Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTINIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Actinides and Neutron Scattering at the Spallation Neutron Source and High Flux Isotope Reactor

The importance of actinides for science, technology, and medicine is widely recognized and does not require a lengthy introduction. However, the fundamental understanding of actinides and their chemical and physical properties lags behind the knowledge of most other elements in the periodic table. Most actinides (89 ≤ Z ≤ 103) are man-made and were produced in particle accelerators or nuclear reactors in the second half of the 20th century. Although trends in bonding and electronic structure are well characterized and documented across the periodic table, fundamental questions remain regarding the chemistry and physics of the actinides. This lack of knowledge is largely because most isotopes of actinides are intensely radioactive, which greatly increases the difficultly in handling them.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1978

Gas core reactors for actinide transmutation and breeder applications

This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

Clement, J. D.↗
NASA NTRS1980

Laboratory studies of actinide metal-silicate fractionation

Actinide and Sm partition coefficients between silicate melt and several metallic phases have been measured. Under reducing conditions Si, Th, U and Pu can be reduced to metals from silicate melts and alloyed with a platinum-gold alloy. U and Pu enter a molten Pt-Si alloy with roughly equal affinity but U strongly partitions into the solid Pt. Th behaves qualitatively the same as Pu but is much less readily reduced than U, and Sm appears to remain unreduced. Experiments with Fe metal have shown that the partition coefficients of the actinides between Fe and silicate liquid are extremely low, suggesting a very low actinide concentration in planetary cores. Experiments show that platinum metals can efficiently fractionate actinides and fractionate actinides from lanthanides and this process may be relevant to the condensation behavior of these elements from the solar nebula. Pt-metal grains in Allende Ca-Al-rich inclusions appear to be U-poor, although the sub-class of Zr-bearing Pt metals may have high U contents.

Jones, J. H.↗
DOE OSTI2024

Intrinsic Bonding and Reactivity of Actinide Clusters Poster

The effect of electronic structure on chemical bonding and reactivity is one of the most important questions in the field of chemistry. Insight into chemical bond formation involving elements that contain f electrons (i.e., the lanthanides and actinides) is critical for solving specific technical challenges, such as development of advanced nuclear fuel cycles and efficient rare earth separations, as well as a broader understanding of bonding across the entire periodic table. The primary technique for studying the fundamentals of lanthanide and actinide bonding is crystallization of metal-ligand compounds followed by structural determination with X-rays and comparison to theory with computational chemistry. While this procedure has yielded significant insights for a wide variety of elements, it is challenging to apply to the heavier trans-uranic actinides such as berkelium and californium because of limited material availability, significant radioactivity, and poorly understood chemical reactivity of these elements. We hypothesize that by forming actinide-ligand clusters in a mass spectrometer and probing their reactivity in the gas-phase, many of the challenges associated with studying the heavier trans-uranic elements can be circumvented. This project will develop a capability to address a wide range of actinide bonding and reactivity phenomena, increasing Idaho National Laboratory’s capability to address fundamental questions at the forefront of heavy element chemical and molecular science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Preparation of Actinide Targets at Oregon State University

In this paper, we describe the preparation of actinide targets at Oregon State University. The preparation of the actinide fluorides is done by an aqueous precipitation procedure with yields of greater than 90%. A dual glove box system is used for the preparation of the fluorides of the high specific activity actinides and the subsequent vapor deposition. We compare and contrast targets made by vapor deposition and molecular plating. We discuss some new data on the structure of actinide targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sulfur donating extractants for the separation of trivalent actinides and lanthanides

The effective separation of trivalent actinides and lanthanides is capable of reducing the long term radiation hazard associated with used nuclear fuel. Here, this class of separation exploits the tendency of ligands containing large and polarizable soft donor atoms to preferentially bind to the trivalent actinides instead of the lanthanides. Among the soft donors, nitrogen and sulfur based ligands have received the most attention with sulfur donors generally having greater selectivity for the actinides. Herein, the speciation, mechanism, and selectivity for the extraction of lanthanides and actinides from aqueous media into an organic phase by various sulfur containing extractants is reviewed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Trace Actinide Signatures of a Bulk Neptunium Sample

In nuclear forensic analyses, measurements of actinide elements in a sample can assist with identifying interdicted or unknown materials. While these radiochemical signatures have been extensively investigated in uranium materials, less is known about bulk neptunium samples. This paper describes the measurement of trace actinide concentrations and isotopic profiles in a 237 Np oxide sample. Uranium, plutonium, americium, and curium concentrations and isotopic profiles in the sample were determined and deemed potentially useful for distinguishing different sources of 237 Np. Furthermore, several different potential radiochronometry systems were also investigated; discordant results indicate that the Np sample was never completely purified of other actinide elements, or that subsequent contamination of the sample occurred. Few prior studies of neptunium materials have been reported, and these data suggest that trace actinide constituents could provide unique signatures to identify material out of regulatory control.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Ligand–Metal Complementarity in Rare-Earth and Actinide Chemistry

In this article, the rare-earths are comprised of scandium, yttrium, and the lanthanides (atomic numbers 21, 39, and 57–71). (1) While these elements are essential to modern life, they were historically characterized as simple, perhaps dull, compared to the rich multielectron chemistry of d-block metals in catalysts and enzymes. These descriptions were quite fair and largely true at the time that these elements were being discovered and the first compounds containing them were being synthesized, although much progress has been made to overturn this view of the rare earths. Similarly, discussions about actinide chemistry are sometimes limited to research pertinent to the nuclear industry, which, while comprising technologies vital to modern society, does not celebrate the fascinating chemical space that much of the actinide series occupies. These historic characterizations of most of the rare-earth and actinide elements persist in some textbooks, and we acknowledge that it is a helpful place to start; however, altogether these series comprise 32 elements-27% of the 118 known by 2024-and we suggest it would be an unfortunate twist of physics if such a large proportion of the Periodic Table were genuinely dull. Indeed, as this Inorganic Chemistry Forum Issue “Ligand-Metal Complementarity in Rare-Earth and Actinide Chemistry” highlights, the chemistry-let alone the physics, that is, spectroscopy and magnetism-of these elements is rich and depends on ligands!

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bond Dissociation Energies of the Actinide Halides AnX, An = Ac–Lr and X = F–I, Utilizing Relativistic Composite Coupled Cluster Approaches

Bond dissociation energies (BDEs) have been calculated for the set of actinide halides AnX with An=Ac, Pa, and Np-Lr and X=F-I. Two composite thermochemistry methods based on the Feller-Peterson-Dixon (FPD) approach have been utilized, one involving spinor-based relativistic CCSD(T) calculations where spin-orbit (SO) was included at the orbital level and another using scalar relativistic CCSD(T) with a posteriori SO contributions based on 2-component multireference configuration interaction calculations. The method that was chosen for a given actinide halide was based on which representation yielded the best single determinant reference determinant for the coupled cluster calculation. The spinor-based method was chosen for all cases except for AmX, CmX, and BkX. Both composite approaches included contributions accounting for basis set truncation, outer-core correlation, the Gaunt interaction, and QED. The scalar FPD results, as well as the spinor-based calculations for AcF, also included higher order electron correlation up through CCSDT(Q). In addition to BDEs, CCSD(T) equilibrium bond lengths, harmonic frequencies, and vibrational anharmonicity constants are reported for all species. Last, the FPD BDEs for the fluorides were used to confirm the trend across the actinide series previously predicted by Gibson using bonding models based atomic promotion energies that provide a single 6d electron for bonding. In particular the local minimum in the BDEs at AmF is confirmed in the present calculations. Furthermore, the BDEs for LrX are predicted to be slightly larger than those of AcX, making them the largest in the actinide halide series.

Actinides↗
DOE OSTI2025

The balance of orbital overlap and orbital energy in the activation of methane by actinide cations: insights from inductively coupled plasma tandem mass spectrometry

The actinides present a unique challenge to chemical theory. The classical view of covalent bonding is driven by the extent of spatial overlap of valence orbitals. Modern theory has expanded assessments of covalency to include considerations of orbital energy degeneracy to assess orbital energy mixing between metal and ligand valence orbitals. Actinide–ligand (An–L) bonding has more recently been described as a balance between orbital overlap and orbital energy mixing, where 5f and L valence orbital overlap decreases while energy mixing between An 5f and L valence orbitals increases across the series. To test these existing views, we employed inductively coupled plasma tandem mass spectrometry to examine the kinetic energy dependences of reactions of actinide cations, Th + –Am + , with methane. Further, this is the first experimental report of the energy dependences of methane activation reactions involving the cations of Pa, Np, Pu, and Am and the first experimental determination of transuranic An + –D, An + –CD 2 , An + –CD 3 , and An + –CD bond dissociation energies. The correlation of the measured An + –CD 2 bond energies with E p (6d 2 ) indicates that An + 6d orbitals are the dominant contributors in the An + –CD 2 bonds. Close examination of the relative reactivities of An + offers additional support that the balance of classical and modern views of molecular bonding may lie between Np + and Pu + and that the increased reactivity of Th + –Np + may be attributed to the increased spatial extension of the 5f orbitals whereas covalent An + bond formation may be more driven by the decreasing energies of the 5f orbitals across the actinide series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Identifying the speciation of salt-based actinides in the presence of contaminants [Slides]

Molten salt reactors (MSR) present advantages over light water reactors, such as higher safety and energy efficiency, convenient waste processing, and the ability to use more abundant thorium instead of uranium as the fuel source. However, due to the high temperatures associated with these reactors the reactor container corrosion product can have a high influence on the molten salt system, and they are considered as a part of the fuel salt system. It is essential to have a comprehensive understanding of the chemical reactions that are occurring in the molten salt in the presence of contaminants such as nickel, manganese, chromium chlorides and oxides. Because they can change the local structure of these salts and the local structures of these salts govern the thermophysical properties of the molten salts, which would determine the safety and operational parameters of the reactor. This study is focused on identifying f-element materials speciation resulting from reaction with corrosion/degradation products in a molten salt environment to understand the flow of MSR. In this work, f-element chlorides are mixed with alkali and alkali earth metals and corrosion products such as transition metal chlorides are introduced systematically, inside a glovebox. Then these are heated to around 700 ? and slowly cooled to room temperature. Afterwards, these are analyzed using different characterization techniques such as powder X-ray diffraction, UV-vis and Raman spectroscopy and solid-state NMR. The initial work was conducted with lanthanide chlorides as a surrogate for actinides and the acquired data strongly indicates that in the presence of corrosion products new phase formation/ change in coordination environments occurs. This work has been presented at multiple conference presentations. The proposed work would allow to extend this work to actinides (depleted uranium and thorium) and this would assist to identify the speciation of actinide chloride in the presence of corrosion products. Also, this work would open an opportunity to compare the coordination behavior of lanthanides with the actinides.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2023

Actinide Radiation Chemistry and Used Nuclear Fuel Reprocessing

Although the actinides boast many unique physical and chemical properties, their inherent susceptibility to radioactive decay—and subsequent consequences of radiation-induced chemistry—are what make them truly interesting and challenging elements to understand. From a closed nuclear fuel cycle perspective, the ability to predict and control the effects of actinide-driven radiolysis is critical for the design, development, and deployment of advanced used nuclear fuel reprocessing strategies and technologies. The absorption of ionizing radiation from actinide decay leads to the formation of a variety of transient and steady-state radicals, ions, and molecular radiolysis products that can lead to significant changes in a reprocessing solvent system’s physical and chemical properties, which ultimately limits that process’ efficiency and longevity. Presented here is an overview of recent advances in actinide radiation chemistry as it applied to used nuclear fuel reprocessing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Development of Electrochemical Detectors for Elemental Characterization of Actinides - 20563

The characterization of the actinides contained in radioactive waste involves complex and expensive separation processes. Electrochemical methods allow identifying and quantifying quickly and accurately the elementary concentration of actinides such as Th, U, Pu, Am, and Cm in liquid waste. The objective of this research proposal is to build a low-cost portable miniaturized electrochemical detector, which can be an alternative for an initial characterization of actinides in liquid waste. Therefore, this work proposes the use of an electrochemical graphite detector modified with phthalocyanine, to detect and quantify actinides in aqueous media. The electrochemical response of the modified graphite electrodes was performed by cyclic voltammetry, and so the detection and quantification limits for U and Th were determined. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Progress Toward Fast Decay Energy Spectroscopy for Actinide Analysis

Decay energy spectroscopy (DES) is an increasingly popular technique for measuring isotopic composition of actinide samples for nuclear safeguards applications. Current approaches for actinide DES utilize milligram-scale external gold absorbers (> 0.1 nJ/K) that are integrated with actinide samples through mechanical kneading and are thermally connected to microcalorimeters using indium or gold wire bonds. This leads to relatively slow sensor rise time and, consequently, limits counting speed to a few counts per second. We are developing faster metallic magnetic calorimeter-based DES by integrating actinide samples with magnetic sensor materials. This reduces signal rise time and enables high counting speed while maintaining the ability to knead the radioactive source with the absorber. We have measured signal rise time of 0.7 μs with a 1.5 mg external gold absorber using this approach. Here, we also demonstrated online DES operation using an Ortec DSPEC 50, a commercially available data acquisition system developed for semiconductor detectors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Characterization of a minor actinides bearing metallic fuel pin irradiated in EBR-II

The X501 transmutation experiment irradiated in Experimental Breeder Reactor II (EBR-II) was intended to evaluate the safety and performance of the addition of minor actinides (Am, Np) into the metallic nuclear fuel system. The irradiation of this experiment is also of paramount importance for comparisons between true fast spectrum irradiations (e.g. EBR-II) and shrouded irradiation capsules performed at the thermal neutron spectrum Idaho National Laboratory Advanced Test Reactor. The X501 experimental fuel pins were irradiated to a peak measured burnup of 6.2% fission per initial heavy metal atom. This paper reports and discusses Postirradiation Examination results for one of two minor actinide bearing pins from the EBR-II X-501 experiment (X501-G591) with a focus on fuel microstructure evolution. Additionally, fuel swelling, fission product distribution, cladding strain, fission gas release, fuel microstructure and fuel cladding chemical interaction were all evaluated. The fission gas release was 79.9% and the microstructure along the fuel pin presented several characteristics very similar to other EBR-II U-Pu-Zr ternary metallic fuel experience. Minor actinides seem to not dramatically affect the overall performance of this candidate transmutation fuel. Scanning Electron Microscopy was also performed and an in-depth characterization of the different regions and phases is presented. Performance data from these irradiations can be used to inform the feasibility of minor actinide transmutation in future reactor systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Actinides in complex reactive media: A combined ab initio molecular dynamics and machine learning analytics study of transuranic ions in molten salts

The predominant ionic chemistry and the similarity in ionic radius of actinides make it very difficult to structurally distinguish them in liquids. In this work, while ab initio molecular dynamics shows that the f-states clearly affects the electronic properties, their impact on structural properties is not obvious. For the series of trivalent actinides U 3+ , Pu 3+ , Cm 3+ , Cf 3+ , Fm 3+ in molten NaCl and FLiBe, actinide ligand bonds have a higher degree of covalency in NaCl (than in FLiBe), and a higher degree of ionicity in FLiBe. Furthermore, a machine learned classification model can distinguish atomic environments of chemically similar actinides, as long as atoms beyond the first solvation shells are considered. Our work shows that only two types of descriptors are necessary to account for all the fluctuations in heavy metal/molten salt mixtures: The first descriptor represents the electronic state of the heavy metal, while the second encompasses the local coordination environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Contrasting Trivalent Lanthanide and Actinide Complexation by Polyoxometalates via Solution-State NMR

Deciphering the solution chemistry and speciation of actinides is inherently difficult due to radioactivity, rarity, and cost constraints, especially for transplutonium elements. In this context, the development of new chelating platforms for actinides and associated spectroscopic techniques is particularly important. In this study, we investigate a relatively overlooked class of chelators for actinide binding, namely, polyoxometalates (POMs). We provide the first NMR measurements on americium–POM and curium–POM complexes, using one-dimensional (1D) 31 P NMR, variable-temperature NMR, and spin-lattice relaxation time (T 1 ) experiments. The proposed POM–NMR approach allows for the study of trivalent f-elements even when only microgram amounts are available and in phosphate-containing solutions where f-elements are typically insoluble. The solution-state speciation of trivalent americium, curium, plus multiple lanthanide ions (La 3+ , Nd 3+ , Sm 3+ , Eu 3+ , Yb 3+ , and Lu 3+ ), in the presence of the model POM ligand PW 11 O 39 7– was elucidated and revealed the concurrent formation of two stable complexes, [M III (PW 11 O 39 )(H 2 O) x ] 4– and [M III (PW 11 O 39 ) 2 ] 11– . Interconversion reaction constants, reaction enthalpies, and reaction entropies were derived from the NMR data. The NMR results also provide experimental evidence of the weakly paramagnetic nature of the Am 3+ and Cm 3+ ions in solution. Furthermore, the study reveals a previously unnoticed periodicity break along the f-element series with the reversal of T 1 relaxation times of the 1:1 and 1:2 complexes and the preferential formation of the long T 1 species for the early lanthanides versus the short T 1 species for the late lanthanides, americium, and curium. Furthermore, given the broad variety of POM ligands that exist, with many of them containing NMR-active nuclei, the combined POM–NMR approach reported here opens a new avenue to investigate difficult-to-study elements such as heavy actinides and other radionuclides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Trends in actinide electronic structure revealed from asymmetric, isostructural transuranic metallocenes

The study of actinide electronic structure and bonding within rigorously controlled environments is fundamental to advancing nuclear applications. Here, we report a new set of isostructural actinide organometallics; An(COT big ) 2 , (An = Th, U, Np, and Pu), where COT big is the bulky 1,4-bis(triphenylsilyl)-substituted cyclooctatetraenyl dianion (1,4-(Ph 3 Si) 2 C 8 H 6 ) 2 -. The actinide(IV) metallocene sandwiches have a clam-shell structure, offering a new molecular symmetry to explore f-orbital contributions in bonding. Combined experimental and computational studies reveal that An(COT big ) 2 complexes strongly differ from the previously published coplanar An(COT) 2 sandwiches due to the bent geometry and electron-withdrawing nature of the substituents. While COT big displays comparatively weaker electron donation, the low-energy f-f transitions in An(COT big ) 2 have increased molar absorptivity consistent with the removal of the parity selection rule and better energetic matching between ligand and actinide 5f orbitals as the series is traversed. For Pu(COT big ) 2 , covalent mixing of donor 5f metal orbitals and the ligand-π orbitals is especially strong.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗