Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “species”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Impact of Iron Species Dispersion on Fe/ZSM–5 Catalyst Performance for Methane Dehydroaromatization (MDA)

Methane dehydroaromatization (MDA) is one of the most promising technologies for directly transforming methane into aromatics. Unlike the extensively investigated Mo/ZSM-5 catalysts, the structure and, consequently, the catalytic activity of Fe/ZSM-5 are markedly influenced by the method of preparation, as shown here. In this study, we prepared 2 % and 4 % Fe/ZSM-5 catalysts via wet impregnation (WI) and incipient wetness impregnation (IWI). Characterizations (XRD, STEM, UV-Vis, NH 3 -TPD and H 2 -TPR) reveal that 2 %Fe-WI mainly possesses isolated or low-polymerized Fe species within zeolite channels, leading to a rapid activation and a higher benzene yield due to the faster reduction to iron suboxides under MDA conditions. In contrast, 2 %Fe-IWI contains bulk iron oxide aggregates, resulting in a slower activation as these aggregates transform into iron carbide through successive reduction and carbonization. Here, a deactivation kinetic study applied to the 2 % catalysts further demonstrates the quantitative relation between Fe site isolation and catalytic activity. Although both 4 % catalysts inevitably form sizable iron oxide clusters and particles due to the high Fe/Al ratio, similar trends are noted, with the WI catalysts exhibiting a shorter induction/activation period and a higher yield of benzene, paralleling observations made with 2 % catalysts.

03 NATURAL GAS↗
DOE OSTI2020

Realization of an Asymmetric Non‐Aqueous Redox Flow Battery through Molecular Design to Minimize Active Species Crossover and Decomposition

Abstract This communication presents a mechanism‐based approach to identify organic electrolytes for non‐aqueous redox flow batteries (RFBs). Symmetrical flow cell cycling of a pyridinium anolyte and a cyclopropenium catholyte resulted in extensive capacity fade due to competing decomposition of the pyridinium species. Characterization of this decomposition pathway enabled the rational design of next‐generation anolyte/catholyte pairs with dramatically enhanced cycling performance. Three factors were identified as critical for slowing capacity fade: (1) separating the anolyte–catholyte in an asymmetric flow cell using an anion exchange membrane (AEM); (2) moving from monomeric to oligomeric electrolytes to limit crossover through the AEM; and (3) removing the basic carbonyl moiety from the anolyte to slow the protonation‐induced decomposition pathway. Ultimately, these modifications led to a novel anolyte–catholyte pair that can be cycled in an AEM‐separated asymmetric RFB for 96 h with >95 % capacity retention at an open circuit voltage of 1.57 V.

Shrestha, Anuska↗
DOE OSTI2025

Divergent Responses of Carbon Nitride Dot‐Based Amorphous Species and Small Molecule Hybrids to Trace Level Analytes

Bottom-up synthesis of carbon nitride dots (CNDs) offers a versatile platform for the creation of diverse nanomaterials with tunable properties. Here, we report a facile hydrothermal approach using citric acid (CA) and urea (U) as precursors to synthesize CNDs with varying degrees of condensation and crystallinity. By carefully controlling reaction conditions and post-synthetic treatments, we obtained two distinct fractions: a polycrystalline fraction composed of small-molecule hybrids and an amorphous fraction containing CNDs. We then sought to understand how the dominant species in these fractions impact sensing abilities using trace-level explosive exemplars. In conclusion, the results have important implications for sensing and related applications where understanding the complex interplay between synthetic conditions and post-synthetic processing play vital roles in determining the final properties of CND materials.

carbon nitride dots↗
DOE OSTI2024

Quantifying Kinetically Relevant Species on Zr‐SiO 2 Materials for MPV Reduction

Abstract On supported metal catalysts such as Zr‐SiO 2 , it can be challenging to isolate characteristics that result from intrinsic properties of the active site from those that result from the environment surrounding the active site. In this report, we utilize in situ titration of Lewis acid sites with phosphonic acid to accurately and quantitatively describe kinetically relevant Zr species on Zr‐SiO 2 materials for the MPV reduction of cyclohexanone. We find that rate of MPV reduction on Zr‐SiO 2 materials can be described as a combination of rate over titratable Zr, that is likely well dispersed Zr, and rate over non‐titratable Zr, that is likely supported ZrO x . The fraction of Zr that is well dispersed on the SiO 2 is dependent on the surface density at which Zr is grafted but not the choice of Zr precursor. We demonstrate that phosphonic acid titration can offer a more relevant, quantitative description of Zr dispersion than UV‐vis and can be used to quantitatively describe changes that occur to the material during regeneration.

Chase, Emily↗
DOE OSTI2022

Effects of Lead and Arsenic in Soils from Former Orchards on Growth of Three Plant Species

Abstract Historical use of lead arsenate as a pesticide in former orchards of eastern Washington State (USA) has resulted in legacy lead (Pb) and arsenic (As) soil contamination. However, the impacts on plant growth in soils with residual Pb and As contamination have not yet been quantified. To this end, a comparative study of plant growth impacts was performed for native bluegrass ( Poa secunda ), invasive cheatgrass ( Bromus tectorum ), and buttercrunch lettuce ( Lactuca sativa ). Using standard plant growth protocols, germination frequency and biomass growth were measured over a wide range of Pb and arsenate concentrations, with maximum concentrations of 3400 and 790 mg kg −1 for Pb and As, respectively. Results indicated that only the biomass growth for all species decreased in soils with the highest concentrations of Pb and As in the soil, with no impacts on soils with lower residual Pb and arsenate concentrations. No impact on percentage of germination was observed at any soil concentration. These results can be used to determine site‐specific soil screening levels for use in ecological risk assessments for Pb and arsenate in soils. Environ Toxicol Chem 2022;41:1459–1465. © 2022 Battelle Memorial Institute. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Metabolomics of related C3 and C4 Flaveria species indicate differences in the operation of photorespiration under fluctuating light

C 3 photosynthesis can be complemented with a C 4 carbon concentrating mechanism (CCM) to minimize photorespiratory losses. C 4 photosynthesis is often more efficient than C 3 under steady-state conditions. However, the C 4 CCM depends on inter-cellular metabolite concentration gradients, which must increase following increases in light intensity and could decrease rates of C 4 photosynthesis under fluctuating light. Additionally, incomplete flux through photorespiration could prove beneficial to C 4 assimilation during light induction of the CCM. Here, we compare metabolic profiles in the closely related C 3 Flaveria robusta and C 4 Flaveria bidentis during a light transient from low to high light to determine if these non-steady state accumulation patterns provide insight to the induction of the metabolite gradients needed to drive C 4 intermediate transport and if there is incomplete cycling of photorespiratory intermediates. In these C 3 and C 4 species, metabolite steady-state pool sizes suggest that C 4 transport acids maintain concentration gradients across the bundle sheath and mesophyll cell types under these light fluctuations. However, there was incomplete flux through photorespiration in the C 4 F. bidentis, which could reduce photorespiratory CO 2 loss via glycine decarboxylation and help maintain higher rates of assimilation during following induction periods.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Hierarchical Conditioning of Diffusion Models Using Tree-of-Life for Studying Species Evolution

A central problem in biology is to understand how organisms evolve and adapt to their environment by acquiring variations in the observable characteristics or traits of species across the tree of life. With the growing availability of large-scale image repositories in biology and recent advances in generative modeling, there is an opportunity to accelerate the discovery of evolutionary traits automatically from images. Toward this goal, we introduce Phylo-Diffusion, a novel framework for conditioning diffusion models with phylogenetic knowledge represented in the form of HIERarchical Embeddings (HIER-Embeds). We also propose two new experiments for perturbing the embedding space of Phylo-Diffusion: trait masking and trait swapping, inspired by counterpart experiments of gene knockout and gene editing/swapping. Our work represents a novel methodological advance in generative modeling to structure the embedding space of diffusion models using tree-based knowledge. Our work also opens a new chapter of research in evolutionary biology by using generative models to visualize evolutionary changes directly from images. We empirically demonstrate the usefulness of Phylo-Diffusion in capturing meaningful trait variations for fishes and birds, revealing novel insights about the biological mechanisms of their evolution. (Model and code can be found at imageomics.github.io/phylo-diffusion)

Khurana, Mridul↗
DOE OSTI2022

Total Mercury Analysis of Radioactive Waste Containing Multiple Mercury Species

In this work, a direct mercury analyzer (DMA) was used to analyze total mercury in radioactive waste samples containing methylmercury and other forms of mercury including Hg o (elemental) together with inorganic ionic mercury species and complexes. These samples were also analyzed using Cold Vapor Atomic Absorption Spectroscopy (CVAAS) and/or Inductively Coupled Plasma Mass Spectroscopy (ICMS). Comparative statistical evaluation of the results from spike solutions/simulants, liquid radioactive waste samples, and interlaboratory performance test samples demonstrated that the various methods generated accurate and/or equivalent total mercury data and equivalent precision (2σ ± < 20%). Triplicate total mercury analysis of an exemplar radioactive waste resulted in an average value of 54.1 mg/L (as Hg) using CVAAS, 55.1 mg/L using ICPMS and 56.0 mg/L using DMA. A primary advantage of the DMA in a radioactive environment is avoiding multi-step, labor-intensive, time-consuming and waste-producing sample preparation protocols needed for CVAAS and ICPMS. DMA was determined to be the preferred method for measuring total mercury in the Savannah River National Laboratory (SRNL) radioanalytical laboratory based on analytical performance combined with ease of use in a radiological containment unit.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO 2 Treated AZ91D Magnesium Alloy with Lithium Nitrate

A unique corrosion barrier layer, formed by thermal CO 2 treatment with LiNO 3 on AZ91D, was characterized to reveal the chemical species and their spatial distribution using the combination of scanning transmission electron microscopy (STEM), energy dispersive spectroscopy (EDS), and electron energy loss spectroscopy (EELS) techniques. Two distinct and spatially segregated phases were identified as Li compound(s) with MgCO 3 and MgO in the surface barrier layer. Finally, based on the characterization results, it is presumed that the reaction of Mg oxide/hydroxide with LiNO 3 and CO 2 occurred preferentially in some local areas where Li compound(s) with MgCO 3 were present, but the unreacted areas contained MgO in the surface barrier layer.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assessing the availability of two bamboo species for fermentable sugars by alkaline hydrogen peroxide pretreatment

We report this study comprehensively investigated two bamboo species (i.e. Neosinocalamus affinis and Phyllostachys edulis) in terms of their cell wall ultrastructure, chemical compositions, enzymatic saccharification, and lignin structure before and after alkaline hydrogen peroxide pretreatment (AHP). During AHP, Neosinocalamus affinis (NAB) had higher delignification than Phyllostachys edulis (PEB), and thus showed better enzymatic digestibility (93.05% vs 53.57% for glucan). The fundamental chemical behavior of the bamboo lignins was analyzed by fluorescence microscope (FM), confocal Raman microscope (CRM), molecular weight analysis, and 2D HSQC-NMR. Results indicated that the PEB has thicker cell wall and more concentrated lignin in its compound middle lamella and cell corner middle lamella than NAB. Moreover, PEB lignin contains more G units (S/G of 0.95), in evident contrast to that of NAB lignin (S/G of 1.30), which favor the formation of C–C linkages, thus impeding its degradation during the AHP.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

The genomic footprints of wild Saccharum species trace domestication, diversification, and modern breeding of sugarcane

Sugarcane is a major crop of unclear origins due to its complex polyploid interspecific genome. We analyzed genome ancestries using whole-genome sequence data from 390 representative accessions based on repeated k-mers and chloroplast phylogeny. The results provided evidence that Saccharum officinarum was domesticated in the New Guinea region from the S. robustum wild species and revealed that its genome is a mosaic involving different S. robustum subgroups. We discovered a wild Saccharum contributor to most modern cultivars, likely originating from East Melanesia. We highlighted two early centers of sugarcane diversification associated with human transport, one in continental Asia through hybridization with different S. spontaneum subgroups and one in the Melanesian and Polynesian islands via hybridization with the discovered ancestor and Miscanthus. Finally, we revealed the genome ancestry of modern cultivars, highlighting untapped wild Saccharum diversity as a source of alleles for breeding programs.

Garsmeur, Olivier [CIRAD, Montpellier (France). Ag↗
DOE OSTI2021

Modeling of aqueous species interaction energies prior to nucleation in cement-based gel systems

Arguably the most ubiquitous construction material in modern civilization, concrete is enabling the development of megacities around the globe together with increasing living standards in developing nations. However, the exact formation mechanisms of the strength-giving calcium-rich gels remain a topic of debate. Using density functional modeling, we simulate the fundamental solution-based building blocks of cement hydrates (calcium ions and silicate and aluminate monomers) and their propensity to form pair-wise complexes with bonding environments characteristic of those found in calcium-silicate-hydrate, calcium-alumino-silicate-hydrate and sodium-containing calcium-alumino-silicate-hydrate gels, as assessed from Gibbs free energies of chemical reactions. By accurately simulating the high pH pore solution chemistry in Portland cements and related systems, along with discrete solvation of the species, we hypothesize potential early age formation routes of the gels and discuss limitations and future work associated with this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stannous chloride as a tool for mercury stripping in contaminated streams: Experimental assessment of toxicity in an invertebrate model species

In this work, the chronic toxicity of an innovative Hg water treatment system using tin (Sn) (II) chloride (SnCl 2 ) followed by air stripping was assessed through measurements of survival, growth, and reproduction rate in the freshwater cladoceran Ceriodaphnia dubia, a model species for toxicity testing. We first calculated the concentrations of Hg causing 25% reduction in survival and reproduction (Lethal or Inhibition Concentrations, or LC 25 and IC 25 , for survival and reproduction, respectively) through exposure to aqueous Hg at concentrations ranging from 0 to 25,000 ng L -1 . Then, we treated media (DMW and natural stream water) contaminated with Hg at LC 25 and IC 25 concentrations with SnCl 2 at a Sn:Hg stoichiometric ratio of 8:1 and air stripping and exposed C. dubia to this Sn-amended media. Our results showed that Hg significantly affected survival, reproduction rates and impaired growth. SnCl 2 -treatment removed 100% of the Hg from the media at all concentrations tested with no deleterious effects on survival, growth and reproduction. Our results confirmed the efficacy of SnCl 2 in removing aqueous Hg from stream water and showed that the added Sn did not impact C. dubia at the concentrations tested, supporting the suitability of SnCl 2 -based treatments in appropriate Hg-contaminated environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Multi-species collisions for delta-f gyrokinetic simulations: Implementation and verification with GENE

we report a multi-species linearized collision operator based on the model developed by Sugama et al. has been implemented in the nonlinear gyrokinetic code, GENE. Such a model conserves particles, momentum, and energy to machine precision, and is shown to have negative definite free energy dissipation characteristics, satisfying Boltzmann’s H-theorem, including for realistic mass ratio. Finite Larmor Radius (FLR) effects have also been implemented into the local version of the code. For the global version of the code, the collision operator has been developed to allow for block-structured velocity space grids, allowing for computationally tractable collisional global simulations. The validity of the collision operator has been demonstrated by relaxation and conservation tests, as well as appropriate benchmarks. The newly implemented operator shall be used in future simulations to study magnetically confined fusion plasma turbulence and transport in more extreme regions with higher collisionality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Implementation and verification of a model linearized multi-species collision operator in the COGENT code

We implement the multi-species linearized model collision operator, based on the approach proposed by Kolesnikov, in the full-f continuum gyrokinetic code COGENT. We describe the operator and use it in several COGENT simulations of highly collisional plasmas. We analyze simulation results with the Braginskii fluid model to illustrate that COGENT recovers both friction and thermal forces. Finally, we simulate the neoclassical transport of heavy impurities with COGENT and illustrate agreement with previously published theoretical results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Effect of Si/Al ratio of ZSM-5 support on structure and activity of Mo species in methane dehydroaromatization

The effect of the Si/Al ratio of the ZSM-5 support on the structure and activity of Mo/HZSM-5 catalysts in methane dehydroaromatization (MDA) was studied. ZSM-5 (with Si/Al = 15, 25, and 40) supported Mo oxide catalysts (MoOx/ZSM-5) with 3 and 10 wt% Mo loading were prepared by incipient wetness impregnation followed by calcination in air at 500 °C. The as-prepared catalysts were activated by temperature programmed reduction in hydrogen in order to maximize Mo dispersion. To understand the structure-activity relationship, the fresh and spent samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2 adsorption isotherms, Scanning Transmission Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (STEM-EDS), X-ray absorption spectroscopy (EXAFS and XANES), thermogravimetric analysis (TGA), and Raman spectroscopy. The results show that the Si/Al ratio does not influence the the local structure around the Mo centers. It does however affect the number of available Brønsted acid sites in the support and the amount of Mo species entering the zeolite channels. A lower Si/Al ratio and higher Mo loading resulted in a higher Mo occupation within the zeolite channels. The higher channel occupation directly correlated with higher benzene selectivity and yield, as well as a lower catalyst deactivation rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Numerical schemes for a multi-species BGK model with velocity-dependent collision frequency

Here, we consider a kinetic description of multi-species gas mixture modeled with Bhatnagar-Gross-Krook (BGK) collision operators, in which the collision frequency varies not only in time and space but also with the microscopic velocity. In this model, the Maxwellians typically used in standard BGK operators are replaced by a generalization of such target functions, which are defined by a variational procedure. In this paper we present a numerical method for simulating this model, which uses an Implicit-Explicit (IMEX) scheme to minimize a certain potential function, mimicking the Lagrange functional that appears in the theoretical derivation. We show that theoretical properties such as conservation of mass, total momentum and total energy as well as positivity of the distribution functions are preserved by the numerical method, and illustrate its usefulness and effectiveness with numerical examples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Bisphenol A degradation by manganese oxides at circumneutral pH: Quantitative evaluation of dissolved Mn(III) species with pyrophosphate

Although trivalent manganese (Mn(III)) species have been recognized as crucial intermediates in the degradation of organic contaminants by Mn oxides, quantitative research on their specific roles remains scarce. Here, our study investigated the degradation processes of an organic pollutant, Bisphenol A (BPA), by dissolved Mn(III) and Mn(III)-bearing oxides, and elucidated the differences of the underlying mechanisms and reaction pathways between several Mn oxides and dissolved Mn(III). Our results indicated that BPA degradation rates with Mn(III)-bearing oxides alone follow the order: δ-MnO 2 >> γ-MnOOH > Mn 3 O 4 . Adding pyrophosphate (PP) significantly enhanced BPA degradation by promoting the formation of Mn(III)-PP complexes and exposing more reactive sites, achieved through destabilizing the crystal structure and mitigating of Mn(II) readsorption, particularly in γ-MnOOH and Mn 3 O 4 . Our kinetic model revealed that heterogeneous degradation by Mn oxides is the predominant reaction pathway, accounting for 61.4 %, 87.8 %, and 73.8 % of the total degraded BPA for δ-MnO 2 , γ-MnOOH, and Mn 3 O 4 , respectively, even in the presence of significant amount of dissolved Mn(III) intermediates due to high PP concentrations. These results offer mechanistic details on BPA degradation by Mn oxides and the influence of ligand concentration, providing helpful insights for optimizing degradation strategies of organic pollutants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗