Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ultrafast carrier dynamics in GaN nanorods

We present ultrafast time-resolved optical spectroscopy on GaN nanorods at room temperature. The studied GaN nanorods, with diameters of ∼50 nm and lengths of ∼400 nm, were grown on the silicon substrate. After femtosecond optical pulses excited carriers in the GaN nanorods, the carriers thermalized within a few picoseconds. Subsequently, the electrons are trapped by the surface states on the order of 20 ps. After the surface electric field was reformed in the GaN nanorods, we found the lifetime of the residue carriers in GaN nanorods is longer than 1.7 ns at room temperature, while the lifetime of carriers in GaN thin film is typically a few hundred picoseconds. Our findings indicate that GaN nanorods have higher electrical quality compared with GaN thin film.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bulk and surface characterization of In2O3(001) single crystal

A comprehensive bulk and surface investigation of high-quality In2O3(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. ICP-MS measurements reveal small residues of Pb, Mg and Pt in the crystals. Four-point-probe measurements show a resistivity of 2 0.5 105 cm, which translates into a carrier concentration of 1012 cm-3. The results from X-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) from the previously accepted value of 10.117 . Scanning Tunneling Microscopy (STM) images of a reduced (sputtered/annealed) surface show a step height of 5 , which indicates a preference for one type of surface termination. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 height, which corresponds to a strongly distorted indium lattice. Scanning Tunneling Spectroscopy (STS) reveals a pronounced surface state at the Fermi Level (EF). Photoelectron Spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to activated oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV and an upward band bending of ~0.1 eV is observed for the reduced and oxidized surfaces, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cloud vertical distribution from combined surface and space radar–lidar observations at two Arctic atmospheric observatories

Abstract. Detailed and accurate vertical distributions of cloud properties (such as cloud fraction, cloud phase, and cloud water content) and their changes are essential to accurately calculate the surface radiative flux and to depict the mean climate state. Surface and space-based active sensors including radar and lidar are ideal to provide this information because of their superior capability to detect clouds and retrieve cloud microphysical properties. In this study, we compare the annual cycles of cloud property vertical distributions from space-based active sensors and surface-based active sensors at two Arctic atmospheric observatories, Barrow and Eureka. Based on the comparisons, we identify the sensors' respective strengths and limitations, and develop a blended cloud property vertical distribution by combining both sets of observations. Results show that surface-based observations offer a more complete cloud property vertical distribution from the surface up to 11 km above mean sea level (a.m.s.l.) with limitations in the middle and high altitudes; the annual mean total cloud fraction from space-based observations shows 25–40 % fewer clouds below 0.5 km than from surface-based observations, and space-based observations also show much fewer ice clouds and mixed-phase clouds, and slightly more liquid clouds, from the surface to 1 km. In general, space-based observations show comparable cloud fractions between 1 and 2 km a.m.s.l., and larger cloud fractions above 2 km a.m.s.l. than from surface-based observations. A blended product combines the strengths of both products to provide a more reliable annual cycle of cloud property vertical distributions from the surface to 11 km a.m.s.l. This information can be valuable for deriving an accurate surface radiative budget in the Arctic and for cloud parameterization evaluation in weather and climate models. Cloud annual cycles show similar evolutions in total cloud fraction and ice cloud fraction, and lower liquid-containing cloud fraction at Eureka than at Barrow; the differences can be attributed to the generally colder and drier conditions at Eureka relative to Barrow.

58 GEOSCIENCES↗

Predictability of Malaria Transmission Intensity in the Mpumalanga Province, South Africa, Using Land Surface Climatology and Autoregressive Analysis

There has been increasing effort in recent years to employ satellite remotely sensed data to identify and map vector habitat and malaria transmission risk in data sparse environments. In the current investigation, available satellite and other land surface climatology data products are employed in short-term forecasting of infection rates in the Mpumalanga Province of South Africa, using a multivariate autoregressive approach. The climatology variables include precipitation, air temperature and other land surface states computed by the Off-line Land-Surface Global Assimilation System (OLGA) including soil moisture and surface evaporation. Satellite data products include the Normalized Difference Vegetation Index (NDVI) and other forcing data used in the Goddard Earth Observing System (GEOS-1) model. Predictions are compared to long- term monthly records of clinical and microscopic diagnoses. The approach addresses the high degree of short-term autocorrelation in the disease and weather time series. The resulting model is able to predict 11 of the 13 months that were classified as high risk during the validation period, indicating the utility of applying antecedent climatic variables to the prediction of malaria incidence for the Mpumalanga Province.

Grass, David↗

Secondary particle emission from a ferromagnetic binary compound

Secondary ion emission from an ion-bombarded binary compound in the ferro- and paramagnetic states has been studied using experimental methods and molecular dynamics simulations. The experiments were performed with a widely used NiPd binary compound, which was bombarded by obliquely incident 10-keV Ar ions. It is established that the intensity of Ni{sup +} and Pd{sup +} ion emission from a polycrystalline NiPd sample decreases significantly when it passes from the ferromagnetic to paramagnetic state. This effect is explained by a change in the surface binding energy and density of surface states at the Fermi level and by a cumulative process related to sputtering. The energies and directions of emission of secondary particles from poly- and single-crystalline NiPd samples in the ferromagnetic state have been jointly studied. It is established that the maximum of the polar angular distribution of secondary particles deviates toward the normal to the irradiated surface with a decrease in their energy. A difference in the azimuthal distribution of emitted Ni and Pd particles has been observed during the bombardment of a (001)NiPd crystal face and explained by specific features of correlated collisions. The best agreement of experimental data with the results of molecular dynamics simulations is obtained if the calculations are performed with allowance for an experimentally established modified composition of the three uppermost surface layers [39].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antiferromagnetic order competing with topological state in Ce{sub x}Bi{sub 2−x}Te{sub 3}

The topological surface states in three-dimensional topological insulators are easily tuned by chemical doping, especially by magnetic impurities. We prepared single crystals of Ce{sub x}Bi{sub 2−x}Te{sub 3} with various x (=0.04, 0.06, 0.08, 0.10, and 0.12). The obtained crystals were characterized by X-ray diffraction and scanning electron microscopy. The magnetic susceptibility data revealed that the Ce atoms are well substituted for Bi into Bi{sub 2}Te{sub 3}. From the Curie-Weiss fits, we observed that the effective magnetic moments μ{sub eff} are close to 2.54 μ{sub B} for free Ce ion, and the paramagnetic Curie-Weiss temperatures θ{sub p} are negatively increased from 2.87 K to −59.3 K with increasing x. The magnetization data clearly showed antiferromagnetic orders around T{sub N} = 4.1 K for x ≥ 0.08, where θ{sub p} suddenly increases, and the electrical resistivity is simply metallic and the magnetoresistance is parabolic. Only for x = 0.06, exotic physical properties arising from the topological states were observed such as non-metallic behavior in the electrical resistivity and linear dependence of the magnetoresistance. Moreover, the carrier concentration of x = 0.06 is one order lower than that of x ≥ 0.08. These observations propose that the antiferromagnetic order is strongly competing with the topological state in Ce{sub x}Bi{sub 2−x}Te{sub 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nature-Derived Approach to Oxygen and Chlorine Dual-Vacancies for Efficient Photocatalysis and Photoelectrochemistry

Crystal defect engineering has sparked huge interests owing to their significance for tailoring surface properties, photoelectronic properties, etc. However, conventional methods, e.g., H 2 reduction, can only achieve a single type of vacancy and always suffer from the drawbacks of harsh synthetic condition, complex procedure, and energy consuming. In this paper, we report a green, cost-effective, and scalable nature-derived reduction protocol with extracting solution of green tea and spinach to in situ achieve oxygen and chlorine dual-vacancies in BiOCl (BiO 1– x Cl 1- y ). The introduction of O and Cl vacancies gives rise to enormous amelioration on the crystal structure, electronic band structure, and surface state, thereby resulting in enhanced photoabsorption and a remarkably enhanced surface charge transfer efficiency (11-fold enhancement). Profiting from these merits, BiO 1– x Cl 1– y exhibits highly promoted photocatalytic oxidation ability and an efficient activity for selective CO 2 reduction into CO. Interestingly, continuously adjustable photoresponse and defect level for BiO 1– x Cl 1– y was realized by simply regulating the extract concentration, which can well balance photoabsorption and photoredox driving force. The current synthetic route is demonstrated to be also applicable to BiOBr and BiOI. To verify the role of the current natural antioxidant, BiO 1– x Cl 1– y is also successfully synthesized by the chemicals of extracting solution ingredients. This work exclusively sheds new light on engineering crystal defects via the eco-friendly bioinspired tactics and also provides a reference for promoting photo (electro) chemical property by dual-vacancies cooperation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flat band separation and robust spin Berry curvature in bilayer kagome metals

Kagome materials have emerged as a setting for emergent electronic phenomena that encompass different aspects of symmetry and topology. It is debated whether the XV 6 Sn 6 kagome family (where X is a rare-earth element), a recently discovered family of bilayer kagome metals, hosts a topologically non-trivial ground state resulting from the opening of spin–orbit coupling gaps. These states would carry a finite spin Berry curvature, and topological surface states. Here we investigate the spin and electronic structure of the XV 6 Sn 6 kagome family. We obtain evidence for a finite spin Berry curvature contribution at the centre of the Brillouin zone, where the nearly flat band detaches from the dispersing Dirac band because of spin–orbit coupling. In addition, the spin Berry curvature is further investigated in the charge density wave regime of ScV 6 Sn 6 and it is found to be robust against the onset of the temperature-driven ordered phase. Utilizing the sensitivity of angle-resolved photoemission spectroscopy to the spin and orbital angular momentum, our work unveils the spin Berry curvature of topological kagome metals and helps to define its spectroscopic fingerprint.

36 MATERIALS SCIENCE↗

Electronic structure, and magnetic and superconducting pairing tendencies of the alternating single layer–bilayer stacking nickelate La 5 ⁢Ni 3 ⁢O 11 under pressure

Nickelates have continued to surprise since their unconventional superconductivity was discovered. Recently, the layered nickelate La 5 ⁢Ni 3 ⁢O 11 with hybrid single-layer and bilayer stacking showed superconductivity under high pressure. This compound combines features of single-layer La 2 ⁢NiO 4 and bilayer La 3 ⁢Ni 2 ⁢O 7 , but its pairing mechanism remains to be understood. Motivated by this finding, here we report a comprehensive theoretical study of this system. Our density functional theory calculations reveal that the undistorted P4/mmm phase without pressure is unstable due to three distortion modes. As pressure increases, these modes are suppressed, leading to the high-symmetry P4/mmm phase without NiO 6 octahedron tilting. Moreover, the “charge transfer” between the single-layer and bilayer sublattices was observed, leading to hole doping in the single-layer blocks. Our random-phase approximation calculations indicate a leading 𝑑 𝑥 2 −𝑦 2 -wave pairing state that arises from spin-fluctuation scattering between Fermi surface states mainly originating from the single-layer blocks and additional weaker contributions from the bilayer blocks. These spin fluctuations could be detected by inelastic neutron scattering as a strong peak at 𝐪 = (𝜋,𝜋). Our findings distinguish La 5 ⁢Ni 3 ⁢O 11 from other nickelate superconductors discovered so far and the high-𝑇 𝑐 cuprates. We also discuss both similarities and differences between La 5⁢ Ni 3 ⁢O 11 and other hybrid stacking nickelates.

Zhang, Yang [Univ. of Tennessee, Knoxville, TN (Un↗

Laser angle-resolved photoemission as a probe of initial state k z dispersion, final-state band gaps, and spin texture of Dirac states in the Bi 2 Te 3 topological insulator

Here, we have obtained angle-resolved photoemission (ARPES) spectra from single crystals of the topological insulator material Bi 2 Te 3 using tunable laser spectrometer. The spectra were collected for eleven different photon energies ranging from 5.57 to 6.70 eV for incident light polarized linearly along two different in-plane directions. Parallel first-principles, fully relativistic computations of photo-intensities were carried out using the experimental geometry within the framework of the one-step model of photoemission. Good overall accord between theory and experiment is used to gain insight into how properties of the initial and final state band structures as well as those of the topological surface states and their spin-textures are reflected in the laser-ARPES spectra. In conclusion, our analysis reveals that laser-ARPES is sensitive to both the initial state k z dispersion and the presence of delicate gaps in the final state electronic spectrum.

36 MATERIALS SCIENCE↗

Study of the influence of the sulfide and ultraviolet treatment of the n-i-GaAs surface on the parameters of ohmic contacts

The possibility of improving the parameters of AuGe/Ni- and Ge/Cu-based ohmic contacts to n-i-GaAs by modifying the preliminarily oxidized GaAs surface in a sulfide-containing solution, as well as via the effect of ultraviolet radiation generated with a KrCl excimer lamp on a chalcogenated surface, is studied. It is shown that preliminary oxidation of the n-i-GaAs surface with subsequent chalcogenation makes it possible to decrease the density of the surface states, to increase the reproducibility of the passivation of the surface, and to decrease the reduced contact resistance of the AuGe/Ni ohmic contacts by a factor of 1.5. The treatment of the chalcogenated surface of n-i-GaAs with an ultraviolet radiation with wavelength {lambda} = 222 nm and emission power density W = 12 mW cm{sup -2} performed in vacuum before the deposition of metal layers of the Ge/Cu ohmic contacts makes it possible to decrease the reduced contact resistance by 25-50% andimprove the morphological characteristics of the surface of the contact area.

36 MATERIALS SCIENCE↗

Disorder-driven topological phase transition in B i 2 S e 3 films

Topological insulators (TI) are a phase of matter that host unusual metallic states on their surfaces. Unlike the states that exist on the surface of conventional materials, these so-called topological surfaces states (TSS) are protected against disorder-related localization effects by time reversal symmetry through strong spin-orbit coupling. By combining transport measurements, angle-resolved photo-emission spectroscopy and scanning tunneling microscopy, we show that there exists a critical level of disorder beyond which the TI Bi 2 Se 3 loses its ability to protect the metallic TSS and transitions to a fully insulating state. The absence of the metallic surface channels dictates that there is a change in material’s topological character, implying that disorder can lead to a topological phase transition even without breaking the time reversal symmetry. This observation challenges the conventional notion of topologically-protected surface states, and will provoke new studies as to the fundamental nature of topological phase of matter in the presence of disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Small Polarons and Surface Defects in Metal Oxide Photocatalysts Studied Using XUV Reflection–Absorption Spectroscopy

In photocatalytic transition metal oxides, the surface electronic structure and carrier kinetics are complicated by both charge trapping at defects and self-trapping by small polaron formation. These effects are specific to both the material and the type of defect or surface states involved. Here we review recent studies on ultrafast photoexcited charge carrier dynamics at the surfaces of alpha-Fe 2 O 3 (hematite) and NiO and at the interface of a alpha-Fe 2 O 3 /NiO heterojunction using extreme ultraviolet (XUV) reflection-absorption spectroscopy. We study dynamics of small polaron formation at hematite surfaces showing that the rate of carrier self-trapping is slower than in the bulk due to a greater lattice reorganization energy required for surface polaron formation. We also show that surface dynamics of hematite can be systematically tuned to control carrier transport properties through surface functionalization. To better understand the impact of defects on carrier events, we study charge carrier recombination of NiO. It is shown that O vacancies have no detrimental effect on carrier lifetime while grain boundaries cause fast recombination. Finally, we study a model heterojunction consisting of alpha-Fe 2 O 3 and NiO and find that interfacial charge transfer across these two materials occurs by a two-step mechanism where the interfacial electric field drives fast exciton dissociation followed by hole injection from alpha-Fe2O3 to NiO. Finally, these examples illustrate future opportunities to observe surface electron dynamics in photocatalytic materials with element and chemical state resolution using ultrafast XUV spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure in a transition metal dipnictide TaAs 2

Abstract The family of transition-metal dipnictides has been of theoretical and experimental interest because this family hosts topological states and extremely large magnetoresistance (MR). Recently, T a A s 2 , a member of this family, has been predicted to support a topological crystalline insulating state. Here, by using high-resolution angle-resolved photoemission spectroscopy (ARPES), we reveal both closed and open pockets in the metallic Fermi surface (FS) and linearly dispersive bands on the ( 2 ‾ 01 ) surface, along with the presence of extreme MR observed from magneto-transport measurements. A comparison of the ARPES results with first-principles computations shows that the linearly dispersive bands on the measured surface of T a A s 2 are trivial bulk bands. The absence of symmetry-protected surface state on the ( 2 ‾ 01 ) surface indicates its topologically dark nature. The presence of open FS features suggests that the open-orbit fermiology could contribute to the extremely large MR of T a A s 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic transport properties of a lithium-decorated ZrTe 5 thin film

Through a combination of single crystal growth, experiments involving in situ deposition of surface adatoms, and complimentary modeling, we examine the electronic transport properties of lithiumdecorated ZrTe 5 thin films. We observe that the surface states in ZrTe 5 are robust against Li adsorption. Both the surface electron density and the associated Berry phase are remarkably robust to adsorption of Li atoms. Fitting to the Hall conductivity data reveals that there exist two types of bulk carriers: those for which the carrier density is insensitive to Li adsorption, and those whose density decreases during initial Li depositions and then saturates with further Li adsorption. We propose this dependence is due to the gating effect of a Li-adsorption-generated dipole layer at the ZrTe 5 surface.

36 MATERIALS SCIENCE↗

Measurement of the electrostatic edge effect in wurtzite GaN nanowires

The electrostatic effect of the hexagonal corner on the electronic structure in wurtzite GaN nanowires (NWs) was directly measured using Kelvin probe force microscopy (KPFM). By correlating electrostatic simulations with the measured potential difference between the nanowire face and the hexagonal vertices, the surface state concentration and band bending of GaN NWs were estimated. The surface band bending is important for an efficient design of high electron mobility transistors and for opto-electronic devices based on GaN NWs. This methodology provides a way to extract NW parameters without making assumptions concerning the electron affinity. We are taking advantage of electrostatic modeling and the high precision that KPFM offers to circumvent a major source of uncertainty in determining the surface band bending.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural stability and electronic properties of InSb nanowires: A first-principles study

Using first-principles calculations, we investigate the structural stability and electronic properties of InSb nanowires (NWs). The results show that, in contrast to the bulk InSb phase, wurtzite (WZ) NWs are more stable than zinc-blende (ZB) NWs when the NW diameter is smaller than 10 nm. Nonpassivated ZB and WZ NWs are found to be metallic and semiconducting, respectively. After passivation, both ZB and WZ NWs exhibit direct-gap semiconductor character, and the band gap magnitude of the NWs strongly depends on the suppression of surface states by the charge-compensation ability of foreign atoms to surface atoms. Moreover, the carrier mobility of the NW can be strengthened by halogen passivation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermi level pinning at the Ge(001) surface—A case for non-standard explanation

To explore the origin of the Fermi level pinning in germanium, we investigate the Ge(001) and Ge(001):H surfaces. The absence of relevant surface states in the case of Ge(001):H should unpin the surface Fermi level. This is not observed. For samples with donors as majority dopants, the surface Fermi level appears close to the top of the valence band regardless of the surface structure. Surprisingly, for the passivated surface, it is located below the top of the valence band allowing scanning tunneling microscopy imaging within the band gap. We argue that the well known electronic mechanism behind band bending does not apply and a more complicated scenario involving ionic degrees of freedom is therefore necessary. Experimental techniques involve four point probe electric current measurements, scanning tunneling microscopy, and spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗