Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Near optimum digital phase locked loops.

Near optimum digital phase locked loops are derived utilizing nonlinear estimation theory. Nonlinear approximations are employed to yield realizable loop structures. Baseband equivalent loop gains are derived which under high signal to noise ratio conditions may be calculated off-line. Additional simplifications are made which permit the application of the Kalman filter algorithms to determine the optimum loop filter. Performance is evaluated by a theoretical analysis and by simulation. Theoretical and simulated results are discussed and a comparison to analog results is made.

Polk, D. R.↗

Snow-extent mapping and lake ice studies using ERTS-1 MSS together with NOAA-2 VHRR

Five snow extent maps of the 5,601 sq km American River Basin were prepared using a Zoom Transfer Scope from ERTS-1 MSS band 4 imagery. The maps were generally completed within one hour. A snowmelt curve based on ERTS-1 imagery was used as a calibration standard or comparison for maps prepared from NOAA-2 VHRR imagery in the same manner. Cost comparisons with U-2 derived imagery indicate that ERTS-1 snow mapping of the basins is six times faster. Conservative estimates of comparable aircraft snow survey flights yields a cost figure 200 times that of the ERTS-1 snow map. Snow mapping attempts in the Lake Ontario Basin demonstrated that ERTS-1 is not well suited to large basins. Optimum size of basins for ERTS studies is believed to range from about 250 sq km to 30,000 sq km. The value of the ERTS-1 MSS for Great Lake ice evaluation was proved during the past winter on Lake Erie. Not only were ice features and types of ice identified, but melting ice was detected through the combined use of band 5 and band 7. Ice movement (direction and speed) was mapped by examining imagery from two successive days.

Wiesnet, D. R.↗

Thermal surveillance of active volcanoes using the LANDSAT-1 data collection system. Part 3: Heat discharge from Mount St. Helens, Washington

The author has identified the following significant results. Two thermal anomalies, A at 2740 m altitude on the north slope, and B between 2650 and 2750 m altitude on the southwest slope at the contact of the dacite summit dome of Mount St. Helens, Washington were confirmed by aerial infrared scanner surveys between 1971 and 1973. LANDSAT 1 data collection platform 6166, emplaced at site B anomaly, transmitted 482 sets of temperature values in 1973 and 1974, suitable for estimating the differential radiatin emission as 84 W/sq m, approximately equivalent to the Fourier conductive flux of 89 W/sq m in the upper 15 cm below the surface. The differential geothermal flux, including heat loss via evaporation and convection, was estimated at 376 W/sq m. Total energy yield of Mount St. Helens probably ranges between 0.1 and 0.4 x 10 to the 6th power W.

Friedman, J. D.↗

AgRISTARS: Foreign commodity production forecasting. Minutes of the annual formal project manager's review, including preliminary technical review reports of FY80 experiments

The U.S./Canada wheat/barley exploratory experiment is discussed with emphasis on labeling, machine processing using P1A, and the crop calendar. Classification and the simulated aggregation test used in the U.S. corn/soybean exploratory experiment are also considered. Topics covered regarding the foreign commodity production forecasting project include: (1) the acquisition, handling, and processing of both U.S. and foreign agricultural data, as well as meteorological data. The accuracy assessment methodology, multicrop sampling and aggregation technology development, frame development, the yield project interface, and classification for area estimation are also examined.

Source record↗

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

Comet Encke - Radar detection of nucleus

The nucleus of the periodic comet Encke was detected in November 1980 with the Arecibo Observatory's radar system (wavelength, 12.6 cm). The echoes in the one sense of circular polarization received imply a radar cross section of 1.1 + or - 0.7 sq km. The estimated bandwidth of these echoes combined with an estimate of the rotation vector of Encke yields a radius for the nucleus of 1.5 +2.3 or -1.0. The uncertainties given are dependent primarily on the range of models considered for the comet and for the manner in which its nucleus backscatters radio waves. Should this range prove inadequate, the true value of the radius of the nucleus might lie outside the limits given.

Kamoun, P. G.↗

Rate constant for the reaction between OH and CS2 at 298 and 520 K

In an attempt to resolve discrepancies between published values of the rate constant for the reaction between the hydroxyl radical and carbon disulfide, the reaction has been studied in a discharge flow system by using resonance fluorescence for kinetic measurements and mass spectrometry for product analysis. On the basis of the measured rate constant for disappearance of OH, and measurements of the amount of carbonyl sulfide formed, it was estimated that for the reaction HO + CS2 yields HS + OCS, rate constant values are not greater than 3 x 10 to the -15th/cu cm per sec at 520 K and not greater than 7 x 10 to the -15th/cu cm per sec at 298 K, upper limits are specified because of the inability to isolate exclusively this reaction channel, and because of possible involvement of wall reactions. These results confirm the low values found for this rate constant in two very recent studies.

Leu, M.-T.↗

A dual-processor multi-frequency implementation of the FINDS algorithm

This report presents a parallel processing implementation of the FINDS (Fault Inferring Nonlinear Detection System) algorithm on a dual processor configured target flight computer. First, a filter initialization scheme is presented which allows the no-fail filter (NFF) states to be initialized using the first iteration of the flight data. A modified failure isolation strategy, compatible with the new failure detection strategy reported earlier, is discussed and the performance of the new FDI algorithm is analyzed using flight recorded data from the NASA ATOPS B-737 aircraft in a Microwave Landing System (MLS) environment. The results show that low level MLS, IMU, and IAS sensor failures are detected and isolated instantaneously, while accelerometer and rate gyro failures continue to take comparatively longer to detect and isolate. The parallel implementation is accomplished by partitioning the FINDS algorithm into two parts: one based on the translational dynamics and the other based on the rotational kinematics. Finally, a multi-rate implementation of the algorithm is presented yielding significantly low execution times with acceptable estimation and FDI performance.

Godiwala, Pankaj M.↗

Assessment of measurement error due to sampling perspective in the space-based Doppler lidar wind profiler

A Multipair Algorithm (MPA) has been developed to minimize the contribution of the sampling error in the simulated Doppler lidar wind profiler measurements (due to angular and spatial separation between shots in a shot pair) to the total measurement uncertainty. Idealized wind fields are used as input to the profiling model, and radial wind estimates are passed through the MPA to yield a wind measurement for 300 x 300 sq km areas. The derived divergence fields illustrate the gradient patterns that are particular to the Doppler lidar sampling strategy and perspective.

Houston, S. H.↗

Spatial probing of nebular properties via Bowen pumping

On the basis of detailed calculations of O III line intensities under optically thin and optically thick conditions, an analysis is proposed for spatially resolved observations of the Bowen lines which could yield the local photoexcitation rate and an estimate of the local optical depth, more specifically the local mean escape probability associated with the line of sight. The importance of such newly defined escape probabilities is emphasized. An illustrative application is made to the data of Barker for the planetary nebula NGC 6720. The far-infrared line ratio I (88 microns)/I(52 microns) is also sensitive to Bowen pumping at low optical depths, and interpretation of the ratio may need to take this effect into account in some H II regions. It is noted that the S III far-infrared line ratio could provide an independent check on whether the effect is present.

Bhatia, A. K.↗

Comparison of the quadratic configuration interaction and coupled cluster approaches to electron correlation including the effect of triple excitations

The recently proposed quadratic configuration interaction (QCI) method is compared with the more rigorous coupled cluster (CC) approach for a variety of chemical systems. Some of these systems are well represented by a single-determinant reference function and others are not. The finite order singles and doubles correlation energy, the perturbational triples correlation energy, and a recently devised diagnostic for estimating the importance of multireference effects are considered. The spectroscopic constants of CuH, the equilibrium structure of cis-(NO)2 and the binding energies of Be3, Be4, Mg3, and Mg4 were calculated using both approaches. The diagnostic for estimating multireference character clearly demonstrates that the QCI method becomes less satisfactory than the CC approach as non-dynamical correlation becomes more important, in agreement with a perturbational analysis of the two methods and the numerical estimates of the triple excitation energies they yield. The results for CuH show that the differences between the two methods become more apparent as the chemical systems under investigation becomes more multireference in nature and the QCI results consequently become less reliable. Nonetheless, when the system of interest is dominated by a single reference determinant both QCI and CC give very similar results.

Taylor, Peter R.↗

Volcanism on Venus as inferred from the morphometry of large shields

Morphometric data for the Venusian shields are compared with those for large volcanos on Mars and the Big Island shield in Hawaii. Reasonable assumptions and constraints on the chemical and physical properties of venusian magma, crust, and lithosphere are used with the morphometric data to estimate probable deep magma-source depths below the shields. Such data for selected large volcanos on Venus, Mars, and earth are presented. The flattened profiles of the Venusian shields are interpreted to be predominantly the result of the density contrast between lava and rocks between the source and surface, a relatively shallow depth to a primary magma source, low magma viscosity, high magma volumes and rates, and the inferred presence of flanking vents and lava tubes that carried lavas great distances from the summit. The measured shield heights are used in conjunction with a reasonable range of magma and rock densities to estimate the depths to deep magma sources, yielding an average of 25 km beneath the Venusian plains with a range depth of 3 to 40 km.

Schaber, G. G.↗

Interference effects on Space Station Freedom and Space Shuttle Orbiter Ku-band single access return links

In a Ku-band single access return (KSAR) communication link via the tracking and data relay satellite system (TDRSS), the interference between spacecraft can be discriminated by opposite antenna polarizations, pseudo-noise code, and by TDRSS antenna beam pointing. For the Space Station Freedom (SSF) KSAR and the Space Shuttle Orbiter (SSO) KSAR links, the pseudo-noise coding technique is not exploited. In addition, the two KSAR links use the same carrier frequency. Therefore, if the SSF and SSO are in close proximity, it is expected that mutual interference will be significant. Mutual interference effects on the SSO-KSAR I-channel and the SSF-KSAR links are analytically derived and compared to the simulation results. For the analysis, the channel is assumed ideally bandlimited and linear. It is demonstrated that a simplified (linear bandlimited channel) analytical approach yields results of adequate accuracy in an estimation of the signal degradation by interference.

Kwon, Hyuck M.↗

Near-infrared observations of the Jovian ring and small satellites

The Jovian ring has been observed at 2.2 microns at a near-maximum opening angle of 3.2 deg and a phase angle of 2.2 deg. The 126,100 +/- 500 km ring radius at maximum brightness obtained is compatible with Voyager data at high phase angles. Circular orbital elements have also been obtained for the two small satellites (Metis and Adrastea) associated with the ring. A combination of these orbits with the Voyager imaging-based measurements of Synnott yields a substantial improvement in mean motion estimates.

Nicholson, Philip D.↗

Positrons from supernovae

Positrons are produced in the ejecta of supernovae by the decay of nucleosynthetic Co-56, Ti-44, and Al-26. We calculate the probability that these positrons can survive without annihilating in the supernova ejecta, and we show that enough of these positrons should escape into the interstellar medium to account for the observed diffuse Galactic annihilation radiation. The surviving positrons are carried by the expanding ejecta into the interstellar medium where their annihilation lifetime of 10 exp 5 - 10 exp 6 yr is much longer than the average supernovae occurrence time of about 100 yr. Thus, annihilating positrons from thousands of supernovae throughout the Galaxy produce a steady diffuse flux of annihilation radiation. We further show that combining the calculated positron survival fractions and nucleosynthetic yields for current supernova models with the estimated supernova rates and the observed flux of diffuse Galactic annihilation radiation suggests that the present Galactic rate of Fe-56 nucleosynthesis is about 0.8 +/- 0.6 solar mass per 100 yr.

Chan, Kai-Wing↗

The growth of zeolites A, X and mordenite in space

Zeolites are a class of crystalline aluminosilicate materials that form the backbone of the chemical process industry worldwide. They are used primarily as adsorbents and catalysts and support to a significant extent the positive balance of trade realized by the chemical industry in the United States (around $19 billion in 1991). The magnitude of their efforts can be appreciated when one realizes that since their introduction as 'cracking catalysts' in the early 1960's, they have saved the equivalent of 60 percent of the total oil production from Alaska's North Slope. Thus the performance of zeolite catalysts can have a profound effect on the U.S. economy. It is estimated that a 1 percent increase in yield of the gasoline fraction per barrel of oil would represent a savings of 22 million barrels of crude oil per year, representing a reduction of $400 million in the United States' balance of payments. Thus any activity that results in improvement in zeolite catalyst performance is of significant scientific and industrial interest. In addition, due to their 'stability,' uniformity, and, within limits, their 'engineerable' structures, zeolites are being tested as potential adsorbents to purify gases and liquids at the parts-per-billion levels needed in today's electronic, biomedical, and biotechnology industries and for the environment. Other exotic applications, such as host materials for quantum-confined semiconductor atomic arrays, are also being investigated. Because of the importance of this class of material, extensive efforts have been made to characterize their structures and to understand their nucleation and growth mechanisms, so as to be able to custom-make zeolites for a desired application. To date, both the nucleation mechanics and chemistry (such as what are the 'key' nutrients) are, as yet, still unknown for many, if not all, systems. The problem is compounded because there is usually a 'gel' phase present that is assumed to control the degree of supersaturation, and this gel undergoes a continuous 'polymerization' type reaction during nucleation and growth. Generally, for structure characterization and diffusion studies, which are useful in evaluating zeolites for improving yield in petroleum refining as well as for many of the proposed new applications (e.g., catalytic membranes, molecular electronics, chemical sensors) large zeolites (greater than 100 to 1000 times normal size) with minimum lattice defects are desired. Presently, the lack of understanding of zeolite nucleation and growth precludes the custom design of zeolites for these or other uses. It was hypothesized that the microgravity levels achieved in an orbiting spacecraft could help to isolate the possible effects of natural convection (which affects defect formation) and minimize sedimentation, which occurs since zeolites are twice as dense as the solution from which they are formed. This was expected to promote larger crystals by allowing growing crystals a longer residence time in a high-concentration nutrient field. Thus it was hypothesized that the microgravity environment of Earth orbit would allow the growth of large, more defect-free zeolite crystals in high yield.

Sacco, Albert, Jr.↗

Craters as an Indicator of Martian Regolith Thickness

Two craters (D approx.900 m) found in MOC images of Xanthe Terra have concentric terraced morphologies, where one crater lies within a second, larger crater. This type of morphology has been documented on the Moon and attributed to an impact into fragmental material overlying a more competent substrate. These craters offer a mechanism by which to estimate thickness of unconsolidated surface material over large areas on Mars. Such measurements may constrain deflation rates and volume estimates of hydrologic reservoirs on Mars and yield information on the strength of the local bedrock. Additional information is contained in the original extended abstract.

Gilmore, M. S.↗

Solar Wind Sputtering of Lunar Surface Materials: Role and Some Possible Implications of Potential Sputtering

Solar-wind induced sputtering of the lunar surface includes, in principle, both kinetic and potential sputtering. The role of the latter mechanism, however, in many focused studies has not been properly ascertained due partly to lack of data but can also be attributed to the assertion that the contribution of solar-wind heavy ions to the total sputtering is quite low due to their low number density compared to solar-wind protons. Limited laboratory measurements show marked enhancements in the sputter yields of slow-moving, highly-charged ions impacting oxides. Lunar surface sputtering yields are important as they affect, e.g., estimates of the compositional changes in the lunar surface, its erosion rate, as well as its contribution to the exosphere as well as estimates of hydrogen and water contents. Since the typical range of solar-wind ions at ~1 keV/amu is comparable to the thickness of the amorphous rim found on lunar soil grains, i.e. ~ few 10s nm, lunar simulant samples JSC-1A AGGL are specifically enhanced to have such rims in addition to the other known characteristics of the actual lunar soil particles. However, most, if not all laboratory studies of potential sputtering were carried out in single crystal targets, quite different from the rim s amorphous structure. The effect of this structural difference on the extent of potential sputtering has not, to our knowledge, been investigated to date.

Barghouty, A. F.↗