Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sunlight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

The dye-sensitized solar cells based on the interconnected ternary cobalt diindium sulfide nanosheet array counter electrode

Highlights: • The ternary CoIn{sub 2}S{sub 4} CE was fabricated by in situ solvothermal synthesis. • The CoIn{sub 2}S{sub 4} CE displays an interconnected nanosheet array structure. • The solvent and In{sub 2.77}S{sub 4} intermediate play key roles on the formation of CoIn{sub 2}S{sub 4}. • DSSC based on the CoIn{sub 2}S{sub 4} CE gives an efficiency of 8.83%. - Abstract: The ternary cobalt diindium sulfide (CoIn{sub 2}S{sub 4}) counter electrode (CE) with interconnected nanosheet array structure is fabricated on the fluorine-doped tin oxide (FTO) substrate by in situ ethanol solvothermal synthesis. The ethanol solvent and In{sub 2.77}S{sub 4} intermediate play important roles on the formation of the interconnected nanosheet array structure. The dye-sensitized solar cell (DSSC) with the optimized ternary CoIn{sub 2}S{sub 4} CE gives an energy conversion efficiency of 8.83%, which is much higher than that of DSSCs based on the binary CoS{sub 2} (6.47%), and In{sub 2.77}S{sub 4} (0.46%) CEs and can be comparable with that of Pt CE (8.19%) under full sunlight illumination (100 mW cm{sup −2}, AM 1.5 G). Except for the intrinsically electrocatalytic activity from the CoIn{sub 2}S{sub 4}, the higher conversion efficiency of CoIn{sub 2}S{sub 4} based DSSC can be attributed to that the interconnected nanosheet array structure provides plentiful catalytic active sites, abundant electron transport channels, and fast electrolyte diffusion.

14 SOLAR ENERGY↗

Ni-doped α-Fe 2 O 3 as electron transporting material for planar heterojunction perovskite solar cells with improved efficiency, reduced hysteresis and ultraviolet stability

We report on high-efficiency planar heterojunction perovskite solar cells (PSCs) employing Ni-doped alpha-Fe2O3 as electron-transporting layer (ETL). The suitable addition of nickel (Ni) dopant could enhance the electron conductivity as well as induce downward shift of the conduction band minimum for alpha-Fe2O3, which facilitate electrons injection and transfer from the conduction band of the perovskite. As a consequence, a substantial reduction in the charge accumulation at the perovskite/ETL interface makes the device much less sensitive to scanning rate and direction, i.e., lower hysteresis. With a reverse scan for the optimized PSC under standard AM-1.5 sunlight illumination, it generates a competitive power conversion efficiency (PCE) of 14.2% with a large short circuit current (J(sc)) of 22.35 mA/cm(2), an open circuit photovoltage (V-oc) of 0.92 V and a fill factor (FF) of 69.1%. Due to the small J-V hysteresis behavior, a higher stabilized PCE up to 11.6% near the maximum power point can be reached for the device fabricated with 4 mol% Ni-doped alpha-Fe2O3 ETL compared with the undoped alpha-Fe2O3 based cell (9.2%). Furthermore, a good stability of devices with exposure to ambient air and high levels of ultraviolet (UV)-light can be achieved. Overall, our results demonstrate that the simple solution-processed Ni-doped alpha-Fe2O3 can be a good candidate of the n-type collection layer for commercialization of PSCs.

14 SOLAR ENERGY↗

Aerogel-based solar thermal receivers

In any solar thermal application, such as solar space heating, solar hot water for domestic or industrial use, concentrating solar power, or solar air conditioning, a solar receiver converts incident sunlight into heat. In order to be efficient, the receiver must ideally absorb the entire solar spectrum while losing relatively little heat. Currently, state-of-the-art receivers utilize a vacuum gap above an absorbing surface to minimize the convection losses, and selective surfaces to reduce radiative losses. Here we investigate a receiver design that utilizes aerogels to suppress radiation losses, boosting the efficiency of solar thermal conversion. Here we predict that receivers using aerogels could be more efficient than vacuum-gap receivers over a wide range of operating temperatures and optical concentrations. Aerogel-based receivers also make possible new geometries that cannot be achieved with vacuum-gap receivers.

14 SOLAR ENERGY↗

Photocatalytic pure water splitting with high efficiency and value by Pt/porous brookite TiO 2 nanoflutes

We report the remarkable production of H 2 and H 2 O 2 from pure water using porous brookite TiO 2 nanoflutes decorated with Pt nanoparticles through two-electron photocatalytic intermediate water splitting (PIWS). The H 2 production rate from deionized water (pH similar to 7.0) was 9.8 +/- 0.6 $\mu$mol mg -1 h -1 , more than 12-fold and 230-fold higher than the reported TiO 2 -based photocatalytic overall water splitting (POWS) and H 2 /H 2 O 2 production systems, respectively. The apparent quantum yields (AQY) value can achieve 43.4%, which is the highest value compared with the reported TiO 2 -based POWS systems and the commercial value for PIWS is similar to 9-fold higher than that for POWS even ignoring the separation cost. The mechanism of the distinct performance was confirmed by DFT and experimental measurements. The present work provides a feasible strategy to significantly improve the process efficiency and value of photocatalytic water splitting in both pure water and seawater using natural sunlight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Black textile with bottom metallized surface having enhanced radiative cooling under solar irradiation

We discuss the cooling performance of garments can play an important role of enabling comfortable human activities under extreme environments. Imparting extra cooling performance to a garment in a passive way is extremely challenging under the sunlight which provides a huge energy influx to the garment, especially made of black colored textile. In this study, a solar-adaptive-textile (SAT) has been designed and experimentally demonstrated. Near-infrared (NIR) transmittance to the human skin from the solar irradiance has been intercepted by incorporating a nanoscale sputtered thin aluminum metal film underneath the textile layer facing the skin. The high-pressure sputtering employed allows a deep penetration of aluminum into the fabric structure for enhanced solar-energy-blocking effect and film stability. The aluminum layer effectively reduces the solar irradiance as well as the thermal radiation from the textile, which gets heated in lieu of the human skin. The outdoor, under-the-sun measurements with a simulated skin showed an outstanding 2 °C cooling effect compared to the normal textile without the metal film, while preserving most of the given textile properties such as colors, air permeability and wicking behavior.

36 MATERIALS SCIENCE↗

Toward solar light-driven photochemical carbon dioxide separation

The feasibility of energy-efficient photochemically driven CO 2 release has been demonstrated in several recent reports, but the regeneration step remains much slower. Recently in Chem, Ahmad et al. reported a fully visible-light-driven CO 2 separation system capable of operating with concentrated sunlight. Here, we discuss this advance and the potential route toward large-scale fully photochemical CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of ambient light spectrum (LED, INC, CFL, Xenon…) on the efficiency of perovskite indoor photovoltaic solar cells for Internet of Things (IoT) applications

This record provides a numerical investigation of a MAGeI₃-based perovskite solar cell with the structure FTO/TiO₂/MAGeI₃/Spiro-OMeTAD, evaluated for both outdoor and indoor light-harvesting applications using the SCAPS-1D simulator. Device performance is analyzed under AM 1.5G sunlight and several artificial light sources, including LED, incandescent, compact fluorescent lamp (CFL), flashlight, and xenon illumination. The study reports initial and optimized power conversion efficiencies and examines the influence of absorber layer thickness and bandgap on device performance under different lighting conditions. The results highlight the potential of MAGeI₃-based perovskite solar cells for indoor energy harvesting and low-power Internet of Things (IoT) applications.

14 SOLAR ENERGY↗

Understanding the Differences in Molecular Conformation of Carbohydrate and Protein in Endosperm Tissues of Grains with Different Biodegradation Kinetics Using Advanced Synchrotron Technology

Conventional 'wet' chemical analyses rely heavily on the use of harsh chemicals and derivatization, thereby altering native seed structures leaving them unable to detect any original inherent structures within an intact tissue sample. A synchrotron is a giant particle accelerator that turns electrons into light (million times brighter than sunlight) which can be used to study the structure of materials at the molecular level. Synchrotron radiation-based Fourier transform IR microspectroscopy (SR-FTIRM) has been developed as a rapid, direct, non-destructive and bioanalytical technique. This technique, taking advantage of the brightness of synchrotron light and a small effective source size, is capable of exploring the molecular chemistry within the microstructures of a biological tissue without the destruction of inherent structures at ultraspatial resolutions within cellular dimensions. This is in contrast to traditional 'wet' chemical methods, which, during processing for analysis, often result in the destruction of the intrinsic structures of feeds. To date there has been very little application of this technique to the study of plant seed tissue in relation to nutrient utilization. The objective of this study was to use novel synchrotron radiation-based technology (SR-FTIRM) to identify the differences in the molecular chemistry and conformation of carbohydrate and protein in various plant seed endosperms within intact tissues at cellular and subcellular level from grains with different biodegradation kinetics. Barley grain (cv. Harrington) with a high rate (31.3%/h) and extent (78%), corn grain (cv. Pioneer) with a low rate (9.6%/h) and extent of (57%), and wheat grain (cv. AC Barrie) with an intermediate rate (23%/h) and extent (72%) of ruminal DM degradation were selected for evaluation. SR-FTIRM evaluations were performed at the National Synchrotron Light Source at the Brookhaven National Laboratory (Brookhaven, NY). These results suggest that SR-FTIRM plus the multivariate analyses can be used to identify spectral features associated with the molecular structure of endosperm from grains with different biodegradation kinetics, especially in relation to protein structure. The Novel synchrotron radiation-based bioanalytical technique provides a new approach for plant seed structural molecular studies at ultraspatial resolution and within intact tissue in relation to nutrient availability.

43 PARTICLE ACCELERATORS↗

Using digital imaging to assess spectral solar-optical properties of complex fenestration materials: A new approach in video-goniophotometry

A large variety of angularly selective fenestration systems have been developed in the past two decades and show great potential in improving visual comfort while reducing energy consumption, especially when combined with spectrally selective properties. Such systems include light-redirecting glazing, shading, film coatings, reflectors and others. To assess the potential of these systems accurately and reliably, one needs to be able to predict in detail how they modify the energy, direction and spectral make-up of solar radiation. For this assessment, spectral (wavelength-dependent) Bidirectional Transmission or Reflection Distribution Functions are used, usually referred to as BTDFs or BRDFs, or more generally BSDFs for Scattering Functions. To enable a faster, cheaper, and continuous investigation of these properties over most of the solar spectrum (400-1700 nm), an innovative goniospectrometric instrument has been created, relying on digital imaging, on light collection by an ellipsoidal half-transparent mirror, and on a filtering method in the visible range to generate spectral radiometric BSDFs. This so-called Heliodome instrument is described in this paper. It enables the performance of new fenestration technologies to be assessed in terms of lighting and solar gains management potential. The rotating table also serves as a heliodon, an architectural design tool for visualizing sunlight distribution inside a scale model and performing analyses on appropriate sun control strategies. The Heliodome's major innovations compared to other devices are to enable an analysis of both the visible and the near-infrared portions of the solar spectrum, to provide spectral as well as photometric light distribution data, and to ensure a continuous investigation of the transmitted or reflected light in a time-efficient way. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Urban heat island in southern Europe: The case study of Hania, Crete

The aim of the present paper is to analyze the results of the urban heat island research for a coastal densely built small Mediterranean town namely Hania, Crete, Greece. The specific research targets to verify the existence, the intensity, the size and the form of the urban heat island phenomenon in the specific region as well as to understand its correlation with the local weather conditions. Nine urban and three rural meteorological stations are used for this study. Temperature and relative humidity measurements are collected from May 26, 2007 until October 24, 2007. In parallel, meteorological data including wind speed and direction, barometric pressure, sunlight and precipitation for the specific region are collected and elaborated for cross-correlation with the appearance of the urban heat island (UHI) phenomenon. During summer period, where the temperature is high, the UHI takes its maximum intensity, of about 8 C. Also, the form of the UHI is strongly influenced from the wind speed and direction. The northern winds expand the UHI front, while the western winds contribute to the UHI reduction. Finally the Discomfort Index (DI) is calculated for the 2007 summer period to indicate the outdoor living conditions. (author)

54 ENVIRONMENTAL SCIENCES↗

A highly efficient light-trapping structure for thin-film silicon solar cells

A highly efficient light-trapping structure, consisting of a diffractive grating, a distributed Bragg reflector (DBR) and a metal reflector was proposed. As an example, the proposed light-trapping structure with an indium tin oxide (ITO) diffraction grating, an a-Si:H/ITO DBR and an Ag reflector was optimized by the simulation via rigorous coupled-wave analysis (RCWA) for a 2.0-{mu}m-thick c-Si solar cell with an optimized ITO front antireflection (AR) layer under the air mass 1.5 (AM1.5) solar illumination. The weighted absorptance under the AM1.5 solar spectrum (A{sub AM1.5}) of the solar cell can reach to 69%, if the DBR is composed of 4 pairs of a-Si:H/ITOs. If the number of a-Si:H/ITO pairs is up to 8, a larger A{sub AM1.5} of 72% can be obtained. In contrast, if the Ag reflector is not adopted, the combination of the optimized ITO diffraction grating and the 8-pair a-Si:H/ITO DBR can only result in an A{sub AM1.5} of 68%. As the reference, A{sub AM1.5} = 31% for the solar cell only with the optimized ITO front AR layer. So, the proposed structure can make the sunlight highly trapped in the solar cell. The adoption of the metal reflector is helpful to obtain highly efficient light-trapping effect with less number of DBR pairs, which makes that such light-trapping structure can be fabricated easily. (author)

14 SOLAR ENERGY↗

Daylight illuminance on horizontal and vertical surfaces for clear skies. Case study of shaded surfaces

This paper presents the results of a study on daylight illuminance levels measured on horizontal and vertical surfaces. Firstly, an attempt to know the behavior of the daylight illumination in a specific area, as the 'Castilla-Leon' region, Spain, is made in order to determine the representative values of this parameter in this geographical area. With this aim, a series of measurements of global illuminance on a horizontal surface and on vertical surfaces oriented to the four cardinal points (N, S, E and W) have been collected and analyzed. In the paper, the daily evolution of this parameter is reported considering different times of the year so that a global annual behavior can be established. The study is focused on clear days. The collected data correspond to 10 min measurements carried out during the year 2007 in a rural area close to the city of Valladolid, Spain, in the mentioned region. In addition to that, the data have been treated in order to analyze the relationship between the global vertical illuminance and the corresponding horizontal illuminance. In case that no direct sunlight is reaching a vertical surface, that is, for a shaded surface, a simple parametric equation is proposed in order to predict the vertical illumination. The expression obtained shows a high correlation coefficient. It relates the ratio between vertical and horizontal illuminances versus the solar altitude; so, it permits to calculate vertical illuminance if horizontal illuminance is known. (author)

14 SOLAR ENERGY↗

Effects of annealing conditions on the photoelectrochemical properties of dye-sensitized solar cells made with ZnO nanoparticles

Dye-sensitized solar cells (DSSCs) were fabricated by using porous ZnO electrodes derived from home-made ZnO nanoparticles. Electrochemical impedance spectra and open-circuit photovoltage decay curves measurements were performed to investigate the photoelectrochemical characteristics of ZnO films annealed at different temperatures. The experimental results indicate that the effects of the bulk traps and the surface states within the ZnO films on the recombination processes of the photoinjected electrons in DSSCs depend on the annealing temperature. The DSSC based on the ZnO electrode annealed at 400 C exhibits an optimal energy conversion efficiency of 3.92% under the illumination of one sun simulated sunlight because the farthest decrease in the effects of both bulk traps and surface states at this film can maintain a lower charge recombination probability. This result indicates that the ZnO film electrode has promising application in the field of DSSCs, and the optimization of porous film fabrication condition is efficient for the improvement of ZnO-based DSSC's performances. (author)

14 SOLAR ENERGY↗

Theoretical solution for light transmission of a bended hollow light guide

Hollow light guides with very high reflective inner surfaces are novel daylight systems that collect sunlight and skylight available on the roof of buildings transporting it into deep or windowless interiors in building cores. Thus the better utilization of daylight can result in energy savings and wellbeing in these enclosed indoor spaces. An analytical complex solution of a straight tube system was solved in the HOLIGILM method with a user-friendly tool available on the http://www.holigilm.info. An even more difficult light flow transport is to be determined in bended tubes usually placed on sloped roofs where a bend is necessary to adjust the vertical pass through the ceilings. This paper presents the theoretical derivation of the model with its graphical representation and coordinate system respecting backward ray-tracing bend distortions. To imagine the resulting illuminance on the horizontal plane element in the interior, the virtual ray (i.e. luminance in an elementary solid angle) has to pass the ceiling diffuser interface, the inner mirror like tube with a bend, through a roof cupola attachment to the element of the sky and sun light source. Due to this complexity and the lengthy derivation and explanations more practical applications will be published later in a separate contribution. (author)

14 SOLAR ENERGY↗

Performance of a silicon photovoltaic module under enhanced illumination and selective filtration of incoming radiation with simultaneous cooling

A promising option to reduce the cost of silicon photovoltaic systems is to concentrate the sunlight incident on the solar cells to increase the output power. However, this leads to higher module temperatures which affects performance adversely and may also cause long term damage. Proper cooling is therefore necessary to operate the system under concentrated radiation. The present work was undertaken to circumvent the problem in practical manner. A suitable liquid, connected to a heat exchanger, was placed in the housing of the photovoltaic module and unwanted wavelengths of solar radiation were filtered out to minimise overheating of the cells. The selection of the liquid was based on factors such as boiling point, transparency towards visible radiation, absorption of infrared and ultraviolet radiation, stability, flow characteristics, heat transfer properties, and electrical nonconductivity. Using a square parabolic type reflector, more than two fold increase in output power was realised on a clear sunny day employing a 0.13 m{sup 2} silicon solar module. Without the cooling arrangement the panel temperature rose uncontrollably. (author)

14 SOLAR ENERGY↗

Illumination of interior spaces by bended hollow light guides: Application of the theoretical light propagation method

To ensure comfort and healthy conditions in interior spaces the thermal, acoustics and daylight factors of the environment have to be considered in the building design. Due to effective energy performance in buildings the new technology and applications also in daylight engineering are sought such as tubular light guides. These allow the transport of natural light into the building core reducing energy consumption. A lot of installations with various geometrical and optical properties can be applied in real buildings. The simplest set of tubular light guide consists of a transparent cupola, direct tube with high reflected inner surface and a ceiling cover or diffuser redistributing light into the interior. Such vertical tubular guide is often used on flat roofs. When the roof construction is inclined a bend in the light guide system has to be installed. In this case the cupola is set on the sloped roof which collects sunlight and skylight from the seen part of the sky hemisphere as well as that reflected from the ground and opposite facades. In comparison with the vertical tube some additional light losses and distortions of the propagated light have to be expected in bended tubular light guides. Recently the theoretical model of light propagation was already published and its applications are presented in this study solving illuminance distributions on the ceiling cover interface and further illuminance distribution on the working plane in the interior. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Energy yield loss caused by dust deposition on photovoltaic panels

Large-scale solar plants are generally located in semi-arid and desert lands where abundant sunlight is available for solar energy con- version. These plants, however, suffer from two major environmental degradation factors: high ambient temperature and high concen- tration of atmospheric dust. Degradation of solar collectors’ performance caused by soiling results in a considerable loss of energy yield in all solar plants of the world. Dust and other particulate accumulation on solar collectors causes transmission loss. This is true with respect to transmission losses in photovoltaic (PV) and concentrated photovoltaic (CPV) systems, and for reflection losses in concen- trated solar power (CSP) systems. We present here a brief review of the energy yield losses caused by dust deposition on solar collectors, with particular emphasis on flat-panel photovoltaic (PV) systems. The review includes some of the major studies reported on energy-yield losses on solar plants in operation in several regions of the world. In addition, laboratory-soiling studies are also included. We report on degradation in the performance of solar plants based on the type of solar collectors, geographical location, local climate, and exposure period of the collectors absent any manual cleaning. An analysis of the advantages of cleaning processes that include natural, manual, automatic, and passive methods is presented. Our objective is to provide solar plant designers with a database for predicting anticipated soiling losses in different parts of the world, and for assessing effective cleaning methods for restoring a system’s energy yield.

14 SOLAR ENERGY↗

A transmissive, spectrum-splitting concentrating photovoltaic module for hybrid photovoltaic-solar thermal energy conversion

Here, a spectrum splitting, transmissive concentrating photovoltaic (tCPV) module is proposed and designed for a hybrid photovoltaic-solar thermal(PV/T) system. This module enables the system to more fully utilize the full spectrum of incoming sunlight. By utilizing III-V triple junction solar cells with bandgaps of 2.1eV/1.7eV/1.4eVin the module, ultraviolet (UV) and visible light will be absorbed and converted to electricity, while infrared (IR) light will pass through and be captured by a solar thermal receiver and stored as heat. The stored heat energy may be dispatched as electricity or process heat, as needed.Numerical analysis based on the Finite Elemental Method (FEM), ray tracing, circuit analysis, device modelling, and more is employed to design this tCPV module. According to these simulations, the tCPV module can perform with overall power conversion efficiency exceeding 43.5% for above bandgap (in-band)light under a standard AM1.5D solar spectrum, under an average concentration ratio of 400 suns.Passive and active cooling methods, keeping cells below 110°C, are also investigated and discussed, indicating that a transparent active cooling design could improve the CPV module efficiency by around 1%(absolute), relative to a passive design,by reducing the maximum cell working temperature by ~16°C. Furthermore, cost analysis shows that installation cost of around 1.9/W–2.2/W could be reached for the tCPV based PV/T system,which shows a competitive economic advantage compared to a more conventional PV with battery system.

14 SOLAR ENERGY↗