Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural settings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Core-Shell Oxidative Aromatization Catalysts for Single Step Liquefaction of Distributed Shale Gas (Final Technical Report)

The objective of this project was to design and demonstrate a core-shell structured multifunctional catalyst to convert the light (dry) components of shale gas into liquid aromatic compounds (primarily benzene and toluene) in a single step. Operated in a modular oxidative aromatization system (OAS) under a cyclic redox scheme, the novel catalyst and process can significantly improve the value and transportability of distributed shale gas. Since the project started, each quarter addressed a different set of tasks related to the completion of the milestone detailed in the project award. The yearly summaries of these tasks are summarized below: Q1-Q4: • Conducted project planning and literature search. • Investigated a number of SHC redox catalysts using thermogravimetric analysis and fixed-bed reactor experiments. • Initiated process modeling towards generating two process models for the methane DHA base case and OAS process. • Developed DHA catalysts capable of producing >500 g/kg-cat-hr aromatics at 80% or greater aromatics selectivity at 700°C. Q5-Q8: • Developed alternative approaches with sequential bed configurations to enhance the aromatic yields based on OCM+DHA • Improved the zeolite synthesis efficiency by using the microwave-assisted technique and investigated the synthesis conditions on the zeolite yield, crystalline structure and morphology • Constructed a set of Aspen Plus process models with significant energy savings for OAS as compared to the base case non-oxidative DHA. • Adapted conventional hydrothermal method to be applicable to the microwave synthesizer unit for more efficient catalyst synthesis. • Studied the structure of the OCM catalyst and the dispersion of the carbonate in the redox reactions and in methane flow with Raman Spectroscopy. Q9-Q12: • Scaled up the catalyst synthesis with the microwave synthesis method. Based on its performance, procedural characterizations and catalytic performance testing were further conducted for the new microwave synthesized catalysts with the newly-developed product analysis procedure. • Developed the reaction system setup for the C2-DHA or OCM+DHA reaction product and achieved a better product collection-analysis method for the aromatic products with an improved carbon balance. The product from the OCM reaction exhibited complicated effects on the DHA catalyst. • Conducted additional OCM catalyst characterization using Near Ambient Pressure X-ray Photoelectron Spectroscopy and in situ Raman characterization • Validated the significant energy savings for OAS as compared to the base case non-oxidative DHA. Successfully set up the simulation model for the OCM+DHA+SHC reaction system based on the updated experimental results from NCSU. Q13-End of project: • Synthesized new zeolite catalysts by the microwave method, conducted characterizations (XRD, SEM, and TEM) and catalytic behavior testing. • Explored the “wet” C 2 H 6 and C 2 H 4 DHA reactions with using steam co-feed. A subsequent reduction as the regeneration step can regenerate the DHA catalyst and recover 99% activity of the fresh performance. • Achieved a 15.3% single-pass aromatic yield from methane by rationally combining the OCM and DHA at different temperatures. • Conducted a 105-hour stability test with an improved regeneration procedure, with an average aromatic yield of 13.8%. • Developed new catalyst and achieved a record-high 23.2% yield.

03 NATURAL GAS↗
DOE OSTI2023

Dynamics in Star-forming Cores (DiSCo): project overview and the first look towards the B1 and NGC 1333 regions in Perseus

The internal velocity structure within dense gaseous cores plays a crucial role in providing the initial conditions for star formation in molecular clouds. However, the kinematic properties of dense gas at core scales (~0.01–0.1 pc) has not been extensively characterized because of instrument limitations until the unique capabilities of GBT-Argus became available. The ongoing GBT-Argus Large Program, Dynamics in Star-forming Cores (DiSCo) thus aims to investigate the origin and distribution of angular momentum of star-forming cores. DiSCo will survey all starless cores and Class 0 protostellar cores in the Perseus molecular complex down to ~0.01 pc scales with <0.05 km s –1 velocity resolution using the dense gas tracer N 2 H + . Here, we present the first data sets from DiSCo towards the B1 and NGC 1333 regions in Perseus. Our results suggest that a dense core’s internal velocity structure has little correlation with other core-scale properties, indicating these gas motions may be originated externally from cloud-scale turbulence. These first data sets also reaffirm the ability of GBT-Argus for studying dense core velocity structure and provided an empirical basis for future studies that address the angular momentum problem with a statistically broad sample.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

..delta..-Learning of High-Fidelity Electronic Structure Using Graph Neural Networks with Modified Node-Level Features

In this work, we present a ..delta..-learning approach for predicting the eigenvalues calculated with the hybrid functional HSE06 (..epsilon..nkHSE) for a set of metal and nitrogen doped graphene catalysts (MNCs) from Perdew-Burke-Ernzerhof (PBE) inputs. The model presented here incorporates electronic scalar features along with structural information in a graph neural network (GNN). In particular, the PBE eigenvalues for different bands and k-points and orbital-resolved projectors are combined with the applied potential as node-level features along with structural information within the Atomistic Line Graph Neural Network (ALIGNN) architecture. These features enable flexibility for systems with electrified interfaces, such as in electrocatalysts and achieves mean absolute error (MAE) of less than 0.1 eV. The machine learning model reported here achieves a strong generalization to left-out adsorbates (MAE = 0.074 eV) and leave-one-chemical-space-out (MAE = 0.08 eV) and completely left-out metals (MAE = 0.072 eV), confirming the robustness of the machine learning (ML) model in predicting ..epsilon..nkHSE.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Identification and preliminary characterization of conserved uncharacterized proteins from Chlamydomonas reinhardtii , Arabidopsis thaliana , and Setaria viridis

Abstract The rapid accumulation of sequenced plant genomes in the past decade has outpaced the still difficult problem of genome‐wide protein‐coding gene annotation. A substantial fraction of protein‐coding genes in all plant genomes are poorly annotated or unannotated and remain functionally uncharacterized. We identified unannotated proteins in three model organisms representing distinct branches of the green lineage (Viridiplantae): Arabidopsis thaliana (eudicot), Setaria viridis (monocot), and Chlamydomonas reinhardtii (Chlorophyte alga). Using similarity searching, we identified a subset of unannotated proteins that were conserved between these species and defined them as Deep Green proteins. Bioinformatic, genomic, and structural predictions were performed to begin classifying Deep Green genes and proteins. Compared to whole proteomes for each species, the Deep Green set was enriched for proteins with predicted chloroplast targeting signals predictive of photosynthetic or plastid functions, a result that was consistent with enrichment for daylight phase diurnal expression patterning. Structural predictions using AlphaFold and comparisons to known structures showed that a significant proportion of Deep Green proteins may possess novel folds. Though only available for three organisms, the Deep Green genes and proteins provide a starting resource of high‐value targets for further investigation of potentially new protein structures and functions conserved across the green lineage.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

A Full-Stack Exploration of Language-Based Parallelism in Fortran 2023

This poster explores native parallel features in Fortran 2023 through the lens of supporting applications with libraries, compilers, and parallel runtimes. The language revision informally named Fortran 2008 introduced parallelism in the form of Single Program Multiple Data (SPMD) execution with two broad feature sets: (1) loop-level parallelism via do concurrent and (2) a Partitioned Global Address Space (PGAS) comprised of distributed “coarray” data structures. Fortran’s native parallelism has demonstrated high performance [1] and reduced the burden of inserting what sometimes amounts to more directives than code. Several compilers support both feature sets, typically by translating do concurrent into serial do loops annotated by parallel directives and by translating SPMD/PGAS features into direct calls to a communication library. Our research focuses primarily on two questions: (1) can the compiler’s parallel runtime library be developed in the language being compiled (Fortran) and (2) can we define an interface to the runtime that liberates compilers from being hardwired to one runtime and vice versa. We are answering these questions by developing the Parallel Runtime Interface for Fortran (PRIF) [2] and the Co-Array Fortran Framework of Efficient Interfaces to Network Environments (Caffeine) [3]. Caffeine is initially targeting adoption by LLVM Flang, a new open-source Fortran compiler developed by a broad community in industry, academia, and government labs. We are also exploring the use of these features in Inference-Engine, a deep learning library designed to facilitate neural network training and inference for high-performance computing applications written in modern Fortran.

Rasmussen, Katherine↗
DOE OSTI2025

Seismic imaging of the Ecuadorian forearc and arc from joint ambient noise, local, and teleseismic tomography: catching the Nazca slab in the act of flattening

SUMMARY The Ecuadorian Andes are a complex region characterized by accreted oceanic terranes driven by the ongoing subduction of the oceanic Nazca plate beneath South America. Present-day tectonics in Ecuador are linked to the downgoing plate geometry featuring the subduction of the aseismic, oceanic Carnegie Ridge, which is currently entering the trench. Using seismic tomography, we jointly invert arrival times of P and S waves from local and teleseismic earthquakes with surface wave dispersion curves to image the structure of the forearc and magmatic arc of the Ecuadorian Andes. Our data set includes > 100 000 traveltimes recorded at 294 stations across Ecuador. Our images show the basement of the central forearc is composed of accreted oceanic terranes with high elastic wave speeds. Inboard of the Carnegie Ridge, the westernmost forearc and coastal cordilleras display relatively low Vp and Vs and high Vp/Vs values, which we attribute to the increased hydration and fracturing of the overriding plate due to the subduction of the thick oceanic crust of the Carnegie Ridge. We additionally image across-arc differences in magmatic architecture. The frontal volcanic arc overlies accreted terranes and is characterized by low velocities and high Vp/Vs indicative of partial melt reservoirs which are limited to the upper crust. In contrast, the main arc displays regions of partial melt across a wider range of depths. The Subandean zone of Ecuador has two active volcanoes built on continental crust suggesting the arc is expanding eastwards. The mid to lower crust does not show indications of being modified from the magmatic process. We infer that the slab is in the process of flattening as a consequence of early-stage subduction of the buoyant Carnegie Ridge.

58 GEOSCIENCES↗
DOE OSTI2021

New experimental approach to understanding the chemical reactivity of oxide surfaces

Metal oxides have been an attractive option for a range of applications, including hydrogen sensors, microelectronics, and catalysis, due to their reactivity and tunability. The properties of metal oxides can vary greatly on their precise surface structure; however, few surface science techniques can achieve atomistic-level determinations of surface structure, and fewer yet can do so for insulator surfaces. Low energy ion beam analysis offers a potential insulator-compatible solution to characterizing the surface structure of metal oxides. As a feasibility study, we apply low energy ion beam analysis to investigate the surface structure of a magnetite single crystal, Fe 3 O 4 (100). We obtain multi-angle maps using both forward-scattering low energy ion scattering (LEIS) and backscattering impact-collision ion scattering spectroscopy (ICISS). Both sets of experimental maps have intensity patterns that reflect the symmetries of the Fe 3 O 4 (100) surface structure. However, analytical interpretation of these intensity patterns to extract details of the surface structure is significantly more complex than previous LEIS and ICISS structural studies of one-component metal crystals, which had far more symmetries to exploit. To gain further insight into the surface structure, we model our experimental measurements with ion-trajectory tracing simulations using molecular dynamics. Our simulations provide a qualitative indication that our experimental measurements agree better with a subsurface cation vacancy model than a distorted bulk model.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiscale Data-Driven Seismic Full-Waveform Inversion With Field Data Study

Seismic full-waveform inversion (FWI), which uses iterative methods to estimate high-resolution subsurface models from seismograms, is a powerful imaging technique in exploration geophysics. In recent years, the computational cost of FWI has grown exponentially due to the increasing size and resolution of seismic data. Moreover, it is a nonconvex problem and can encounter local minima due to the limited accuracy of the initial velocity models or the absence of low frequencies in the measurements. To overcome these computational issues, we develop a multiscale data-driven FWI method based on fully convolutional networks (FCNs). In preparing the training data, we first develop a real-time style transform method to create a large set of synthetic subsurface velocity models from natural images. We then develop two convolutional neural networks with encoder-decoder structures to reconstruct the low- and high-frequency components of the subsurface velocity models, separately. To validate the performance of our data-driven inversion method and the effectiveness of the synthesized training set, we compare it with conventional physics-based waveform inversion approaches using both synthetic and field data. Finally, these numerical results demonstrate that, once our model is fully trained, it can significantly reduce the computation time and yield more accurate subsurface velocity models in comparison with conventional FWI.

58 GEOSCIENCES↗
DOE OSTI2023

Habitat severity characteristics structure soil communities at regional and local spatial scales along the Antarctica Peninsula

Antarctic soils provide an excellent setting to test biogeographical patterns across spatial and environmental scales given their relatively simple communities and the dominance of physical factors that create strong environmental gradients. Additional urgency is given by the fact that their unique terrestrial communities are the subject of conservation efforts in a rapidly changing environment. We investigated relationships of soil community assembly and alpha and beta diversity with climatic and environmental parameters across regional and local scales in Maritime Antarctica. We sampled from a regional gradient of sites that differ in habitat severity, ranging from relatively favourable to harsher physicochemical conditions. At the regional scale, bacterial community characteristics and microarthropod abundance varied along this severity gradient, but most measures of fungal communities did not. Microarthropod and microbial communities differed in which soil and climate parameters were most influential, and the specific parameters that influenced each taxon differed across broad and fine spatial scales. This suggests that conservation efforts will need to focus on a large variety of habitat characteristics to successfully encompass diversity across taxa. Because beta diversity was the result of species turnover, conservation efforts also cannot focus on only the most biodiverse sites to effectively preserve all aspects of biodiversity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Single-Point Extrapolation to the Complete Basis Set Limit through Deep Learning

Machine learning (ML) offers an attractive method for making predictions about molecular systems while circumventing the need to run expensive electronic structure calculations. Once trained on ab initio data, the promise of ML is to deliver accurate predictions of molecular properties that were previously computationally infeasible. In this work, we develop and train a graph neural network model to correct the basis set incompleteness error (BSIE) between a small and large basis set at the RHF and B3LYP levels of theory. Our results show that, when compared to fitting to the total potential, an ML model fitted to correct the BSIE is better at generalizing to systems not seen during training. We test this ability by training on single molecules while evaluating on molecular complexes. We also show that ensemble models yield better behaved potentials in situations where the training data is insufficient. However, even when only fitting to the BSIE, acceptable performance is only achieved when the training data sufficiently resemble the systems one wants to make predictions on. As a result, the test error of the final model trained to predict the difference between the cc-pVDZ and cc-pV5Z potential is 0.184 kcal/mol for the B3LYP density functional, and the ensemble model accurately reproduces the large basis set interaction energy curves on the S66x8 dataset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural and compositional complexities of hierarchical self-assembly: A hypergraph approach

Programmable self-assembly enables the construction of complex molecular, supramolecular, and crystalline architectures from well-designed building blocks. In this work, we introduce a hypergraph-based formalism, Blocks & Bonds (B&B), which generalizes classical chemical graph theory by incorporating directed and multicolored interactions, internal symmetries, and hierarchical organization. Within this framework, we develop the Structure Code (SC), a compact and versatile language for describing self-assembled architectures. We define a Kolmogorov-style structural complexity as the total information content of SC, obtained through its tokenization and Shannon information assignment. Complementing this encoding-based measure, we introduce a much simpler quantity, the compositional complexity, which depends only on the number and cumulative usage of block and bond types in the construction set. A central result of this work is a strong empirical correlation between the token-based structural complexity and the compositional complexity across all examined systems. Owing to this agreement, the compositional complexity emerges as the most practical and broadly applicable measure: it is easy to compute, requires no explicit encoding, and yet closely tracks the actual information content of structurally diverse architectures. Applications to molecular systems (ethylene glycol and glucose), DNA-origami lattices, and crystalline assemblies show that B&B hypergraphs provide a unified, scalable, and information-efficient representation of structural organization, naturally capturing symmetry, modularity, and stereochemistry. This framework establishes a quantitative foundation for complexity-aware classification and inverse design of programmable matter.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗
DOE OSTI2023

Navigating the Expansive Landscapes of Soft Materials: A User Guide for High-Throughput Workflows

Synthetic polymers are highly customizable with tailored structures and functionality, yet this versatility generates challenges in the design of advanced materials due to the size and complexity of the design space. Thus, exploration and optimization of polymer properties using combinatorial libraries has become increasingly common, which requires careful selection of synthetic strategies, characterization techniques, and rapid processing workflows to obtain fundamental principles from these large data sets. Herein, we provide guidelines for strategic design of macromolecule libraries and workflows to efficiently navigate these high-dimensional design spaces. We describe synthetic methods for multiple library sizes and structures as well as characterization methods to rapidly generate data sets, including tools that can be adapted from biological workflows. We further highlight relevant insights from statistics and machine learning to aid in data featurization, representation, and analysis. This Perspective acts as a “user guide” for researchers interested in leveraging high-throughput screening toward the design of multifunctional polymers and predictive modeling of structure–property relationships in soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Biolink Model: A universal schema for knowledge graphs in clinical, biomedical, and translational science

Abstract Within clinical, biomedical, and translational science, an increasing number of projects are adopting graphs for knowledge representation. Graph‐based data models elucidate the interconnectedness among core biomedical concepts, enable data structures to be easily updated, and support intuitive queries, visualizations, and inference algorithms. However, knowledge discovery across these “knowledge graphs” (KGs) has remained difficult. Data set heterogeneity and complexity; the proliferation of ad hoc data formats; poor compliance with guidelines on findability, accessibility, interoperability, and reusability; and, in particular, the lack of a universally accepted, open‐access model for standardization across biomedical KGs has left the task of reconciling data sources to downstream consumers. Biolink Model is an open‐source data model that can be used to formalize the relationships between data structures in translational science. It incorporates object‐oriented classification and graph‐oriented features. The core of the model is a set of hierarchical, interconnected classes (or categories) and relationships between them (or predicates) representing biomedical entities such as gene, disease, chemical, anatomic structure, and phenotype. The model provides class and edge attributes and associations that guide how entities should relate to one another. Here, we highlight the need for a standardized data model for KGs, describe Biolink Model, and compare it with other models. We demonstrate the utility of Biolink Model in various initiatives, including the Biomedical Data Translator Consortium and the Monarch Initiative, and show how it has supported easier integration and interoperability of biomedical KGs, bringing together knowledge from multiple sources and helping to realize the goals of translational science.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Modeling receptor flexibility in the structure-based design of KRAS G12C inhibitors

KRAS has long been referred to as an ‘undruggable’ target due to its high affinity for its cognate ligands (GDP and GTP) and its lack of readily exploited allosteric binding pockets. Recent progress in the development of covalent inhibitors of KRAS G12C has revealed that occupancy of an allosteric binding site located between the α3-helix and switch-II loop of KRAS G12C —sometimes referred to as the ‘switch-II pocket’—holds great potential in the design of direct inhibitors of KRAS G12C . In studying diverse switch-II pocket binders during the development of sotorasib (AMG 510), the first FDA-approved inhibitor of KRAS G12C , we found the dramatic conformational flexibility of the switch-II pocket posing significant challenges toward the structure-based design of inhibitors. Here, we present our computational approaches for dealing with receptor flexibility in the prediction of ligand binding pose and binding affinity. For binding pose prediction, we modified the covalent docking program CovDock to allow for protein conformational mobility. This new docking approach, termed as FlexCovDock, improves success rates from 55 to 89% for binding pose prediction on a dataset of 10 cross-docking cases and has been prospectively validated across diverse ligand chemotypes. For binding affinity prediction, we found standard free energy perturbation (FEP) methods could not adequately handle the significant conformational change of the switch-II loop. We developed a new computational strategy to accelerate conformational transitions through the use of targeted protein mutations. Using this methodology, the mean unsigned error (MUE) of binding affinity prediction were reduced from 1.44 to 0.89 kcal/mol on a set of 14 compounds. These approaches were of significant use in facilitating the structure-based design of KRAS G12C inhibitors and are anticipated to be of further use in the design of covalent (and noncovalent) inhibitors of other conformationally labile protein targets.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Group structure selection with random forests

Choosing an appropriate group structure for multigroup transport is far from an exact science. For some applications, one blindly uses a group structure developed years ago by forgotten methods. Furthermore, one sometimes uses the same group structure for a variety of problems, even if the group structure was originally developed with a certain application in mind. In this work, we create optimized group structures with simulated annealing for critical assembly test problems and apply a random forest regressor with bagging to choose the best group structure based on parameters of the different test problems. The optimized group structures were generated using a simulated annealing optimizer for several simple, spherical, and unreflected problems. The optimization was performed to minimize a cost function that included fission rate, absorption rate, leakage, and k{sub eff}. A random forest regressor was then trained on a set of International Criticality Safety Benchmark Evaluation Project inputs and used to select one of these six group structures. The trained machine learning model chose the best group structure 65% of the time, and one of the three best 89% of the time. Furthermore, it decreased the L2 error over all test problems by a factor of 25 when compared to the standard Los Alamos 70-group structure. In other words, the model chose group structure that were far more appropriate for the test problems than the traditional LANL group structure. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Multiscale electric-field imaging of polarization vortex structures in PbTiO 3 /SrTiO 3 superlattices

In ferroelectric heterostructures, the interaction between intrinsic polarization and the electric field generates a rich set of localized electrical properties. The local electric field is determined by several connected factors, including the charge distribution of individual unit cells, the interfacial electromechanical boundary conditions, and chemical composition of the interfaces. However, especially in ferroelectric perovskites, a complete description of the local electric field across micro-, nano-, and atomic-length scales is missing. Here, by applying four-dimensional scanning transmission electron microscopy (4D STEM) with multiple probe sizes matching the size of structural features, we directly image the electric field of polarization vortices in (PbTiO 3 ) 16 /(SrTiO 3 ) 16 superlattices and reveal different electric field configurations corresponding to the atomic scale electronic ordering and the nanoscale boundary conditions. The separability of two different fields probed by 4D STEM offers the possibility to reveal how each contributes to the electronic properties of the film.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mapping snow depth and volume at the alpine watershed scale from aerial imagery using Structure from Motion

Time series mapping of snow volume in the mountains at global scales and at resolutions needed for water resource management is an unsolved challenge to date. Snow depth mapping by differencing surface elevations from airborne lidar is a mature measurement approach filling the observation gap operationally in a few regions, primarily in mountain headwaters in the Western United States. The same concept for snow depth retrieval from stereo- or multi-view photogrammetry has been demonstrated, but these previous studies had limited ability to determine the uncertainties of photogrammetric snow depth at the basin scale. For example, assessments used non-coincident or discrete points for reference, masked out vegetation, or compared a subset of the fully snow-covered study domain. Here, using a unique data set with simultaneously collected airborne data, we compare snow depth mapped from multi-view Structure from Motion photogrammetry to that mapped by lidar at multiple resolutions over an entire mountain basin (300 km 2 ). After excluding reconstruction errors (negative depths), SfM had lower snow-covered area (~27%) and snow volume (~16%) compared to lidar. The reconstruction errors were primarily in areas with vegetation, shallow snow (< 1 m), and steep slopes (> 60°C). Across the overlapping snow extent, snow depths compared well to lidar with similar mean values (< 0.03 m difference) and snow volume (± 5%) for output resolutions of 3 m and 50 m, and with a normalized median absolute deviation of 0.19 m. Our results indicate that photogrammetry from aerial images can be applied in the mountains but would perform best for deeper snowpacks above tree line.

54 ENVIRONMENTAL SCIENCES↗