Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

In-Situ Observation of the Formation of Laser-Induced Periodic Surface Structures with Extreme Spatial and Temporal Resolution

Irradiation of solid surfaces with intense ultrashort laser pulses represents a unique way of depositing energy into materials. It allows to realize states of extreme electronic excitation and/or very high temperature and pressure and to drive materials close to and beyond fundamental stability limits. As a consequence, structural changes and phase transitions often occur along unusual pathways and under strongly nonequilibrium conditions. Furthermore, due to the inherent multiscale nature—both temporally and spatially—of these irreversible processes, their direct experimental observation requires techniques that combine high temporal resolution with the appropriate spatial resolution and the capability to obtain good quality data on a single pulse/event basis. In this respect, fourth-generation light sources, namely, short wavelength and short pulse free electron lasers (FELs), are offering new and fascinating possibilities. As an example, this chapter will discuss the results of scattering experiments carried out at the FLASH free electron laser at DESY (Hamburg, Germany), which allowed us to resolve laser-induced structure formation at surfaces on the nanometer to submicron length scale and in temporal regimes ranging from picoseconds to several nanoseconds with sub-picosecond resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Seismic Spatial Gradients and Machine Learning-Based Classifiers for Explosion Monitoring (LDRD 218327)

This final report summarizes the work completed under the Laboratory Directed Research and Development (LDRD) project “Seismic Spatial Gradients as a Machine Learning-Based Classifier for Explosion Monitoring.” The overarching goal of the project was to explore the efficacy of using machine learning-based classification algorithms where the input data are the spatial gradient of the seismic wavefield collected at a single point on the Earth’s surface. The methods that I describe here are in direct contrast to conventional methods of seismic discrimination which typically rely on a spatially extended network of instruments and physics-based wavefield attributes such as, for example, the ratio between $\textit{P}$ and $\textit{S}$ waves. Rather, we use the spatial gradient of the seismic wavefield observed at a single point on the Earth’s surface and data processing approaches inspired by the machine learning community. We tested two algorithms, a neural network and a modified version of principal component analysis termed Spectrally Filtered Principal Component Analysis (SFPCA). To test these algorithms, we first conducted a series of numerical tests using synthetic data and then conducted a small-scale controlled field experiment. The tests using synthetic data showed that both algorithms had high success rates on gradiometric data, even when simulated noise was added to the signal. Furthermore, we found that using seismic spatial gradients increased the performance of our discrimination algorithms when compared to using just the traditional translational motion seismic data. The tests with field data also showed a high degree of discriminative success.

58 GEOSCIENCES↗
DOE OSTI2023

Internal Structure of the Central Garlock Fault Zone From Ridgecrest Aftershocks Recorded by Dense Linear Seismic Arrays

Abstract We provide high‐resolution seismic imaging of the central Garlock fault using data recorded by two dense seismic arrays that cross the Ridgecrest rupture zone (B4) and the Garlock fault (A5). Analyses of fault zone head waves and P ‐wave delay times at array A5 show that the Garlock fault is a sharp bimaterial interface with P waves traveling ∼5% faster in the northern crustal block. The across‐fault velocity contrast agrees with regional tomography models and generates clear P ‐wave reflections in waveforms recorded by array B4. Kirchhoff migration of the reflected waves indicates a near‐vertical fault between 2 and 6 km depth. The P ‐wave delay times imply a ∼300‐m‐wide transition zone near the Garlock fault surface trace beneath array A5, offset to the side with faster velocities. The results provide important constraints for derivations of earthquake properties, simulations of ruptures and ground motion, and future imaging studies associated with the Garlock fault.

58 GEOSCIENCES↗
DOE OSTI2021

Multiorbital singlet pairing and d + d superconductivity

Recent experiments in multiband Fe-based and heavy-fermion superconductors have challenged the long-held dichotomy between simple s - and d -wave spin-singlet pairing states. Here, we advance several time-reversal-invariant irreducible pairings that go beyond the standard singlet functions through a matrix structure in the band/orbital space, and elucidate their naturalness in multiband systems. We consider the s τ 3 multiorbital superconducting state for Fe-chalcogenide superconductors. This state, corresponding to a d + d intra- and inter-band pairing, is shown to contrast with the more familiar d + i d state in a way analogous to how the B- triplet pairing phase of 3 He superfluid differs from its A- phase counterpart. In addition, we construct an analog of the s τ 3 pairing for the heavy-fermion superconductor CeCu 2 Si 2 , using degrees-of-freedom that incorporate spin-orbit coupling. Our results lead to the proposition that d -wave superconductors in correlated multiband systems will generically have a fully-gapped Fermi surface when they are examined at sufficiently low energies.

Materials Science↗
DOE OSTI2022

Dynamical electron correlation and the chemical bond. I. Covalent bonds in AH and AF (A = B–F)

Dynamical electron correlation has a major impact on the computed values of molecular properties and the energetics of molecular processes. This study focused on the effect of dynamical electron correlation on the spectroscopic constants ($R$ e , $ω$ e , $D$ e ), and potential energy curves, Δ$E$($R$), of the covalently bound AH and AF molecules, A = B–F. The changes in the spectroscopic constants (Δ$R$ e , Δ$ω$ e , Δ$D$ e ) caused by dynamical correlation are erratic and, at times, even surprising. These changes can be understood based on the dependence of the dynamical electron correlation energies of the AH and AF molecules as a function of the bond distance, i.e., Δ$E$ DEC ($R$). At large $R$, the magnitude of Δ$E$ DEC ($R$) increases nearly exponentially with decreasing $R$, but this increase slows as $R$ continues to decrease and, in many cases, even reverses at very short $R$. The changes in Δ$E$ DEC ($R$) in the region around $R$ e were as unexpected as they were surprising, e.g., distinct minima and maxima were found in the curves of Δ$E$ DEC ($R$) for the most polar molecules. The variations in Δ$E$ DEC ($R$) for $R$ ≲ $R$ e are directly correlated with major changes in the electronic structure of the molecules as revealed by a detailed analysis of the spin-coupled generalized valence bond wave function. In conclusion, the results reported here indicate that we have much to learn about the nature of dynamical electron correlation and its effect on chemical bonds and molecular properties and processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electronic correlation induced expansion of Fermi pockets in δ-plutonium

Plutonium is a critically important material as the behavior of its 5f electrons stands midway between the metalliclike itinerant character of the light actinides and localized atomic-core-like character of the heavy actinides. The δ phase of plutonium (δ-Pu), whereas still itinerant, has a large coherent Kondo peak and strong electronic correlations coming from its near-localized character. Here, using sophisticated Gutzwiller wave function and dynamical mean-field theory correlated theories, we study the Fermi surface and associated mass renormalizations of δ-Pu together with calculations of the de Haas–van Alphen frequencies. We find a large (~200%) correlation induced volume expansion in both the hole and the electron pockets of the Fermi surface in addition to an intermediate mass enhancement. All of the correlated electron theories predict, approximately, the same hole pocket placement in the Brillouin zone, which is different from that obtained in conventional density-functional band-structure theory, whereas the electron pockets from all theories are in, roughly, the same place.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Competing magnetic and nonmagnetic states in monolayer VSe 2 with charge density wave

The field of two-dimensional ferromagnets has been reinvigorated by the discovery of VSe 2 monolayer grown on van der Waals substrates, which is reported to be ferromagnetic with a Curie point higher than 330 K. However, the ferromagnetic and nonmagnetic states of pristine monolayer VSe 2 are highly debated. Here, employing density functional theory, Wannier function calculations, and the band unfolding method, we explore the electronic structure of monolayer VSe 2 with a $\sqrt{3} × \sqrt{7}$ charge density wave (CDW). Certain qualitative aspects of the calculated unfolded band dispersion and unfolded Fermi surface of monolayer VSe 2 with the $\sqrt{3} × \sqrt{7}$ CDW in the nonmagnetic state agree well with previous angle-resolved photoemission spectroscopy results, albeit with uncertainty about whether these experiments probed single or multiple domains. Specifically, we find that an isolated CDW domain naturally induces a strong breaking of the threefold symmetry of the electronic structure. In addition we find that, relative to the undistorted structure, the CDW structure shows a strong competition between nonmagnetic and various magnetic states, with an energy difference less than 5 meV/f.u. For the CDW structure in the antiferromagnetic state, the band dispersions and Fermi surface are similar to those in the nonmagnetic state, while the unfolded bands of the ferromagnetic CDW state display a sizable exchange splitting. These results indicate the possibility of various antiferromagnetic fluctuations in VSe 2 to coexist and compete with ferromagnetic order and the experimentally reported CDW order. In this work, our calculations build insights for exploring the interplay between magnetism and CDW behaviors more generally in transition metal dichalcogenides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Dirac Magnons, Nodal Lines, and Nodal Plane in Elemental Gadolinium

In this report we investigate the magnetic excitations of elemental gadolinium (Gd) using inelastic neutron scattering, showing that Gd is a Dirac magnon material with nodal lines at K and nodal planes at half integer ℓ. We find an anisotropic intensity winding around the K-point Dirac magnon cone, which is interpreted to indicate Berry phase physics. Using linear spin wave theory calculations, we show the nodal lines have nontrivial Berry phases, and topological surface modes. We also discuss the origin of the nodal plane in terms of a screw-axis symmetry, and introduce a topological invariant characterizing its presence and effect on the scattering intensity. Together, these results indicate a highly nontrivial topology, which is generic to hexagonal close packed ferromagnets. We discuss potential implications for other such systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

On-chip optical tweezers based on freeform optics

Since its advent in the 1970s, optical tweezers have been widely deployed as a preferred non-contact technique for manipulating microscale objects. On-chip integrated optical tweezers, which afford significant size, weight, and cost benefits, have been implemented, relying upon near-field evanescent waves. As a result, these tweezers are only capable of manipulation in near-surface regions and often demand high power since the evanescent interactions are relatively weak. We introduce on-chip optical tweezers based on freeform micro-optics, which comprise optical reflectors or refractive lenses integrated on waveguide end facets via two-photon polymerization. The freeform optical design offers unprecedented degrees of freedom to design optical fields with strong three-dimensional intensity gradients, useful for trapping and manipulating suspended particles in an integrated chip-scale platform. We demonstrate the design, fabrication, and measurement of both reflective and refractive micro-optical tweezers. The reflective tweezers feature a remarkably low trapping threshold power, and the refractive tweezers are particularly useful for multiparticle trapping and interparticle interaction analysis. Our integrated micro-optical tweezers uniquely combine a compact footprint, broadband operation, high trapping efficiency, and scalable integration with planar photonic circuits. This class of tweezers is promising for on-chip sensing, cell assembly, particle dynamics analysis, and ion trapping.

Yu, Shaoliang (ORCID:000000026072425X)↗
DOE OSTI2025

Performance Evaluation of Weather@home2 Simulations over West African Region

Weather and climate forecasting, using climate models, have become essential tools and life-savers in the West African region; in spite of the fact that climate models do not fully comply with attributes of forecast qualities—RASAP: reliability, association, skill, accuracy, and precision. The objective of this paper is to quantitatively evaluate, in comparison to CRU and ERA5 datasets, the RASAP compliance-level of the weather@home2 modeling system (w@h2). Findings from some statistical evaluations show that, to a moderately significant extent, w@h2 model provides useful information during the monsoon seasons; skills to capture the Little Dry Season over the Guinea zone; predictive skills for the onset season; ability to reproduce all the annual characteristics of the surface maximum air temperature over the region; as well as skill to detect heat waves that usually ravage West Africa during the boreal spring. The model displays traces of attributes that are needed for seasonal climate predictions and applications. Deficiencies in the quantitative reproducibility point to the facts that the model does provide a reliability akin to that of regional climate models. This paper further furnishes a prospective user with information on whether the model might be “useful or not” for a particular application.

West Africa↗
DOE OSTI2025

Side-by-side evaluation of the outgassing rate and ultimate pressure achieved inside tubes made of low-carbon and stainless steel

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 °C. When the chambers were baked at 400 °C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump to reach “ultimate pressure.” The 1020 low-carbon steel chamber reached lower pressures than the 316L stainless-steel chamber. Monte Carlo simulation predictions using the measured hydrogen outgassing rates are in good agreement with the ultimate pressure measurements. Finally, our measurements indicate that low-carbon steel can provide pressures within the extreme high vacuum range (<7.5 × 10 -13 Torr) if care is taken to minimize the surface area contribution from stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The role of high-order electron correlation effects in a model system for non-valence correlation-bound anions

The diffusion Monte Carlo (DMC), auxiliary field quantum Monte Carlo (AFQMC), and equation-of-motion coupled cluster (EOM-CC) methods are used to calculate the electron binding energy (EBE) of the non-valence anion state of a model (H2O)4 cluster. Two geometries are considered, one at which the anion is unbound and the other at which it is bound in the Hartree–Fock (HF) approximation. It is demonstrated that DMC calculations can recover from the use of a HF trial wave function that has collapsed onto a discretized continuum solution, although larger EBEs are obtained when using a trial wave function for the anion that provides a more realistic description of the charge distribution and, hence, of the nodal surface. For the geometry at which the cluster has a non-valence correlation-bound anion, both the inclusion of triples in the EOM-CC method and the inclusion of supplemental diffuse d functions in the basis set are important. DMC calculations with suitable trial wave functions give EBE values in good agreement with our best estimate EOM-CC result. AFQMC using a trial wave function for the anion with a realistic electron density gives a value of the EBE nearly identical to the EOM-CC result when using the same basis set. For the geometry at which the anion is bound in the HF approximation, the inclusion of triple excitations in the EOM-CC calculations is much less important. The best estimate EOM-CC EBE value is in good agreement with the results of DMC calculations with appropriate trial wave functions.

Upadhyay, Shiv (ORCID:0000000285010501)↗
DOE OSTI2024

Band structure and Fermi surface nesting in LaSb 2

Here we use high-resolution angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) to investigate the electronic structure of the charge density wave (CDW) system LaSb 2 . This compound is among an interesting group of materials that manifests both a CDW transition and lower temperature superconductivity. We find the DFT calculations to be in good agreement with our ARPES data. The Fermi surface of LaSb 2 consists of two small hole pockets close to Γ and four larger pockets near the Brillouin zone boundary. The key features of the Fermi surface do not vary significantly with temperature. A saddle point is present at -0.19 eV below the Fermi level at Γ. Saddle points in the band structure have more pronounced effects on materials properties when they are located closer to the Fermi level, making doped LaSb 2 compounds a potential interesting subject of future research. Multiple peaks are present in the generalized, electronic susceptibility calculations, indicating the presence of three possible nesting vectors. We were not able to detect any signatures of the CDW transition at 355 K down to the lowest temperature of 7 K, pointing to the subtle nature of this transition. This is unusual, given that such a high transition temperature is expected to be associated with the presence of a large CDW gap. This is confirmed through investigation of the Fermi surface and through analysis of momentum distribution curves. It is possible that changes are subtle and occur below current sensitivity of our measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Rock Valley Accelerated Weight Drop Seismic Data Processing and Picking of P-wave and S-wave Arrival Times

Rock Valley, in the southern end of the Nevada National Security Site, hosts a fault system that was responsible for a shallow (< 3 km below surface ) magnitude 3.7 earthquake in May 1993. In order to better understand this system, seismic properties of the shallow subsurface need to be better constrained. In April and May of 2021, accelerated weight drop (AWD) active-source seismic data were recorded in order to measure P- and S-wave travel-times for the area. This report describes the processing and phase picking of the recorded seismic waveforms. In total, we picked 7,982 P-wave arrivals at offsets up to ~2500 m, and 4,369 S-wave arrivals at offsets up to ~2200 m. These travel-time picks can be inverted for shallow P-wave and S-wave velocity structure in future studies.

58 GEOSCIENCES↗
DOE OSTI2023

Soliton formation and topology manipulation of coupled spins via ultrafast re-magnetization

The major goal of the project was to explore the properties of magnetic order driven far out of equilibrium by optical excitations. These include fundamental questions related to the interplay of magnetic, structural and electronic degrees of freedom in materials that are optically excited. These problems break down in short term quenching of the magnetization as a results of the energy of the optical pulse studying how the energy of the optical pulse and the angular momentum of the magnetization flow between the different degrees of freedom. This is followed by the longer time re-emergence of the magnetism as the system cools. Within this goal we explored the formation of solitons, both with and without non-trivial topology, via rapid re-magnetization processes after optical-driven ultrafast demagnetization. Guided by theory, we predict that turbulence and modulational instabilities will drive the formation of solitons, including dispersive shock waves, magnon droplets, and skyrmions. In the case of topological defect formation, i.e. skyrmion generation, related processes have long been predicted based on general principles of symmetry-breaking phase transitions; the density of topological defects in a long-range-ordered phase can be controlled by varying the quench rate through the second-order phase transition, i.e. the Kibble-Zurek (KZ) mechanism. We, more broadly, had the goal to study a range of other emergent magnetic behaviors after optical excitation. While great attention has been given to ultrafast demagnetization, less is known of the subsequent spin dynamics and coupling to the lattice. What is increasingly appreciated is that ultrafast demagnetization leads to spin currents that can carry angular momentum from the rapidly demagnetized sample. These spin currents appear in many ways but fundamentally controls demagnetization, drives interactions between regions of the material, and control the spin resulting structure. They can be probed many ways including THz emission which, in turn, gives insight into the demagnetization processes. Simultaneously if there is magneto-elastic coupling ultrafast demagnetization can drive structural excitations that are not expected from thermal energy added to the lattice. We explored a range of complex phenomena that arise from photo-excitation of magnetic systems with the coupling of electronic, magnetic and structural degrees of freedom. We have made a number of fundamental discoveries that are reflected in our publications list with additional work still being prepared for publication. Highlights of this work include (i) ultra-efficient, nonlinear THz surface acoustics (ii) spin-current-mediated rapid magnon localization and coalescence, (iii) spin-wave soliton formation in ferromagnetic FePt nanoparticles, (iv) dynamic phonon coupling in elemental antiferromagnetic Cr, (v) THz emission from Co/Pt bilayers and FeRh/Pt bilayers, (vi) theoretical investigation of spin hydrodynamics, solitons and shock waves, and (vii) ultrafast perturbation of magnetic domains by optical pumping.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling potential air temperature reductions yielded by cool roofs and urban irrigation in the Kansas City Metropolitan Area

In this work, we evaluate two mitigation strategies for urban heat island (UHI) in the Kansas City Metropolitan Area (KCMA). Using the Weather Research and Forecasting (WRF) model, we assess the potential benefits of reflective “cool” roofs and urban irrigation on air temperature in typical summer conditions between 2011 and 2015, and during six of the strongest historical heat waves from 2005 to 2016. Under the typical summer conditions, we simulate 2-m air temperature for 10 summer weeks, finding average daytime (07:00–19:00 local time) temperature reductions of 0.08 and 0.28 °C for cool roofs and urban irrigation, respectively. During the six heat-wave episodes, we find daytime temperature reductions of 0.02 and 0.26 °C for the two scenarios, similar to those under typical summer conditions. Our results suggest that urban irrigation can be more efficient than cool roofs in mitigating UHI in metropolitan regions where the majority of the land cover is comprised of areas with low urban (i.e., non-vegetated) fractions. Finally, we find the alteration of surface conditions due to enhanced roof albedos influences precipitation within the WRF simulation, in particular during the heat waves. Further research would be necessary to determine the robustness of this last finding.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Detection of Foreign Materials on Broiler Breast Meat Using a Fusion of Visible Near-Infrared and Short-Wave Infrared Hyperspectral Imaging

Foreign material (FM) found on a poultry product lowers the quality and safety of the product. We developed a fusion method combining two hyperspectral imaging (HSI) modalities in the visible-near infrared (VNIR) range of 400–1000 nm and the short-wave infrared (SWIR) range of 1000–2500 nm for the detection of FMs on the surface of fresh raw broiler breast fillets. Thirty different types of FMs that could be commonly found in poultry processing plants were used as samples and prepared in two different sizes (5 × 5 mm 2 and 2 × 2 mm 2 ). The accuracies of the developed Fusion model for detecting 2 × 2 mm 2 pieces of polymer, wood, and metal were 95%, 95%, and 81%, respectively, while the detection accuracies of the Fusion model for detecting 5 × 5 mm 2 pieces of polymer, wood, and metal were all 100%. The performance of the Fusion model was higher than the VNIR- and SWIR-based detection models by 18% and 5%, respectively, when F1 scores were compared, and by 38% and 5%, when average detection rates were compared. The study results suggested that the fusion of two HSI modalities could detect FMs more effectively than a single HSI modality.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Origin of anomalous magnetotransport in kagome superconductors 𝐴⁢V 3 ⁢Sb 5 (𝐴 = K,Rb,Cs)

Multiple anomalous features in electronic spectra of metals with a kagome lattice structure—van Hove singularities, Dirac points, and flat bands—imply that materials containing this structural motif may lie at a nexus of topological and correlated electron physics. Due to the prospects of such exceptional electronic behavior, the recent discovery of superconductivity coexisting with charge-density wave (CDW) order in the layered kagome metals 𝐴⁢V 3 ⁢Sb 5 (𝐴 = K,Rb,Cs) has attracted considerable attention. Notably, these archetypal kagome metals express unconventional magnetotransport behavior, including an unexpected linear-in-𝐻 diagonal resistivity at low fields, and an even more peculiar, nonmonotonic sign-changing behavior of the Hall resistivity, which has been speculated to arise from a chiral CDW. We argue here that this unusual magnetotransport derives not from such unconventional phenomena, but rather from the unique fermiology of the 𝐴⁢V 3 ⁢Sb 5 materials. Specifically, it is caused by a large, concave hexagonal Fermi surface sheet formed in the close proximity to the van Hove singularities, which is backfolded into a small hexagonal sheet and two large triangular sheets in the CDW state. We introduce and analyze a model of the electronic structure of these Fermi surface sheets that allows for a full analytical treatment within Boltzmann kinetic theory and that enables semi-quantitative fits of our transport data. Specifically, we find that the anomalous magnetotransport behavior is caused by the confluence of strong reduction of the Fermi velocity near the van Hove singularities located near the vertices of the hexagonal sheet and sharp corners in Fermi surface generated by the CDW reconstruction. In conclusion, our analytical approach not only explains the anomalous magnetotransport in the kagome superconductors but also can be extended to a variety of metallic systems hosting singular features in their Fermi surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗