SEARCH · Engineering Papers

Results for “structured model reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Model for Characterization and Optimization of Spectrally Selective Structures to Reduce the Operating Temperature and Improve the Energy Yield of Photovoltaic Modules

Many existing commercially manufactured photovoltaic modules include a cover layer of glass, commonly coated with a single layer antireflection coating (ARC) to reduce reflection losses. As many common photovoltaic cells, including c-Si, CdTe, and CIGS, decrease in efficiency with increasing temperature, a more effective coating would increase reflection of sub-bandgap light while still acting as an antireflection coating for higher energy photons. The sub-bandgap reflection would reduce parasitic sub-bandgap absorption and therefore reduce operating temperature. This reduction under realistic outdoor conditions would lead to an increase in annual energy yield of a photovoltaic module beyond what is achieved by a single layer ARC. However, calculating the actual increase in energy yield provided by this approach is difficult without using time-consuming simulation. Here, we present a time-independent matrix model which can quickly determine the percentage change in annual energy yield of a module with a spectrally selective mirror by comparison to a baseline module with no mirror. The energy benefit is decomposed into a thermal component from temperature reduction and an optical component from increased transmission of light above the bandgap and therefore increased current generation. Time-independent matrix model calculations are based on real irradiance conditions that vary with geographic location and module tilt angle. The absolute predicted values of energy yield improvement from the model are within 0.1% of those obtained from combined ray-tracing and time-dependent finite-element simulations and compute 1000x faster. Uncertainty in the model result is primarily due to effects of wind speed on module temperature. Optimization of the model result produces a 13-layer and a 20-layer mirror, which increase annual module energy yield by up to 4.0% compared to a module without the mirror, varying depending on the module location and tilt angle. Finally, we analyze how spectrally selective mirrors affect the loss pathways of the photovoltaic module.

14 SOLAR ENERGY↗

DOE OSTI2021

Real-time dynamics and structures of supported subnanometer catalysts via multiscale simulations

Understanding the performance of subnanometer catalysts and how catalyst treatment and exposure to spectroscopic probe molecules change the structure requires accurate structure determination under working conditions. Experiments lack simultaneous temporal and spatial resolution and could alter the structure, and similar challenges hinder first-principles calculations from answering these questions. Here, we introduce a multiscale modeling framework to follow the evolution of subnanometer clusters at experimentally relevant time scales. We demonstrate its feasibility on Pd adsorbed on CeO 2 (111) at various catalyst loadings, temperatures, and exposures to CO. We show that sintering occurs in seconds even at room temperature and is mainly driven by free energy reduction. It leads to a kinetically (far from equilibrium) frozen ensemble of quasi-two-dimensional structures that CO chemisorption and infrared experiments probe. CO adsorption makes structures flatter and smaller. High temperatures drive very rapid sintering toward larger, stable/metastable equilibrium structures, where CO induces secondary structure changes only.

36 MATERIALS SCIENCE↗

DOE OSTI2017

In-situ probing of coupled atomic restructuring and metallicity of oxide heterointerfaces induced by polar adsorbates

Microscopic understanding of the surface-controlled conductivity of the two dimensional electron gas at complex oxide interfaces is crucial for developing functional interfaces. We observe conductivity and structural modification using in-situ synchrotron surface x-ray diffraction as the surface of a model LaAlO 3 /SrTiO 3 (001) heterostructure is changed by polar adsorbates. We find that polar adsorbate-induced interfacial metallicity reduces polar distortions in the LaAlO 3 layer. First-principles density functional theory calculations show that surface dipoles introduced by polar adsorbates lead to additional charge transfer and the reduction of polar displacements in the LaAlO 3 layer, consistent with the experimental observations. Our study supports that internal structural deformations controlling functionalities can be driven without the application of direct electrical or thermal bias and offers a route to tuning interfacial properties. Furthermore, these results also highlight the important role of in-situ x-ray scattering with atomic resolution in capturing and exploring structural distortions and charge density changes caused by external perturbations such as chemical adsorption, redox reaction, and generation and/or annihilation of surface defects.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2025

Computational materials assessment of the D/Li-stripping neutron source as a prototypical facility for fusion materials testing

As the US fusion materials community awaits the selection and design of a fusion prototypical neutron source (FPNS), a risk reduction exercise has been conducted to (i) provide an updated materials performance evaluation using state-of-the-art computational materials modeling, (ii) expand on legacy analysis based on pure Fe to other relevant fusion structural materials types, and (iii) ensure that materials response under FPNS operational conditions is consistent with referential fusion reactor conditions. The current paper describes the efforts undertaken to assemble a comprehensive computational methodology that includes neutronics, primary damage calculations, atomistic simulations of displacement cascades, chemical inventory evolution calculations, and a computational thermodynamic analysis of emerging phases during irradiation. Our work extends existing studies in pure Fe to reduced-activation ferritic/martensitic steels, tungsten, silicon carbide, and vanadium alloys. We focus on the single-beam deuteron/lithium-stripping neutron source behind the IFMIF-DONES concept, which we assess against ITER, two DEMO designs, and an ideal pure 14-MeV flux. Our analysis indicates that, within standard uncertainties inherent to the models employed, the DONES concept adequately captures fusion conditions in the four materials analyzed. Our work is intended as a comprehensive irradiation damage analysis of fusion-representative neutron sources, to be used for further neutron source evaluation and fusion facility operation.

Marian, Jaime [Univ. of California, Los Angeles, C↗

DOE OSTI2018

Lactate Racemase Nickel-Pincer Cofactor Operates by a Proton-Coupled Hydride Transfer Mechanism

Lactate racemase (LarA) of Lactobacillus plantarum contains a novel organometallic cofactor with nickel coordinated to a covalently tethered pincer ligand, pyridinium-3-thioamide-5-thiocarboxylic acid mononucleotide, but its function in the enzyme mechanism has not been elucidated. This study presents direct evidence that the nickel-pincer cofactor facilitates a proton-coupled hydride transfer (PCHT) mechanism during LarA-catalyzed lactate racemization. No signal was detected by electron paramagnetic resonance spectroscopy for LarA in the absence or presence of substrate, consistent with a +2 metal oxidation state and inconsistent with a previously proposed proton-coupled electron transfer mechanism. Pyruvate, the predicted intermediate for a PCHT mechanism, was observed in quenched solutions of LarA. A normal substrate kinetic isotope effect (k H /k D of 3.11 ± 0.17) was established using 2-α- 2 H-lactate, further supporting a PCHT mechanism. UV–visible spectroscopy revealed a lactate-induced perturbation of the cofactor spectrum, notably increasing the absorbance at 340 nm, and demonstrated an interaction of the cofactor with the inhibitor sulfite. Here, a crystal structure of LarA provided greater resolution (2.4 Å) than previously reported and revealed sulfite binding to the pyridinium C4 atom of the reduced pincer cofactor, mimicking hydride reduction during a PCHT catalytic cycle. Finally, computational modeling supports hydride transfer to the cofactor at the C4 position or to the nickel atom, but with formation of a nickel-hydride species requiring dissociation of the His200 metal ligand. In aggregate, these studies provide compelling evidence that the nickel-pincer cofactor acts by a PCHT mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Observation of polar vortices in oxide superlattices

The complex interplay of spin, charge, orbital and lattice degrees of freedom provides a plethora of exotic phases and physical phenomena. In recent years, complex spin topologies have emerged as a consequence of the electronic band structure and the interplay between spin and spin-orbit coupling in materials. Here we produce complex topologies of electrical polarization-namely, nanometre-scale vortex-antivortex (that is, clockwise-anticlockwise) arrays that are reminiscent of rotational spin topologies-by making use of the competition between charge, orbital and lattice degrees of freedom in superlattices of alternating lead titanate and strontium titanate layers. Atomic-scale mapping of the polar atomic displacements by scanning transmission electron microscopy reveals the presence of long-range ordered vortex-antivortex arrays that exhibit nearly continuous polarization rotation. Phase-field modelling confirms that the vortex array is the low-energy state for a range of superlattice periods. Within this range, the large gradient energy from the vortex structure is counterbalanced by the corresponding large reduction in overall electrostatic energy (which would otherwise arise from polar discontinuities at the lead titanate/strontium titanate interfaces) and the elastic energy associated with epitaxial constraints and domain formation. These observations have implications for the creation of new states of matter (such as dipolar skyrmions, hedgehog states) and associated phenomena in ferroic materials, such as electrically controllable chirality.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Numerical simulation of the geometrical-optics reduction of CE2 and comparisons to quasilinear dynamics

Zonal flows have been observed to appear spontaneously from turbulence in a number of physical settings. A complete theory for their behavior is still lacking. Recently, a number of studies have investigated the dynamics of zonal flows using quasilinear (QL) theories and the statistical framework of a second-order cumulant expansion (CE2). A geometrical-optics (GO) reduction of CE2, derived under an assumption of separation of scales between the fluctuations and the zonal flow, is studied here numerically. The reduced model, CE2-GO, has a similar phase-space mathematical structure to the traditional wave-kinetic equation, but that wave-kinetic equation has been shown to fail to preserve enstrophy conservation and to exhibit an ultraviolet catastrophe. CE2-GO, in contrast, preserves nonlinear conservation of both energy and enstrophy. We show here how to retain these conservation properties in a pseudospectral simulation of CE2-GO. We then present nonlinear simulations of CE2-GO and compare with direct simulations of quasilinear (QL) dynamics. Furthermore, we find that CE2-GO retains some similarities to QL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Active learning approach to simulations of strongly correlated matter with the ghost Gutzwiller approximation

Quantum embedding (QE) methods such as the ghost Gutzwiller approximation (gGA) offer a powerful approach to simulating strongly correlated systems, but come with the computational bottleneck of computing the ground state of an auxiliary embedding Hamiltonian (EH) iteratively. In this work, we introduce an active learning (AL) framework integrated within the gGA to address this challenge. The methodology is applied to the single-band Hubbard model and results in a significant reduction in the number of instances where the EH must be solved. Through a principal component analysis (PCA), we find that the EH parameters form a low-dimensional structure that is largely independent of the geometric specifics of the systems, especially in the strongly correlated regime. Our AL strategy enables us to discover this low-dimensionality structure on the fly, while leveraging it for reducing the computational cost of gGA, laying the groundwork for more efficient simulations of complex strongly correlated materials. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2025

Study of CORC Conductors With Respect to Individual Tape Properties

CEA has been studying the advantages of a conductor based on an assembly of CORC cables in the high field zone of a hybrid Central Solenoid (CS) magnet for EU-DEMO. To this end, the detailed study of geometrical and electrical parameters of a CORC structure are studied in order to evaluate the cable’s electrical performance as well as to determine a number of important parameters (crossing points, contact surface etc…) as function of the cable structure. The paper first presents these geometrical and performance analyses. It will then try to introduce smeared models in order to reduce the cable’s performance to 1D tape scaling law using effective parameters. That reduction is of importance for use in thermohydraulic models. Finally, the paper will present the case study of a particular CORC conductor that is being procured and is foreseen to be tested in SULTAN in 2025. The paper also will try to give some predictive estimate of the cable performance and identify some of the unknowns related to current redistribution and joint resistance.

CORC↗

NASA NTRS1981

Engine isolation for structural-borne interior noise reduction in a general aviation aircraft

Engine vibration isolation for structural-borne interior noise reduction is investigated. A laboratory based test procedure to simulate engine induced structure-borne noise transmission, the testing of a range of candidate isolators for relative performance data, and the development of an analytical model of the transmission phenomena for isolator design evaluation are addressed. The isolator relative performance test data show that the elastomeric isolators do not appear to operate as single degree of freedom systems with respect to noise isolation. Noise isolation beyond 150 Hz levels off and begins to decrease somewhat above 600 Hz. Coupled analytical and empirical models were used to study the structure-borne noise transmission phenomena. Correlation of predicted results with measured data show that (1) the modeling procedures are reasonably accurate for isolator design evaluation, (2) the frequency dependent properties of the isolators must be included in the model if reasonably accurate noise prediction beyond 150 Hz is desired. The experimental and analytical studies were carried out in the frequency range from 10 Hz to 1000 Hz.

Unruh, J. F.↗

NASA NTRS1981

Aerodynamics/ACEE: Aircraft energy efficiency

An overview is presented of a 10 year program managed by NASA which seeks to make possible the most efficient use of energy for aircraft propulsion and lift as well as provide a technology that can be used by U.S. manufacturers of air transports and engines. Supercritical wings, winglets, vortex drag reduction, high lift, active control, laminar flow control, and aerodynamics by computer are among the topics discussed. Wind tunnel models in flight verification of advanced technology, and the design, construction and testing of various aircraft structures are also described.

Source record↗

NASA NTRS1987

A new simulation model building process for use in dynamic systems integration research

A framework to build simulation models for aircraft dynamic systems integration is described. The objective of the framework is increased simulation model fidelity and reduced time required to develop and modify these models. The equations of motion for an elastic aircraft and their impact on the framework are discussed in broad terms. A software tool which automatically generates FORTRAN routines for tabular data lookups, the language used to develop a simulation model, and the structures for passing information into a simulation are discussed. A simulation variable nomenclature is presented. The framework has been applied to build an open-loop F/A-18 simulation model. This example model is used to illustrate model reduction issues. Current deficiencies in the framework are identified as areas for future research.

Arbuckle, P. Douglas↗

NASA NTRS1988

A computational strategy for making complicated structural problems simple

An effective computational strategy is presented for the analysis of large and complex structures. The strategy is based on generating the response of the complex structure using large perturbations from that of a lower-order (simpler) model associated with a simpler structure (or a simpler mathematical/discrete model of the original structure). The three key elements of the strategy are: (a) mixed (or primitive variable) formulation with the fundamental unknowns consisting of generalized displacements and stress parameters; (2) operator splitting, or a reduction method to relate the arrays and degrees of freedom of the original complex structure ot those of the simpler system; and (3) efficient iterative process for the generation of the response of the complex structure starting from that of the simpler system. The effectiveness of the proposed strategy is demonstrated by means of two numerical examples.

Noor, Ahmed K.↗

NASA NTRSDate not supplied

TPSAS-NF1676L-15304-DND

The Subsonic Fixed Wing Project conducts research to improve prediction methods and technologies that will produce lower noise, lower emissions, and higher performing subsonic aircraft for the Next Generation Air Transportation System. Subproject: FW Structural Efficiency: Lightweight, multi-objective and multifunctional structures (e.g., structures that can carry load and attenuate noise at the same time) are being developed to reduce the weight of both airframes and engines. Adaptive and flexible wing structures with aeroelastic tailoring offer significant weight reduction due to the elimination of a heavy actuation system. Extensive use of polymer matrix composites (PMCs) in airframe and engine structures (where applicable) will offer significant weight reduction opportunities. Research on composite technology is focused on developing alternate processes that will enable fabrication of large structures, increasing the temperature capability toward greater usage in engine and supersonic airframe structures, developing advanced structural concepts, and modeling damage initiation and progression in composite structures.

Jason P Moore↗

DOE OSTI2019

Streamflow Reconstruction in the Upper Missouri River Basin Using a Novel Bayesian Network Model

A Bayesian model that uses the spatial dependence induced by the river network topology, and the leading principal components of regional tree ring chronologies for paleo-streamflow reconstruction is presented. In any river basin, a convergent, dendritic network of tributaries come together to form the main stem of a river. Consequently, it is natural to think of a spatial Markov process that recognizes this topological structure to develop a spatially consistent basin-scale streamflow reconstruction model that uses the information in streamflow and tree ring chronology data to inform the reconstructed flows, while maintaining the space-time correlation structure of flows that is critical for water resource assessments and management. Given historical data from multiple streamflow gauges along a river, their tributaries in a watershed, and regional tree ring chronologies, the model is fit and used to simultaneously reconstruct the full network of paleo-streamflow at all gauges in the basin progressing upstream to downstream along the river. Our application to 18 streamflow gauges in the Upper Missouri River Basin shows that the mean adjusted R 2 for the basin is approximately 0.5 with good overall cross-validated skill as measured by five different skill metrics. The spatial network structure produced a substantial reduction in the uncertainty associated with paleo-streamflow as one proceeds downstream in the network aggregating information from upstream gauges and tree ring chronologies. Uncertainty was reduced by more than 50% at six gauges, between 6% and 50% at one gauge, and by less than 5% at the remaining 11 gauges when compared with the traditional principal component regression reconstruction model.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2016

Communication: Hydrogen bonding interactions in water-alcohol mixtures from X-ray absorption spectroscopy

While methanol and ethanol are macroscopically miscible with water, their mixtures exhibit negative excess entropies of mixing. Despite considerable effort in both experiment and theory, there remains significant disagreement regarding the origin of this effect. Different models for the liquid mixture structure have been proposed to address this behavior, including the enhancement of the water hydrogen bonding network around the alcohol hydrophobic groups and microscopic immiscibility or clustering. We have investigated mixtures of methanol, ethanol, and isopropanol with water by liquid microjet X-ray absorption spectroscopy on the oxygen K-edge, an atom-specific probe providing details of both inter- and intra-molecular structure. The measured spectra evidence a significant enhancement of hydrogen bonding originating from the methanol and ethanol hydroxyl groups upon the addition of water. These additional hydrogen bonding interactions would strengthen the liquid-liquid interactions, resulting in additional ordering in the liquid structures and leading to a reduction in entropy and a negative enthalpy of mixing, consistent with existing thermodynamic data. In contrast, the spectra of the isopropanol-water mixtures exhibit an increase in the number of broken alcohol hydrogen bonds for mixtures containing up to 0.5 water mole fraction, an observation consistent with existing enthalpy of mixing data, suggesting that the measured negative excess entropy is a result of clustering or micro-immiscibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2018

Natural Frequency Testing and Model Correlation of Rocket Engine Structures in Liquid Hydrogen - Phase I, Cantilever Beam

Many structures in the launch vehicle industry operate in liquid hydrogen (LH2), from the hydrogen fuel tanks through the ducts and valves and into the pump sides of the turbopumps. Calculating the structural dynamic response of these structures is critical for successful qualification of this hardware, but accurate knowledge of the natural frequencies is based entirely on numerical or analytical predictions of frequency reduction due to the added-fluid-mass effect because testing in LH2 has always been considered too difficult and dangerous. This fluid effect is predicted to be approximately 4-5% using analytical formulations for simple cantilever beams. As part of a comprehensive test/analysis program to more accurately assess pump inducers operating in LH2, a series of frequency tests in LH2 were performed at NASA/Marshall Space Flight Center's unique cryogenic test facility. These frequency tests are coupled with modal tests in air and water to provide critical information not only on the mass effect of LH2, but also the cryogenic temperature effect on Young's Modulus for which the data is not extensive. The authors are unaware of any other reported natural frequency testing in this media. In addition to the inducer, a simple cantilever beam was also tested in the tank to provide a more easily modeled geometry as well as one that has an analytical solution for the mass effect. This data will prove critical for accurate structural dynamic analysis of these structures, which operate in a highly-dynamic environment.

Brown, Andrew M.↗

DOE OSTI2022

Reduction of a Heme Cofactor Initiates N -Nitroglycine Degradation by NnlA

Linear nitramines are potentially carcinogenic environmental contaminants. The NnlA enzyme from Variovorax sp. strain JS1663 degrades the nitramine N-nitroglycine (NNG)—a natural product produced by some bacteria—to glyoxylate and nitrite (NO 2 –). Ammonium (NH 4 +) was predicted as the third product of this reaction. A source of nonheme Fe II was shown to be required for initiation of NnlA activity. However, the role of this Fe II for NnlA activity was unclear. This work reveals that NnlA contains a b-type heme cofactor. Reduction of this heme—either by a nonheme iron source or dithionite—is required to initiate NnlA activity. Therefore, Fe II is not an essential substrate for holoenzyme activity. Our data show that reduced NnlA (Fe II -NnlA) catalyzes at least 100 turnovers and does not require O 2 . Finally, NH 4 + was verified as the third product, accounting for the complete nitrogen mass balance. Size exclusion chromatography showed that NnlA is a dimer in solution. Additionally, Fe II -NnlA is oxidized by O 2 and NO 2 – and stably binds carbon monoxide (CO) and nitric oxide (NO). These are characteristics shared with heme-binding PAS domains. Furthermore, a structural homology model of NnlA was generated using the PAS domain from Pseudomonas aeruginosa Aer2 as a template. The structural homology model suggested His 73 is the axial ligand of the NnlA heme. Site-directed mutagenesis of His 73 to alanine decreased the heme occupancy of NnlA and eliminated NNG activity, validating the homology model. We conclude that NnlA forms a homodimeric heme-binding PAS domain protein that requires reduction for initiation of the activity.

59 BASIC BIOLOGICAL SCIENCES↗