SEARCH · Engineering Papers

Results for “type transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Simultaneously Enhancing Exciton/Charge Transport in Organic Solar Cells by an Organoboron Additive

Efficient exciton diffusion and charge transport play a vital role in advancing the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, a facile strategy is presented to simultaneously enhance exciton/charge transport of the widely studied PM6:Y6-based OSCs by employing highly emissive trans-bis(dimesitylboron)stilbene (BBS) as a solid additive. BBS transforms the emissive sites from a more H-type aggregate into a more J-type aggregate, which benefits the resonance energy transfer for PM6 exciton diffusion and energy transfer from PM6 to Y6. Transient gated photoluminescence spectroscopy measurements indicate that addition of BBS improves the exciton diffusion coefficient of PM6 and the dissociation of PM6 excitons in the PM6:Y6:BBS film. Transient absorption spectroscopy measurements confirm faster charge generation in PM6:Y6:BBS. Moreover, BBS helps improve Y6 crystallization, and current-sensing atomic force microscopy characterization reveals an improved charge-carrier diffusion length in PM6:Y6:BBS. Finally, owing to the enhanced exciton diffusion, exciton dissociation, charge generation, and charge transport, as well as reduced charge recombination and energy loss, a higher PCE of 17.6% with simultaneously improved open-circuit voltage, short-circuit current density, and fill factor is achieved for the PM6:Y6:BBS devices compared to the devices without BBS (16.2%).

14 SOLAR ENERGY↗

DOE OSTI2025

Encapsulation of Ba in InSb Framework Introduces Chirality in Clathrate-Like BaIn 4 Sb 4

The discovery of Zintl compounds remains a powerful strategy for identifying materials with tunable electronic and thermal transport properties. During a concerted search for new inorganic clathrates with In–Sb frameworks, we discovered BaIn 4 Sb 4 . The composition of this phase deviates from that expected for a type-I clathrate with tetrahedral coordination of all In and Sb atoms (Ba 8 In 31 Sb 15 ). Instead, in the chiral structure of BaIn 4 Sb 4 (space group P 3 1 21, No. 152), a part of the In atoms have a trigonal planar coordination of 1In + 2Sb, forming Sb 2 –In–In–Sb 2 nonplanar fragments isostructural to diborane(4) B 2 H 4 with D 2 d symmetry. Ba atoms are located inside 16-vertex In 8 Sb 8 polyhedra, which share vertices and edges to form a chiral framework around the 3 1 screw axes. The title compound is electron-balanced, [Ba 2+ ][In 2+ ] 2 [In 3+ ] 2 [Sb3–] 4 , which was confirmed by characterization of the charge and heat transport properties. BaIn 4 Sb 4 exhibits a low thermal conductivity and high Seebeck coefficient, suggesting its untapped potential for thermoelectric applications. Finally, density functional theory (DFT) calculations indicate that chemical doping may enhance carrier concentration and improve the originally low electrical conductivity, thus enhancing thermoelectric performance.

electrical properties↗

DOE OSTI2020

Role of fast-ion transport manipulating safety factor profile in KSTAR early diverting discharges

Magnetohydrodynamics (MHD) activity is analyzed for a particular KSTAR discharge category, the main features of which are a high-$q_\mathrm{min}$ and a broad q profile. An interesting finding in this scenario is that a steady-state high-$q_\mathrm{min}$ and broad q profile has been constructed even without a strong off-axis current drive scheme. Time traces of magnetics spectrograms and electron cyclotron emission imaging (ECEI) clearly show that Alfvénic type MHD activity appears as a high-$q_\mathrm{min}$ and broad q profile is formed. Conversely, this activity disappears as the current profiles evolve toward a low-$q_\mathrm{min}$ profile. In this study, the effect of MHD modes and accompanying fast-particle transport on the formation of various current profiles is explored. The frequency patterns of the magnetics spectrograms and ECEI coherence are compared using a NOVA analysis to determine which series of Alfvénic modes are active. Then, the kick-model is applied to potential modes, and used to estimate how much fast-ions are transported and beam driven current profiles are varied. Here, by comparing the reconstructed total current profile from the kinetic EFIT with the beam-driven current profile estimated from the kick model, it is determined how energetic particle transport is responsible for maintaining the safety factor profile and which q profile can provide high β N operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Role of Eu-Doping in the Electron Transport Behavior in the Zintl Thermoelectric Ca 5-x-y Yb x Eu y Al 2 Sb 6 System

A series of Eu-doped Zintl compounds belonging to theCa 5-x-y Yb x Eu y Al 2 Sb 6 (x = 0, 1.12; 0 ≤ y ≤ 0.63(2)) system have been successfully synthesized by both the arc-melting and the molten Pb-flux methods. All of the five title compounds initially crystallized in the Ca 5 Ga 2 As 6 -type phase (space group Pbam, Z = 2, Pearson code oP26) and maintained their original structure even after the post-heat treatment, unlike the recently reported n-type Zintl analogues in the Ca 5-x-y Yb x RE y Al 2 Sb 6 (RE = Pr, Nd, Sm) systems, which underwent a phase transition from the Ca 5 Ga 2 As 6 -type to the Ca 5 Al 2 Bi 6 -type phase after annealing. This research aimed to understand the origin of the structural preference of the title Ca 5-x-y Yb x Eu y Al 2 Sb 6 system, whether it was affected by the valence electron count or the cationic size. Electrical transport property measurements showed an increase in electrical conductivities and a decrease of Seebeck coefficients for Ca 4.89(1) Eu 0.11 Al 2 Sb 6 , Ca 4.82(1) Eu 0.18 Al 2 Sb 6 , and Ca 4.62(1) Eu 0.38 Al 2 Sb 6 , compared to the parental compound Ca 5 Al 2 Sb 6 . Hole effect measurements proved that these changes should be attributed to the reduced carrier concentration and enhanced carrier mobility. The comprehensive density functional theory calculations including electron density map analysis for the hypothetical model Ca 4.5 Eu 0.5 Al 2 Sb 6 revealed that the polarity between Al and Sb forming the anionic frameworks decreased as the Eu-dopants were introduced, which eventually affected the carrier mobility in the anionic frameworks. Thermal conductivity measurements proved that the Eu-doping successfully lowered the lattice thermal conductivity because of the enhanced atomic disordering. In conclusion, the magnetization measurements for Ca 4.37(2) Eu 0.63 Al 2 Sb 6 showed a typical Curie–Weiss behavior with weak antiferromagnetic nearest-neighbor interactions with θ p = -5.07 K.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Comparison of Irradiated TRISO Fuel Radioactivity from Multiple Advanced Reactor Designs

The SCALE code system was used to model, deplete, and compare several different TRISO-fueled reactor designs: a helium-cooled prismatic reactor, a helium-cooled pebble-bed reactor (PBR), and a Fluoride-Lithium-Beryllium (FLIBE) molten-salt-cooled PBR. The purpose of this comparison was to understand how differences in the reactor designs affect the radioactivity of the fuel after discharge and whether those differences are significant. First, the various reactor designs were build and depleted in the TRITON module for each design and fuel enrichment. Then, the TRITON outputs were used to create burn-up dependent reactor libraries. These libraries were then used by ORIGEN to determine the activities of discharged fuel for each reactor, which were compared to generic Westinghouse 17x17 fuel. Overall, the results showed that short term decays are dominated by reactors with higher operating powers, and the reactor type, initial fuel enrichment, and maximum burn-up are of only secondary importance. Although this analysis only focuses on activities in becquerels, these dependencies are consistent with the expected behavior of decay heat. However, analysis of long- term time periods post-irradiation shows that the reactor type and maximum burn-up have strong impacts on the activities; initial fuel enrichment has a secondary impact while operating power is inconsequential. These results would be useful for analyses, such as dose assessment and modeling in post- release scenarios; normal fuel handling operations; and spent fuel transport, storage and disposal. Of particular interest, the results in this report show that analyses that focus on spent nuclear fuel of advanced reactors need to consider each parameter carefully. Unsurprisingly, if the correct operating power is not used in short term analyses, the results will not be correct. Perhaps unexpectedly, however, if the correct reactor type is not used, then the long term results will also be incorrect, especially for areas such as permanent disposal. Even though this report focuses on the total activity of nuclear fuel, it provides initial results on the effects of various input parameters and also provides a framework to extend the work into other analyses of spent fuel from advanced reactors, especially those employing TRISO fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Periodic Narrowband Radio Wave Emissions and Inward Plasma Transport at Saturn's Magnetosphere

The abrupt brightening of an Energetic Neutral Atom (ENA) blob or cloud has been interpreted as plasma injection in the Kronian magnetosphere (termed ENA injection herein). Morphologically, there appears to be two types of abrupt ENA cloud brightening: (1) the brightening of a large cloud usually seen at distances >10–12 R {sub s} (R {sub s} ∼ 60,268 km) in the midnight or postmidnight region; (2) the brightening of a smaller cloud usually seen at distances <10–12 R {sub s} around 21–03 magnetic local time. Among many radio waves observed at Saturn, type 2 ENA injections correlate best with the 5 kHz narrowband (NB) waves. Using Cassini Ion and Neutral Camera (INCA) and Radio and Plasma Wave Science (RPWS) data, we examine the periodicities of the type 2 ENA injections and the 5 kHz NB emissions as well as their cross-correlations, which have been previously used to measure the lag times or phase differences. Because correlational analysis can only establish linear relationships, we also use mutual information to establish linear and nonlinear relationships. On average, the peak of the 5 kHz NB emission lags those of the type 2 ENA injection by about a few minutes to 2 hr. The injection of hot plasma to the inner magnetosphere can lead to temperature anisotropy, which can generate electrostatic upper hybrid waves, which upon encountering the high-density gradient at the outer edge of the Enceladus density torus, can mode convert to Z mode and then to O mode. The 5 kHz NB waves commonly propagate in the O mode.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Engineering Permanent Porosity into Liquids

The possibility of engineering well-defined pores into liquid materials is fascinating from both a conceptual and an applications point of view. Although the concept of porous liquids was proposed in 2007, these materials had remained hypothetical due to the technical challenges associated with their synthesis. Over the past five years, however, reports of the successful construction of porous liquids based on existing porous scaffolds, such as coordination cages, organic cages, metal–organic frameworks, porous carbons, zeolites, and porous polymers, have started to emerge. Here, the focus is on these early reports of porous liquids as prototypes in the field, classified according to the previously defined types of porous liquids. Particular attention will be paid to design strategies and structure–property relationships. Porous liquids have already exhibited promising applications in gas storage, transportation, and chemical separations. Furthermore, they show great potential for use in the chemical industry. The challenges of preparation, scale-up, volatility, thermal and chemical stability, and competition with porous solids will also be discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Analysis of anion exchange membrane water electrolyzer performance and its evolution over time

Understanding water, evolved gas, and ionic transport in membrane-electrode-assemblies (MEAs) is essential for the development of high performance and durable anion exchange membrane water electrolyzers (AEMWEs). This study evaluates the MEA conditioning process, operating conditions, and short-term stability in a 1 M potassium hydroxide (KOH) electrolyte, focusing on the underlying transport phenomena. We observe a significant initial voltage loss in continuous cell operation, which could be associated with gas bubble accumulation, transport layer or flow field passivation, and changes in the catalyst oxidation state. Further, we investigate the effects of materials and operational configurations, including the membrane type and thickness, and the electrolyte flow rate, including KOH being fed to both electrodes as well as to the anode only. Furthermore, the effect of membrane drying temperature on ex situ as well as in situ electrochemical performance is evaluated. Finally, we discuss 700 h of AEMWE operation at 1 A/cm 2 , highlighting the underlying degradation phenomena.

25 ENERGY STORAGE↗

DOE OSTI2020

Estimation of abatement potentials and costs of air pollution emissions in China

Understanding the air pollution emission abatement potential and associated control cost is a prerequisite to design cost ef?cient control policies. In this study, a linear programming algorithm model, International Control Cost Estimate Tool, was updated with cost data for applications of 56 types of end-of-pipe technologies and ?ve types of renewable energy in 10 major sectors namely power generation, industry combustion, cement pro-duction, iron and steel production, other industry processes, domestic combustion, transportation, solvent use, livestock rearing, and fertilizer use. The updated model was implemented to estimate the abatement potential and marginal cost of multiple pollutants in China. The total maximum abatement potentials of sulfur dioxide (SO2), nitrogen oxides (NOx), primary particulate matter (PM2.5), non-volatile organic compounds (NMVOCs), and ammonia (NH3) in China were estimated to be 19.2, 20.8, 9.1, 17.2 and 8.6 Mt, respectively, which accounted for 89.7%, 89.9%, 94.6%, 74.0%, and 80.2% of their total emissions in 2014, respectively. The associated control cost of such reductions was estimated as 92.5, 469.7, 75.7, 449.0, and 361.8 billion CNY in SO2, NOx, primary PM2.5, NMVOCs and NH3, respectively. Shandong, Jiangsu, Henan, Zhejiang, and Guangdong provinces exhibited large abatement potentials for all pollutants. Provincial disparity analysis shows that high GDP regions tend to have higher reduction potential and total abatement costs. End-of-pipe technologies tended be a cost-ef?cient way to control pollution in industries processes (i.e., cement plants, iron and steel plants, lime production, building ceramic production, glass and brick production), whereas such technologies were less cost- effective in fossil fuel-related sectors (i.e., power plants, industry combustion, domestic combustion, and transportation) compared with renewable energy. The abatement potentials and marginal abatement cost curves developed in this study can further be used as a crucial component in an integrated model to design optimized cost-ef?cient control policies.

Zhang, Fenfen↗

DOE OSTI2022

Tuning superconductivity of Bi 2 Sr 2 CaCu 2 O 8+x by fluoride ion intercalation with LaF 3 gate dielectric

Here, we demonstrate fluorine intercalation into Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO) flakes, as thick as 100 nm, by back-gating a single crystalline LaF 3 substrate. Element-sensitive analysis not only confirms the presence of fluorine in BSCCO after gating but also reveals lateral diffusion of fluorine in BSCCO. Transport measurements further demonstrate the hole-doping effect of fluoride ions in BSCCO through effective modulation of the superconducting transitions. Our work introduces a distinct type of ions (F - ) that can be intercalated into materials via solid state back-gating. It broadens the toolbox of ion back-gating and is useful for addressing exotic phenomena in the heavily hole doped regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

ML-Based Pebble Power Reconstruction for Pebble Bed Reactor Analysis

Pebble power reconstruction has been explored to complement the conventional homogenized modeling approach in pebble bed reactor (PBR) analysis, as detailed heterogeneous geometry calculations are computationally expensive. The random distribution of pebble fuels within the core challenges the application of conventional pin power reconstruction methods. To address this, we introduce a machine learning approach based on the transformer model, composed of encoder and decoder layers, to estimate the flux and power form functions for reconstructing individual pebble neutron fluxes and powers. The homogeneous neutron flux distribution within each spectral zone (SZ) is obtained from finite element solutions of global diffusion or transport calculations. Verification tests demonstrate that the trained transformer model accurately predicts power form functions over a range of conditions, including variations in pebble enrichment, location, type, SZ size, and burnup. In particular, verification using a three-dimensional PBR benchmark with burned pebbles shows good agreement in heterogeneous pebble power distributions between Griffin and Serpent. These results highlight the potential of applying conventional pin power reconstruction approaches to PBR cores with randomly distributed pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Advanced Manufacturing of Intermediate-Temperature Protonic Ceramic Electrochemical Cells

Proton conducting oxide (i.e., protonic ceramic) has been thought of as an ideal solid electrolyte for energy conversion and storage applications since Iwahara et al. reported the perovskite-type protonic ceramics represented by doped barium/strontium cerates and zirconates in the 1980s. Here, proton, as the charge carrier in protonic ceramics, possesses a much lower transport activation energy than oxide-ion, which has rendered protonic ceramics for extensive intermediate-temperature (IT, 400-700°C) electrochemical devices such as protonic ceramic fuel cells (PCFCs), reversible protonic ceramic fuel cells, and protonic ceramic membrane reactors.

08 HYDROGEN↗

DOE OSTI2022

Effects of stratification and charge cooling on combustion in a gasoline direct-injection compression ignition (GDCI) engine

With the development of low temperature engine combustion strategies, performance of gasoline-type fuels under compression ignition conditions has attracted extensive research interest. Meanwhile, for the sake of co-optimization of engines and fuels for future ground transportation, identification and evaluation of general fuel properties should be a core research priority instead of endless testing of specific fuels. In this study, the roles of fuel octane sensitivity in characterizing the ignition performance of gasoline surrogates have been systematically investigated under typical gasoline direct ignition compression ignition (GDCI) engine conditions using 3D combustion CFD simulation, especially considering the subsequent in-cylinder charge stratification and charge cooling. Two different operating conditions, high boost pressure low boost temperature (beyond-RON) case and low boost pressure high boost temperature (beyond-MON) case, were considered. By comparing with our previous zero-dimensional chemical kinetic study of gasoline surrogates in advanced compression ignition (ACI) engines, the effects of stratification and charge cooling on the combustion processes are investigated. It is found that different fuel octane sensitivities lead to slight difference in equivalence ratio stratification and charge cooling due to differences in volatility. However, fuel reactivity is still the more dominant factor than the stratification and charge cooling effects in determining combustion phasing. The present results help to justify the P-T domain framework for engine autoignition analysis of overlapping pressure-temperature trajectory with ignition delay iso-contour. Here, the results also provide useful guidance to the understanding of GCI combustion process, and to the evaluation of controlling fuel properties and the selection of alternative fuels in GCI engines.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

Demonstration of NEAMS Multiphysics Tools for Fast Reactor Applications

The SHARP toolkit is a high-fidelity reactor simulation tool developed under the U.S. Department of Energy, Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. SHARP toolkit is comprised of the neutronics module PROTEUS thermal hydraulics module Nek5000, and structural mechanics module Diablo. During FY17 and FY18, the PROTEUS and Nek5000 components of SHARP were applied to solve challenging sodium-cooled fast reactor (SFR) problems. In particular, selected hot channel factors (HCF) for a prototype metal-fueled SFR design (the AFR-100) were analyzed in high fidelity, and the “SHARP zooming capability” for SFRs was developed and demonstrated to reduce computational expense for full core problems in cases where detailed data is needed in selected fuel assemblies. After the previous success applying SHARP to challenging SFR problems, the focus in FY19 and FY20 expanded to additional fast reactor applications including lead cooled fast reactors (LFR) and sodium cooled fast reactors (SFR). The specific technical tasks were (1) assessment of hot channel factors for LFR, for which no data currently exists, and (2) demonstration of zooming capability in assemblies of the Versatile Test Reactor (VTR). First-of-a-kind hot channel factor (HCF) estimation for LFR with high fidelity codes (PROTEUS/Nek5000) was successfully demonstrated in this study which began in FY19 and continued in FY20. Selected HCF were computed and compared with SFR data (AFR-100, EBR-II). The findings confirm that different reactor types, design parameters and uncertainties lead to different HCFs. Careful estimation of HCF for a specific design is necessary to obtain appropriate HCFs. In addition to improvement in HCF accuracy, high fidelity tools generate data to help the designer better understand the mechanism of the impact from these uncertainties. For example, the impact of cladding thickness manufacturing tolerance resulted in non-intuitive effects in the corner pins of the LFR assembly. This procedure of computing HCF using high fidelity models shows promise and flexibility for being repeated for any arbitrary reactor of choice. Along with the application on SFR and LFR, the capability of the tools has also been matured to deal with different reactor types and designs. Progress was made towards extending the previously demonstrated SHARP zooming capability to non-fueled SFR assemblies. In particular, in FY19 a gamma transport capability was implemented in both high fidelity PROTEUS solvers in order to accurately account for heat deposition caused by gamma particles, which accounts for ~10% of total core power. Neutronics verification cases were carried out for a candidate Versatile Test Reactor (VTR) design using the new gamma transport capability in PROTEUS. Comparisons were made with continuous energy MCNP calculations and shown to agree well. The models for the full core design with heterogeneous control and fuel assemblies is in progress for PROTEUS-SN and completed with MCNP. The MCNP power distributions were transferred to Nek5000 to perform thermal hydraulic calculations of the control and fuel assembly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Fabrication and Testing of DOE Standard Canister Closure Leak Test Assembly

DOE manages over 300 types of spent nuclear fuel (SNF), many of which are located at the Idaho National Laboratory (INL) site. Managing this large variety of SNF for storage, transportation, and disposal poses a challenge to DOE. The Idaho Cleanup Project and INL are collaborating on the DOE SNF Road-Ready Demonstration (“Road-Ready Demonstration”), which will develop and demonstrate the designs, technology, processes, and regulatory framework for packaging DOE-managed SNF for “road-ready dry storage.” Road-ready dry storage is an SNF management concept in which SNF is packaged into dry, sealed canisters that are then placed in onsite storage in anticipation of later transport and disposition. The forward-looking goal of the Road-Ready Demonstration is to establish the foundation for a large-scale road-ready dry storage program at the INL site. In support of establishing a large-scale road-ready dry storage program at the INL site, the Road-Ready Demonstration will first package Fort St. Vrain SNF currently in dry storage at INL into several DOE Standard Canisters (DOESCs). These DOESCs will in turn be loaded into another containment similar to commercial multi-purpose canisters. This multi-purpose canister will then be compatible with a transportation or storage system, such as a storage cask for interim storage or transportation package for offsite transport. These DOESCs will remain sealed over the course of their storage, transportation, and applicable disposal functions. The closure process for the DOESC will include fuel and basket loading, welding, inspection, leak testing, and, if needed, repair. As a follow-up to previous discussions on the design of the DOE Closure Leak Test Assembly (LTA), this report describes recent fabrication and testing efforts performed at INL. DOESCs are sealed by two sequential gas tungsten arc welds, both of which are performed by remotely operated and semiautomatic welding systems. The first weld is a circumferential pipe weld that completes the assembly of the canister body and lid assembly. The second and final closure weld attaches the vent plug to the vent socket via a butt joint. After the second weld is performed, the welds are helium leak tested using an evacuated envelope technique. The LTA was designed for both remote and manual operation. This report describes the fabrication and performance testing associated with the evacuated envelope technique. INL staff designed, fabricated, and tested the LTA at INL facilities. This testing included establishing technique and system sensitivities in accordance with ASME and American National Standards Institute N14.5 requirements. Forthcoming work will cover such areas as design optimization, process and personnel qualification, and implementation in Road-Ready Demonstration operations.

42 ENGINEERING↗

DOE OSTI2023

Fabrication and Testing of DOE Standard Canister Closure Leak Test Assembly – 24139

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2026

Influence of Nanoconfinement and Elevated Temperatures on Geocolloid-Facilitated Transport of Energy-related Contaminants

The main objective of this project is to obtain a better understanding of the transport behavior and interactions of geocolloids in the presence of energy- related contaminants under bulk and nanoconfined conditions. In that, we first established solid protocols to synthesize and fabricate numerous types of geocolloids with a. various sizes ranging from 40 – 800 nm and b. different hydrophile-lipophile balance (HLB) ratios in the range of 25:75 to 75:25. Direct force measurements with geocolloids having different degrees of surface coverages (i.e. HLB to realistically mimic adsorption of energy related contaminants) were conducted using the Surface Forces Apparatus (SFA) over a distance regime starting from 8μm all the way down to molecular contact. Repulsive forces were observed on approach starting from > 3μm, followed by an exponential increase of which magnitude appears to be larger than a decay length obtained from Derjaguin–Landau–Verwey–Overbeek (DLVO) theory in pure water. When the geocolloids were confined in salted water, the magnitude of onset of repulsion was varied as a function of salinity in solution, which can significantly alter a purely repulsive screened electrostatic (coulombic) interaction arising from, among geocolloids as well as between geocolloids and geosurfaces. The viscosity and flow characteristics of geocolloidal suspensions at different degrees of confinement were also investigated where we identified highly discontinuous rheological behaviors below a critical nanoconfinement level. We anticipate that the knowledge gained through this study will enable the scientists and researchers to better assess transport and fate behaviors of geocolloidal dispersions that can carry energy-related contaminants under realistically emulated geosystem.

03 NATURAL GAS↗

DOE OSTI2019

Fuel Economy and Cost Estimates for Medium and Heavy Duty Trucks

The U.S. Department of Energy’s (DOE’s) Vehicle Technologies Office (VTO) and Hydrogen and Fuel Cell Technologies Office (HFTO) aim to develop sustainable, affordable and efficient technologies for transportation of goods and people. These offices seek to advance DOE investments in advanced transportation component technologies and powertrains that translate to the estimated potential vehicle-level fuel savings contained herein. As part of quantifying these benefits, we have been asked to take a three-decades-long view of the fuel-saving vehicle technologies that will likely be implemented in medium- and heavy-duty trucks. In this work, we focus on technologies funded by VTO and HFTO that we expect to see during this time frame. Simulation was carried out for more than 20 types of trucks, ranging from Class 2 (the smallest medium-duty trucks, which span from Class 2b–6) to Class 8 (the largest heavy-duty trucks, which span Classes 7 and 8). The output of this study provides the fuel consumption and estimated purchase prices for trucks that employ advanced technologies, where both types of output offer a vehicle-level perspective and estimated projections about the future of advanced-technology medium- and heavy-duty trucks, as well as cost and performance data pairs that can inform other advanced transportation studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗