Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface waters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗
DOE OSTI2021

Elucidating Hydrogen Reaction-Induced Water Desorption from Oxide-Passivated Metal Surfaces for Plasma Applications

Elucidating the mechanisms responsible for sub-microsecond desorption of water and other impurities from electrode surfaces at high heating rates is crucial for understanding pulsed power behavior. Ionization of desorbed impurities in the vacuum regions causes power or current loss; devising methods to limit such desorption during the short time scale of pulsed power is needed to improve corresponding applications. Previous molecular modeling studies have strongly suggested that, under high vacuum conditions, the amount of water impurity desorbing from oxide surfaces on metal electrodes is at a sub-monolayer level at room temperature, which appears insufficient to explain observed pulsed power energy losses at high current densities. In this work, we apply Density Functional Theory (DFT) techniques to show that hydrogen trapped inside iron metal can diffuse into hematite (α-Fe 2 O 3 ) on the metal surface, ultimately reacting with the oxide to form Fe(II) and H 2 O. The latter desorbs at elevated temperature and may explain the anomalous amount of desorbed impurity inferred from pulsed-power experiments. We also apply a suite of characterization techniques to demonstrate that when iron metal is heated to 650 °C, the dominant surface oxide component becomes α-Fe 2 O 3 . The oxide facets exposed are found to be a mixture of (0001), (10-10), and others, in agreement with the DFT models used.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Impact of Interfacial Structure on Heterogeneous Nucleation of Amorphous Carbonates

For this work, classical molecular dynamics simulations were performed to provide physical insight into the impact of interfacial structure on the heterogeneous nucleation of amorphous calcium carbonate (ACC, CaCO 3 ·H 2 O) and amorphous magnesium carbonate (AMC, MgCO 3 ·H 2 O) by using α-quartz as a model substrate. Interfacial structure and energies were computed for ACC and AMC in contact with the (100), (001), and (101) α-quartz surfaces. The simulations showed α-quartz surfaces drew water molecules out of the carbonate nuclei to form a partial hydration layer. The formation of a partial hydration layer and its disruption to the ACC/AMC structure meant the α-quartz–ACC/AMC interfaces were not energetically favored relative to separate α-quartz–water and ACC/AMC–water interfaces and, thus, homogeneous ACC/AMC nucleation was favored over heterogeneous nucleation. The CMD simulations hence provided an atomic-level explanation for a reported nonclassical growth mechanism whereby carbonate minerals grow via homogeneous nucleation and subsequent surface attachment of amorphous intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Surface temperatures reveal the patterns of vegetation water stress and their environmental drivers across the tropical Americas

Vegetation is a key component in the global carbon cycle as it stores ~450 GtC as biomass, and removes about a third of anthropogenic CO2 emissions. However, in some regions, the rate of plant carbon uptake is beginning to slow, largely because of water stress. Here, we develop a new observation-based methodology to diagnose vegetation water stress and link it to environmental drivers. We used the ratio of remotely sensed land surface to near surface atmospheric temperatures (LST/Tair) to represent vegetation water stress, and built regression tree models (random forests) to assess the relationship between LST/Tair and the main environmental drivers of surface energy fluxes in the tropical Americas. We further determined ecosystem traits associated with water stress and surface energy partitioning, pinpointed critical thresholds for water stress, and quantified changes in ecosystem carbon uptake associated with crossing these critical thresholds. Additionally, we found that the top drivers of LST/Tair, explaining over a quarter of its local variability in the study region, are (1) radiation, in 58% of the study region; (2) water supply from precipitation, in 30% of the study region; and (3) atmospheric water demand from vapor pressure deficits (VPD), in 22% of the study region. Regions in which LST/Tair variation is driven by radiation are located in regions of high aboveground biomass or at high elevations, while regions in which LST/Tair is driven by water supply from precipitation or atmospheric demand tend to have low species richness. Carbon uptake by photosynthesis can be reduced by up to 80% in water-limited regions when critical thresholds for precipitation and air dryness are exceeded simultaneously, that is, as compound events. Our results demonstrate that vegetation structure and diversity can be important for regulating surface energy and carbon fluxes over tropical regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Carbon Dioxide Production in Bedrock Beneath Soils Substantially Contributes to Forest Carbon Cycling

Abstract Soils are widely considered the primary terrestrial organic matter pool mediating carbon transactions with the atmosphere and groundwater. Because soils are both a host and a product of rhizosphere activity, they are thought to mark the location where photosynthetic fixation of carbon dioxide (CO 2 ) is balanced by the oxidation of organic matter. However, in many terrestrial environments, the rhizosphere extends below soils and into fractured bedrock, and it is unknown if the resulting biological and hydrologic dynamics in bedrock have a significant impact on carbon cycling. Here we show substantial production of CO 2 in weathered bedrock at 4–8 m below the thin soils (<0.5 m thick) of a Northern California forest using innovative monitoring technology for sampling gases and water in fractured rock. The deep CO 2 production supports a persistent upward flux of CO 2(g) year‐round from bedrock to soil, constituting between 2% and 29% of the average daily CO 2 efflux from the land surface. When water is rapidly transported across the fractured bedrock vadose zone, nearly 50% of the CO 2 produced in the bedrock dissolves into water, promoting water‐rock interaction and export of dissolved inorganic carbon (DIC) from the unsaturated zone to groundwater, constituting as much as 80% of the DIC exiting the hillslope. Such CO 2 production in weathered bedrock is subject to unique moisture, temperature, biological, and mineralogical conditions which are currently missing from terrestrial carbon models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Superhydrophilicity of $α$-alumina surfaces results from tight binding of interfacial waters to specific aluminols

Understanding the microscopic driving force of water wetting is challenging and important for design of materials. The relations between structure, dynamics and hydrogen bonds of interfacial water can be investigated using molecular dynamics simulations. Here, contact angles at the alumina (0001) and ($11\bar{2}0$) surfaces are studied using both classical molecular dynamics simulations and experiments. To test the superhydrophilicity, the free energy cost of removing waters near the interfaces are calculated using the density fluctuations method. The strength of hydrogen bonds is determined by their lifetime and geometry. Both surfaces are superhydrophilic and the (0001) surface is more hydrophilic. Interactions between surfaces and interfacial waters promote a templating effect whereby the latter are aligned in a pattern that follows the underlying lattice of the surfaces. Translational and rotational dynamics of interfacial water molecules are slower than in bulk water. Hydrogen bonds between water and both surfaces are asymmetric, water-to-aluminol ones are stronger than aluminol-to-water ones. Molecular dynamics simulations eliminate the impacts of surface contamination when measuring contact angles and the results reveal the microscopic origin of the macroscopic superhydrophilicity of alumina surfaces: strong water-to-aluminol hydrogen bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface-modified and oven-dried microfibrillated cellulose reinforced biocomposites: Cellulose network enabled high performance

Microfibrillated cellulose (MFC) is widely used as a reinforcement filler for biocomposites due to its unique properties. However, the challenge of drying MFC and the incompatibility between nanocellulose and polymer matrix still limits the mechanical performance of MFC-reinforced biocomposites. In this study, we used a water-based transesterification reaction to functionalize MFC and explored the capability of oven-dried MFC as a reinforcement filler for polylactic acid (PLA). Remarkably, this oven-dried, vinyl laurate–modified MFC improved the tensile strength by 38 % and Young’s modulus by 71 % compared with neat PLA. Our results suggested improved compatibility and dispersion of the fibrils in PLA after modification. This study demonstrated that scalable water-based surface modification and subsequent straightforward oven drying could be a facile method for effectively drying cellulose nanomaterials. We find that the method helps significantly disperse fibrils in polymers and enhances the mechanical properties of microfibrillar cellulose-reinforced biocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Relaxation dynamics of water in the vicinity of cellulose nanocrystals

Water molecules near cellulose nanocrystals (CNCs; produced via the sulfuric acid-catalyzed hydrolysis of wood pulp) are believed to relax slower than those in the bulk liquid, which may result in unique properties of CNC aqueous dispersions. Herein this study analyzed the polarization behavior of water molecules in CNC aqueous dispersions and other reference samples using a dielectric relaxation spectroscopy (DRS) technique in the microwave frequency range (0.2–20 GHz). As the CNC concentration increases, two slow relaxation components become prominent. The comparison with DRS data of aqueous dispersions of nanoporous silica, polyvinyl alcohol (PVA), and hairy CNC (HCNC) with amorphous chains protruding from both ends suggested that these slow relaxation modes of water near CNC surfaces cannot be attributed to direct hydrogen bonding interactions with the hydroxyl (OH) groups exposed and immobilized at the solid surface. Instead, they are similar to the water molecules interacting with OH groups attached to flexible polymer chains. Molecular dynamics (MD) simulations of the polarization behavior of water near the (110) facet of cellulose Iβ crystals confirmed that the interactions of water molecules with the cellulose crystal surface do not cause slower relaxations in the frequency range studied via the DRS. These results indicated that the CNC surface cannot be depicted with the crystallographic facets of cellulose Iβ; instead, it resembles a polymer-brush surface on which the short glucan residues or fragments of the strong acid-catalyzed hydrolysis process are swollen and extended into the aqueous phase.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Plastic shrinkage of mortars cured with a paraffin-based compound – Bimodal neutron/X-ray tomography study

Early-age drying (immediately after casting) of mortars and the corresponding plastic shrinkage were studied using bimodal neutron/X-ray computed tomography. This novel, correlative 3D imaging mode enabled studying simultaneously and without any source of spurious perturbation the water migration and loss processes together with the corresponding deformations due to plastic shrinkage. Bimodal imaging opens up new possibilities for studying dynamic processes of coupled water transport and deformations in porous solids. The measurements were carried out on model systems (cylindrical mortar specimens with height of 19 mm). The study focused on the effect of a paraffin-based curing compound. Our results confirm that when the curing compound was applied directly onto the drying surface in a sufficient amount, both the evaporation rate and the rate of vertical displacement (settlement) were substantially reduced. The results shed a new light on the mechanisms of plastic shrinkage and the action of curing compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Numerical Analysis of Water Harvesting from Saturated Vapor with the Electrospray Water Droplet Injection in The Solar-Driven Desalination Applications

Solar-driven seawater desalination systems provide freshwater through environmentally friendly and carbon-neutral processes. Air humidification and dehumidification desalination (HDD) systems extract water directly from moist air. This paper focuses on a new solar-driven seawater desalination system that shares some common traits with HDD systems but in which the air is eliminated from the process. Seawater is vaporized by solar thermal radiation in high-performance solar panels. Water vapor flows to a new electro-condensation chamber and passes through a series of electrosprays, which inject small nuclei of freshwater droplets into the vapor clouds. Here, due to dielectrophoresis and electrohydrodynamic flows, the vapor molecules are captured by the charged droplets, and vapor is condensed at the droplet surface. The water vapor condensation was modeled by using the multiphase flow numerical model. The CFD model, which was also experimentally validated, used SprayFoam solver modules available in the Open FOAM® CFD open-source software. In preliminary results, 802 grams/(hr-m2) (grams per hour per unit area) of water was harvested directly from moist air at 24C and 90% relative humidity. The simulation results indicated that freshwater productivity could increase up to 4,000 grams/(hr-m2) for fully saturated air conditions. This represents about 5 times the water productivity rate of current conventional HDD systems today. In addition, energy consumption could be reduced by 80 percent compared to conventional HDD systems.

Electrospray, electro-condensation, solar, droplet↗
DOE OSTI2022

Marine Boundary Layer Decoupling and the Stable Isotopic Composition of Water Vapor

Decoupling of the subcloud layer in stratocumulus-topped marine boundary layers (STMBL) influences low-cloud cover by limiting the supply of water vapor from the surface. However, the relative importance of mixing between surface fluxes and other reservoirs of water vapor as a function of the degree of decoupling is poorly understood. Water vapor transport within the STMBL and its response to decoupling is explored using surface measurements of water vapor isotopic composition that were obtained from Graciosa Island, Azores, during the summer and fall of 2018. The data show an inverse relationship between the decoupling metric, Δq, and the degree of drying from an isotopically depleted water vapor source. The isotopic data require some degree of drying with an isotopically depleted source for coupled conditions, and likely require a small amount of mixing even for strongly decoupled conditions. The data are consistent with mixing between purely local reservoirs of water vapor, subjected to a small amount of condensation and fractionation, and do not require the invocation of large-scale transport of water vapor aloft or additional cloud-formation effects aloft.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Accurate simulation of surfaces and interfaces of ten FCC metals and steel using Lennard–Jones potentials

Abstract The earlier integration of validated Lennard–Jones (LJ) potentials for 8 fcc metals into materials and biomolecular force fields has advanced multiple research fields, for example, metal–electrolyte interfaces, recognition of biomolecules, colloidal assembly of metal nanostructures, alloys, and catalysis. Here we introduce 12-6 and 9-6 LJ parameters for classical all-atom simulations of 10 further fcc metals (Ac, Ca (α), Ce (γ), Es (β), Fe (γ), Ir, Rh, Sr (α), Th (α), Yb (β)) and stainless steel. The parameters reproduce lattice constants, surface energies, water interfacial energies, and interactions with (bio)organic molecules in 0.1 to 5% agreement with experiment, as well as qualitative mechanical properties under standard conditions. Deviations are reduced up to a factor of one hundred in comparison to earlier Lennard–Jones parameters, embedded atom models, and density functional theory. We also explain a quantitative correlation between atomization energies from experiments and surface energies that supports parameter development. The models are computationally very efficient and applicable to an exponential space of alloys. Compatibility with a wide range of force fields such as the Interface force field (IFF), AMBER, CHARMM, COMPASS, CVFF, DREIDING, OPLS-AA, and PCFF enables reliable simulations of nanostructures up to millions of atoms and microsecond time scales. User-friendly model building and input generation are available in the CHARMM-GUI Nanomaterial Modeler. As a limitation, deviations in mechanical properties vary and are comparable to DFT methods. We discuss the incorporation of reactivity and features of the electronic structure to expand the range of applications and further increase the accuracy.

Kanhaiya, Krishan (ORCID:0000000236222655)↗
DOE OSTI2022

Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells

Reversible protonic ceramic electrochemical cells (R-PCECs) are ideally suited for efficient energy storage and conversion; however, one of the limiting factors to high performance is the poor stability and insufficient electrocatalytic activity for oxygen reduction and evolution of the air electrode exposed to the high concentration of steam. Here we report our findings in enhancing the electrochemical activity and durability of a perovskite-type air electrode, Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O 3-δ (BCFN), via a water-promoted surface restructuring process. Under properly-controlled operating conditions, the BCFN electrode is naturally restructured to an Nb-rich BCFN electrode covered with Nb-deficient BCFN nanoparticles. When used as the air electrode for a fuel-electrode-supported R-PCEC, good performances are demonstrated at 650 °C, achieving a peak power density of 1.70 W cm –2 in the fuel cell mode and a current density of 2.8 A cm –2 at 1.3 V in the electrolysis mode while maintaining reasonable Faradaic efficiencies and promising durability.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Influence of Water, Vacuum, and Temperature on Surface Conditions of a Zeolite‐based Molecular Sieve

Molecular sieves such as zeolite-based materials are ubiquitous in industrial separation processes. However, there is a significant gap in understanding the surface properties and adsorption mechanisms for commercial zeolites, as most research focuses on pure zeolite powders rather than industrially relevant forms. Here, this work addresses this gap in understanding by employing advanced characterization techniques, including positron annihilation spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectroscopy, X-ray photoelectron spectroscopy, liquid nitrogen sorption, and Fourier-transform infrared spectroscopy, to investigate the adsorption and desorption behavior of water in commercial zeolite 13X. Our research reveals insights into the pore-filling mechanisms, the impact of material binders on adsorption properties, and the dynamics of hydration and drying processes for zeolites. Monitoring changes on a minute scale allowed the distinction between fast and slow processes leading to sample drying. The identification of positronium bound to Na + ions indicated that water molecules remain in the vicinity of Na + ions after air-drying zeolite 13X. These findings highlight the importance of various environmental conditions in restoring zeolite properties to baseline after hydration, with significant implications for optimizing industrial processes. This work sets the direction for further research aimed at developing more efficient and robust separation techniques.

Beads Binder↗
DOE OSTI2021

Effectiveness of PCE superplasticizers in calcined clay blended cements

Highlights: • Cements containing 0–40 wt% of a calcined clay rich in meta kaolin were studied. • The calcined clay decreases fluidity of the blended cements considerably. • In cement, the calcined clay adsorbs a large amount of Ca{sup 2+} ions. • A common HPEG polycarboxylate superplasticizer fluidizes OPC/CC blends best. • A zwitterionic PCE also fluidizes well and adsorbs in similar amounts as HPEG. The impact of a calcined clay (CC) rich in meta kaolin (~50 wt%) present in composite cements at 0–40% substitution rate for the clinker was studied relative to the dispersing force of different PCE superplasticizers. It was found that CC increases the water demand of the blended cements considerably (+85% for the 60:40 blend vs. neat OPC). Furthermore, PCEs which fluidize OPC best also provide optimal performance in CC blended cements, but require much higher dosages (in OPC/CC 60:40, 4–6 times as compared to neat OPC). In all systems, HPEG-PCE produced superior dispersing performance over anionic MPEG-PCEs. A mechanistic study involving zeta potential measurements revealed that the initially negatively charged calcined clay surface adsorbs huge amounts of Ca{sup 2+} ions from the pore solution, thus facilitating adsorption of anionic PCE superplasticizers. The results signify that commercially available PCE products can effectively fluidize OPC/CC blended cements.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Water Quality Parameters at the Elkhorn Slough National Estuarine Research Reserve (ESNERR)

The following dataset includes water quality and meteorological forcing data between 2003 and 2019 across four Elkhorn Slough National Estuarine Research Reserve (ESNERR) stations. The data are monthly averaged and include orthophosphate, ammonium, Nitrite, Nitrate, Nitrite + Nitrate, Chlorophyll, Temperature of water, Specific Conductance, Salinity, Dissolved Oxygen, Air Temperature and Precipitation. The data were compiled for wavelet and other statistical analyses. All data included herein are associated with the following manuscript: Venkatesh*, S., B. Arora, D. Dwivedi, S. Vezhaperambu, M. V. Ramesh (2021), Temporal Variability of Water Quality Parameters at the Elkhorn Slough Estuary using Wavelets, IEEE Proceedings on 6th International Conference for Convergence in Technology, DOI:10.1109/I2CT51068.2021.9418159.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Visualization of Aluminum Ions at the Mica Water Interface Links Hydrolysis State-to-Surface Potential and Particle Adhesion

When hydrolyzable cations such as aluminum interact with solid-water interfaces, macroscopic interfacial properties (e.g., surface charge and potential) and interfacial phenomena (e.g., particle adhesion) become tightly linked with the microscopic details of ion adsorption and speciation. We use in situ atomic force microscopy to directly image individual aluminum ions at a mica-water interface and show how adsorbate populations change with pH and aluminum activity. Complementary streaming potential measurements then allow us to build a triple layer model (TLM) that links surface potentials to adsorbate populations, via equilibrium binding constants. Our model predicts that hydrolyzed species dominate the mica-water interface, even when unhydrolyzed species dominate the solution. Ab initio molecular dynamics (AIMD) simulations confirm that aluminum hydrolysis is strongly promoted at the interface. The TLM indicates that hydrolyzed adsorbates are responsible for surface-potential inversions, and we find strong correlations between hydrolyzed adsorbates and particle-adhesion forces, suggesting that these species mediate adhesion by chemical bridging.

Legg, Benjamin A.↗