Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Atomic ordering in CdSe/ZnSe/MgS quantum dots studied by EXAFS

The local structure of CdSe single quantum dots layer grown by molecular beam epitaxy on GaAs substrates was investigated by the extended x-ray absorption fine structure method (EXAFS). From the quantitative analysis of the data the local neighborhood of Cd atoms was reconstructed. It was found that the second coordination shell is highly disordered and that the quantum dots consist to around 50% of Cd atoms on cation sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly tensile-strained, type-II, Ga{sub 1-x}In{sub x}As/GaSb quantum wells

We have investigated the properties of highly tensile-strained (Ga,In)As layers in a GaSb matrix. In situ observations of the growth mode suggest the formation of (Ga,In)As quantum dots. In contrast, ex situ transmission electron microscopy evidences the formation of perfect quantum wells with the presence of a (Ga,In)Sb interfacial layer. This is analyzed taking into account the surfactant behavior of Sb and stabilization of the system by reduction of the overall strain. Photoluminescence is observed up to 3.0 mum at room temperature, in good agreement with calculations assuming a type-II band alignment and including the (Ga,In)Sb interfacial layer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Gold-free GaAs/GaAsSb heterostructure nanowires grown on silicon

Growth of GaAs/GaAsSb heterostructure nanowires on silicon without the need for gold seed particles is presented. A high vertical yield of GaAs nanowires is first obtained, and then GaAs{sub x}Sb{sub 1-x} segments are successfully grown axially in these nanowires. GaAsSb can also be integrated as a shell around the GaAs core. Finally, two GaAsSb segments are grown inside a GaAs nanowire and passivated using an Al{sub x}Ga{sub 1-x}As shell. It is found that no stacking faults or twin planes occur in the GaAsSb segments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth and ferrimagnetic properties of Mn film on GaSb(100)

We report on the epitaxial stabilization and magnetic properties of Mn films on GaSb(100) using molecular beam epitaxy, a follow-up to our previous work on the growth of Mn films on GaAs(100) [Phys. Rev. B 79, 045309 (2009)]. A strong ferrimagnetic ordering was observed which was attributed to the largely expanded lattice parameter resulting from the lattice mismatch with substrate and the enhanced thermal energy with increasing growth temperature. The observed magnetic moment of 1.16{mu}{sub B}/Mn atom was several times larger than that observed in the Mn/GaAs(100) films due to the lattice constant difference of substrates. The in-plane magnetoresistance behavior demonstrated the magnetic anisotropy that might result from the slightly distorted cubic structure of {alpha}-Mn phase under low-dimensional growth.

36 MATERIALS SCIENCE↗

Harmonic Responses in 2DEG AlGaAs/GaAs HEMT Devices Due to Plasma Wave Interaction

Plasma waves are oscillations of electron density in time and space, and in deep submicron field effect transistors, typical plasma frequencies, omega{sub p}, lie in the terahertz range and do not involve any quantum transitions. Hence, using plasma wave excitation for detection and/or generation of THz oscillations is a very promising approach. In this paper, the investigation of plasma wave interaction between the plasma waves propagating in a short-channel High-Electron-Mobility Transistor (HEMT) and the radiated electromagnetic waves was carried out. Experimentally, we have demonstrated the detection of the terahertz (THz) radiation by an AlGaAs/GaAs HEMT up to third harmonic at room temperature and their resonant responses show very good agreement with the calculated results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A thermodynamic analysis of native point defect and dopant solubilities in zinc-blende III-V semiconductors

A thermodynamic model is used to analyze available experimental data relevant to point defects in the binary zinc-blende III-V compounds (Ga,In)-(P,As,Sb). The important point defects and their complexes in each of the materials are identified and included in the model. Essentially all of the available experimental data on dopant solubility, crystal density, and lattice parameter of melt and solution grown crystals and epilayers are reproduced by the model. It extends an earlier study [Hurle, J. Appl. Phys. 85, 6957 (1999)] devoted solely to GaAs. Values for the enthalpy and entropy of formation of both native and dopant related point defects are obtained by fitting to experimental data. In undoped material, vacancies, and interstitials on the Group V sublattice dominate in the vicinity of the melting point (MP) in both the phosphides and arsenides, whereas, in the antimonides, vacancies on both sublattices dominate. The calculated concentrations of the native point defects are used to construct the solidus curves of all the compounds. The charged native point defect concentrations at the MP in four of the six materials are significantly higher than their intrinsic carrier concentrations. Thus the usually assumed high temperature 'intrinsic' electroneutrality condition for undoped material (n=p) is not valid for these materials. In GaSb, the Ga{sub Sb} antisite defect appears to be grown-in from the melt. This contrasts with the As{sub Ga} defect in GaAs for which the concentration grown-in at the MP is negligibly small. Compensation of donor-doped material by donor-Group III vacancy complexes is shown to exist in all the compounds except InP where Group VI doped crystals are uncompensated and in InSb where there is a lack of experimental data. The annealing effects in n{sup +} GaAs, including lattice superdilation, which were shown in the earlier paper to be due to Group III vacancy undersaturation during cooling, are found to be present also in GaSb and InAs. Results for native point defects are compared with reported ''first principles'' calculations for GaAs. It is seen that, while there is some accord with experimental findings for low temperature molecular beam epitaxial (MBE) growth, they fail totally to predict the behavior under high temperature growth conditions. The analysis of data on liquid phase epitaxy (LPE) growth of GaAs from Bi solution in the earlier paper has been re-calculated in the light of experimental data that showed that the model used in that paper to represent the Ga-As-Bi phase equilibria was inadequate. An improved model reveals that Ga vacancies exert a greater effect in controlling the extent of the linear range of donor dopant solubility than previously predicted. It has also led to a re-evaluation of the equilibrium EL2 and Ga vacancy concentrations in GaAs during MBE growth under As-rich conditions at low temperatures ({approx}500 K). The amended model predicts that the very high concentrations of EL2 and of Ga vacancies observed experimentally are near equilibrium values. The predicted increase in the equilibrium concentrations of these defects at low temperatures results from coulombic attraction between the two defects. At temperatures somewhat lower than 500 K the rate of increase becomes catastrophic.

36 MATERIALS SCIENCE↗

Thickness evaluation of InGaAs/InAlAs quantum wells

This work proposes a new optoelectronic measurement of quantum well (QW) thickness and applies it to doped and undoped In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As multiple-QW structures. Near-infrared spectroscopic identification of the interband optical transition at 100-300 K gave the eigenenergies of the conduction band in the QW. Evaluation of the QW thickness involved analysis of the effective mass at the corresponding eigenenergy. QW thicknesses in the range of 5.45-20.8 nm were determined in six different wafers. These thicknesses agreed well with the QW thicknesses estimated by double-crystal x-ray diffraction within almost two monolayers. This measurement was used to determine the distance of potential boundaries confining the electron wave functions.

36 MATERIALS SCIENCE↗

InAs quantum wire induced composition modulation in an In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layer grown on an InP substrate

Composition modulations are observed by transmission electron microscopy in In{sub 0.53}Ga{sub 0.37}Al{sub 0.10}As barrier layers that overgrow both single- and multilayer InAs quantum wire structures grown on an InP substrate. Indium-rich (gallium-deficient) regions were observed in the region of the barrier layer lying directly above individual quantum wires, while indium-deficient (gallium-rich) regions were detected in the barrier above the gaps between adjacent underlying quantum wires. The magnitude of such modulation was typically 7% (atomic percent) for both indium and gallium as estimated from the energy dispersive x-ray analysis. The origin of such composition modulations was determined by modeling the chemical potential distribution for indium and gallium on the growth front of the barrier layer at the initial capping stage of the quantum wires with finite element simulations. It is found that the number and positions of the indium-rich regions are determined by the combined effects of strain and surface energy distributions on the barrier material capping the quantum wires. Moreover the estimated magnitudes of the composition modulation for both indium and gallium from the finite element models are in good agreement with the experimental observations. This method provides a simple way to understand the origin of, and to estimate the magnitude of the quantum wire-induced composition modulation in the barrier layer.

36 MATERIALS SCIENCE↗

Low frequency noise in InSb/GaAs and InSb/Si channels

The low frequency noise features of InSb grown on GaAs and Si substrates using molecular-beam epitaxy are investigated in the temperature range from 80 to 300 K. In all samples the flicker noise dominates the spectra, with Hooge factors as low as 2x10{sup -5} and 9x10{sup -5} for InSb on GaAs and Si, respectively. The temperature dependence of the Hooge factors is investigated.

36 MATERIALS SCIENCE↗

Microwave induced zero-conductance state in a Corbino geometry two-dimensional electron gas with capacitive contacts

Microwave induced photoconductivity of a two-dimensional electron gas in selectively doped GaAs/AlAs heterostructures has been studied using the Corbino geometry with capacitive contacts at a temperature T=1.6 K and magnetic field B up to 0.5 T. Zero-conductance states have been observed in the samples under study subject to microwave radiation, similarly to the samples with Ohmic contacts. It has been shown that Ohmic contacts do not play a significant role for observation of zero-conductance states induced by microwave radiation.

36 MATERIALS SCIENCE↗

Epitaxial EuO thin films on GaAs

We demonstrate the epitaxial growth of EuO on GaAs by reactive molecular beam epitaxy. Thin films are grown in an adsorption-controlled regime with the aid of an MgO diffusion barrier. Despite the large lattice mismatch, it is shown that EuO grows well on MgO(001) with excellent magnetic properties. Epitaxy on GaAs is cube-on-cube and longitudinal magneto-optic Kerr effect measurements demonstrate a large Kerr rotation of 0.57 deg., a significant remanent magnetization, and a Curie temperature of 69 K.

36 MATERIALS SCIENCE↗

Structural and resistance switching properties of ZnO/SrTiO{sub 3}/GaAs heterostructure grown by laser molecular beam epitaxy

ZnO thin films were epitaxially grown on (001) GaAs substrate by laser molecular beam epitaxy with SrTiO{sub 3} (STO) as a buffer layer. The interface properties of ZnO/GaAs heterostructure are greatly improved by inserting STO buffer layer. The interfacial effects on the transport and dielectric characteristics of the heterostructure have been investigated. The current-voltage characteristic of the heterostructure reveals an asymmetric and resistance switching behavior, exhibiting a temperature-dependent resistance hysteresis in the temperature range of 50-300 K. These measured properties could be attributed to the charge effect at the interface of the heterostructure.

36 MATERIALS SCIENCE↗

2-3 {mu}m mid infrared light sources using InGaAs/GaAsSb ''W'' type quantum wells on InP substrates

We have investigated the InGaAs/GaAsSb/InAlGaAs/InAlAs type-II ''W'' quantum wells (QWs) grown on InP substrates by molecular beam epitaxy. The photoluminescence (PL) emission wavelength longer than 2.56 {mu}m at room temperature (RT) is demonstrated for the first time in this material system. The PL emission peaks of our designed samples can cover a wide range from 2 to 2.5 {mu}m at cryogenic temperature. The samples show good optical quality that the reduction in integrated PL intensity is only around one order of magnitude from 35 K to RT. We found that the integrated PL intensity decreased as the emission wavelength increased, which is due to the reduction in the electron-hole wave function overlap. This is consistent with the calculated result. In the power dependent PL measurements, the emission peak of ''W'' type QWs show blue shifts with the excitation power (P{sub ex}) but does not follow the P{sub ex}{sup 1/3} rule as predicted by type-II band bending model. The localized states filling effect gives reasonable explanations for the observed phenomena.

36 MATERIALS SCIENCE↗

GaAs, AlGaAs and InGaP Tunnel Junctions for Multi-Junction Solar Cells Under Concentration: Resistance Study

The following four TJ designs, AlGaAs/AlGaAs, GaAs/GaAs, AlGaAs/InGaP and AlGaAs/GaAs are studied to determine minimum doping concentration to achieve a resistance of <10{sup -4} {omega}{center_dot}cm{sup 2} and a peak tunneling current suitable for MJ solar cells up to 1500-suns concentration (operating current of 21 A/cm{sup 2}). Experimentally calibrated numerical models are used to determine how the resistance changes as a function of doping concentration. The AlGaAs/GaAs TJ design is determined to require the least doping concentration to achieve the specified resistance and peak tunneling current, followed by the GaAs/GaAs, and AlGaAs/AlGaAs TJ designs. The AlGaAs/InGaP TJ design can only achieve resistances >5x10{sup -4} {omega}cm{sup 2}.

36 MATERIALS SCIENCE↗

High efficiency semimetal/semiconductor nanocomposite thermoelectric materials

Rare-earth impurities in III-V semiconductors are known to self-assemble into semimetallic nanoparticles which have been shown to reduce lattice thermal conductivity without harming electronic properties. Here, we show that adjusting the band alignment between ErAs and In{sub 0.53}Ga{sub 0.47-X}Al{sub X}As allows energy-dependent scattering of carriers that can be used to increase thermoelectric power factor. Films of various Al concentrations were grown by molecular beam epitaxy, and thermoelectric properties were characterized. We observe concurrent increases in electrical conductivity and Seebeck coefficient with increasing temperatures, demonstrating energy-dependent scattering. We report the first simultaneous power factor enhancement and thermal conductivity reduction in a nanoparticle-based system, resulting in a high figure of merit, ZT=1.33 at 800 K.

36 MATERIALS SCIENCE↗

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Direct growth of InAsP/InP quantum well heterostructures on Si using crystalline SrTiO{sub 3}/Si templates

Integrating III-V semiconductors on Si is one of the major challenges of epitaxial growth and presents important applicative interest. We describe here an approach based on the use of crystalline SrTiO{sub 3} (STO)/Si templates. The structural and optical properties of InAsP/InP quantum well heterostructures grown directly on Si and on STO/Si templates are compared. Using STO/Si templates strongly improves the structural properties of the III-V heterostructure, and allows observing room-temperature photoluminescence from the quantum well.

36 MATERIALS SCIENCE↗

Effects of Detuning on Control of Intersubband Quantum Well Transitions with Chirped Electromagnetic Pulses

We study the interaction of a chirped electromagnetic pulse with intersubband transitions of a double semiconductor quantum well. We specifically consider the interaction of the ground and first excited subbands with the electromagnetic field and use the nonlinear density matrix equations for the description of the system dynamics. These equations are solved numerically for various values of the electron sheet density for a realistic double GaAs/AlGaAs quantum well, and the efficiency of population transfer is discussed with emphasis given to the effects of the detuning of the central frequency of the electromagnetic field from resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗