Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waste conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Thermoelectronic laser energy conversion for power transmission in space

Long distance transmission of power in space by means of laser beams is an attractive concept because of the very narrow beam divergence. Such a system requires efficient means to both generate the laser beam and to convert the light energy in the beam into useful electric output at the receiver. A plasma-type device known as a Thermo-Electronic Laser Energy Converter (TELEC) has been studied as a method of converting a 10.6 micron CO2 laser beam into electric power. In the TELEC process, electromagnetic radiation is absorbed directly in the plasma electrons producing a high electron temperature. The energetic electrons diffuse out of the plasma striking two electrodes with different areas. Since more electrons are collected by the larger electrode there is a net transport of current, and an EMF is generated in the external circuit. The smaller electrode functions as an electron emitter to provide continuity of the current. Waste heat is rejected from the large electrode. A design for a TELEC system with an input 1 MW laser beam was developed as part of the study. The calculated performance of the system showed an overall efficiency of about 42%.

Britt, E. J.↗
DOE OSTI2020

Advanced Gas Turbine and sCO 2 Combined Cycle Power System (Final Report)

The team of Southwest Research Institute (SwRI), Hanwha Power Systems Americas (HPSA), and Solar Turbines Incorporated (Solar) has worked to develop a modular, highly efficient combined-cycle power system consisting of a supercritical carbon dioxide (sCO 2 )-based waste-heat recovery system (WHRS) coupled to a Solar Titan 130 gas turbine (GT). During Phase 1 of the project, the project team used advanced thermodynamic cycle and techno-economic modeling to find an optimal sCO 2 WHRS bottoming cycle and machinery configuration for a Solar Titan 130. In addition to this, a conceptual design of the machinery and overall system layout was created and technology gaps were identified.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS2004

Power Conversion with a Stirling Cycle for Venus Surface Mission

The light-filtering characteristic of the dense, mostly-CO2 atmosphere of Venus, combined with the high atmospheric cloud cover, relegates the surface mission use of photovoltaic power systems and beckons for the independence and reliability of a nuclear-powered energy source. A multi-faceted Venus mission study was completed at NASA GRC in December of 2003 that resulted in the preliminary design of a helium- charged, kinematic Stirling converter, which is powered by nuclear, General Purpose Heat Source (GPHS) modules. The kinematic, Stirling power converter is configured to drive an electronics and sensor cooler in addition to a generator for electrical power. This paper briefly describes the design process and also describes and summarizes key features of the Stirling power converter preliminary design concept. With an estimated total efficiency of 23.4%, the power converter drives the electronics and sensor cooler, and also produces 100 watts of electricity. The converter rejects waste heat at a hot sink temperature of 500 C.

Mellott, Ken↗
NASA NTRS2000

Microreactor System Design for a NASA In Situ Propellant Production Plant on Mars

The NASA In Situ Resource Utilization (ISRU) program is planning near-term missions to Mars that will include chemical processes for converting the carbon dioxide (CO2) and possibly water from the Martian environment to propellants, oxygen, and other useful chemicals. The use of indigenous resources reduces the size and weight of the payloads from Earth significantly, representing enormous cost savings that make human exploration of Mars affordable. Extraterrestrial chemical processing plants will need to be compact, lightweight, highly efficient under reduced gravity, and extraordinarily reliable for long periods. Microchemical and thermal systems represent capability for dramatic reduction in size and weight, while offering high reliability through massive parallelization. In situ propellant production (ISPP), one aspect of the ISRU program, involves collecting and pressurizing atmospheric CO2, conversion reactions, chemical separations, heat exchangers, and cryogenic storage. A preliminary system design of an ISPP plant based on microtechnology has demonstrated significant size, weight, and energy efficiency gains over the current NASA baseline. Energy management is a strong driver for Mars-based processes, not only because energy is a scarce resource, but because heat rejection is problematic; the low pressure environment makes convective heat transfer ineffective. Energy efficiency gains are largely achieved in the microchemical plant through extensive heat recuperation and energy cascading, which has a small size and weight penalty because the added micro heat exchangers are small. This leads to additional size and weight gains by reducing the required area of waste heat radiators. The microtechnology-based ISPP plant is described in detail, including aspects of pinch analysis for optimizing the heat exchanger network. Three options for thermochemical compression Of CO2 from the Martian atmosphere, adsorption, absorption, and cryogenic freezing, are presented, as well as three options for water decomposition, low temperature electrolysis, high temperature electrolysis, and thermochemical decomposition. Other elements of the plant include Sabatier and reverse water gas shift reactors, water recovery, chemical separations, and cryogenic storage. Data are presented supporting preliminary sizing of components, and results of the system design are compared to the existing NASA baseline that is based on conventional technologies.

TeGrotenhuis, W. E.↗
DOE OSTI2023

Chapter Four—MSW characterization and preprocessing for biofuels and bioproducts

The organic fraction of MSW (OFMSW) has a high carbohydrate and lipid content, indicating its good potential as a feedstock for bioethanol and biodiesel production. However, variability in feedstock composition for MSW is a critical challenge for downstream conversion processes such as pyrolysis, gasification, incineration, and biotechnological conversion. MSW characterization is critical to inform and optimize the design of physical handling processes to minimize costs and environmental impacts, and improve the downstream conversion performance of MSW materials. Here, this book chapter focuses on current MSW characterization and preprocessing technologies and discusses the costs, benefits, and environmental impacts associated with MSW preprocessing. Also, the book chapter outlines the potential strategies to increase total revenue and mitigate negative environmental impacts for MSW recycling systems.

09 BIOMASS FUELS↗
DOE OSTI2026

Improved Microalgal Carbon Utilization Efficiency via Integrated CO 2 Electro-Conversion to Formate and Microalgal Sequestration

This project developed a process to convert industrial carbon dioxide (CO 2 ) emissions into high-value, sustainable products through genetically engineered algae cultivation. While traditional microalgae cultivation depends on sparging CO 2 gas through water, this method is often inefficient because much of the gas escapes into the atmosphere before the algae can consume it. To overcome this challenge, the project designed an integrated system that first uses a CO 2 to formic acid electrolyzer to convert CO 2 into water-soluble formic acid/formate, then introduces formic acid/formate into the algae pond for cultivation, which allows the algae to access and utilize nearly all of the provided carbon, greatly increasing the efficiency of carbon utilization. The project team has successfully scaled up the CO 2 to formic acid electrolyzer from lab-scale to 1000 cm² and demonstrated industrially relevant current densities with the scaled-up electrolyzers using a CO 2 source that simulates industrial CO 2 waste.

42 ENGINEERING↗
DOE OSTI2025

Rate Limiting Regimes in Photochemical H2 Generation by Complexes of Colloidal CdS Nanorods and Hydrogenase

Driving redox enzyme catalysis with photoexcited semiconductor nanocrystals is a compelling approach for chemical conversion. We examined how the interplay of the many chemical steps involved determines the rates of photochemical H2 production with complexes of colloidal CdS nanorods and an [FeFe]-hydrogenase. We elucidated the roles of three critical and previously elusive processes-scavenging of photoexcited holes from nanorods, back-electron transfer, and H2 oxidation. Kinetic Monte Carlo simulations and fitting to experimental data revealed that hole transfer becomes the rate-limiting step at high illumination intensities. Comparisons of simulations to experimental H2 production showed that both back-electron transfer and H2 oxidation play an efficiency-limiting role at high catalyst loadings. This work provides guiding principles for tuning experimental parameters to minimize energy-wasting pathways and optimize photochemical product formation. More broadly, we demonstrate how critical but elusive chemical steps in photochemical reactions can be probed with a combination of experiments and simulations.

08 HYDROGEN↗
DOE OSTI2025

Identification and Mitigation of Inhibitory Substances Contained in High-Salinity Crude Glycerol Generated from Biodiesel Production for Polyhydroxyalkanoate Synthesis by Haloferax mediterranei

High-salinity crude glycerol generated from biodiesel production poses significant challenges to microbial valorization due to inhibitory ingredients that severely limit microbial growth. This study identified and mitigated inhibitory substances contained in high-salinity glycerol sludge to enable its conversion to polyhydroxyalkanoates (PHAs) by the extreme halophilic archaeon Haloferax mediterranei. The long-chain fatty acids (LCFAs) were consistently identified as the primary inhibitors by liquid chromatography−mass spectrometry, Fourier transform infrared spectroscopy, and ultraviolet−visible spectroscopy. Acid precipitation at pH 2 efficiently removed these LCFAs, substantially reducing the required feedstock dilution from 23 to 3 times, improving PHA titer by 40%. Furthermore, this dilution reduction also increased the feedstock salinity utilization, achieving a 46% reduction in external salt supplementation for H. mediterranei growth. In contrast, overliming and arrested anaerobic digestion were confirmed to be ineffective in inhibitor removal. This study provides deep insights into inhibitor chemistry and presents acid precipitation as an effective pretreatment strategy for waste valorization of highsalinity crude glycerol.

LC-MS↗
DOE OSTI2022

Antioxidant-induced transformations of a metal-acid hydrocracking catalyst in the deconstruction of polyethylene waste

Plastics are ideal for numerous applications, as driven by the development of complex formulations containing various additives to improve performance and processability. Unfortunately, chemical valorization strategies (e.g., catalytic deconstruction) often can be challenged by the presence of small-molecule additives, and quantification of the impact of these molecular constituents on upcycling processes remains elusive. Here, this dearth of information restricts catalyst design efforts to combine the robustness and performance necessary to improve plastics circularity. In this communication, we describe a systematic study of common plastics additives—phenolic antioxidants, and we quantify the relationship between additive content and deconstruction yields of high-density polyethylene (HDPE) over a platinum on tungstated zirconium (Pt/WO 3 /ZrO 2 ) hydrocracking catalyst. In the simplest case of a base (antioxidant- and slip agent-containing) HDPE resin versus a pure (additive-stripped) HDPE polymer, a two-fold decrease in the yield of gas and liquid products is noted for base HDPE resin. Furthermore, both antioxidant chemistry and concentration strongly impact conversion and individual product selectivities. Using infrared spectroscopy, we determine that antioxidants change the effective ratio of metal to acid sites (i.e., metal-acid balance) through reactions of phenols and/or other functional groups (e.g., acids, esters) with catalyst active sites. Overall, this work demonstrates the impact of one common set of additives on plastics deconstruction, and the analysis herein provides a blueprint for quantitatively assessing the effects of additives on plastics deconstruction processes and for evaluating the development of more robust catalytic strategies or more tolerable additive formulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Achieving high hydrogen productivities of 20 L/L-day via microbial electrolysis of corn stover fermentation products

Microbial electrolysis cells have the potential to generate renewable hydrogen from underused waste streams, however current devices have not reached very large productivity targets using real waste products at any scale. This study used a waste from fermented corn stover known as corn stover fermentation product to reach performance metrics that could be commercialized, if adequately scaled. Average current densities in MECs with mature biofilms reached 17.9 +/- 1.6 A/m 2 at an organic loading rate of 30 grams of chemical oxygen demand per liter of anode volume per day (g/L-day), reaching a maximum current density of 27.2 +/- 2.9 A/m 2 . Hydrogen productivities reached 20.2 +/- 2.0 L of H 2 per L anode volume per day (L/L-day). These represent the highest current densities and highest hydrogen productivities using a complex feedstock in a microbial electrolysis cell. Organic acids and sugars present in untreated substrate were converted at high percentages in MECs, with most above 90% conversion, at organic loading rates of 10, 20, and 30 g/L-day. The effect of periodic high liquid flow rates through the anode on performance was assessed. These tests, called pulsing, showed that hydrogen productivities and current densities increased most dramatically as flow was pulsed every hour at a baseline flow rate of 0.3 mL/min. These productivities show promise for high performance systems, if adequate scale up can be achieved.

09 BIOMASS FUELS↗
DOE OSTI2022

BETO 2021 Peer Review - 1.3.5.270 - Rewiring Algal Carbon Energetics for Renewables (RACER)

Critically needed improvements in biomass and biofuel intermediate productivity can be made by addressing fundamental inefficiencies in algal carbon conversion efficiency (CCE) to biofuel intermediates. Algae photosynthesis is, at best, able to convert 5-7% of incident light energy to biomass, while conversion to fuel intermediates falls 15-25% short of its maximum potential due to inefficiencies along the pathways. Recent progress in the Rewiring Algal Carbon Energetics (RACER) project consortium focused on a means to address the above inefficiencies in a pathway from algal biomass to a trifecta of fuel intermediates, ethanol, 2,3-butane diol, lipids and green biocrude. This project engineered a production-relevant algal species Desmodesmus armatus (SE 00107), to demonstrate biomass productivity improvements, with a doubling of the fuel intermediate yields. The new algae biorefinery paradigm embodied in RACER opens opportunities for algae engineering beyond efforts typically targeted solely at lipid content or improved light harvesting efficiency. Parallel approaches showed improved CCE through elimination of wasted energy during photosynthesis and increased carbon flux to transitory carbohydrate storage in the cells. Outdoor operation and nutrient management strategies with improvements in pretreatment, fermentation and extraction in a Combined Algal Processing approach showed a 40% reduction in MFSP, with a combined biofuel productivity of > 3700 gal/acre.

algal↗
DOE OSTI2022

Lewis acid-assisted reduction of nitrite to nitric and nitrous oxides via the elusive nitrite radical dianion

Reduction of nitrite anions (NO 2 - ) to nitric oxide (NO), nitrous oxide (N 2 O) and ultimately dinitrogen (N 2 ) takes place in a variety of environments, including in the soil as part of the biogeochemical nitrogen cycle and in acidified nuclear waste. Nitrite reduction typically takes place within the coordination sphere of a redox-active transition metal. In this report we show that Lewis acid coordination can substantially modify the reduction potential of this polyoxoanion to allow for its reduction under non-aqueous conditions (-0.74 V versus NHE). Detailed characterization confirms the formation of the borane-capped radical nitrite dianion (NO 2 2- ), which features a N(II) oxidation state. Protonation of the nitrite dianion results in the facile loss of nitric oxide (NO), whereas its reaction with NO results in disproportionation to nitrous oxide (N 2 O) and nitrite (NO 2 - ). This system connects three redox levels in the global nitrogen cycle and provides fundamental insights into the conversion of NO 2 - to NO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Closed-loop Habitation Air Revitalization Model for Regenerative Life Support Systems

The primary function of any life support system is to keep the crew alive by providing breathable air, potable water, edible food, and for disposal of waste. In a well-balanced or regenerative life support system, the various components are each using what is available and producing what is needed by other components so that there will always be enough chemicals in the form in which they are needed. Humans are not just users, but also one of the participating parts of the system. If a system could continuously recycle the original chemicals, this would make it virtually a Closed-loop Habitation (CH). Some difficulties in trying to create a miniature version of a CH are briefly discussed. In a miniature CH, a minimal structure must be provided and the difference must be made up by artificial parts such as physicochemical systems that perform the conversions that the Earth can achieve naturally. To study the interactions of these parts, a computer model was designed that simulates a miniature CH with emphasis on the air revitalization part. It is called the Closed-loop Habitation Air Revitalization Model (CHARM).

Hart, Maxwell M.↗
DOE OSTI2026

Integrating CO2 Electrolysis with Gas Fermentation to Produce Valuable Fuels and Chemicals

Many industrial activities squander CO2, decreasing process yield. We envision a future where this waste carbon is instead captured, upgraded, and valorized directly at the point of emission. Within the CO2 Reduction and Upgrading Consortium (a collaboration of seven US national laboratories and industrial partners), we are pursuing this goal by developing and de-risking new technologies for low temperature CO2 electrolysis, coupled with biological upgrading of intermediates into more valuable compounds. One such process involves electrocatalytic reduction of CO2 to generate carbon monoxide (CO). As both a carbon and energy source, CO represents an attractive feedstock for microbial upgrading by certain syngas-fermenting species, such as the autotrophic bacterium Clostridium autoethanogenum. Our team has developed new genetic tools and optimized cultivation techniques to enhance C. autoethanogenum as a platform host for the biological conversion of syngas into value-added products. For example, we have created novel CRISPR-based genetic engineering techniques to build new, genome-reduced, platform strains of C. autoethanogenum with improved growth rates. Further, we ve introduced heterologous biochemical pathways into C. autoethanogenum to enable the production of high-value compounds from syngas, such as the isoprenoid precursor mevalonic acid. With the tools of electrochemistry and synthetic biology, there is virtually no limit to the spectrum of products that could be sustainably manufactured from CO2.

09 BIOMASS FUELS↗
DOE OSTI2020

Universal free-energy landscape produces efficient and reversible electron bifurcation

For decades, it was unknown how electron-bifurcating systems in nature prevented energy-wasting short-circuiting reactions that have large driving forces, so synthetic electron-bifurcating molecular machines could not be designed and built. The underpinning free-energy landscapes for electron bifurcation were also enigmatic. We predict that a simple and universal free-energy landscape enables electron bifurcation, and we show that it enables high-efficiency bifurcation with limited short-circuiting (the EB scheme). The landscape relies on steep free-energy slopes in the two redox branches to insulate against short-circuiting using an electron occupancy blockade effect, without relying on nuanced changes in the microscopic rate constants for the short-circuiting reactions. The EB scheme thus unifies a body of observations on biological catalysis and energy conversion, and the scheme provides a blueprint to guide future campaigns to establish synthetic electron bifurcation machines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Aqueous buffer solution-induced crystallization competes with enzymatic depolymerization of pre-treated post-consumer poly (ethylene terephthalate) waste

In this paper, the complex relationship between kinetics and substrate morphology during enzymatic depolymerization of melt processed poly(ethylene terephthalate) (PET) is explored and the effects of competing transformations are analyzed. Extruded PET substrates from post-consumer recycled PET (RPET) bottles flakes subjected to enzymatic depolymerization are examined to reveal increases in crystallinity from ~10% post-extrusion to >30% after 3 days of depolymerization as well as increases in glass transition temperature (T g ) from ~66°C to > 80°C. Further investigation into this behavior shows that post-extrusion RPET substrates do not exhibit changes in crystallinity when subjected to dry annealing at 65°C in an oven over 7 days, but they do experience annealing in depolymerization buffer solution with no enzymes at 65°C within 3 days. This difference may be attributed to plasticization of PET in the presence of water, also known as solvent induced crystallization. The impact of this plasticized annealing behavior is demonstrated by subjecting RPET substrates to increasing enzyme-to-substrate loads. As enzyme load increases, overall conversion of substrates increases despite crystallinity also increasing to similar levels regardless of the initial enzyme loading. The competition between depolymerization and crystallization suggests that the rate at which PET substrates are depolymerized at the operational temperature is integral to achieving high conversion to monomeric product. This, in turn, also suggests that savings from lowered enzyme loadings may be more detrimental than helpful in pursuing the most cost-effective recycling systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

FY21 Progress Report: SRNL Analysis of ICCWR LCM and WAMS data for Corrosion and Cracking

The development of algorithms for machine learning and data analysis for the 3013 Surveillance Program is a collaborative effort by the Savannah River National Laboratory (SRNL) and the University of South Carolina (USC). For corrosion detection, Laser Confocal Microscope (LCM) or Wide Area 3D Measurement System (WAMS) data is extracted from large binary files, with software written to convert the data to physical attributes (e.g., height, color and grayscale values; all as functions of a location in a plane projection). A user-friendly Matlab Graphical User Interface (GUI) that reads data from either LCM or WAMS files was developed to integrate input data with software developed for processing and evaluation. The GUI can selectively download binary data, interrogate data attributes, label data, flag significant features, execute Machine Learning (ML) algorithms, output parameters for trained ML algorithms, report ML model accuracy with respect to labeled data, and generate graphical representations for various analyses. Features can be called out by user-specified thresholds, manual labeling or machine learning algorithms when they have been completed. The ability to rapidly label data is important because of the volume of data required for training machine learning algorithms. The GUI has the flexibility to allow addition of improved ML algorithms, methods for data visualization, and statistical computations. Statistical analyses via the GUI include areas of pits within a defined range of pit depths, correlations between Red-Green-Blue (RGB) or grayscale intensity and relative surface height, covariances between values associated with features, and feature histograms. The development of supervised machine learning algorithms, however, has been hindered by a lack of training data. The machine learning algorithms for crack identification are being refined but require improvements to the true positive rate for crack detection. This shortcoming is an artifact of the limited training data currently available, perhaps more so than the structure of the neural networks. At present, the best results are had from a consensus over an ensemble of randomly generated Deep Neural Network (DNN) or Convolutional Neural Network (CNN) algorithms. Although the consensus accuracy method has yielded optimum true positive and true negative rates in excess of 80%, additional validation testing is necessary. In addition to the suite of LCM data that was initially used, and which represents the majority of the work presented in this report, WAMS image data was also reviewed at a preliminary level. The review included a comparison between image resolution and dynamic range for each method. WAMS (ZON file) image data was found to have a pixel pitch of 3.69μm compared to 1 μm for the LCM (vk4 file) data, which implies a lower resolution for the WAMS images. Conversely, the ratio of dynamic range of the WAMS data to the LCM data was approximately 41:20 for height data, suggesting that information from WAMS should more accurately determine the depth of pits. At present, the significance of the greater dynamic range of the WAMS data relative to the LCM data has not yet been evaluated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2005

Control of Effluent Gases from Solid Waste Processing Using Carbon Nanotubes

One of the major problems associated with solid waste processing technologies is the release of effluent gases and contaminants that are in gaseous formed from the processes. A number of other gases, in particular NO(x), SO2, NH3, Hydrocarbons (e.g. CH4) do present hazards to the crew in space habitats. Reduction of mass, power, volume and resupply can be achieved by using catalyst impregnated carbon nanotubes as compared to other catalytic systems. The development and characterization of an innovative approach for the control and elimination of gaseous toxins using single walled carbon nanotubes (SWNTs) promise superior performance over conventional approaches. This is due to the ability to direct the selective uptake of gaseous species based on their controllable pore size, high adsorptive capacity and the effectiveness of carbon nanotubes as catalyst supports for gaseous conversion. For example, SWNTs have high adsorptive capacity for NO and the adsorbed NO can be decomposed to N2 and O2 . Experimental results showing the decomposition of NO on metal impregnated carbon nanotubes is presented. Equivalent System Mass (ESM) comparisons are made of the existing TCCS systems with the carbon nanotube technology for removing NO(x). The potential for methane decomposition using carbon nanotubes catalysts is also discussed.

Fisher, John↗