Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “volatilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Volatility Studies of Lanthanide Hexafluoroacetylacetone Chelates

Nuclear forensics has become very important to the field of nuclear security, where there is considerable interest in developing rapid separations of radionuclides and isotopes. Although prevention and detection form the foundation of nuclear security science, in the unfortunate event of detonation of a nuclear device, the fallout debris can be analyzed for signature isotopes that may provide evidence on the origin and type of nuclear materials. This is of considerable political importance to many governing bodies and this information is desired in a timely manner. One method of analysis is the rapid gas phase separation of rare earth metals from other components of the debris via isothermal thermochromatography. Lanthanides cover a portion of the fission product curve with varying yields dependent on a number of variables (e.g. neutron energy, fissile parent, etc), motivating the chromatographic separation of these elements. In previous work, 1,1,1,5,5,5 - hexafluoroacetylacetone (hfac) has been shown to produce volatile complexes with lanthanides. Thermochromatography is a gas phase separation method that utilizes temperature gradients on a column to vary adsorption location or constant column temperatures to vary retention time. The adsorption time of a compound on a column, i.e. retention time, is dependent on the thermodynamics, most notably the adsorption enthalpy. Studies of heavy metals have generated empirical correlations between adsorption enthalpy on a quartz column and sublimation enthalpy of the solid material. Thermogravimetric analysis (TGA) is useful in the characterization of the thermodynamics of materials, especially the sublimation enthalpy. Many methods analyze weight loss curves as a function of a constant heating rate. Another method introduced by Ashcroft analyzes weight loss curves over isothermal heating regions. Work presented here focuses on the determination of the sublimation enthalpies of thirteen lanthanide hfac complexes via the latter method. Additionally, there is investigation into the degradation of the compound via constant heating TGA up to higher temperatures. This provides information on the onset and end-set temperatures of degradation stages, as well as the peak temperature at which total sublimation occurs. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emissions of Volatile Particulate Components from Turboshaft Engines running JP-8 and Fischer-Tropsch Fuels

Rotating-wing aircraft or helicopters are heavily used by the US military and also a wide range of commercial applications around the world, but emissions data for this class of engines are limited. In this study, we focus on emissions from T700-GE-700 and T700-GE-701C engines; T700 engine was run with military JP-8 and T701C run with both JP-8 and Fischer-Tropsch (FT) fuels. Each engine was run at three engine power settings from the idle to maximum power in sequence. Exhaust particles measured at the engine exhaust plane (EEP) have a peak mobility diameter less than 50nm in all engine power settings. At a 4-m downstream location, sulfate/sulfur measurements indicate all particulate sulfur exists practically as sulfate, and the particulate sulfur and sulfate contents increased as the engine power increased. The conversion of sulfur to sulfate was found not to be dependent on engine power setting. Analysis also showed that conversion of sulfur to sulfate was not by the adsorption of sulfur dioxide gas on the soot particles and then subsequently oxidized to form sulfate, but by gas-phase conversion of SO2 via OH or O then subsequently forming H2SO4 and condensing on soot particles. Without the sulfur and aromatic components, use of the FT fuel led to significant reduction of soot emissions as compared to that of the JP-8 fuel producing less number of particles than that of the JP-8 fuel; however, the FT fuel produced much higher number concentrations of particles smaller than 7nm than that of JP-8 in all engine power settings. This indicates non-aromatics components in the FT fuel could have contributed to the enhancement of emissions of particles smaller than 7nm. These small particles are volatile, not observed at the EEP, and may be important in playing a role for the formation of secondary particles in the atmosphere or serving as a site for effective cloud nuclei condensation to occur.

54 ENVIRONMENTAL SCIENCES↗

Airborne flux measurements of methane and volatile organic compounds over the Haynesville and Marcellus shale gas production regions

Emissions of methane (CH4) and volatile organic compounds (VOCs) from oil and gas production may have large impacts on air quality and climate change. Methane and VOCs were measured over the Haynesville and Marcellus shale gas plays on board the National Center for Atmospheric Research C-130 and NOAA WP-3D research aircraft in June–July of 2013. We used an eddy covariance technique to measure in situ fluxes of CH4 and benzene from both C-130 flights with high-resolution data (10?Hz) and WP-3D flights with low-resolution data (1?Hz). Correlation (R?=?0.65) between CH4 and benzene fluxes was observed when flying over shale gas operations, and the enhancement ratio of fluxes was consistent with the corresponding concentration observations. Fluxes calculated by the eddy covariance method show agreement with a mass balance approach within their combined uncertainties. In general, CH4 fluxes in the shale gas regions follow a lognormal distribution, with some deviations for relatively large fluxes (>10?µg?m-2?s-1). Statistical analysis of the fluxes shows that a small number of facilities (i.e., ~10%) are responsible for up to ~40% of the total CH4 emissions in the two regions. We show that the airborne eddy covariance method can also be applied in some circumstances when meteorological conditions do not favor application of the mass balance method. We suggest that the airborne eddy covariance method is a reliable alternative and complementary analysis method to estimate emissions from oil and gas extraction.

Yuan, Bin↗

Solution-Processed Nanoporous Organic Semiconductor Thin Films: Toward Health and Environmental Monitoring of Volatile Markers

Porous materials are ubiquitous in nature and have found a wide range of applications because of their unique absorption, optical, mechanical, and catalytic properties. Large surface-area-to-volume ratio is deemed a key factor contributing to their catalytic properties. Here, it is shown that introducing tunable nanopores (50–700 nm) to organic semiconductor thin films enhances their reactivity with volatile organic compounds by up to an order of magnitude, while the surface-area-to-volume ratio is almost unchanged. Mechanistic investigations show that nanopores grant direct access to the highly reactive sites otherwise buried in the conductive channel of the transistor. The high reactivity of nanoporous organic field-effect transistors leads to unprecedented ultrasensitive, ultrafast, selective chemical sensing below the 1 ppb level on a hundred millisecond time scale, enabling a wide range of health and environmental applications. Flexible sensor chip for monitoring breath ammonia is further demonstrated; this is a potential biomarker for chronic kidney disease.

36 MATERIALS SCIENCE↗

Combined effects of lipase and Lactiplantibacillus plantarum 1‐24‐LJ on physicochemical property, microbial succession and volatile compounds formation in fermented fish product

Abstract BACKGROUND Studies have shown that either the addition of starter culture or enzyme can improve fermentation in fish or other products. However, little research has been carried out on the effects of coupling starter cultures with lipase on the microbial community and product quality. Suanzhayu is a Chinese fermented fish product that mainly relies on spontaneous fermentation, resulting in an unstable flavor and quality. The present study investigated the impact of lipase and Lactiplantibacillus plantarum 1‐24‐LJ on the quality of Suanzhayu . RESULTS Inoculation decreased pH and 2‐thiobarbituric acid reactive substances (TBARS) values, and also helped the dominance of the strain in the ecosystem, whereas lipase addition raised TBARS values and had little effect on pH, water activity ( a w ) and microbiota. The addition of lipase and/or Lpb. plantarum increased the content of alcohols, aldehydes, ketones, esters and umami amino acids. The co‐additions with the most significant effect and the total contents of volatile compounds (VCs) and free amino acids (FAAs) were 1801.92 g per 100 g and 21 357.05 mg per 100 g, respectively. Former‐ Lactobacillus was negatively correlated with pH, a w and Prevotella , but positively with VCs (ethyl ester of heptanoic acid, ethyl ester of octanoic acid) and FAAs (Tyr, Phe). Furthermore, adding Lpb. plantarum 1‐24‐LJ alone or in combination with lipase shortened the fermentation process. CONCLUSION The present study provides a recommended Suanzhayu process approach for improving product quality and flavor, as well as shortening fermentation time, by adding Lpb. plantarum 1‐24‐LJ with or without lipase. © 2023 Society of Chemical Industry.

Zhang, Zuoli↗

Design of an Online Electrochemical Mass Spectrometry System to Study Gas Evolution from Cells with Lean and Volatile Electrolytes

Gas evolution in high-energy Li-ion batteries remains a pervasive problem for a multitude of chemistries, jeopardizing the electrochemical performance and safety for consumers of electric vehicles. Many electrode–electrolyte degradation processes evolve gasses that may be detected in-situ with online electrochemical mass spectrometry (OEMS). In this work, details are provided for the setup and validation of an OEMS system that operates well under lean and volatile electrolyte conditions. Quite notably, the OEMS cells with only 40 µL of electrolyte and intermittent headspace sampling exhibit comparable electrochemical performance to flooded coin-cells. It is demonstrated that the onset time, shape, and magnitude of the gas evolution profiles calculated from mass spectrometer measurements match well to a known pressure reference through the use of an empirically determined fraction of removal. The off-gassing characteristics from a set of layered-oxide materials, NMC532, NMC811, and LNO, are used to further validate the OEMS setup against the literature. It is shown that many of the features present in the OEMS curves for equivalent systems from other groups are captured by this OEMS system. Finally, at an upper cut-off voltage of 4.4 V, LNO exhibits an intense release of CO 2 , O 2 , and CO gas relative to NMC532 and NMC811.

25 ENERGY STORAGE↗

Fluorinated ionic liquids as gas chromatographic stationary phases for the separation of volatile per- and polyfluoroalkyl substances

Background Here, the production of fluorinated organic compounds in the manufacturing, semiconductor, and pharmaceutical industries has increased exponentially over the past decade. This rapid growth has created an urgent need for efficient chromatographic platforms capable of selectively separating these compounds from complex mixtures, not only to support industrial quality control and waste management practices, but also to enable reliable environmental monitoring of volatile fluorinated contaminants. Conventional GC stationary phases lack the fluorophilic interactions needed for highly fluorinated analytes. Consequently, there is a clear demand for specialized stationary phases designed to improve chromatographic retention and selectivity for these compounds. Results Three stationary phases composed of fluorinated ionic liquids (ILs) with varied extent of fluorination were prepared to study fluorophilic interactions with fluorinated/non-fluorinated probe molecules by gas chromatography (GC). IL stationary phases featuring linear and branched perfluoroalkyl moieties, as well as a branched alkyl moiety, were systematically investigated. Chromatographic performance was examined using fluorinated compounds and their hydrocarbon analogs, including CF 3 -substituted aromatics, aliphatic alcohols, fluorotelomer alcohols (FTOHs), and perfluoroalkenes. Measurements on 5 m and 20 m columns revealed that the IL possessing branched alkyl provided stronger dispersive and hydrogen bonding interactions toward non-fluorinated aromatic and long-chain alcohols, whereas the fluorinated ILs enhanced retention of highly fluorinated FTOHs and perfluorodecene. Comprehensive two-dimensional GC (GC × GC), using a nonpolar primary column coupled with secondary columns featuring cross-bonded poly(trifluoropropylmethyl siloxane) (Rtx-200 ms), the branched fluorinated IL, or the branched non-fluorinated IL, highlighted complementary selectivity with the branched fluorinated IL providing the strongest interactions with fluorinated analytes. Significance These results demonstrate that fluorinated IL stationary phases are promising alternatives to conventional polysiloxane stationary phases for improving the separation of per- and polyfluoroalkyl substances and related fluorinated compounds. By correlating IL structure with fluorophilic interactions, this work establishes design principles for GC stationary phases that enable enhanced selectivity for highly fluorinated analytes while maintaining complementary interactions with non-fluorinated compounds.

Comprehensive two-dimensional GC↗

Climate-driven trends of biogenic volatile organic compound emissions and their impacts on summertime ozone and secondary organic aerosol in China in the 2050s

As a precursor of ozone (03) and secondaty organic aerosol (SOA), volatile organic compounds (VOCs) largely derive from natural sources, which may va1y with future climate change patterns. In this study, the emissions and impacts of biogenic VOCs (BVOCs) were projected into summertime of the 2050s (average for 2048-2052) for China using the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and the Community Multiscale Air Quality Model (CMAQ) driven by future meteorological fields simulated with the Weather Research and Forecasting Model (WRF) for two future climate scenarios (RCP4.5 and RCP8.5). Sutface temperatures were projected to increase by 0.18 K yr 1 and 0.34 K yr 1 under RCP4.5 and RCP8.5, respectively. Such increases in future surface temperatures will increase BVOC emissions, as emissions of isoprene and monoterpene (ac­counting for 77.73% of all BVOCs in China at the current time) are projected to increase by 11.13% and 25.20% under the two RCP scenarios in the 2050s, respectively. Consequently, such increases in BVOCs will also have considerable impacts on concentrations of 03 and SOA. BVOCs contribute 10.11% of 03 and 62.59% of SOA concentrations in eastern China at current time. Under the RCP8.5 scenario, climate-driven BVOC changes will enhance 03 and SOA concentrations by 0.90% and 7.33% in eastern China from ClUTent to the 2050s and account for 31.83% and 52.80% of total 03 and SOA changes, respectively, on average across five typical regions. Such increases in 03 and SOA concentrations resulting from climate-driven BVOC changes decline considerably under the RCP4.5 scenario to less than 0.80% and 6.50%, respectively, implying that climate mitigation can facilitate air pollution control by alleviating an increase in BVOCs.

Liu, Song↗

Air quality impacts from the development of unconventional oil and gas well pads: Air toxics and other volatile organic compounds

Unconventional oil and natural gas development (UOGD) has expanded rapidly across the United States in recent decades and raised concerns about associated air quality impacts. While significant effort has been made to quantify methane emissions, relatively few observations have been made of Volatile Organic Compounds (VOCs), especially during drilling and completion of new wells. Extensive air monitoring during development of several large, multi-well pads in Broomfield, Colorado, in the Denver-Julesburg Basin, provides a novel opportunity to examine changes in local air toxics and other VOC concentrations during well drilling and completions and production. These operations offer an especially useful case to study as several management practices were implemented to reduce emissions (e.g., electrified, grid-powered drill rigs and closed loop fluid handling systems to reduce truck traffic and limit fluid handling on the pad). With simultaneous measurements of methane and 50 VOCs from October 2018 to December 2022 at as many as 19 sites near well pads, in adjacent neighborhoods, and at a more distant reference location, we identify impacts from each phase of well development and production. Use of weekly, time-integrated canisters, a Proton Transfer Reaction Mass Spectrometer (PTR-MS), continuous photoionization detectors (PID) to trigger canister collection upon detection of VOC-rich plumes, and an instrumented vehicle, provided a powerful suite of measurements to characterize both transient plumes and longer-term changes in air quality. Prior to the start of well development, VOC gradients were small across Broomfield. Once drilling commenced, concentrations of oil and gas (O&G) related VOCs, including alkanes and aromatics, increased around active well pads. Concentration increases were clearly apparent during certain operations, including drilling, coil tubing/millout operations, and production tubing installation. Emissions of C 8 –C 10 n-alkanes during drilling operations highlighted the importance of VOC emissions from synthetic drilling mud chosen to reduce odor impacts. More than 90 samples were collected of transient plumes. Using composition measurements, meteorological data, and information about well pad activities, these plumes were connected with specific UOGD operations including drilling, flowback, and production equipment maintenance. The chemical signatures of these plumes differed by operation type (e.g., C 8 –C 10 n-alkanes constituted a larger fraction of measured VOCs in drilling-related plumes). Concentrations of individual, oil and gas-related VOCs in these plumes were often several orders of magnitude higher than in background air, with maximum ethane and benzene concentrations of 79,600 and 819 ppbv, respectively. Because these plumes typically impact a monitoring site for just several minutes, they are easily missed by slower-responding instruments. Study measurements highlight future emission mitigation opportunities during UOGD operations, including better control of emissions from shakers that separate drill cuttings from drilling mud, production separator maintenance operations, and periodic emptying of sand cans during flowback operations.

54 ENVIRONMENTAL SCIENCES↗

Green leaf volatile-burst in Arabidopsis is governed by galactolipid oxygenation by a lipoxygenase that is under control of calcium ion

Plants form green leaf volatiles (GLVs) almost instantly after tissue disruption caused by damages, such as herbivore damage. This rapid formation of GLVs, namely GLV-burst, is an essential factor for the plants’ GLV-dependent direct and indirect defenses. However, mechanism of GLV-burst remains unknown. We observed that the formation of monogalactosyldiacylglycerol hydroperoxides (MGDG-OOHs) by Arabidopsis lipoxygenase 2 (AtLOX2) governs GLV-burst in Arabidopsis. Addition of a Ca{sup 2+} selective chelating reagent, BAPTA, during tissue disruption effectively suppressed the formation of MGDG-OOHs as well as GLV-burst. This suppression was relieved by the addition of Ca{sup 2+}. Therefore, we propose that Ca{sup 2+}-dependent activation of AtLOX2 facilitates GLV-burst formation as observed in leukotriene formation, which is regulated by Ca{sup 2+}-dependent activation of LOXs in animal cells.

60 APPLIED LIFE SCIENCES↗

Large drought-induced variations in oak leaf volatile organic compound emissions during PINOT NOIR 2012

Here, leaf-level isoprene and monoterpene emissions were collected and analyzed from five of the most abundant oak (Quercus) species in Central Missouri's Ozarks Region in 2012 during PINOT NOIR (Particle Investigations at a Northern Ozarks Tower – NOx, Oxidants, Isoprene Research). June measurements, prior to the onset of severe drought, showed isoprene emission rates and leaf temperature responses similar to those previously reported in the literature and used in Biogenic Volatile Organic Compound (BVOC) emission models. During the peak of the drought in August, isoprene emission rates were substantially reduced, and response to temperature was dramatically altered, especially for the species in the red oak subgenus (Erythrobalanus).

54 ENVIRONMENTAL SCIENCES↗

Screening and evaluation of biomass upgrading strategies for sustainable transportation fuel production with biomass-derived volatile fatty acids

Biomass conversion to fuels and chemicals is crucial to decarbonization, but choosing an advantageous upgrading pathway out of many options is challenging. Rigorously evaluating all candidate pathways (process simulation, product property testing) requires a prohibitive amount of research effort; even simple upgrading schemes have hundreds of possible permutations. We present a method enabling high-throughput screening by approximating upgrading unit operations and drop-in compatibility of products (e.g., fuel properties) and apply it to volatile fatty acid (VFA) conversion to liquid transportation fuels via a MATLAB script, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE). VULTURE selects upgrading configurations that maximize fuel blend bio-derived content. We validate VULTURE's approximations through surrogate fuel property testing and process simulation. Techno-economic and life cycle analyses suggest that VFA upgrading processes down-selected by VULTURE are profitable and have low carbon intensities, demonstrating the potential for the strategy to accelerate process development timelines at decreased costs.

09 BIOMASS FUELS↗

Comments on Americium Volatilization during Fuel Fabrication for Fast Reactors

The physical processes relevant to the fabrication of metallic and ceramic nuclear fuels are analyzed, with attention to recycling of fuels containing U, Pu, and minor volatile actinides for the use in fast reactors. This analysis is relevant to the development of a process model that can be used for the numerical simulation and prediction of the spatial distribution of composition in the fuel, an important factor in fuel performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An infrared spectral database for gas-phase quantitation of volatile per- and polyfluoroalkyl substances (PFAS)

We report the construction of a database of vetted infrared spectra specifically targeting volatile fluorocarbon gases that may be emitted during thermal treatment of per- and polyfluoroalkyl substances (PFAS) to assist understanding of treatment processes and improve quantification. To populate this database, protocols derived from the Pacific Northwest National Laboratory (PNNL) infrared spectral database are used, curtailing the species selection for this data set. Each spectrum in the database is a weighted average derived from 10 or more individual measurements at different partial pressures (static method) or flow rates (dissemination method) to yield good fidelity of both strong and weak infrared signatures, with each composite spectrum ranging from = 6500 cm-1 to = 600 cm-1 with an apodized resolution of 0.112 cm-1. This resolution was chosen to fully resolve all spectral features, recognizing that atmospheric pressure broadening results in nearly all ro-vibrational lines having linewidths = 0.1 cm-1. As an example case, application of the database is demonstrated via identification and quantification of dominant 1H-perfluoroheptane and perfluorohept-1-ene fluorocarbon products resulting from thermal decomposition of perfluorooctanoate (PFOA) below 450 °C.

Infrared, Gas-phase spectra, FTIR, Spectral databa↗

Enhanced, continuous, liquid-liquid extraction and in-situ separation of volatile fatty acids from fermentation broth

In 2018 alone, the US landfilled 35.3 million tons of food waste, about 24% of the total landfilled mass. In addition to the negative impacts landfills have demonstrated on the environment and human health, some states have begun to outlaw or dissuade the disposal of food waste and sewage sludge into landfills altogether. An urgent need has thus been created for the development of digestion processes like anaerobic digestion (AD) and arrested methanogenesis (AM) to convert food waste into valuable chemical products. Unfortunately, the buildup of volatile fatty acids (VFAs) during these processes eventually halts the reaction, and energy efficient methodologies for VFA removal are critical for the operation of fermenters. Additionally, VFAs themselves can serve as valuable chemical precursors, and recently AD processes have been modified to increase VFA production during fermentation. However, even with significant research over the past three decades, the separation of VFAs from the fermenter broth has remained expensive. Moreover, the separation of these VFAs from the fermenter broth may cost up to 50% of the entire process budget, hindering the widespread commercial adoption of AD and AM. Here we present a novel liquid-liquid extraction process termed CLEANS (Continuous Liquid-liquid Extraction And iN-situ Separation) as a highly efficient method for continuously separating VFAs from a real fermentation broth solely under gravity. Our optimized process (using an aqueous broth feed pH of 2.5, tri-noctylamine as an extractant, and a 10:1 ratio of aqueous broth to organic extractant), achieved a VFA distribution constant K D = 44.5 ± 7.9, a single-pass recovery = 81.3 ± 2.5%, and an extraction factor = 8.1 ± 0.3. These KD values are over an order of magnitude higher than what has been previously reported for comparable processes. A high aqueous-to-organic flowrate ratio, enabled for the first time by CLEANS, was found to be particularly crucial for achieving optimal extraction. Our separation process demonstrates excellent reproducibility and potential for scalability. The economic and environmental implications of this work are briefly discussed.

42 ENGINEERING↗

Emissions of biogenic volatile organic compounds from arctic shrub litter are coupled with changes in the bacterial community composition

Emissions of biogenic volatile organic compounds (BVOCs) from natural ecosystems impact atmospheric chemistry as well as biological interactions and even soil biogeochemical processes. Plant litter emits substantial amounts of BVOCs. These emissions may contribute to total ecosystem emissions especially in the Arctic where the living plant biomass is low and the amount of litter is expected to increase as the deciduous shrubs expand in response to a warmer climate. Here, we incubated in the laboratory litter from the evergreen Cassiope tetragona and deciduous Salix spp. from a high arctic and a low arctic location. The 8-week-long incubation was conducted with temperature increasing from 5 °C to 26 °C, mimicking the transition from winter to summer. BVOC emissions from the decomposing litter were sampled weekly in adsorbent cartridges and analyzed using gas chromatography–mass spectrometry, and the bacterial community composition was investigated by sequencing of PCR amplified 16S rRNA gene fragments. Our results showed that litter from C. tetragona, which is a terpenoid storing species, had higher BVOC emission rates (mainly terpenoids) than the Salix litter, which does not have specialized BVOC storing compartments. The C. tetragona litter emissions were higher in the high arctic than the low arctic samples. The emission rates from the C. tetragona litter increased during the incubation period, whereas emission rates from the Salix litter decreased, suggesting that the emissions originated from different sources and/or processes. The bacterial community composition in the Salix litter, but not in the C. tetragona litter, changed in parallel with the changes in the BVOC emissions during the incubation period. Therefore, we suggest that bacteria may be more important for the BVOC emissions from decomposing Salix litter than C. tetragona litter.

59 BASIC BIOLOGICAL SCIENCES↗

How volatile isoprenoids improve plant thermotolerance

Volatile isoprenoids mainly include isoprene and monoterpenes, which improve the thermotolerance of the emitting plant by lowering reactive oxygen species (ROS) levels, preserving chloroplast membrane ultrastructure, maintaining photosynthesis and primary metabolism, inducing heat shock proteins, and preserving growth and development. Recent data showed that isoprenoids can act as signaling molecules to improve plant thermotolerance by altering related gene expression through Ca 2+ -mediated signaling pathways. Here, to promote further understanding of isoprenoid-mediated thermotolerance mechanisms, we review current understanding of isoprenoid-induced plant thermotolerance, along with new findings describing the corresponding underlying mechanisms and putative signaling pathways. This information is beneficial for the potential utilization of isoprenoids for enhancing crop tolerance to global warming either by enhancing the emission of isoprenoids or by using isoprenoid-inspired anti-high temperature agents.

Ca2+ signal↗

Anhydrous volatile fatty acid extraction through omniphobic membranes by hydrophobic deep eutectic solvents: Mechanistic understanding and future perspective

Volatile fatty acids (VFAs) derived from arrested anaerobic digestion (AD) can be recovered as a valuable commodity for value-added synthesis. However, separating VFAs from digestate with complex constituents and a high-water content is an energy-prohibitive process. This study developed an innovative technology to overcome this barrier by integrating deep eutectic solvents (DESs) with an omniphobic membrane into a membrane contactor for efficient extraction of anhydrous VFAs with low energy consumption. Here, a kinetic model was developed to elucidate the mechanistic differences between this novel omniphobic membrane-enabled DES extraction and the previous hydrophobic membrane-enabled NaOH extraction. Experimental results and mechanistic modeling suggested that VFA extraction by the DES is a reversible adsorption process facilitating subsequent VFA separation via anhydrous distillation. High vapor pressure of shorter-chain VFAs and low Nernst distribution coefficients of longer-chain VFAs contributed to DES-driven extraction, which could enable continuous and in-situ recovery and conversion of VFAs from AD streams.

59 BASIC BIOLOGICAL SCIENCES↗