Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Theory for passive microwave remote sensing of near-surface soil moisture

The theory of microwave thermal emission from a nonscattering half-space medium is developed for application to regions with nonuniform subsurface soil-moisture and temperature variations. A coherent stratified model is presented which is valid for nonuniform temperature profiles and rapidly varying moisture profiles, under which conditions the commonly used emissivity and radiative-transfer approaches become inaccurate. For naturally occurring profiles the stratified model gives more accurate results than the other approaches at frequencies below about 4 GHz. Experimental results from ground-based radiometric observations of a controlled target area compare systematically with brightness temperatures predicted from the theoretical model to within approximately 10 K. Results of dielectric-constant measurements of the sand are given at seven frequencies in the microwave range and for moisture contents in the range from 0% to 30% by volume. By using this model, the thermal microwave emission spectrum is computed for a number of representative moisture and temperature profiles in the frequency range from 0.25 to 25 GHz.

Njoku, E. G.↗

A review of depolarization modeling for earth-space radio paths at frequencies above 10 GHz

A review is presented of models for the depolarization, caused by scattering from raindrops and ice crystals, that limits the performance of dual-polarized satellite communication systems at frequencies above 10 GHz. The physical mechanisms of depolarization as well as theoretical formulations and empirical data are examined. Three theoretical models, the transmission, attenuation-derived, and scaling models, are described and their relative merits are considered.

Bostian, C. W.↗

Remote Sensing of Earth Terrain

The objective of this research is to develop theoretical models that are useful and practical in the remote sensing of the Earth environment including the Earth terrain, the lower and the upper atmospheres. Various models applicable to the microwave remote sensing of vegetation, snow-ice, and atmospheric precipitation have been developed. Such studies shall be extended to the higher frequency range to unify the optical band and the microwave theoretical foundations. The study, which had an emphasis on vegetation canopy to include all terrain media, and the whole Earth environment will be extended. A data base will be developed to generate scene radiation characteristics which will benefit the studies of global inhabitability, meteorological applications, and crop yield.

Kong, J. A.↗

Rain waves-wind waves interaction application to scatterometry

Modulation of a rain wave pattern by longer waves has been studied. An analytical model taking into account capillarity effects and obliquity of short waves has been developed. Modulation rates in wave number and amplitude have been computed. Experiments were carried out in a wave tank. First results agree with theoretical models, but higher values of modulation rates are measured. These results could be taken into account for understanding the radar response from the sea surface during rain.

Kharif, C.↗

Ignition and subsequent flame spread over a thin cellulosic material

Both ignition and flame spread on solid fuels are processes that not only are of considerable scientific interest but that also have important fire safety applications. Both types of processes, ignition and flame spread, are complicated by strong coupling between chemical reactions and transport processes, not only in the gas phase but also in the condensed phase. In most previous studies, ignition and flame spread were studied separately with the result that there has been little understanding of the transition from ignition to flame spread. In fire safety applications this transition is crucial to determine whether a fire will be limited to a localized, temporary burn or will transition into a growth mode with a potential to become a large fire. In order to understand this transition, the transient mechanisms of ignition and subsequent flame spread must be studied. However, there have been no definitive experimental or modeling studies, because of the complexity of the flow motion generated by buoyancy near the heated sample surface. One must solve the full Navier-Stokes equations over an extended region to represent accurately the highly unstable buoyant plume and entrainment of surrounding gas from far away. In order to avoid the complicated nature of the starting plume problem under normal gravity, previous detailed radiative ignition models were assumed to be one-dimensional or were applied at a stagnation point. Thus, these models cannot be extended to include the transition to flame spread. The mismatch between experimental and calculated geometries means that theories cannot be compared directly with experimental results in normal gravity. To overcome the above difficulty, theoretical results obtained without buoyancy can be directly compared with experimental data measured in a microgravity environment. Thus, the objective of this study is to develop a theoretical model for ignition and the transition to flame spread and to make predictions using the thermal and chemical characteristics of a cellulosic material which are measured in normal gravity.

Nakabe, Kazuyoshi↗

Photoionization Modeling

Warm absorber spectra are characterized by the many lines from partially ionized intermediate-Z elements, and iron, detected with the grating instruments on Chandra and XMM-Newton. If these ions are formed in a gas which is in photoionization equilibrium, they correspond to a broad range of ionization parameters, although there is evidence for certain preferred values. A test for any dynamical model for these outflows is to reproduce these properties, at some level of detail. In this paper we present a statistical analysis of the ionization distribution which can be applied both the observed spectra and to theoretical models. As an example, we apply it to our dynamical models for warm absorber outflows, based on evaporation from the molecular torus.

Kallman, T.↗

Gamma rays and large scale galactic structure

Many theoretical models were developed in an attempt to explain the spatial structure in the observed emission which results from interactions of energetic cosmic rays with the interstellar gas. The peaks in the observed distribution are remarkably well correlated with longitudes corresponding to tangential directions to known spiral arm features. Based on theoretical and experimental arguments, it is assumed that on the scale of galactic arms the cosmic rays are more intense where the mass of the gas to which they are coupled is greatest. Refining this model with the results of recent surveys of the interstellar gas, a good fit to the observations is obtained whether the cosmic rays are confined to the spiral arms in the disk or are more evenly confined as in a flat halo model.

Kniffen, D. A.↗

Modeling the Magnetic and Thermal Structure of Active Regions: 1st Year 1st Semi-Annual Progress Report

This report covers technical progress during the first six months of the first year of NASA SR&T contract "Modeling the Magnetic and Thermal Structure of Active Regions", NASW-03008, between NASA and Science Applications International Corporation, and covers the period January 14, 2003 to July 13, 2003. Under this contract SAIC has conducted research into theoretical modeling of the properties of active regions using the MHD model.

Mikic, Zoran↗

Thermal design verification testing for the ATS-F and -G spacecraft.

There is a wide fluctuation in the internal power dissipation from the components within the earth viewing module (EVM). The electronic component functional reliability required for a two-to-five year mission is the most significant factor for the thermal design criteria. A mathematical thermal model of the EVM and the orbital environment is used to predict the performance of the thermal control system. Comparisons of the results obtained in chamber thermal balance tests with the data computed on the basis of the theoretical model provide the means for validating the thermal design.

Coyle, M.↗

Verification of Small Hole Theory for Application to Wire Chaffing Resulting in Shield Faults

Our work is focused upon developing methods for wire chafe fault detection through the use of reflectometry to assess shield integrity. When shielded electrical aircraft wiring first begins to chafe typically the resulting evidence is small hole(s) in the shielding. We are focused upon developing algorithms and the signal processing necessary to first detect these small holes prior to incurring damage to the inner conductors. Our approach has been to develop a first principles physics model combined with probabilistic inference, and to verify this model with laboratory experiments as well as through simulation. Previously we have presented the electromagnetic small-hole theory and how it might be applied to coaxial cable. In this presentation, we present our efforts to verify this theoretical approach with high-fidelity electromagnetic simulations (COMSOL). Laboratory observations are used to parameterize the computationally efficient theoretical model with probabilistic inference resulting in quantification of hole size and location. Our efforts in characterizing faults in coaxial cable are subsequently leading to fault detection in shielded twisted pair as well as analysis of intermittent faulty connectors using similar techniques.

Schuet, Stefan R.↗

Absorption of Solar Radiation by Clouds: Observations Versus Models

There has been a long history of unexplained anomalous absorption of solar radiation by clouds. Collocated satellite and surface measurements of solar radiation at five geographically diverse locations showed significant solar absorption by clouds, resulting in about 25 watts per square meter more global-mean absorption by the cloudy atmosphere than predicted by theoretical models. It has often been suggested that tropospheric aerosols could increase cloud absorption. But these aerosols are temporally and spatially heterogeneous, whereas the observed cloud absorption is remarkably invariant with respect to season and location. Although its physical cause is unknown, enhanced cloud absorption substantially alters our understanding of the atmosphere's energy budget.

Cess, R. D.↗

An energy principle for high-latitude electrodynamics

A theoretical model for mid- and high-latitude electric fields and currents is constructed using Fourier analysis methods. A two-dimensional planar ionosphere with an enhanced conductivity auroral belt and field-aligned currents at the edges is employed. The postulate that the electric field and currents adjust self-consistently to minimize the global Joule dissipation rate defines a theoretical relation between the primary and secondary field-aligned currents. This so-called minimal dissipation configuration is examined using several input field-aligned current models, and graphical solutions for the electric field and ionospheric current are shown. A detailed discussion and interpretation of the solutions with relation to diverse observations and high-latitude phenomenology are included.

Barbosa, D. D.↗

Temporal resolution for crop discrimination estimated using J-M distance

A study is presented which examines techniques utilizing spectral/phenological data to classify and mensurate target crops at predetermined accuracies in order to estimate the temporal resolution requirements for a remote sensing system. An analysis is made of the physical target (crop) characteristics as they vary in time. A model is developed relating the frequency required to attain a particular probability of correct discrimination with N accumulated observations to that required with single observations. Finally, results for a multicrop spectral data set are shown to substantiate the theoretically-modeled results.

Baran, J. W.↗

Oxygen production System Models for Lunar ISRU

In-Situ Resource Utilization (ISRU) seeks to make human space exploration feasible; by using available resources from a planet or the moon to produce consumables, parts, and structures that otherwise would be brought from Earth. Producing these in situ reduces the mass of such that must be launched and doing so allows more payload mass' for each mission. The production of oxygen from lunar regolith, for life support and propellant, is one of the tasks being studied under ISRU. NASA is currently funding three processes that have shown technical merit for the production of oxygen from regolith: Molten Salt Electrolysis, Hydrogen Reduction of Ilmenite, and Carbothermal Reduction. The ISRU program is currently developing system models of, the , abovementioned processes to: (1) help NASA in the evaluation process to select the most cost-effective and efficient process for further prototype development, (2) identify key parameters, (3) optimize the oxygen production process, (4) provide estimates on energy and power requirements, mass and volume.of the system, oxygen production rate, mass of regolith required, mass of consumables, and other important parameters, and (5) integrate into the overall end-to-end ISRU system model, which could be integrated with mission architecture models. The oxygen production system model is divided into modules that represent unit operations (e.g., reactor, water electrolyzer, heat exchanger). Each module is modeled theoretically using Excel and Visual Basic for Applications (VBA), and will be validated using experimental data from on-going laboratory work. This modularity (plug-n-play) feature of each unit operation allows the use of the same model on different oxygen production systems simulations resulting in comparable results. In this presentation, preliminary results for mass, power, volume will be presented along with brief description of the oxygen production system model.

Santiago-Maldonado, Edgardo↗

Perception of interstellar structure - Facing complexity

Some orthodox notions concerning the structure and evolution of star-forming regions are challenged; it is proposed that they arise largely by a dual process in which conceptual models are fashioned after categories which are in great part reflections of observational limitations, and the models are projected onto interpretations of data. Several examples are discussed. The need for internal support of molecular clouds is questioned. It is suggested that the inverse density-size relation often claimed for clouds and accounted for by several theoretical models is an artifact caused by limited dynamic range column density detectability, selection bias, distance uncertainties, and internal density gradients, and is contradicted by several unbiased surveys. Column density structures mapped with a large spatial and column density dynamic range are found to be dominated by irregular, connected, and nested forms on all sides. These features and a technique for the quantification of the complex structure are illustrated with a densely-sampled column density image of the Taurus region constructed from IRAS data.

Scalo, John↗

A New Analytical Approach to Predict Spacing Selection in Lamellar and Rod Eutectic Systems

In this paper, we reexamine the Jackson and Hunt (JH) theory and relax the assumption of isothermal solid/liquid interface(SLI) used in their treatment. A modification of the term B. in the expression of the solute concentration profile is also proposed. Based on the predictions of this modified theory the traditional definitions of regular and irregular eutectics are discussed. For regular eutectics the new model identifies a range of spacing within the limits defined by the minimum undercooling of the alpha and beta phase. For the irregular Al-Si eutectic system in particular we identified two different spacing selection mechanisnis: a) for a particular growth rate, a nearly isothermal interface can be achieved at a unique minimum spacing lambda(sub I); b) the average spacing in the microstructure (lambda(sub av) > lambda(sub I)) is essentially dictated by the undercooling of the faceted phase. Based on the modified theoretical model a semi-empirical expression has been developed to account for the influence of the temperature gradient. The theoretical calculations have been found to be in good agreement with the published experimental measurements.

Catalina, Adrian V.↗

A two-dimensional model of the ionosphere of Venus

While most orbits of the Pioneer Venus Orbiter have indicated a substantial nightside ionosphere, this region virtually disappears, existing only as irregular patches of low density plasma, on those orbits during which the solar wind dynamic pressure is large. There observational results are presently interpreted by means of a two-dimensional theoretical model of the Venus ionosphere in which empirical horizontal velocities are adopted. The degree to which the horizontal transport of ions from day to night can maintain the nightside ionosphere is shown to depend on the flow velocities, together with the ionopause height at the terminator. Attention is also given to the role played by electron precipitation in the support of a nightside ionosphere. Indirect evidence is given for an enhanced deuterium/hydrogen ratio on Venus.

Cravens, T. E.↗

Magnetic flux rope versus the spheromak as models for interplanetary magnetic clouds

Magnetic clouds form a subset of interplanetary ejecta with well-defined magnetic and thermodynamic properties. Observationally, it is well established that magnetic clouds expand as they propagate antisunward. The aim of this paper is to compare and contrast two models which have been proposed for the global magnetic field line topology of magnetic clouds: a magnetic flux tube geometry, on the one hand, and a spheromak geometry (including possible higher multiples), on the other. Traditionally, the magnetic structure of magnetic clouds has been modeled by force-free configurations. In a first step, we therefore analyze the ability of static force-free models to account for the asymmetries observed in the magnetic field profiles of magnetic clouds. For a cylindrical flux tube the magnetic field remains symmetric about closest approach to the magnetic axis on all spacecraft orbits intersecting it, whereas in a spheromak geometry one can have asymmetries in the magnetic field signatures along some spacecraft trajectories. The duration of typical magnetic cloud encounters at 1 AU (1 to 2 days) is comparable to their travel time from the Sun to 1 AU and thus magnetic clouds should be treated as strongly nonstationary objects. In a second step, therefore, we abandon the static approach and model magnetic clouds as self-similarly evolving MHD configurations. In our theory, the interaction of the expanding magnetic cloud with the ambient plasma is taken into account by a drag force proportional to the density and the velocity of expansion. Solving rigorously the full set of MHD equations, we demonstrate that the asymmetry in the magnetic signature may arise solely as a result of expansion. Using asymptotic solutions of the MHD equations, we least squares fit both theoretical models to interplanetary data. We find that while the central part of the magnetic cloud is adequately described by both models, the 'edges' of the cloud data are modeled better by the magnetic flux tube. Further comparisons of the two models necessarily involve thermodynamic properties, since real magnetic configurations are never exactly force-free and gas pressure plays an essential role. We consider a polytropic gas. Our theoretical analysis shows that the self-similar expansion of a magnetic flux tube requires the polytropic index gamma to be less than unity. For the spheromak, however, self-similar, radially expanding solutions are known only for gamma equal to 4/3. This difference, therefore, yields a good way of distinguishing between the two geometries. It has been shown recently that the polytropic relationship is applicable to magnetic clouds and that the corresponding polytropic index is approximately 0.5. This observational result is consistent with the self-similar model of the magnetic flux rope but is in conflict with the self-similar spheromak model.

Farrugia, C. J.↗