Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sublimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Experiments for the determination of convective diffusion heat/mass transfer to burner rig test targets comparable in size to jet stream diameter

The application of a recently formulated vapor transport theory to predict deposition rates of corrosive salts from alkali-seeded combustion gases of a small-capacity, high-velocity, atmospheric-pressure burner rig was hampered by the relatively large dimensions of the cylindrical deposit collector compared to the diameter of the combustion gas stream. The relative dimensions lead to a highly nonadiabatic combustion gas flow around the collector and necessitate two series of experiments. In the first series, mass transfer coefficients are determined by utilizing the naphthalene sublimation technique. The second series of experiments determines the dilution effect on the sodium species concentrations due to the entrainment of ambient air. This second series involves the measurement of the temperature variation along the surface of the collector under steady state conditions. Vapor deposition rates are determined exploiting this information and the results are found to compare favorably with experimentally obtained rates.

Santoro, G. J.↗

On the mass transport properties of the GeSe-GeI4 system under normal and reduced gravity conditions

Previous work on the mass transport rate of the GeSe-GeI4 system has been reevaluated using the mass spectrometric results of Buchan and Rosenberger (1987), and considering the presence of GeSe(s) and GeSe2(s) phases in the source material. The present transport rate study confirms the previously derived dominance of the sublimation of GeSe at lower pressures of GeI4, and of chemical vapor transport at higher pressures of GeI4. It is noted that experimentally observed flux anomalies are model-independent.

Palosz, Witold↗

Vacuum weathering of sulfur - Temperature effects and applications to Io

The effect of surface temperature on the initial transient and subsequent steady-state behavior of the vacuum-sublimation rate and the UV/visible spectral reflectance of frozen sulfur has been investigated. Surface temperature is found to be the dominant parameter controlling the rate of vacuum weathering of sulfur. The present results suggest that any freshly-frozen sulfur deposits on Io at typical Io hotspot temperatures should display major transient changes in color in a matter of hours to days. It is noted that these rapid changes in spectral reflectivity should be readily detectable by future high-resolution synotopic observations of Io spectrum in the UV/visible.

Nash, Douglas B.↗

Why is Pluto bright? Implications of the albedo and lightcurve behavior of Pluto

Several mechanisms accounting for Pluto's high geometric albedo in the presence of CH4 and various radiations are investigated, in light of the hypothesis that the planet must replenish its surface with clean volatiles on a time-scale of less than 20,000 years. Pluto's high albedo is explained by a CH4 snow cover created by orbital atmospheric sublimation and freeze-out cycles. As a result of the 250-year atmospheric regeneration time-scale, large surface CH4 crystals will be deprived of sufficient time for growth; it is predicted that the albedo decline will reverse following a 7-17 year phase lag after perihelion.

Stern, S. Alan↗

Ablation of Martian glaciers

Glacier like landforms are observed in the fretted terrain of Mars in the latitude belts near + or - 42 deg. It was suggested that sublimation or accumulation-ablation rates could be estimated for these glaciers if their shapes were known. To this end, photoclinometric profiles were obtained of a number of these landforms. On the basis of analyses of these profiles, it was concluded that ice is chiefly ablating from these landforms that either are inactive rock-glaciers or have materials within them that are moving exceedingly slowly at this time. These conclusions are consistent with other geologic information. The analyses were performed using a two-dimensional model of an isothermal glacier.

Moore, Henry J.↗

Flow Visualization Techniques for Flight Research

In-flight flow visualization techniques used at the Dryden Flight Research Facility of NASA Ames Research Center (Ames-Dryden) and its predecessor organizations are described. Results from flight tests which visualized surface flows using flow cones, tufts, oil flows, liquid crystals, sublimating chemicals, and emitted fluids have been obtained. Off-surface flow visualization of vortical flow has been obtained from natural condensation and two methods using smoke generator systems. Recent results from flight tests at NASA Langley Research Center using a propylene glycol smoker and an infrared imager are also included. Results from photo-chase aircraft, onboard and postflight photography are presented.

Fisher, David F.↗

Laboratory simulations of comet surfaces

The geometric albedos of frozen mixtures consisting of colloidal silica and carbon black mixed with water have been measured over the wavelength range of 400 to 800 nm to compare with recent observations of Comet Halley. Data were obtained as a function of sample temperature, scattering angle, and wavelength as the frozen samples warmed to 0 C in vacuum. Scattering from water ice, flat black paint, and Kodak white reflectance paint were also measured. Lab simulations show that the change in albedo of the samples show that sublimation of the water from the sample surface can have a major effect on the albedo of a particle/ice sample in the visible. Such processing may have a marked effect on the visible albedo of comet surfaces as well.

Stephens, John R.↗

Evolution of polar stratospheric clouds during the Antarctic winter

The occurrence of Polar Stratospheric Clouds (PSCs), initially inferred from satellite measurements of solar extinction, have now also been noted by the recent scientific expeditions in the Antarctic. The presence of such clouds in the Antarctic has been postulated to play a significant role in the depletion of ozone during the transition from winter to spring. The mechanisms suggested involve both dynamical and chemical processes which, explicity or implicitly, are associated with the ice particles constituting the PSCs. It is, thus, both timely and necessary to investigate the evolution of these clouds and ascertain the nature and magnitude of their influences on the state of the Antarctic stratosphere. To achieve these objectives, a detailed microphysical model of the processes governing the growth and sublimation of ice particles in the polar stratosphere was developed, based on the investigations of Ramaswamy and Detwiler. The present studies focus on the physical processes that occur at temperatures below those required for the onset of ice deposition from the vapor phase. Once these low temperatures are attained, the deposition of water vapor onto nucleation particles becomes extremely significant. First, the factors governing the magnitude of growth and the growth rate of ice particles at various altitudes are examined. Second, the ice phase mechanisms are examined in the context of a column model with altitudes ranging from 100 to 5 mb pressure levels. The column microphysical model was used to perform simulations of the cloud evolution, using the observed daily temperatures. The effect due to the growth of the particles on the radiation fields are also investigated using a one dimensional radiative transfer model. Specifically, the perturbations in the longwave cooling and that in the shortwave heating for the late winter/early spring time period are analyzed.

Ramaswamy, V.↗

Sulfide mineralization: Its role in chemical weathering of Mars

Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produced degradation products in the Martian regolith. By analogy with terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato- and hydroxo-complex ions and sols formed gossans above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite) and silica (opal). Underlying groundwater, now permafrost, contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, etc., which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates and phyllosilicates during dust storms on Mars.

Burns, Roger G.↗

Photochemical and thermal evolution of interstellar/precometary ice analogs

The photochemical and thermal evolution of H2O-, CH3OH-, NH3-, and CO-containing ices whose relative proportions in mixture are consistent with those of interstellar ice are presently studied experimentally. The UV photolysis of these ice analogs invariably generates H2CO, CO2, CO, CH4, and HCO, largely through the photofragmentation of CH3OH. CO and CH4 leave the samples as warmup proceeds to 100 K; most of the parent ice molecules are found to have sublimed upon the reaching of 200 K, with only a mixture of more refractory substances remaining. A residue of CH2 groups remains even after warmup to 300 K.

Allamandola, L. J.↗

An ice-water saturation adjustment

A reasonably accurate and noniterative saturation adjustment scheme is proposed to calculate: (1) the amount of condensation and/or deposition necessary to remove any supersaturated vapor, or (2) the amount of evaporation and/or sublimation necessary to remove any subsaturation in the presence of cloud droplets and/or cloud ice. This proposed scheme can be implemented for a nonhydrostatic cloud model. The derivation of the scheme, an evaluation of its performance, and tests for sensitivity to variations in a few key parameters are presented.

Tao, Wei-Kuo↗

The chemistry of comets

Comets appear to represent a population of rather homogeneous objects. In particular, the original size distribution peaks at a mean diameter of the order of 10 km. Cometary dust grains appear to be made of clusters of extremely fine particles (0.1-1.0 micron) sintered by heat at a variable degree during their perihelion passages. The brightness laws of comets appear to be derived only by the sublimation of water ice or at least of gas hydrates of the clathrate type. Pristine nuclei are likely to be radially undifferentiated; only their crustal surface must be outgassed and sintered by the heat of perihelion passages. Comet Halley is confirmed to be in the same general class as the bright comets of the 1970s. With an organic fraction of 33 percent in the cometary dust, the carbon of Comet Halley is close to cosmic abundances.

Delsemme, A. H.↗

Thermal evolution of Comet P/Tempel 1 - Representing the group of targets for the CRAF and CNSR missions

A numerical definition of the thermal evolution of spherically symmetric models of the nucleus in the orbit of Comet P/Tempel-1 is presently used to ascertain the properties of the outer layers of comets under consideration for the future Comet Rendezvous and Asteroid Flyby and the Comet Nucleus Sample Return missions. Evolutionary sequences are computed for different values of density, dust/ice mass ratio, and the dust fraction not lost with ice sublimation. It is found that inner and outer surface temperatures of the dust mantle are comparatively insensitive to parameter changes, and that the total thickness of the crystalline ice layer between the dust mantle and the amorphous ice core will make it difficult for the comet-mission probes to sample pristine ice.

Bar-Nun, Akiva↗

Cometary environments; Proceedings of Symposium 5, Workshop IV, and Topical Meeting of the 27th COSPAR Plenary Meeting, Espoo, Finland, July 18-29, 1988

Papers on the environment of comets are presented, covering topics such as constraints on the interstellar dust model of comet dust, dust particles and comet nuclei, models of cometary nuclei, subliming gas in the near-nuclear layer of the comet coma, the nucleus and rotation of Comet Halley, the surface albedo of comet nuclei, observational studies on Comet Halley, comet simulations, comet ion composition, and chemical abundances in comets. Additional topics include the O 1D and H2O production rate from comets, collisional coma models, the gas coma of Comet Giacobini-Zinner, IR properties of rough comet grains, studies of Comet Halley by Giotto, the impact of large dust particles on the Vega spacecraft, and carbonaceous materials as components of comet dust. Also, consideration is given to comet plasma boundaries, the comet ionopause, the solar wind-comet interaction, MHD turbulence and particle acceleration in a mass-loaded solar wind, combined first and second order Fermi acceleration at comets, discrete wave packets upstream from the earth and comets, and the visual appearance of comets under varying solar wind conditions.

Gombosi, T. I.↗

Flow visualization techniques for flight research

In-flight flow visualization techniques used at the Dryden Flight Research Facility of NASA Ames Research Center (Ames-Dryden) and its predecessor organizations are described. Results from flight tests which visualized surface flows using flow cones, tufts, oil flows, liquid crystals, sublimating chemicals, and emitted fluids were obtained. Off-surface flow visualization of vortical flow was obtained from natural condensation and two methods using smoke generator systems. Recent results from flight tests at NASA Langley Research Center using a propylene glycol smoker and an infrared imager are also included. Results from photo-chase aircraft, onboard and postflight photography are presented.

Fisher, David F.↗

Remote detection of boundary-layer transition by an optical system

This instrument development program was funded because of the urgent need to measure boundary-layer transition in wind tunnels. In the course of this development program, a prototype was designed, built, and tested. Recent transonic experiments in the Boeing Model Transonic Wind Tunnel show that the interferometer results correlate very well with sublimating chemical tests.

Hall, Robert M.↗

What if chondritic porous interplanetary dust particles are not the real McCoy

To select a target comet for a Comet Nucleus Sample Return Mission (CNSRM) it is necessary to have an experimental data base to evaluate the extent of diversity and similarity of comets. For example, the physical properties (e.g., low density) of chondritic porous (CP) interplanetary dust particles (IDPs) are believed to resemble these properties of cometary dust although it is yet to be demonstrated that the porous structure of CP IDPs is inherent to presolar dust particles stored in comet nuclei. Porous structures of IDPs could conceivably form during sublimation at the surface of active comet nuclei. Porous structures are also obtained during annealing of amorphous Mg-SiO smokes which initially forms porous aggregates of olivine + platey tridymite and which, upon continued annealing, react to fluffy enstatite aggregates. It is therefore uncertain that CP IDPs are entirely composed of unmetamorphosed presolar dust. Conceivably, new minerals and textures may form in situ in nuclei of active comets as a function of their individual thermal history. Unmetamorphosed comet dust is probably structurally amorphous. Thermal annealing of this dust can produce ultra fine-grained minerals and this ultrafine grain size of CP IDPs should be considered in assessments of aqueous alterations that could affect presolar dust in comet nuclei between 200 and 400 K. Devitrification and hydration may occur in situ in ice-dust mixtures and the mantle of active comet nuclei. Devitrification, or uncontrolled crystallization, of amorphous precursor dust can produce a range of chemical compositions of ultrafine-grained minerals and (non-equilibrium) mineral assemblages and textures in dust contained in comet nuclei as a function of period and trajectory of orbit and number of perihelion passages (not considering internal heating). Thus, experimental data on relevant processes and reaction rates between 200 and 400 K are needed in order to evaluate comet selection, penetration depth for sampling device and curation of samples for CNSRM.

Rietmeijer, Frans J. M.↗

Ion bombardment experiments suggesting an origin for organic particles in pre-cometary and cometary ices

During the Giotto and Vega encounters with Comet Halley both organic particles called CHON and energetic ions were detected. The acceleration of ions to hundreds of keV in the vicinity of the bow shock and near the nucleus may be a demonstration of a situation occurring in the early solar system (perhaps during the T Tauri stage) that led to the formation of organic particles only now released. Utilizing a Van de Graaff accelerator and a target chamber having cryogenic and mass spectrometer capabilities, frozen gases were bombarded at 10 K with 175 keV protons with the result that fluffy solid material remains after sublimation of the ice. Initial experiments were carried out with a gas mixture in parts of 170 carbon monoxide, 170 argon, 25 water, 20 nitrogen, and 15 methane formulated to reflect an interstellar composition in experiments involving the freezing out of the products of a plasma. The plasma experiments resulted in a varnish-like film residue that exhibited luminescence when excited with ultraviolet radiation, while the ion bombardment created particulate material that was not luminescent.

Wdowiak, Thomas J.↗