Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “supply”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Optimizing Cornell’s future geothermal district heating performance through systems engineering and simulation

Cornell University’s intention to lower its carbon footprint has motivated this engineering evaluation of using low-temperature geothermal energy to supply heat to the campus district energy system. Optimal selection and operation of heat pumps can significantly improve system performance. To support this analysis, we model the quantitative relationships between heat pump configurations and source flow, supply and distribution temperatures, facility heating design options, output heat generation, and carbon abatement outcomes. A systems approach is used for analysis, troubleshooting, and improvement of the model. The result of this effort is a dynamic tool that appropriately responds to hourly thermal demand and communicates energy response for techno-economic analysis. Simulations indicate that a single well-pair in the local Basement Contact Zone reservoir can satisfy almost 68% of annual thermal demand at nearly 20 MWth average capacity while remaining financially competitive compared to conventional heating with levelized cost of heating (LCOH) as low as $4.55/MMBTU ($15.53/MWh th ). A direct-use scheme with heat pump augmentation provided more carbon abatement and 50 to 150% more annual heat supply than one without augmentation. Exploration of three and four well-pair scenarios prove the capability to achieve 50 MW th baseload heating capacity with competitive LCOH and significant carbon reductions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Energy performance evaluation of the ASHRAE Guideline 36 control and reinforcement learning–based control using field measurements

This study evaluates the energy performance of ASHRAE Guideline 36–compliant control (ASHRAE 36 control) and reinforcement learning (RL)–based control through experimental field tests and a simulation study. Three field tests were conducted at Oak Ridge National Laboratory’s commercial building test facility in Oak Ridge, Tennessee: a baseline with a baseline conventional control, a test with ASHRAE 36 control, and a test with RL-based control. The selected ASHRAE 36 controls were trim and respond control, as well as variable air volume (VAV) box control. We compared the measured supply air temperature of the rooftop unit, VAV box supply air temperature, and VAV box supply airflow rate across the three test cases. The field data indicated that ASHRAE 36 controls operated as specified by ASHRAE Guideline 36. Based on these data, ASHRAE 36 control achieved a 45 % reduction in hourly averaged HVAC energy consumption compared with the baseline, and RL-based control achieved a 66 % reduction. These potential annual energy savings were confirmed using a calibrated whole-building energy model. Compared with the baseline, ASHRAE 36 control reduced HVAC energy consumption by 42 %, and RL-based control achieved a 54 % reduction. Furthermore, RL-based control reduced total HVAC energy consumption by 21 % more than ASHRAE 36 control.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Biomass carbon removal can help sustainable aviation fuels achieve on-time arrival

Biofuels, including sustainable aviation and marine fuels, and biomass carbon removal and storage (BiCRS) are often viewed as potentially competing pathways for advancing climate and energy goals. Their comparative economic, environmental, and temporal advantages remain debated. Rather than identifying a “best-use” for biomass, we show that the relative economic advantages of BiCRS versus biofuels exist along a continuum shaped by energy- and decarbonization-focused market conditions. These pathways need not be adversarial: BiCRS can enable, rather than displace, future biofuel deployment. While the lignocellulosic biofuel sector continues to face barriers associated with underdeveloped supply chains and technologies that have not yet been commercialized at scale, emerging BiCRS approaches are comparatively feedstock-flexible, rapidly deployable, and responsive to carbon removal markets. Early BiCRS deployment can help establish reliable biomass supply chains, reducing investment risk for future lignocellulosic biorefineries. By easing initial supply chain constraints, BiCRS can serve as a practical stepping stone toward meeting both near-term carbon removal needs and long-term sustainable fuel objectives under uncertain future market and policy conditions.

bioenvironmental engineering↗
DOE OSTI2024

Techno-economic and life cycle analysis of synthetic natural gas production from low-carbon H 2 and point-source or atmospheric CO 2 in the United States

Synthetic natural gas (SNG) is of great interest in reducing fossil energy consumption while maintaining compatibility with existing NG infrastructure and end-use applications equipment. SNG can be produced using clean H 2 generated from renewable or nuclear energy and CO 2 captured from stationary sources or the atmosphere. In this study, we develop an engineering process model of SNG production using Aspen Plus® and production scales reported by the industry. We examine the levelized cost and life cycle greenhouse gas (GHG) emissions of SNG production under various CO 2 supply scenarios. Considering the higher cost of H 2 transportation compared with CO 2 transportation, we assume that CO 2 feedstock is transported via pipeline to the H 2 production location, which is collocated with the SNG plant. We also evaluate the cost of CO 2 captured from the atmosphere, assuming the direct air capture process can occur near the SNG facility. Depending on the CO 2 supply chain, the levelized cost of SNG is estimated to be in the range of $\$45–76$ per million British thermal units (MMBtu) on a higher heating value (HHV) basis. The SNG production cost may be reduced to $\$27–57$/MMBtu-HHV by applying a tax credit available in the United States for low-carbon H 2 production (45V). With a lower electricity price of 3¢/kWh for water electrolysis and accounting for a 45V tax credit, the SNG cost reaches parity with the cost of fossil NG. Depending on the CO 2 supply chain, SNG can reduce life cycle GHG emissions by 52–88% compared with fossil NG.

03 NATURAL GAS↗
DOE OSTI2022

The Demand-Side Resource Opportunity for Deep Grid Decarbonization

Technological innovations are creating a larger role for demand-side resources in electric grids. The rise of demand-side resources is occurring alongside the efforts to decarbonize grids. The confluence of these two trends has motivated research on the role of demand-side resources in grid decarbonization. Here, we synthesize the demand-side resource literature to develop a coherent and realistic vision for that role. We find that demand-side resources can supplement supply-side approaches to decarbonize grids more quickly and cost effectively. The role of demand-side resources is secondary to that of supply-side resources, and a critical analysis of tradeoffs is required whenever demand-side solutions substitute for supply-side solutions. Nonetheless, our review suggests that demand-side solutions can play a meaningful role, providing around 10%-30% of the resources required for deep decarbonization in domains such as energy, peak capacity, and deployed solar capacity. However, demand-side resources remain underutilized due to several solvable barriers. The urgency imposed by climate change requires that these barriers be addressed to fully realize the demand-side resource opportunity.

decarbonization↗
DOE OSTI2022

A review study of rare Earth, Cobalt, Lithium, and Manganese in Coal-based sources and process development for their recovery

The world’s majority predominantly relies on foreign sources for supplying critical minerals. This renders the countries susceptible to supply chain disruption and urges them to develop alternative sources to compete in technological advancements. Among many proven newly identified sources, coal and coal-based materials present their opportunities. Due to the complex structure of coal, many mineral forms can be found in coal-related sources, including critical element-containing minerals. Among the fifty critical elements and minerals defined by the USGS, the rare earth elements, cobalt, lithium, and manganese, are particularly significant as they have enormous importance in high-technology product development. These critical metals can be found in high concentrations in coal-derived sources, such as coal refuse, coal combustion products, and coal acid mine drainage, and be recovered through various separation techniques. Further, this study aims to advance the understanding of these elements' extraction and commercial potential from coal and coal-related sources and help address the world's challenges in the critical mineral supply chain. The concentrations and occurrences of these four commodities in coal-related sources were first reviewed. Later, their recovery processes were discussed, and a conceptual process flowsheet was proposed to selectively recover the rare earth elements, lithium, cobalt, and manganese from coal-based sources.

58 GEOSCIENCES↗
DOE OSTI2022

The Circular Economy Life Cycle Assessment and Visualization Framework: A Multistate Case Study of Wind Blade Circularity in United States

A circular economy (CE) aims to decouple human activities from economic activities and resource use, and its overall goal is reducing or avoiding negative environmental externalities. The newly developed Circular Economy Lifecycle Assessment and Visualization (CELAVI) framework simulates changes in supply chain environmental impacts as it transitions toward circularity. This study expands CELAVI by incorporating detailed spatial resolution and real-world road routes connecting all facilities within the system. The case study on end-of-life decision making of wind turbine blades in the states of Iowa and Missouri explores how supply chain circularity and environmental impacts are affected by pathway costs and level of wind turbine installations. It demonstrates how high circularity costs might be beneficial for circularity transitions given revenue generated from circular pathways. Finally, impacts have important contributions to the supply chain design and thus show the importance of including detailed spatial resolution in CELAVI and CE studies in general.

circular economy↗
DOE OSTI2026

Circular economy pathways for decarbonizing aluminum and steel automotive body sheet components in the United States

Decarbonizing vehicle production is essential to reducing automotive sector emissions. This study quantifies greenhouse gas (GHG) emissions from aluminum and steel auto-body sheet components produced in the US. It evaluates the effectiveness of circular economy (CE) strategies (greater closed-loop recycling of pre-consumer scrap, post-consumer scrap, and increased manufacturing yields) to reduce supply chain emissions across different process technology and electricity grid decarbonization pathways. We combine dynamic material flow analysis (2025–2050) with cradle-to-gate life-cycle modeling to assess production emissions and the potential reductions associated with the CE strategies under frozen, moderate, and aggressive technology and grid decarbonization scenarios. Current emissions intensities are estimated at approximately 12.3 kg.CO₂eq/kg of aluminum and 4.3 kg.CO₂eq/kg of steel sheet embedded in the vehicle. Under the frozen decarbonization scenario and current levels of circularity, annual emissions attributable to US aluminum and steel auto-body sheet supply chains could rise by 54 % and 18 % respectively by 2050. Rapid deployment of the CE strategies can cut these annual emissions in 2050 by 52 % for aluminum and 44 % for steel. However, scrap quality constraints lead to saturation points, limiting these benefits unless addressed. Aggressive deployment of low-carbon production technologies and a low-carbon grid reduces the relative benefit of implementing the CE strategies; however, even under the aggressive technology and grid decarbonization scenario, the CE strategies reduce annual emissions by a further 23 %-54 % by 2050. These findings highlight the urgent need to integrate CE strategies into the sheet metal supply chain to support decarbonization efforts and help meet climate targets.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Techno-Economic Analysis of decentralized preprocessing systems for fast pyrolysis biorefineries with blended feedstocks in the southeastern United States

This study evaluated the economic feasibility of fast pyrolysis biorefineries fed with blended pine residues and switchgrass in the Southeastern U.S. with different supply chain design. Previous techno-economic analyses (TEA) have focused on either blended biomass or decentralized preprocessing without investigating the impacts of varied process parameters, technology options, and real-world biomass distribution. This study fills the literature gap by modeling scenarios for different biomass blending ratios, biorefinery and preprocessing site (so-called depot) capacities, and alternative preprocessing technologies. High-resolution, real-world geospatial data were analyzed using Geographic Information Systems to facilitate supply chain design and TEA. For a decentralized system, the minimum fuel selling price (MFSP) of biofuel was 3.92–4.33 per gallon gasoline equivalent (GGE), while the MFSP for the centralized biorefinery at the same capacities ranged between 3.75–4.02/GGE. Implementing a high moisture pelleting process depot rather than a conventional pelleting process lowered the MFSP by 0.03–0.17/GGE. Scenario analysis indicated decreased MFSP with increasing biorefinery capacities but not necessarily with increasing depot size. Medium-size depots (500 OMDT/day) achieved the lowest MFSP. Here, this analysis identified the optimal blending ratios for two preprocessing technologies at varied depot sizes. Counterintuitively, increasing the proportion of higher cost switchgrass reduced the MFSP for large biorefineries (>5000 ODMT/day), but increased the MFSP for small biorefineries (1000–2500 ODMT/day). Although the decentralized systems have a higher MFSP based on current analysis, it has other potential benefits such as mitigated supply chain risks and improved feedstock quality that are difficult to be quantified in this TEA.

09 BIOMASS FUELS↗
DOE OSTI2023

Reserve and energy scarcity pricing in United States power markets: A comparative review of principles and practices

Here, errors in forecasting load and renewable-based generation in restructured power systems mean that independent system operators (ISOs) must procure sufficient operating reserves to keep the real-time operation of the system reliable and secure. But when procured reserves turn out to be insufficient in real-time due to the lack of resource capacity or ramp capability, operators often set higher prices for reserves and energy to encourage more supply, and to motivate consumers to decrease usage or shift it to other times. This procedure, which is called scarcity or shortage pricing, is a core feature of U.S. electricity markets. It is receiving increased attention from market designers and stakeholders because scarcity will become more important for spot price formation in the future with the increased penetration of zero-marginal cost renewables, and the shrinking role of fuel costs in setting prices. Scarcity pricing is implemented in various ways by different ISOs. These differences have practical implications for the level of prices and incentives for investment, operations, and demand modification. In this paper, general approaches and specific calculation procedures for reserve and energy scarcity pricing practices and calculations across the seven ISO-based U.S. power markets are reviewed and compared. A consistent terminology is used to facilitate the comparison. Current scarcity pricing practices are grouped into three approaches: (1) imposing an adder after the spot market is run; (2) including stepwise demand curves within market clearing procedures for non-contingency reserve products (e.g., the novel flexiramp product), which tends to yield longer right tails for energy scarcity premium curves; and (3) having stepwise demand curves for traditional contingency reserve products only, which results in shorter right tails in energy scarcity curves. A generic numerical example is presented to highlight the large practical differences among the reserve scarcity pricing approaches and specific implementations. To further investigate factors that contribute the most to demand curves differences among ISOs, a sensitivity analysis is performed. This analysis shows that the largest source of differences among the curves is the scarcity prices assumed in the case of severe scarcity, while the number of steps used and whether flexiramp is considered also yields important differences in scarcity prices. As renewable penetration increases, it will become increasingly crucial to employ administrative demand curves so that spot prices more effectively motivate supply and demand adjustments exactly when and where they are needed. This study shows that the different assumptions yield very different scarcity premiums for reserves and energy, and are likely to provide divergent incentives for resources to respond to shortages. It is concluded that to promote market efficiency, a reserve shortage demand curve should have at least three features: inclusion of the marginal value of reserve products at each shortage level, consideration of the magnitude and probability of supply contingencies, and avoidance of abrupt price discontinuities that can cause excessively volatile market outcomes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Analysis of hydrogen infrastructure for the feasibility, economics, and sustainability of a fuel cell powered data center

Data centers used for internet data services, cloud computing, and/or data storage consume vast amounts of electricity and are increasing rapidly in capacity. Consequently, their power consumption has raised concerns about energy sustainability and environmental impacts. Large-scale, on-site renewable energy could help reduce data centers’ carbon footprint; however, wind and solar power alone cannot provide an uninterrupted power supply to computer servers due to their natural variability. Instead, reliable power integration can be achieved by using fuel cells powered by hydrogen from sustainable resources (e.g., wind and solar energy). Establishing a hydrogen infrastructure will be critical for realizing these benefits and establishing fuel cells as a viable power source for data centers. Here, to facilitate the development of novel carbon-free fuel cell data enters, this paper presents renewable power integrated with hydrogen infrastructures in four scenarios to provide reliable hydrogen supply from production to storage. Various paths were analyzed toward a hydrogen supply infrastructure by determining the proper component sizes and calculating the cost of meeting the server load. We used a microgrid modeling software, Hybrid Optimization of Multiple Energy Resources (HOMER), and studied the feasibility of fuel cell powered data centers employing renewable hydrogen. The modeling results show various renewable integration configurations to meet reliable and sustainable power requirement under four scenarios for a carbon-free data center.

08 HYDROGEN↗
DOE OSTI2021

Could on-site fuel storage economically reduce power plant-gas grid dependence in pipeline constrained areas like New England?

In the Northeastern United States, natural gas supply constraints have led to periods when gas shortages have caused up to a quarter of all unscheduled power plant outages. Dual fuel oil/gas generators or local gas storage might mitigate gas supply shortages. We use historical power plant operational and availability data to develop a supply curve of the costs required for generators to mitigate fuel shortage failures in New England. Based on 2012–2018 data, we find that the historical fuel shortages at approximately 2 GW worth of gas-fired capacity could be mitigated using on-site fuel storage. For comparison, New England’s average reserve margin was 1.7–2.8 GW over our sample period. Oil dual fuel plants would recoup their investment if compensated with a reliability adder of $\$ 3-7$/MWh during their normal operations, while $\$ 7-16$/MWh would incentivize using onsite, compressed natural gas storage. We estimate that the capital expenses associated with the fuel storage options would be less expensive than installing battery backup for resource adequacy at current battery prices.

03 NATURAL GAS↗
DOE OSTI2026

Sustainable Critical Minerals: Mining, Production, and Legacy

Critical minerals (CMs) are required in renewable energy systems, electric vehicles, electronics, and national defense. Global demand has increased rapidly due to energy and digital transitions, and the United States has become increasingly reliant on vulnerable supply chains. Geological scarcity, trade barriers, environmental hurdles, and processing challenges impede domestic CM production growth. Emerging strategies, including circular economy practices and advanced sustainable mining and processing techniques, can mitigate supply chain and economic risks. To advance these approaches, consistent research priorities, policy revisions, and technology investments are required to develop a resilient CM supply. Doing so with a focus on sustainability goals can simultaneously advance domestic economic and technological goals while limiting environmental impacts and supporting global environmental goals.

biomining↗
DOE OSTI2025

Numerical Investigation of Susceptor-Catalyst Design for Ethylene Generation in Radio Frequency Based Reactors

Ethylene is the most widely produced petrochemical component in the world. Whether reactors are heated directly or indirectly via steam, manufacturers use economies of scale to overcome inherent thermodynamic inefficiencies when burning fossil fuels. While allowing large-scale operations to use alternative sources of energy and raw materials, new methods of supplying energy to chemical reactor systems can reduce the energy waste produced by conventional processes. One viable method for effectively supplying energy to reactor systems is electromagnetic (EM) induction heating. Using the properties of radio frequency (RF) waves, heterogeneous catalysts can be precisely targeted for heating inside reactors. Site-selective heating can greatly lower the energy requirements of the process by supplying heat to reaction sites while reducing needless heat transfer elsewhere. In this study, a microscale model was used to help create guidelines for susceptors and catalysts to improve ethylene production. The oxidative dehydrogenation of ethane is investigated by utilizing several catalysts and potential catalyst/susceptor combinations, with heat provided by an EM susceptor. Having the susceptors and catalyst function separately results in higher gradients in both heat and mass transfer, which drives transport through the catalyst region, while still providing adequate heating for endothermic reactions. However, using a susceptive core with a catalyst covering produces the maximum ethylene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Mineralogy–Based Anthropogenic Combustion–Iron Emission Inventory

Atmospheric supply of iron can modulate ocean biogeochemistry, due to its key role in global nitrogen and carbon cycles. Current estimates predict up to 20% of global ocean net primary productivity depends on an atmospheric iron source. Using a technology–based methodology, we revise total and soluble anthropogenic iron emissions and resolve iron into its mineral components, which allows modeling mineral–specific atmospheric reactions. We compare different methodologies for representing anthropogenic iron solubility: measured in mild and strong leaches and estimated using a mineralogy basis and identify the emissions that are most affected by such assumptions. The inclusion of metal smelting as an iron source increases iron emissions by up to 10 times higher in the fine aerosol fraction (smaller than 1 μm) than most previous inventories. Different solubility assumptions alter anthropogenic soluble iron emissions and deposition by a factor of 20 and 10, respectively. Using solubilities measured in mild leaches and calculated by mineralogy give 20–30 Gg/yr anthropogenic emissions and 40–50 Gg/yr deposition, while those measured in strong leaches give 80–440 Gg/yr emissions and 200–450 Gg/yr deposition. Here, this range of anthropogenic soluble iron deposition leads to global soluble iron deposition of 1,900–2,300 Gg/yr when dust, wildfires, and atmospheric processing are included, indicating such assumptions can affect global soluble iron supply by about 30%. In regions where marine primary productivity is iron limited, anthropogenic combustion–iron contributes up to half of the atmospheric soluble iron flux to the North Pacific Ocean but supplies less than 5% to the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Amazon and La Plata River Basins as Moisture Sources of South America: Climatology and Intraseasonal Variability

Abstract Land‐atmosphere interactions are critical for precipitation (PPT) over South America where terrestrial evapotranspiration (ET) constitutes a significant fraction of moisture for rainfall over the ecologically and socio‐economically vital Amazon (AMZ) and La Plata (LPB) river basins. We quantify the contribution of ET from AMZ and LPB to PPT over the continent with a focus on the intraseasonal time scale. Using numerical water tracers embedded in the Weather Research and Forecasting model we track the moisture originating from the two basins. Our findings indicate that approximately 40% of annual rainfall over the eastern foothills of the Andes originates as AMZ ET, and nearly 30% of rainfall over northern Argentina originates as LPB ET. Analysis of moisture transport during both phases of the dominant intraseasonal oscillation pattern over South America reveals an intraseasonal “sloshing” of LPB moisture between the South Atlantic convergence zone (SACZ) and southeastern South America (SESA) regions. AMZ and LPB each supply approximately 6% of moisture for SACZ PPT during periods of intraseasonal enhancement (positive anomalies), highlighting the importance of moisture from the Atlantic Ocean. For the SESA region, LPB supplies 26% of the moisture for PPT during periods of intraseasonal enhancement while AMZ supplies 5%.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Decision making for implementing non-traditional water sources: a review of challenges and potential solutions

Abstract The effects of climate change, population growth, and future hydrologic uncertainties necessitate increased water conservation, new water resources, and a shift towards sustainable urban water supply portfolios. Diversifying water portfolios with non-traditional water sources can play a key role. Rooftop harvested rainwater (RHRW), atmospheric and condensate harvesting, stormwater, recycled wastewater and greywater, and desalinated seawater and brackish water are all currently utilized and rapidly emerging non-traditional water sources. This review explores the status and trends around these non-traditional water sources, and reviews approaches and models for prioritizing, predicting, and quantifying metrics of concern. The analysis presented here suggests that understanding the challenges of location specific scenarios, socioeconomic knowledge gaps, water supply technologies, and/or water management structure is the crucial first step in establishing a model or framework approach to provide a strategy for improvement going forward. The findings of this study also suggest that clear policy guidance and onsite maintenance is necessary for variable water quality concerns of non-traditional sources like harvested rainwater and greywater. In addition, use of stormwater or reuse of wastewater raises public health concerns due to unknown risks and pathogen levels, thus rapid monitoring technologies and transparent reporting systems can facilitate their adoption. Finally, cost structure of desalination varies significantly around the world, largely due to regulatory requirements and local policies. Further reduction of its capital cost and energy consumption is identified as a hurdle for implementation. Overall, models and process analyses highlight the strength of comparative assessments across scenarios and water supply options.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗