Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMORPHOUS STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Reducing the stochasticity of crystal nucleation to enable subnanosecond memory writing

Operation speed is a key challenge in phase-change random-access memory (PCRAM) technology, especially for achieving subnanosecond high-speed cache memory. Commercialized PCRAM products are limited by the tens of nanoseconds writing speed, originating from the stochastic crystal nucleation during the crystallization of amorphous germanium antimony telluride (Ge 2 Sb 2 Te 5 ). Here, we demonstrate an alloying strategy to speed up the crystallization kinetics. The scandium antimony telluride (Sc 0.2 Sb 2 Te 3 ) compound that we designed allows a writing speed of only 700 picoseconds without preprogramming in a large conventional PCRAM device. This ultrafast crystallization stems from the reduced stochasticity of nucleation through geometrically matched and robust scandium telluride (ScTe) chemical bonds that stabilize crystal precursors in the amorphous state. Controlling nucleation through alloy design paves the way for the development of cache-type PCRAM technology to boost the working efficiency of computing systems.

Science & Technology - Other Topics↗

TRANSLATIONAL AND ROTATIONAL ENERGY MEASUREMENTS OF PHOTODESORBED WATER MOLECULES IN THEIR VIBRATIONAL GROUND STATE FROM AMORPHOUS SOLID WATER

For interstellar grains coated with water ice, the most important desorption mechanism at the edge of molecular clouds is photodesorption of water. To reveal details of the photodesorption mechanism, we have measured the translational and rotational energies of H{sub 2}O (v = 0) molecules photodesorbed from amorphous solid water and polycrystalline ice following excitation within the first absorption band using a 157 nm laser. The measured translational and rotational temperatures are 1800 K and 300 K, respectively. These energies are in good accord with those predicted by classical molecular dynamics calculations for the 'kick-out' of an H{sub 2}O molecule in the ice by an energetic H atom. The statistical ortho:para ratio of g {sub OPR} = 3 is appropriate for the Boltzmann rotational distribution of the H{sub 2}O molecules.

99 GENERAL AND MISCELLANEOUS↗

Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements

In this report the quantitative determination of the carbon hybridization is critical for establishing processing-structure-properties relationships for carbon-based materials, including amorphous carbon coatings. While several techniques have been employed to characterize the amount of sp 2 and sp 3 carbon in these materials, direct comparisons between analytical results are limited. Here, we compare near edge X-ray absorption fine structure (NEXAFS) spectra of a silicon- and oxygen-containing hydrogenated amorphous carbon (a-C:H:Si:O) coating acquired in synchrotron-based scanning transmission X-ray microscopy (STXM) mode with electron energy loss spectra (EELS) obtained from the same a-C:H:Si:O lamella. While the fractions of sp 2 carbon computed from STXM and EELS spectra are in close agreement, the comparison of NEXAFS spectra acquired in STXM mode with NEXAFS spectra collected in partial electron yield mode on a flat a-C:H:Si:O surface indicated that the destructive preparation of thin lamellae for STXM analyses induces variations in the structure of a-C:H:Si:O, namely the breakage of carbon-silicon and carbon-hydrogen bonds, a change in ordering of sp 2 -bonded carbon, and an increase in the sp 2 carbon fraction. These findings can help scientists in the careful interpretation of spectroscopic results obtained from the analysis of samples made of metastable materials after the destructive preparation of specimens for analytical purposes.

36 MATERIALS SCIENCE↗

Amorphization of nanocrystalline 3C-SiC irradiated with Si+ ions

Irradiation induced amorphization in nanocrystalline and single crystal 3C-SiC has been studied using 1 MeV Si+ ions under the identical irradiation conditions at room temperature and 400 K. The disordering behavior has been characterized using in-situ ion channeling and ex-situ x-ray diffraction methods. The results show that, compared to single crystal 3C-SiC, full amorphization of small 3C-SiC grains (~3.8 nm in size) occurs at a slightly lower dose at room temperature. For grains with sizes of 3.0 - 3.8 nm, the amorphization dose is lower at room temperature than 400 K. A significantly lower dose for amorphization of smaller grains (2.0 nm in size) is observed at 400 K. The behavior has been interpreted based on the competition between the interface and interior amorphization.

amorphization↗

Pressure-induced crystallization of an amorphous martensite alloy

Recently, solid-state amorphization through temperature-induced martensitic transition has been reported. The stability of the amorphous martensite phase, which co-exists with a crystalline counterpart, is intriguing but remains ill-defined. In this work, we studied the structural stability of a Ti 59.1 Zr 37 Cu 2.3 Fe 1.6 amorphous martensite alloy by combining in situ high-pressure synchrotron x-ray diffraction with ex situ transmission electron microscopy. During compression at room temperature, an irreversible pressure-induced crystallization of the amorphous martensite phase into a β-Ti phase is revealed. Qualitative analysis reveals the important role of the local atomic strain in stabilizing/destabilizing amorphous martensite alloys and its high tunability of the local atomic strain under high pressure.

36 MATERIALS SCIENCE↗

Quantitative Phase Analysis of Plasma-Treated High-Silica Materials

The paper presents the X-ray diffraction (XRD) analysis of the crystal structure of SiO{sub 2} in two modifications, namely quartzite and quartz sand before and after plasma treatment. Plasma treatment enables the raw material to melt and evaporate after which the material quenches and condenses to form nanoparticles. The Rietveld refinement method is used to identify the lattice parameters of SiO{sub 2} phases. It is found that after plasma treatment SiO{sub 2} oxides are in the amorphous state, which are modeled within the microcanonical ensemble. Experiments show that amorphous phases are stable, and model X-ray reflection intensities approximate the experimental XRD patterns with fine precision. Within the modeling, full information is obtained for SiO{sub 2} crystalline and amorphous phases, which includes atom arrangement, structural parameters, atomic population of silicon and oxygen atoms in lattice sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing Effects on Microstructure and Magnetic Properties of (NdPr){sub 9.5}(FeNbCoCu){sub 79.5}(BC){sub 11} Nanocomposite Magnets

Annealing effects on microstructure and magnetic properties of (NdPr){sub 9.5}(FeNbCo){sub 79.5}(BC){sub 11} ribbons were investigated. It was observed that Nd{sub 2}Fe{sub 14}B and Fe{sub 3}B phases were directly formed at low spinning speed. Then, the alloys transformed to an amorphous state at a speed of 20 m/s. Annealed at 700 {sup ∘}C for 10 min, the amorphous alloys as-quenched at 20 m/s crystallized into a nanocomposite composed of Nd{sub 2}Fe{sub 14}B and α-Fe phases. The formation of Fe{sub 3}B phases was inhibited. The magnetic properties firstly increased and then decreased with the increasing of annealing time. The optimum magnetic properties were achieved in the alloys annealed at 700 {sup ∘}C for 10 min. The corresponding coercivity, remanence, and the maximum energy product was 427.5 kA/m, 0.94 T, and 101.2 kJ/m{sup 3}, respectively. In addition, fine and uniform grains were formed. The average grain size was 10 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Key Role of the Cation Interstitial Structure in the Radiation Resistance of Pyrochlores

The annealing of the B cation interstitial is shown to drive the thermokinetic of the response to irradiations of A{sub 2}B{sub 2}O{sub 7} pyrochlores. Molecular dynamics simulations evidenced that the annealing of interstitials created by irradiations depends upon the nature of B. As the coordination number of B decreases, the dumbbell interstitial is stabilized at the expense of the isolated interstitial. Unlike the isolated interstitials, the recombination of the dumbbells is thermally activated and hindered at low temperatures. The occurrence of dumbbells drives the structure towards the amorphous state.

36 MATERIALS SCIENCE↗

Laser-Induced Modification of the Surface of Ge{sub 2}Sb{sub 2}Te{sub 5} Thin Films: Phase Changes and Periodic-Structure Formation

Submicron periodic lattices are formed at the surface of phase-change-memory film materials based on the complex chalcogenide Ge{sub 2}Sb{sub 2}Te{sub 5} when exposed to nanosecond laser pulses. The geometric characteristics and structural properties of laser-induced lattices are studied by optical and atomic-force microscopies and Raman spectroscopy. It is shown that, at appropriately chosen parameters of exposure to laser radiation, it is possible to implement periodic modulation of the refractive index in the structures formed. Modulation is due to the postexposure solidification of grating ridges and valleys in different phase states, whose dielectric constants widely differ from each other. In the vicinity of the maxima of the wavy structure, the amorphous state is mainly formed, whereas in the region of minima, the Ge{sub 2}Sb{sub 2}Te{sub 5} structure corresponds mainly to the crystalline phase.

36 MATERIALS SCIENCE↗

Effect of cooling rate on the microstructure and microhardness of the CuZrAgAl alloy

The effect of cooling rate on the microstructure and microhardness of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} (at.%) alloy has been studied. The crystalline phases were characterized by X-ray diffraction, optical microscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy, and identified as AlCu{sub 2}Zr, Cu{sub 10}Zr{sub 7} and CuZr{sub 2}. The solidification sequence was established as following: the Cu{sub 10}Zr{sub 7} phase forms first in the periphery of the rod, then following with AlCu{sub 2}Zr phase in the rod center and finally CuZr{sub 2} crystals in Cu-depleted areas. The effect of crystals on the mechanical properties of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was also estimated through the microhardness. According to the value of microhardness, inhomogeneous structure of the amorphous matrix is more easily formed for the alloy in the low cooling rate (i.e., 9 mm) as compared with the alloy with fully amorphous state in the large cooling rate (i.e., 3 mm). This inhomogeneous structure was attributed to the composition change of amorphous matrix arising from the forming of crystalline phases due to the low cooling rate. - Highlights: Black-Right-Pointing-Pointer The crystalline phases in the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy were identified. Black-Right-Pointing-Pointer The solidification sequence of Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was verified. Black-Right-Pointing-Pointer The softening and hardening of alloy could be observed due to the crystallization.

36 MATERIALS SCIENCE↗

High-pressure structural and elastic properties of Tl₂O₃

The structural properties of Thallium (III) oxide (Tl₂O₃) have been studied both experimentally and theoretically under compression at room temperature. X-ray powder diffraction measurements up to 37.7 GPa have been complemented with ab initio total-energy calculations. The equation of state of Tl₂O₃ has been determined and compared to related compounds. It has been found experimentally that Tl₂O₃ remains in its initial cubic bixbyite-type structure up to 22.0 GPa. At this pressure, the onset of amorphization is observed, being the sample fully amorphous at 25.2 GPa. The sample retains the amorphous state after pressure release. To understand the pressure-induced amorphization process, we have studied theoretically the possible high-pressure phases of Tl₂O₃. Although a phase transition is theoretically predicted at 5.8 GPa to the orthorhombic Rh₂O₂-II-type structure and at 24.2 GPa to the orthorhombic α-Gd₂S₃-type structure, neither of these phases were observed experimentally, probably due to the hindrance of the pressure-driven phase transitions at room temperature. The theoretical study of the elastic behavior of the cubic bixbyite-type structure at high-pressure shows that amorphization above 22 GPa at room temperature might be caused by the mechanical instability of the cubic bixbyite-type structure which is theoretically predicted above 23.5 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural transition, subgap states, and carrier transport in anion-engineered zinc oxynitride nanocrystalline films

In this work, anion alloying is engineered in ZnON nanocrystalline films, and the resultant evolution of the structural transition, subgap states, and carrier transport is investigated. A broad distribution of sub-gap states above the valence band maximum is introduced by nitrogen due to the hybridization of N 2p and O 2p orbitals. The phase transition from partially amorphous states to full crystallinity occurs above a characteristic growth temperature of 100 °C, and the localized states are suppressed greatly due to the reduction of nitrogen composition. The electronic properties are dominated by grain boundary scattering and electron transport across boundary barriers through thermal activation at band edge states at high temperatures. The conductivity below 130 K exhibits a weak temperature dependence, which is a signature of variable-range hopping conduction between localized states introduced by nitrogen incorporation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloy in different structural states

This paper reports the observation of the clear Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} bulk metallic glass. The Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloys in different structural states are also investigated in situ through cyclic thermal dilation tests at different cyclic temperatures. The results show that these Invar effects are strengthened in the relaxation amorphous state, weakened in the nanocrystalline state, and absent in the complete crystalline state. X-ray diffraction and Moessbauer spectroscopy demonstrate that the structural influences on Invar effects can be explained by the different local atomic arrangements around Fe atoms in different structural states.

36 MATERIALS SCIENCE↗

X-Ray Amorphous Sulfur-Bearing Phases in Sedimentary Rocks of Gale Crater, Mars

The Curiosity rover in Gale crater is investigating a mineral transition observed from orbit—an older “clay unit” to a younger “sulfate unit”—hypothesized to reflect the aridification of Mars' climate. Below this transition, the rover detected crystalline Ca-sulfates with minor Fe-sulfates but also found that some fraction of a rock's bulk SO 3 is often in the poorly constrained X-ray amorphous component. Here, we characterize the abundances and compositions of the X-ray amorphous sulfur-bearing phases in 19 drilled samples using a mass balance approach, and in a subset of 5 samples using evolved SO 2 gas measured using the SAM instrument. We find that ∼20–90 wt% of a sample's bulk SO 3 is in the X-ray amorphous state and that X-ray amorphous sulfur-bearing phase compositions are consistent with mixtures of Mg-S, Fe-S, and possibly Ca-S phases, likely sulfates or sulfites. These phases reside in the bedrock, perhaps as cementing agents deposited with detrital sediments or during early diagenesis, and in diagenetic alteration halos deposited after lithification during late diagenesis. The likely presence of highly soluble Mg-sulfates in the rocks suggests negligible fluid flow through the bedrock post-Mg-sulfate deposition. The X-ray amorphous sulfur-bearing phases probably became amorphous through dehydration in the current Martian atmosphere or inside the CheMin instrument. X-ray amorphous sulfur-bearing materials likely contribute to orbital spectral detections of sulfates, and so our results help form multiple hypotheses to be tested in the sulfate unit and are important for understanding the evolution of the Martian surface environment at Gale crater.

R. J. Smith↗