accuracy of the models is at least within the uncertainty of the observations. One set of quantities that might not currently meet this requirement is transition energies of various astrophysically relevant ions. Current databases are populated with many untested theoretical calculations. Accurate laboratory benchmarks are required to better understand the coming data. We obtained laboratory spectra of X-ray lines from a silicon plasma at an average spectral resolving power of ∼7500 with a spherically bent crystal spectrometer on the Z facility at Sandia National Laboratories. Many of the lines in the data are measured here for the first time. We report measurements of 53 transitions originating from the K-shells of He-like to B-like silicon in the energy range between ∼1795 and 1880 eV (6.6–6.9 Å). The lines were identified by qualitative comparison against a full synthetic spectrum calculated with ATOMIC. The average fractional uncertainty (uncertainty/energy) for all reported lines is ∼5.4 × 10 −5 . We compare the measured quantities against transition energies calculated with RATS and FAC as well as those reported in the NIST ASD and XSTAR’s uaDB. Average absolute differences relative to experimentally measured values are 0.20, 0.32, 0.17 and 0.38 eV, respectively. All calculations/databases show good agreement with the experimental values; NIST ASD shows the closest match overall.

astrophysical plasmas↗

Efficient Intermolecular Energy Exchange and Soft-ionization of Water at Nanoplatelet Interfaces

X-ray, energetic photon and electron irradiation can ionize and electronically excite target atoms and molecules. These excitations undergo complicated relaxation and energy transfer processes that ultimately determine the manifold of system responses to the deposited excess energy. In weakly bound gas- and solution-phase samples, intermolecular Coulomb decay (ICD) and electron-transfer mediated decay (ETMD) can occur with neighboring atoms or molecules leading to efficient transfer of the excess energy to the surroundings. In ionic solids such as metal-oxides, intra- and inter-atomic Auger decay produces localized final states that lead to lattice damage and typically removal of cations from the substrate. The relative importance of Auger stimulated damage (ASD) versus ICD and ETMD in micro-solvated nanoparticle interfaces is not known. Though ASD is generally expected, essentially no lattice damage and very efficient ICD and ETMD resulting from ionization and electronic excitation of micro-solvated boehmite (AlOOH) nanoplatelets has been observed. Efficient energy transfer and soft ionization of interfacial molecules is likely a general phenomenon at gas-oxyhydroxide nanoparticle interfaces where the density of states of the ionized chemisorbed species significantly overlap the core hole states of the solid.

Jones, Brant M.↗

Anomalous Structural Disorder in Supported Pt Nanoparticles

Supported Pt nanocatalysts generally exhibit anomalous behavior, including negative thermal expansion and large structural disorder. Finite temperature DFT/MD simulations reproduce these properties, showing that they are largely explained by a combination of thermal vibrations and low-frequency disorder. We show in this paper that a full interpretation is more complex and that the DFT/MD mean-square relative displacements (MSRD) can be further separated into vibrational disorder, “dynamic structural disorder” (DSD), and long-time equilibrium fluctuations of the structure dubbed “anomalous structural disorder” (ASD). We find that the vibrational and DSD components behave normally, increasing linearly with temperature while the ASD decreases, reflecting the evolution of mean nanoparticle geometry. Finally, as a consequence the usual procedure of fitting the MSRD to normal vibrations plus temperature-independent static disorder results in unphysical bond strengths and Grüneisen parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic density effects on temperature characteristics and thermal transport at grain boundaries through a proper bin size selection

This study focuses on the proper characterization of temperature profiles across grain boundaries (GBs) in order to calculate the correct interfacial thermal resistance (ITR) and reveal the influence of GB geometries onto thermal transport. The solid-solid interfaces resulting from the orientation difference between the (001), (011), and (111) copper surfaces were investigated. Temperature discontinuities were observed at the boundary of grains due to the phonon mismatch, phonon backscattering, and atomic forces between dissimilar structures at the GBs. We observed that the temperature decreases gradually in the GB area rather than a sharp drop at the interface. As a result, three distinct temperature gradients developed at the GB which were different than the one observed in the bulk solid. This behavior extends a couple molecular diameters into both sides of the interface where we defined a thickness at GB based on the measured temperature profiles for characterization. Results showed dependence on the selection of the bin size used to average the temperature data from the molecular dynamics system. The bin size on the order of the crystal layer spacing was found to present an accurate temperature profile through the GB. We further calculated the GB thickness of various cases by using potential energy (PE) distributions which showed agreement with direct measurements from the temperature profile and validated the proper binning. The variation of grain crystal orientation developed different molecular densities which were characterized by the average atomic surface density (ASD) definition. Our results revealed that the ASD is the primary factor affecting the structural disorders and heat transfer at the solid-solid interfaces. Using a system in which the planes are highly close-packed can enhance the probability of interactions and the degree of overlap between vibrational density of states (VDOS) of atoms forming at interfaces, leading to a reduced ITR. Thus, an accurate understanding of thermal characteristics at the GB can be formulated by selecting a proper bin size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Image quality in thoracic 4D cone-beam CT: A sensitivity analysis of respiratory signal, binning method, reconstruction algorithm, and projection angular spacing

Purpose: Respiratory signal, binning method, and reconstruction algorithm are three major controllable factors affecting image quality in thoracic 4D cone-beam CT (4D-CBCT), which is widely used in image guided radiotherapy (IGRT). Previous studies have investigated each of these factors individually, but no integrated sensitivity analysis has been performed. In addition, projection angular spacing is also a key factor in reconstruction, but how it affects image quality is not obvious. An investigation of the impacts of these four factors on image quality can help determine the most effective strategy in improving 4D-CBCT for IGRT. Methods: Fourteen 4D-CBCT patient projection datasets with various respiratory motion features were reconstructed with the following controllable factors: (i) respiratory signal (real-time position management, projection image intensity analysis, or fiducial marker tracking), (ii) binning method (phase, displacement, or equal-projection-density displacement binning), and (iii) reconstruction algorithm [Feldkamp–Davis–Kress (FDK), McKinnon–Bates (MKB), or adaptive-steepest-descent projection-onto-convex-sets (ASD-POCS)]. The image quality was quantified using signal-to-noise ratio (SNR), contrast-to-noise ratio, and edge-response width in order to assess noise/streaking and blur. The SNR values were also analyzed with respect to the maximum, mean, and root-mean-squared-error (RMSE) projection angular spacing to investigate how projection angular spacing affects image quality. Results: The choice of respiratory signals was found to have no significant impact on image quality. Displacement-based binning was found to be less prone to motion artifacts compared to phase binning in more than half of the cases, but was shown to suffer from large interbin image quality variation and large projection angular gaps. Both MKB and ASD-POCS resulted in noticeably improved image quality almost 100% of the time relative to FDK. In addition, SNR values were found to increase with decreasing RMSE values of projection angular gaps with strong correlations (r ≈ −0.7) regardless of the reconstruction algorithm used. Conclusions: Based on the authors’ results, displacement-based binning methods, better reconstruction algorithms, and the acquisition of even projection angular views are the most important factors to consider for improving thoracic 4D-CBCT image quality. In view of the practical issues with displacement-based binning and the fact that projection angular spacing is not currently directly controllable, development of better reconstruction algorithms represents the most effective strategy for improving image quality in thoracic 4D-CBCT for IGRT applications at the current stage.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Phase 1 Development Report for the SESSA Toolkit.

The Site Exploitation System for Situational Awareness ( SESSA ) tool kit , developed by Sandia National Laboratories (SNL) , is a comprehensive de cision support system for crime scene data acquisition and Sensitive Site Exploitation (SSE). SESSA is an outgrowth of another SNL developed decision support system , the Building R estoration Operations Optimization Model (BROOM), a hardware/software solution for data acquisition, data management, and data analysis. SESSA was designed to meet forensic crime scene needs as defined by the DoD's Military Criminal Investigation Organiza tion (MCIO) . SESSA is a very comprehensive toolki t with a considerable amount of database information managed through a Microsoft SQL (Structured Query Language) database engine, a Geographical Information System (GIS) engine that provides comprehensive m apping capabilities, as well as a an intuitive Graphical User Interface (GUI) . An electronic sketch pad module is included. The system also has the ability to efficiently generate necessary forms for forensic crime scene investigations (e.g., evidence submittal, laboratory requests, and scene notes). SESSA allows the user to capture photos on site, and can read and generate ba rcode labels that limit transcription errors. SESSA runs on PC computers running Windows 7, but is optimized for touch - screen tablet computers running Windows for ease of use at crime scenes and on SSE deployments. A prototype system for 3 - dimensional (3 D) mapping and measur e ments was also developed to complement the SESSA software. The mapping system employs a visual/ depth sensor that captures data to create 3D visualizations of an interior space and to make distance measurements with centimeter - level a ccuracy. Output of this 3D Model Builder module provides a virtual 3D %22walk - through%22 of a crime scene. The 3D mapping system is much less expensive and easier to use than competitive systems. This document covers the basic installation and operation of th e SESSA tool kit in order to give the user enough information to start using the tool kit . SESSA is currently a prototype system and this documentation covers the initial release of the tool kit . Funding for SESSA was provided by the Department of Defense (D oD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL) . ACKNOWLEDGEMENTS The authors wish to acknowledge the funding support for the development of the Site Exploitation System for Situational Awareness (SESSA) toolkit from the Department of Defense (DoD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL). Special thanks to Mr. Garold Warner, of DFSC, who served as the Project Manager. Individuals that worked on the design, functional attributes, algorithm development, system arc hitecture, and software programming include: Robert Knowlton, Brad Melton, Robert Anderson, and Wendy Amai.

Knowlton, Robert G.↗

Adjustable Speed Drive Part-Load Efficiency - Motor Tip Sheet #11

An adjustable speed drive (ASD) is a device that controls the rotational speed of motor-driven equipment. Variable frequency drives (VFDs), the most common type of ASDs, efficiently meet varying process requirements by adjusting the frequency and voltage of the power supplied to an AC motor to enable it to operate over a wide speed range. External sensors monitor flow, liquid levels, or pressure and then transmit a signal to a controller that adjusts the frequency and speed to match process requirements.

Industrial, Industry↗

Evaluating Tunable Lighting in Classrooms: Trial LED lighting systems in three classrooms in the Folsom Cordova Unified School District (Supplemental Report)

This report summarizes the results from a trial installation of light-emitting diode (LED) lighting systems installed in three classrooms at Gold Ridge Elementary (GRE) School in the Folsom Cordova Unified School District (FCUSD) in Folsom, CA. FCUSD asked the Sacramento Utility District (SMUD) to help them explore potential benefits of tunable-white lighting systems for children with Autism Spectrum Disorder (ASD). SMUD responded by implementing a research project and invited Pacific Northwest National Laboratory (PNNL) to document the performance of the LED lighting systems as part of a GATEWAY evaluation. SMUD and FCUSD staff coordinated and completed the design and installation of the LED systems, and coordinated the collection of data from teachers, students, and parents, while PNNL evaluated the energy and photometric performance of the systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cloud optical and microphysical properties derived from ground-based and satellite sensors over a site in the Yangtze Delta region: CLOUD PROPERTIES IN EASTERN CHINA

Comprehensive surface - based retrievals of cloud optical and microphysical properties were made at Taihu, a highly polluted site in central Yangtze Delta region, during a research campaign from May 2008 to December 2009. C loud optical depth (COD) , effective radius (R e ) and liquid water path (LWP) were retrieved from measurements made with a suite of ground - based and space - borne instruments, including an Analytical Spectral Devices (ASD) spectroradiometer , a Multi - Filter Rotating Shadowband R adiometer (MFRSR) , a Multichannel Microwave Radiometer Profiler (MWRP), and the Moderate Resolution Imaging Spectroradiometer ( MODIS) on Terra and Aqua satellites . Retrievals from zenith radiance measurements capture better the temporal variation of cloud properties than do retrievals from hemispherical fluxes . Annual mean LWP, COD and R e are 115.8 ± 90.8 g/m 2 , 28.5 ± 19.2, and 6.9 ± 4.2 μ m . Over 90% of LWP is less than 250 g/m 2 . Most of COD (>90%) fall s between 5 and 60 and ~ 80% of R e is less than 10 μ m . Maximum ( minimum ) values of LWP and R e occur in summer ( winter ); COD is highest in winter and spring. R aining and non - raining clouds have significant difference s in LWP, COD and R e . R ainfall frequency i s best correlated with LWP, followed by COD and R e . Cloud properties retrieved from multiple ground - based instruments are also compared with those from satellite retrievals. On average, relative to surface retrievals, mean differences of satellite retrievals in cloud LWP, COD and R e were - 33.6 g/m 2 ( - 26.4%), - 5.8 ( - 31.4%), and 2.9 μ m (29.3% ) for 11 MODIS - Terra overpasses , and - 43.3 g/m 2 ( - 2 2.3 %), - 3.0 ( - 10.0 %) and - 1.3 μ m ( - 12.0 %) for 8 MODIS - Aqua 40 overpasses, respectively. These discrep ancies indicate that MODIS cloud products still suffer 41 from large uncertainties in this region

Liu, Jianjun↗

Energies and transition parameters of fusion interest in Cr-like ions between Hf XLIX and Au LVI

Using fully relativistic multiconfiguration Dirac–Fock (MCDF) wavefunctions in an active space approximation, we perform systematic calculations of the energies, wavelengths, and lifetimes for the lowest 143 levels belonging to the 3p{sup 6}3d{sup 6} and 3p{sup 5}3d{sup 7} configurations of Cr-like ions between Hf XLIX and Au LVI. Additionally, line strengths, oscillator strengths, and radiative rates for the electric dipole (E1), electric quadrupole (E2), magnetic dipole (M1), and magnetic quadrupole (M2) transitions among these levels are reported. In the calculations, the contributions from Breit interaction (BI) and quantum electrodynamics (QED) corrections to the wave functions are taken into account (the addition of the BI and QED in CI affects both the wave functions and the level energies). For some excited states, there are no other theoretical and/or experimental data to compare with to illustrate the quality of our results/assess the accuracy. A similar calculation has been performed with the Flexible Atomic Code (FAC), using W LI as an example. The results obtained in this work are compared with the data compiled in the Atomic Spectra Database (ASD) of the National Institute of Standards and Technology (NIST) and other available theoretical/experimental information. Satisfactory agreement is found between them. The energies agree within 0.8% with the experimental results, and the M1 transition rates agree within 5% with other theoretical results. The present results are more extensive than those from previous calculations and considerably expand the existing data sets for Cr-like ions. This study should be beneficial for the analysis of experimental spectra and modeling of fusion plasmas.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multi-criteria group decision-making based sustainability measurement of wastewater treatment processes

There are various processes which can be used for wastewater treatment (WT), and the selection of the most sustainable one among different processes is a hard task. This study aims at helping the decision-makers (DM) to address this by developing an intuitionistic fuzzy set (IFS) theory based group multi-attribute decision analysis (MADA) method. Ten criteria in environment, economy, society-politic, and technology dimensions were employed to achieve sustainability measurement (SM) of WT processes. The multi-criteria sustainability assessment method developed in this study allow different experts to attend the SM, and enable the participants to employ the natural language/words to depict their intuitionistic opinions. Accordingly, the proposed method can achieve group SM under uncertainties. An illustrative case including four processes for wastewater treatment, namely Anaerobic-Anoxic-Oxic (AAO) process, Triple Oxidation Ditch (TOD) process, Anaerobic single-ditch oxidation (ASD) process, and Sequencing batch reactor activated sludge process (SBR), has been studied, and the results reveal that this method can determine sustainability sequence of different WT processes.

54 ENVIRONMENTAL SCIENCES↗

Recognizing Amazonian tree species in the field using bark tissues spectra

The identification of tree species in the field is often a subjective process and misidentifications cause many problems for forest management in the Amazon Forest. Near infrared spectra from dried leaves of herbarium specimens are able to distinguish species in tropical forests. However, tools to improve species identification directly in the field are needed. In this study, we tested whether spectral reflectance of bark tissues (rhytidome and phloem) collected with a portable spectrometer in the field can be used for the discrimination of tree species. Spectral data was collected for 254 trees of 8 families, 10 genera and 11 species from terra firme forests in Central Amazon with an ASD field spectrometer. Data consisted of reflectance values within 350–2500 nm wavelengths. We compared the rate of correct species recognition for different datasets using linear discriminant models. The rate of correct species assignment using this technique was 98% when using spectra from the inner bark (phloem) and 94% with outer bark (rhytidome) spectra. We suggest that the application of this technique can improve the quality of species identification directly during field inventories, fostering better forest management practices.

54 ENVIRONMENTAL SCIENCES↗

Posttraumatic Stress Disorder After High-Dose-Rate Brachytherapy for Cervical Cancer With 2 Fractions in 1 Application Under Spinal/Epidural Anesthesia: Incidence and Risk Factors

Purpose: To investigate the psychological consequences of high-dose-rate brachytherapy with 2 fractions in 1 application under spinal/epidural anesthesia in the treatment of locally advanced cervical cancer. Methods and Materials: In 50 patients with locally advanced cervical cancer, validated questionnaires were used for prospective assessment of acute and posttraumatic stress disorder (ASD/PTSD) (Impact of Event Scale–Revision), anxiety/depression (Hospital Anxiety and Depression Scale), quality of life (European Organization for Research and Treatment of Cancer Quality of Life Questionnaire Core 30/Cervical Cancer 24), physical functioning (World Health Organization performance status), and pain (visual analogue scale), before and during treatment and 1 week and 3 months after treatment. Qualitative interviews were recorded in open format for content analysis. Results: Symptoms of ASD occurred in 30% of patients 1 week after treatment; and of PTSD in 41% 3 months after treatment in association with this specific brachytherapy procedure. Pretreatment predictive variables explain 82% of the variance of PTSD symptoms. Helpful experiences were the support of the treatment team, psychological support, and a positive attitude. Stressful factors were pain, organizational problems during treatment, and immobility between brachytherapy fractions. Conclusions: The specific brachytherapy procedure, as performed in the investigated mono-institutional setting with 2 fractions in 1 application under spinal/epidural anesthesia, bears a considerable risk of traumatization. The source of stress seems to be not the brachytherapy application itself but the maintenance of the applicator under epidural anesthesia in the time between fractions. Patients at risk may be identified before treatment, to offer targeted psycho-social support. The patients' open reports regarding helpful experiences are an encouraging feedback for the treatment team; the reported stressful factors serve as a basis for improvement of patient management, especially regarding pain control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural and magnetic properties of La2Ni1−xCoxMnO6 compounds

Highlights: • Monoclinic La2Ni1−xCoxMnO6 samples have been prepared using Sol-gel technique. • Rietveld analysis shows an octahedrally distorted double perovskite structure. • The nature of FM interaction and TC depend on the B-site ions. • The short range FM ordering above TC is induced by antisite disorders. • The existence of any spin glass like phase in such system is discarded. - Abstract: Single phase monoclinic La{sub 2}Ni{sub 1−x}Co{sub x}MnO{sub 6} (x = 0.2, 0.4, 0.8) compounds, henceforth, referred as LNC{sub x}MO (x = 0.2, 0.4, 0.8) have been prepared by Sol–gel technique. The structural study and redox titration suggest that the samples are both La and O deficient. The generated atomic models using Rietveld refined structural parameters show octahedral distortion in the double perovskite structure. X-ray photoelectron spectroscopy (XPS) study has been used to determine the predominant valence states of Ni, Mn and Co ions. LNC{sub x}MO (x = 0.2, 0.4) are found to be Heisenberg ferromagnets whereas LNC{sub 0.8}MO is a phase segregated system. In LNC{sub 0.4}MO and LNC{sub 0.8}MO, at temperatures above T{sub C}, χ{sup −1}(T) curve shows the characteristics of Griffiths phase. The study of ac susceptibility and isothermal remanent magnetization (IRM) discard the possibility of any glassy state at low temperatures. The antiphase boundaries (APBs), antisite disorders (ASDs) and oxygen vacancies play important roles in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Leveraging transfer learning and leaf spectroscopy for leaf trait prediction with broad spatial, species, and temporal applicability

Accurate and reliable prediction of leaf traits is crucial for understanding plant adaptations to environmental variation, monitoring terrestrial ecosystems, and enhancing comprehension of functional diversity and ecosystem functioning. Currently, various approaches (e.g., statistical, physical models) have been developed to estimate leaf traits through hyperspectral remote sensing and leaf spectroscopy. However, the absence of high-performing, transferable, and stable models across various domains of space, plant functional types (PFTs) and seasons hinder our ability to quantify and comprehend spatiotemporal variations in leaf traits. This study proposes robust and highly transferable models for better predicting leaf traits with hyperspectral reflectance. Initially, three datasets were assembled, pairing common leaf traits — chlorophyll (Chla+b), carotenoids (Ccar), leaf mass per area (LAM), equivalent water thickness (EWT) — with leaf spectra measurements collected across diverse geographic locations in the U.S. and Europe, PFTs, and seasons. Measurements were acquired using spectroradiometers (e.g., ASD FieldSpec 3/4/Pro and SVC HR-1024i) with integrating spheres, leaf clips, and contact probes. Here, we then developed transfer learning-based hybrid models that incorporated the domain knowledge of radiative transfer models (RTMs) through pretraining processes and were well-constrained by fine-tuning with field measurements. Through comparison with other state-of-the-art statistical models, including partial-least squares regression (PLSR) and Gaussian Process Regression (GPR), as well as pure physical models, we found that the proposed transfer learning models achieved better predictive performance and higher transferability. Specifically, compared to other statistical models and pure RTMs, the transfer learning model exhibited higher coefficient of determination (R 2 ) values with range of 0.01 to 0.79, lower normalized root mean square error (NRMSE) with range of 0.06 % to 33.25 % in model performance. Additionally, the models exhibited improved transferability, with higher R 2 values range from 0.04 to 0.32, lower NRMSE range from 0.08 % to 30.81 %. The findings underscore that transfer learning models through integrating domain knowledge from RTMs and limited observations, can harness the advantages of both RTMs and statistical models and serve as a promising approach for effectively predicting leaf traits.

59 BASIC BIOLOGICAL SCIENCES↗