Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACCOUNTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Identifying the location of the OMP separatrix in DIII-D using power accounting

In order to identify reliable scalings for the scrape-off layer (SOL) power width it is necessary to know the location of the separatrix in divertor tokamaks as accurately as possible, specifically its location at the outside midplane (OMP) the standard reference location. Two methods are described which use power accounting to improve the accuracy of identifying the location of the OMP separatrix. The first uses the infrared-measured deposited power profile at the outer target as the primary input, the ' $P_{{\rm SOL}}^{{\rm exhaust}}$ method'. The second uses the measured power input to the SOL, obtained by subtracting the power radiated from inside the separatrix from the total heating power, the ' $P_{{\rm SOL}}^{{\rm input}}$ method'. Furthermore, these two power accounting methods are illustrated with the examples of 21 H-mode DIII-D discharges. High spatial resolution Thomson scattering measured profiles of ne and Te for the main SOL near the OMP are also used as primary input to the analysis; only between-edge localized mode data are used here. The Thomson profiles are used to calculate the electron parallel conducted heat flux profiles which are then matched to the measured $P_{{\rm SOL}}^{{\rm exhaust}}$ and $P_{{\rm SOL}}^{{\rm input}}$ by adjusting the location of the OMP separatrix relative to that of the Thomson data. For these attached discharges, it is found that the values of $R_{{\rm sep}}^{{\rm omp}}$ given by the two power accounting methods agree to within ~1 mm of each other and also to within ~1 mm of the values given by the 'standard DIII-D method' described by Porter et al (1998 Phys. Plasmas 5 1410). Lastly, the shifted $R_{{\rm sep}}^{{\rm omp}}$ results in only modest changes to the values of ne and Te at the OMP separatrix relative to the 'standard' values, increasing $n_{{\rm e}}^{{\rm sep}}$ by 8% and $T_{{\rm e}}^{{\rm sep}}$ by 20%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accounting for partiality in serial crystallography using ray-tracing principles

Serial crystallography generates partial reflections from still diffraction images. Partialities are estimated with EVAL ray-tracing simulations, thereby improving merged reflection data to a similar quality as conventional rotation data. Serial crystallography generates ‘still’ diffraction data sets that are composed of single diffraction images obtained from a large number of crystals arbitrarily oriented in the X-ray beam. Estimation of the reflection partialities, which accounts for the expected observed fractions of diffraction intensities, has so far been problematic. In this paper, a method is derived for modelling the partialities by making use of the ray-tracing diffraction-integration method EVAL. The method estimates partialities based on crystal mosaicity, beam divergence, wavelength dispersion, crystal size and the interference function, accounting for crystallite size. It is shown that modelling of each reflection by a distribution of interference-function weighted rays yields a ‘still’ Lorentz factor. Still data are compared with a conventional rotation data set collected from a single lysozyme crystal. Overall, the presented still integration method improves the data quality markedly. The R factor of the still data compared with the rotation data decreases from 26% using a Monte Carlo approach to 12% after applying the Lorentz correction, to 5.3% when estimating partialities by EVAL and finally to 4.7% after post-refinement. The merging R{sub int} factor of the still data improves from 105 to 56% but remains high. This suggests that the accuracy of the model parameters could be further improved. However, with a multiplicity of around 40 and an R{sub int} of ∼50% the merged still data approximate the quality of the rotation data. The presented integration method suitably accounts for the partiality of the observed intensities in still diffraction data, which is a critical step to improve data quality in serial crystallography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SU-E-J-268: Is It Necessary to Account for Organs at Risk Respiratory Induced Motion Effects in Radiotherapy Planning with Tumor Tracking?

Purpose: The objective of this study was to evaluate the necessity to account for the organs at risk (OARs) respiratory induced motion in addition to the tumor displacement when planning a radiotherapy treatment that accounts for tumor motion. Methods: For 18 lung cancer patients, conformational radiotherapy treatment plans were generated using 3 different CT volumes: the two extreme respiratory phases corresponding to either the full inspiration (plan 1) or expiration (plan 3), as well as a manually deformed phase consisting in full inspiration combined with the full expiration tumor location (plan 2) simulating a tumor tracking plan without addressing OARs motion. Treatment plans were initially created on plan 1 and then transferred to plan 2 and 3 which represent respectively the tumor displacement only and the whole anatomic variations due to breathing. The dose coverage and the dose delivered to the OARs were compared using conformational indexes and generalized equivalent uniform dose. Results: The worst conformational indexes were obtained for plans with all anatomic deformations (Table 1) with an underestimation of the 95% isodose spreading on healthy tissue compared to plans considering the tumor displacement only. Furthermore, mean doses to the OARs when accounting for all the anatomic changes were always higher than those associated with the tumor displacement only: the mean difference between these two plans was 1±1.37 Gy (maximum of 3.8 Gy) for the heart and 1.4±1.42 Gy (maximum of 4.1 Gy) for the lung in which the tumor was located (Figure 1). Conclusion: OARs deformations due to breathing motion should be included in the treatment planning in order to avoid unnecessary OARs dose and/or allow for a tumor dose escalation. This is even more important for treatments like stereotactic radiation therapy which necessitates a high precision ballistic and dose control.

60 APPLIED LIFE SCIENCES↗

Programmatic Value Determination and Termination of Safeguards Process for Accountable Nuclear Materials at the Nevada National Security Site

The Nuclear Material Management & Storage (MNN&S) and the Material Control and Accountability (MC&A) programs at the Nevada National Security Site (NNSS) have the responsibility to ensure accountable nuclear material (NM) no longer need by programs/projects is managed, coordinated, and dispositioned in accordance with DOE Orders 410.2, “Management of Nuclear Materials, and 474.2, “Nuclear Material Control and Accountability”. CD-NMM.007, “Programmatic Value Determination of Nuclear Material and Termination of Safeguards” is the document which lays out the process to fulfill these requirements. This paper defines the roles and responsibilities for all the organizations involved, the programmatic value determination (PVD), disposition planning, and termination of safeguards (ToS)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a 'carbon neutral' flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products. - Highlights: Black-Right-Pointing-Pointer Typical life cycle assessment practice for consumer products often excludes significant land use change emissions when estimating carbon footprints. Black-Right-Pointing-Pointer The article provides a methodology to rescale IPCC guidelines for product-level carbon footprints. Black-Right-Pointing-Pointer Life cycle inventories and product carbon footprint protocols need more comprehensive land use-related accounting. Black-Right-Pointing-Pointer Interdisciplinary collaboration linking the LCA and forest carbon modeling communities is necessary.

54 ENVIRONMENTAL SCIENCES↗

Environmental product declarations in accordance with EN 15804 and EN 16485 — How to account for primary energy of secondary resources?

As a core product category rule (PCR), EN 15804 defines rules for conducting the life cycle assessment (LCA) of building products in the context of environmental product declarations (EPDs). This European standard is complemented by EN 16485, which provides further guidance for specific aspects for the LCA of wood and wood-based construction products. For all life cycle stages under consideration, the renewable and non-renewable primary energy employed for energy generation or material use is accounted for. Furthermore, the inputs and outputs of secondary materials (SM), renewable secondary fuels (RSF) and non-renewable secondary fuels (NRSF) have to be reported. Especially in the end-of life stage as well as in the production stage, the standards do not exactly rule the accounting method of the primary energy contained in SM, RSF and NRSF. As both standards leave room for interpretation, we wrote this discussion article to introduce this issue to the LCA community and to present our developed accounting specifications. In general, we consider EN 15804 and EN 16485 as helpful tools for the LCA of building products. We hope that our ideas on certain aspects contribute to a better understanding of the standards, possibly leading to further improvement in the course of the standardization process.

09 BIOMASS FUELS↗

Assessing direct and indirect emissions of greenhouse gases in road transportation, taking into account the role of uncertainty in the emissions inventory

Highlights: • The use-chain model implemented in this paper is effective in minimizing uncertainty. • Data integration is important to reduce uncertainty. • An innovative metric, Emission Value at Risk, was used to adjust uncertainty values. • Indirect impacts of economic activities change the estimate of GHG emissions. - Abstract: Greenhouse gas (GHG) concentration in the atmosphere has increased since the beginning of the industrial era, with dramatic effects on climate change. Transportation is one of the main sources of GHGs, with more than two-thirds of transport-related GHG emissions attributable to road vehicles. Any policy that aims to reduce GHG emissions needs robust measuring methods that guarantee the quality and reliability of primary data and estimates. However, these estimates are subject to uncertainty, both at the stage of compiling accounting tables and at the stage of using this information to formulate a specific policy question. This paper considers how to reduce uncertainty in estimating GHG emissions from road transportation, with specific reference to a regional emissions inventory in Italy. We propose the application of a use-chain model that can tackle uncertainty in measuring GHG emissions by enhancing the quality of the emissions data registry in the inventory. This new metric, which we call emission value at risk (VaR), draws from methodologies and concepts employed in the insurance and financial sectors. Moreover, additional assessments are performed, integrating the inventory data with those available in the regional energy balance and disaggregated sectoral economic dataset. The results show that a sound accounting method enables uncertainty in emission data to be taken into account, thus improving the design of appropriate strategies to reduce GHG emissions.

54 ENVIRONMENTAL SCIENCES↗

Primary and secondary battery consumption trends in Sweden 1996–2013: Method development and detailed accounting by battery type

Highlights: • Developed MFA method was validated by the national statistics. • Exponential increase of EEE sales leads to increase in integrated battery consumption. • Digital convergence is likely to be a cause for primary batteries consumption decline. • Factors for estimation of integrated batteries in EE are provided. • Sweden reached the collection rates defined by European Union. - Abstract: In this article, a new method based on Material Flow Accounting is proposed to study detailed material flows in battery consumption that can be replicated for other countries. The method uses regularly available statistics on import, industrial production and export of batteries and battery-containing electric and electronic equipment (EEE). To promote method use by other scholars with no access to such data, several empirically results and their trends over time, for different types of batteries occurrence among the EEE types are provided. The information provided by the method can be used to: identify drivers of battery consumption; study the dynamic behavior of battery flows – due to technology development, policies, consumers behavior and infrastructures. The method is exemplified by the study of battery flows in Sweden for years 1996–2013. The batteries were accounted, both in units and weight, as primary and secondary batteries; loose and integrated; by electrochemical composition and share of battery use between different types of EEE. Results show that, despite a fivefold increase in the consumption of rechargeable batteries, they account for only about 14% of total use of portable batteries. Recent increase in digital convergence has resulted in a sharp decline in the consumption of primary batteries, which has now stabilized at a fairly low level. Conversely, the consumption of integrated batteries has increased sharply. In 2013, 61% of the total weight of batteries sold in Sweden was collected, and for the particular case of alkaline manganese dioxide batteries, the value achieved 74%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Carbon Thaw Rate Doubles When Accounting for Subsidence in a Permafrost Warming Experiment

Permafrost soils, which are perennially frozen soils found throughout cold regions, contain vast quantities of carbon and ice. When permafrost thaws, carbon can be lost to the atmosphere, contributing to climate change. This means it is important to track permafrost thaw, which is often done using active layer thickness, or the depth of the seasonally thawed surface layer of soil. However, ice volume can be lost from thawing permafrost, causing the soil surface to drop. Conventional measurements do not account for this surface drop, and the rate of thaw could therefore be underestimated. We found that experimentally warmed soils dropped at a rate of 6 cm year-1, mostly due to loss of ice volume and also due to the loss of soil mass. When accounting for the change in soil surface height over time, the full depth of permafrost thaw was 49% greater. The increased depth of thaw resulted in more than twice as much carbon being thawed as was estimated with standard methods that did not account for subsidence. These findings suggest that permafrost is thawing more quickly than long-term records indicate and that this could result in additional carbon release contributing to climate change.

54 ENVIRONMENTAL SCIENCES↗

Accounting for conformational flexibility and torsional anharmonicity in the H + CH{sub 3}CH{sub 2}OH hydrogen abstraction reactions: A multi-path variational transition state theory study

This work reports a detailed theoretical study of the hydrogen abstraction reactions from ethanol by atomic hydrogen. The calculated thermal rate constants take into account torsional anharmonicity and conformational flexibility, in addition to the variational and tunneling effects. Specifically, the kinetics calculations were performed by using multi-path canonical variational transition state theory with least-action path tunneling corrections, to which we have added the two-dimensional non-separable method to take into account torsional anharmonicity. The multi-path thermal rate constant is expressed as a sum over conformational reaction channels. Each of these channels includes all the transition states that can be reached by internal rotations. The results show that, in the interval of temperatures between 250 and 2500 K, the account for multiple paths leads to higher thermal rate constants with respect to the single path approach, mainly at low and at high temperatures. In addition, torsional anharmonicity enhances the slope of the Arrhenius plot in this range of temperatures. Finally, we show that the incorporation of tunneling into the hydrogen abstraction reactions substantially changes the contribution of each of the transition states to the conformational reaction channel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Power accounting of plasma discharges in the linear device Proto-MPEX

Plasma material interaction (PMI) studies are crucial to the successful development of future fusion reactors. Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a prototype design for the MPEX, a steady-state linear device being developed to study PMI. The primary purpose of Proto-MPEX is developing the plasma heating source concepts for MPEX. A power accounting study of Proto-MPEX works to identify machine operating parameters that could improve its performance, thereby increasing its PMI research capabilities, potentially impacting the MPEX design concept. To build a comprehensive power balance, an analysis of the helicon region has been performed implementing a diagnostic suite and software modeling to identify mechanisms and locations of heat loss from the main plasma. Of the 106.3 kW of input power, up to 90.5% of the power has been accounted for in the helicon region. When the analysis was extended to encompass the device to its end plates, 49.2% of the input power was accounted for and verified diagnostically. Areas requiring further diagnostic analysis are identified. The required improvements will be implemented in future work. The data acquisition and analysis processes will be streamlined to form a working model for future power balance studies of Proto-MPEX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using intrusive approaches as a step towards accounting for stochasticity in wind turbine design

Current wind turbine design methods require tens of thousands of time-domain simulations and use different random seeds to account for the stochasticity of the environmental conditions. The account of stochasticity is nonintrusive because the sampling method calls a deterministic model multiple times without changing its underlying equations. In this work, we investigate and demonstrate using simple proof of concepts how intrusive approaches can be used to directly account for stochasticity in the equations representing a mechanical system. Our long term goal is to apply such methodology to the design of wind turbines without requiring an excessive number of simulations. Intrusive methods manipulate stochastic variables directly to provide the probability density functions (PDFs) of the states and outputs at any time as functions of the PDFs of the inputs. We illustrate how different methods can be used with a reduced-order model of a wind turbine with one degree of freedom and for linear and nonlinear models. We discuss how the methods can be extended and what it will take to apply them to a level of fidelity similar to current state-of-the-art wind turbine design tools.

17 WIND ENERGY↗

Methods to Account for CAP-88 PC-Omitted Nuclides in Radioactive Air Emissions From DOE Facilities

Routine research and development activities at US Department of Energy facilities can result in the release of radioactive emissions, potentially exposing the public and the environment. Such emissions are subject to certain Clean Air Act regulations, specifically those outlined in 40 CFR Part 61, Subpart H, which are enforced by the US Environmental Protection Agency. Compliance is determined in part with a dose standard. Doses to members of the public from most US Department of Energy facility airborne emissions are modeled using CAP-88 PC software, the latest version of which contains more than 1,200 radionuclides. Radioactive effluents from US Department of Energy facilities may contain radioisotopes that are not available in CAP-88 PC, and those radioisotopes must still be evaluated to determine whether doses to members of the public are below established limits. CAP-88 PC-omitted radionuclides can be accounted for using alternate methods, including the use of surrogate radionuclides. Here, this paper elucidates the process of accounting for CAP-88 PC-omitted radionuclides by providing criteria and rationale for surrogate selection, a compilation of surrogate radionuclides used in the past by US Department of Energy facilities, a discussion of alternate methods used to account for CAP-88 PC-omitted radionuclides and a comparison of methods and impacts on receptor doses. Ultimately, this paper aims to aid in the process of surrogate selection and consequently to simplify and expedite compliance with Clean Air Act regulations.

61 RADIATION PROTECTION AND DOSIMETRY↗

Energy Storage Sizing Taking Into Account Forecast Uncertainties and Receding Horizon Operation

Energy storage systems (ESS) have the potential to be very beneficial for applications such as reducing the ramping of generators, peak shaving, and balancing not only the variability introduced by renewable energy sources, but also the uncertainty introduced by errors in their forecasts. Optimal usage of storage may result in reduced generation costs and an increased use of renewable energy. However, optimally sizing these devices is a challenging problem. This paper aims to provide the tools to optimally size an ESS under the assumption that it will be operated under a model predictive control scheme and that the forecast of the renewable energy resources include prediction errors. A two-stage stochastic model predictive control is formulated and solved, where the optimal usage of the storage is simultaneously determined along with the optimal generation outputs and size of the storage. Wind forecast errors are taken into account in the optimization problem via probabilistic constraints for which an analytical form is derived. This allows for the stochastic optimization problem to be solved directly, without using sampling-based approaches, and sizing the storage to account not only for a wide range of potential scenarios, but also for a wide range of potential forecast errors. In the proposed formulation, we account for the fact that errors in the forecast affect how the device is operated later in the horizon and that a receding horizon scheme is used in operation to optimally use the available storage.

25 ENERGY STORAGE↗

MO-E-17A-06: Organ Dose in Abdomen-Pelvis CT: Does TG 111 Equilibrium Dose Concept Better Accounts for KVp Dependence Than Conventional CTDI?

Purpose: In CT imaging, a desirable quality assurance (QA) dose quantity should account for the dose variability across scan parameters and scanner models. Recently, AAPM TG 111 proposed to use equilibrium dose-pitch product, in place of CT dose index (CTDI100), for scan modes involving table translation. The purpose of this work is to investigate whether this new concept better accounts for the kVp dependence of organ dose than the conventional CTDI concept. Methods: The adult reference female extended cardiac-torso (XCAT) phantom was used for this study. A Monte Carlo program developed and validated for a 128-slice CT system (Definition Flash, Siemens Healthcare) was used to simulate organ dose for abdomenpelvis scans at five tube voltages (70, 80, 100, 120, 140 kVp) with a pitch of 0.8 and a detector configuration of 2x64x0.6 mm. The same Monte Carlo program was used to simulate CTDI100 and equilibrium dose-pitch product. For both metrics, the central and peripheral values were used together with helical pitch to calculate a volume-weighted average, i.e., CTDIvol and (Deq)vol, respectively. Results: While other scan parameters were kept constant, organ dose depended strongly on kVp; the coefficient of variation (COV) across the five kVp values ranged between 70–75% for liver, spleen, stomach, pancreas, kidneys, colon, small intestine, bladder, and ovaries, all of which were inside the primary radiation beam. One-way analysis of variance (ANOVA) for the effect of kVp was highly significant (p=3e−30). When organ dose was normalized by CTDIvol, the COV across the five kVp values reduced to 7–16%. The effect of kVp was still highly significant (p=4e−4). When organ dose was normalized by (Deq)vol, the COV further reduced to 4−12%. The effect of kVp was borderline significant (p=0.04). Conclusion: In abdomen-pelvis CT, TG 111 equilibrium dose concept better accounts for kVp dependence than the conventional CTDI. This work is supported by a faculty startup fund from the Cleveland State University.

60 APPLIED LIFE SCIENCES↗

TH-E-BRE-03: A Novel Method to Account for Ion Chamber Volume Averaging Effect in a Commercial Treatment Planning System Through Convolution

Purpose: Fourier-based deconvolution approaches used to eliminate ion chamber volume averaging effect (VAE) suffer from measurement noise. This work aims to investigate a novel method to account for ion chamber VAE through convolution in a commercial treatment planning system (TPS). Methods: Beam profiles of various field sizes and depths of an Elekta Synergy were collected with a finite size ion chamber (CC13) to derive a clinically acceptable beam model for a commercial TPS (Pinnacle{sup 3}), following the vendor-recommended modeling process. The TPS-calculated profiles were then externally convolved with a Gaussian function representing the chamber (σ = chamber radius). The agreement between the convolved profiles and measured profiles was evaluated with a one dimensional Gamma analysis (1%/1mm) as an objective function for optimization. TPS beam model parameters for focal and extra-focal sources were optimized and loaded back into the TPS for new calculation. This process was repeated until the objective function converged using a Simplex optimization method. Planar dose of 30 IMRT beams were calculated with both the clinical and the re-optimized beam models and compared with MapCHEC™ measurements to evaluate the new beam model. Results: After re-optimization, the two orthogonal source sizes for the focal source reduced from 0.20/0.16 cm to 0.01/0.01 cm, which were the minimal allowed values in Pinnacle. No significant change in the parameters for the extra-focal source was observed. With the re-optimized beam model, average Gamma passing rate for the 30 IMRT beams increased from 92.1% to 99.5% with a 3%/3mm criterion and from 82.6% to 97.2% with a 2%/2mm criterion. Conclusion: We proposed a novel method to account for ion chamber VAE in a commercial TPS through convolution. The reoptimized beam model, with VAE accounted for through a reliable and easy-to-implement convolution and optimization approach, outperforms the original beam model in standard IMRT QA verification.

07 ISOTOPE AND RADIATION SOURCES↗

Cluster perturbation theory in Hubbard model exactly taking into account the short-range magnetic order in 2 x 2 cluster

The cluster perturbation theory is presented in the 2D Hubbard model constructed using X operators in the Hubbard-I approximation. The short-range magnetic order is taken into account by dividing the entire lattice into individual 2 x 2 clusters and solving the eigenvalue problem in an individual cluster using exact diagonalization taking into account all excited levels. The case of half-filling taking into account jumps between nearest neighbors is considered. As a result of numerical solution, a shadow zone is discovered in the quasiparticle spectrum. It is also found that a gap in the density of states in the quasiparticle spectrum at zero temperature exists for indefinitely small values of Coulomb repulsion parameter U and increases with this parameter. It is found that the presence of this gap in the spectrum is due to the formation of a short-range antiferromagnetic order. An analysis of the temperature evolution of the density of states shows that the metal-insulator transition occurs continuously. The existence of two characteristic energy scales at finite temperatures is demonstrated, the larger scale is associated with the formation of a pseudogap in the vicinity of the Fermi level, and the smaller scale is associated with the metal-insulator transition temperature. A peak in the density of states at the Fermi level, which is predicted in the dynamic mean field theory in the vicinity of the metal-insulator transition, is not observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Model Cortical Association Fields Account for the Time Course and Dependence on Target Complexity of Human Contour Perception

Can lateral connectivity in the primary visual cortex account for the time dependence and intrinsic task difficulty of human contour detection? To answer this question, we created a synthetic image set that prevents sole reliance on either low-level visual features or high-level context for the detection of target objects. Rendered images consist of smoothly varying, globally aligned contour fragments (amoebas) distributed among groups of randomly rotated fragments (clutter). The time course and accuracy of amoeba detection by humans was measured using a two-alternative forced choice protocol with self-reported confidence and variable image presentation time (20-200 ms), followed by an image mask optimized so as to interrupt visual processing. Measured psychometric functions were well fit by sigmoidal functions with exponential time constants of 30-91 ms, depending on amoeba complexity. Key aspects of the psychophysical experiments were accounted for by a computational network model, in which simulated responses across retinotopic arrays of orientation-selective elements were modulated by cortical association fields, represented as multiplicative kernels computed from the differences in pairwise edge statistics between target and distractor images. Comparing the experimental and the computational results suggests that each iteration of the lateral interactions takes at least 37.5 ms of cortical processing time. Our results provide evidence that cortical association fields between orientation selective elements in early visual areas can account for important temporal and task-dependent aspects of the psychometric curves characterizing human contour perception, with the remaining discrepancies postulated to arise from the influence of higher cortical areas.

59 BASIC BIOLOGICAL SCIENCES↗