Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

The effect of preignition on cylinder temperatures, pressures, power output, and piston failures

An investigation was conducted using a cylinder of a V-type liquid-cooled engine to observe the behavior of the cylinder when operated under preignition conditions. Data were recorded that showed cylinder-head temperatures, time of ignition, engine speed, power output, and change in maximum cylinder pressure as a function of time as the engine entered preignition and was allowed to operate under preignition conditions for a short time. The effects of the following variables on the engine behavior during preignition were investigated: fuel-air ratio, power level, aromatic content of fuel, engine speed, mixture temperature, and preignition source. The power levels at which preignition would cause complete piston failure for the selected engine operating conditions and the types of failure encountered when using various values of clearance between the piston and cylinder barrel were determined. The fuels used had performance numbers high enough to preclude any possibility of knock throughout the test program.

Corrington, Lester C↗

Experimental observations of scale effects on bonded and bolted joints in composite structures

The objective is to observe size (scale) effects in (1) fiber dominated laminates and bolted joints, (2) adhesive (matrix) dominated bonded joints with fiber dominated laminate adherends, and (3) matrix dominated laminates. Selected literature on scale effects is reviewed with comments and test data from one source that is analyzed for predicted and actual scale effects utilizing uniaxial loaded static strength, spectrum fatigue residual strength, and spectrum fatigue lifetime test results. Causes of scale effects are discussed, the results are summarized, and conclusions are made.

Grimes, Glenn C.↗

Infrared dust features of late-type stars and planetary nebulae

The author presents 16-65 micron spectra of late-type stars and proto-planetary nebulae (PPN) obtained with the Goddard 24-channel spectrophotometer from the Kuiper Airborne Observatory (KAO). The spectra of these objects contain most of the 9-13 known dust features, all discovered from the KAO, at wavelengths greater than 22 microns. The 8-100 micron spectra of a few representative objects are modeled with simple grains selected from a wide range of candidate solids. Hot sapphire is the most likely source of the 13 micron feature found in some M and MS star. Likely candidates for other features include ice, sulfides, and crystalline silicates. Also presented is a review of grain candidate materials for which optical properties in the far infrared have been measured, and a list of those for which measurements are needed.

Glaccum, W.↗

Long-Term Hard X-Ray Monitoring of X-Ray Bursters

The scientific goal of this project was to monitor a selected sample of x-ray bursters using data from the Burst and Transient Source Experiment (BATSE) on the Compton Gamma-Ray Observatory to characterize the hard x-ray emission of these objects over long time intervals. The project was closely related to "Monitoring x-ray emission from x-ray bursters", NASA project, and "Hard x-ray emission of x-ray bursters", NASA project, and shares publications in common with both of these. These efforts have lead to results directly from the BATSE data and also from Target of Opportunity Observations (TOO) made with the Rossi X-Ray Timing Explorer based on detection of transient hard x-ray outbursts with BATSE. The following papers have used BATSE data or data obtained with BATSE TOO triggers.

Halpern, Jules P.↗

The Lunar Lander "HabiTank" Concept

This paper will summarize the study that was conducted under the auspices of the National Aeronautics and Space Administration (NASA), lead by Johnson Space Center s Engineering Directorate in support of the Lunar Lander Preparatory Study (LLPS) as sponsored by the Constellation Program Office (CxPO), Advanced Projects Office (APO). The lunar lander conceptual design and analysis is intended to provide an understanding of requirements for human space exploration of the Moon using the Advanced Projects Office Pre-Lander Project Office selected "HabiTank" Lander concept. In addition, these analyses help identify system "drivers," or significant sources of cost, performance, risk, and schedule variation along with areas needing technology development. Recommendations, results, and conclusions in this paper do not reflect NASA policy or programmatic decisions. This paper is an executive summary of this study.

Kennedy, Kriss J.↗

Mars Global Reference Atmospheric Model (Mars-GRAM 2005) Applications for Mars Science Laboratory Mission Site Selection Processes

The new Mars-GRAM auxiliary profile capability, using data from TES observations, mesoscale model output, or other sources, allows a potentially higher fidelity representation of the atmosphere, and a more accurate way of estimating inherent uncertainty in atmospheric density and winds. Figure 3 indicates that, with nominal value rpscale=1, Mars-GRAM perturbations would tend to overestimate observed or mesoscale-modeled variability. To better represent TES and mesoscale model density perturbations, rpscale values as low as about 0.4 could be used. Some trajectory model implementations of Mars-GRAM allow the user to dynamically change rpscale and rwscale values with altitude. Figure 4 shows that an mscale value of about 1.2 would better replicate wind standard deviations from MRAMS or MMM5 simulations at the Gale, Terby, or Melas sites. By adjusting the rpscale and rwscale values in Mars-GRAM based on figures such as Figure 3 and 4, we can provide more accurate end-to-end simulations for EDL at the candidate MSL landing sites.

Justh, H. L.↗

A SNAPshot of the FUV (1320 - 1460 A) Spectrum of Lambda Vel (K4Ib-II)

The FUV spectrum (l330-1460A) of the K4Ib-II supergiant Lambda Vel was observed with the Cosmic Origins Spectrograph (COS) on HST, as part of the Ayres and Redfield Cycle 17 SNAP program "SNAPing Coronal Iron". This spectrum covers a region not previously seen in Lambda Vel at high resolution and reveals a rich emission-line spectrum superposed on a bright continuum, with contributions from a variety of atomic and molecular sources. Evidence of the stellar wind is seen in the P Cygni profiles of selected lines and the results of fluorescence processes are visible throughout the region. The spectrum has remarkable similarities to that of Alpha Boo (K1.5 III), but significant differences as well, including substantial FUV continuum emission, reminiscent of the M2 lab supergiant Alpha Ori, but minus the CO fundamental absorption bands seen in the latter star. However, fluoresced CO emission is present and strong, as in the K-giant stars Alpha Boo and Alpha Tau (K5 III). We present the details of this spectrum, in comparison to stars of similar temperature or luminosity and discuss the implications for the structure of and the radiative processes active in, the outer atmospheres of these stars.

Carpenter, Kenneth G.↗

Five-Channel Infrared Laser Absorption Spectrometer for Combustion Product Monitoring Aboard Manned Spacecraft

Continuous combustion product monitoring aboard manned spacecraft can prevent chronic exposure to hazardous compounds and also provides early detection of combustion events. As future missions extend beyond low-Earth orbit, analysis of returned environmental samples becomes impractical and safety monitoring should be performed in situ. Here, we describe initial designs of a five-channel tunable laser absorption spectrometer to continuously monitor combustion products with the goal of minimal maintenance and calibration over long-duration missions. The instrument incorporates dedicated laser channels to simultaneously target strong mid-infrared absorption lines of CO, HCl, HCN, HF, and CO2. The availability of low-power-consumption semiconductor lasers operating in the 2 to 5 micron wavelength range affords the flexibility to select absorption lines for each gas with maximum interaction strength and minimal interference from other gases, which enables the design of a compact and mechanically robust spectrometer with low-level sensitivity. In this paper, we focus primarily on absorption line selection based on the availability of low-power single-mode semiconductor laser sources designed specifically for the target wavelength range.

Briggs, Ryan M.↗

Single isotope fractionation of (16)O(-) implications for early history of solar system

Chemical fractionation processes are investigated with emphasis on selective single isotope fractionation in polyisotopic systems, particularly in oxygen. The related temperature parameters of meteoritic condensates and of their source medium are investigated by a thermometric method that is independent of assumptions regarding temperatures and pressures in the solar nebula. The crucial nonlinear chemical fractionation of O-16 was demonstrated experimentally. The effect was achieved in condensed CO2 formed from CO with C-12 O-16 selectively excited by H Ly alpha. The effect was verified by mass spectrometric measurements. The meteorite paleotemperature estimates were advanced from defining only thermal exposure to evaluating time and temperature independently. Grain temperatures at condensation of refractory inclusion materials are indicated to be less than 900 K in agreement with radiation temperature considerations and observations in circumstellar dust shells.

Arrhenius, G.↗

Improving the Near-Earth Micrometeoroid and Orbital Debris Environment Definition with LADC

The Large Area Debris Collector (LADC) is a 10 m(sup 2) aerogel and acoustic sensor system designed to characterize and collect submillimeter micrometeoroids and orbital debris on the International Space Station (ISS). The project is led by the U.S. Naval Research Laboratory (NRL) with major collaboration by the NASA Orbital Debris Program Office at Johnson Space Center. The U.S. Department of Defense Space Test Program (STP) is responsible for the integration, deployment, and retrieval of the system. The deployment is scheduled for August 2007 with an orbital collection period of one to two years. The combined area time product of LADC will provide a much needed orbital debris population update in the size regime that is important to the safety community - 100 mm and larger. Another key element for LADC is the source identification of the collected samples. Impact features such as track length and track volume can be used to estimate the impact speed and direction of any selected residual embedded in aerogel. Acoustic sensors can provide impact timing and impact location information. The combined dynamical signatures make it possible to reconstruct the orbits of some of the collected samples and lead to their source identification. Compositional analysis on the residuals can also separate debris from meteoroids and provide additional population breakdown for orbital debris (e.g., Al, paint, steel, Al2O3). To maximize the science return and minimize potential contamination from other ISS modules, a careful selection of the location and orientation of LADC on the ISS is needed. Key issues and engineering constraints encountered during mission preparation, and the expected science return based on the mission configuration, are summarized in this paper.

Liou, J.-C.↗

Spectroscopy of six X-ray-selected BL Lacertae candidates

Results of a continuing program aimed at extending the small list of X-ray-selected BL Lac objects are reported. High-quality spectra have been obtained of six faint blue objects that lie within the positional error boxes of X-ray sources discovered serendipitously by the Einstein Observatory. Three of the objects are found to be previously uncataloged low-red-shift quasi-stellar objects, including one formerly suggested as BL Lac candidate. Two are faint galactic stars, while the final object has a featureless spectrum, and thus remains a candidate. Although X-ray selection may ultimately be an effective means of discovering faint BL Lac objects, such sources are evidently rare at the X-ray flux levels attainable by the Einstein Observatory.

Margon, Bruce↗

Power System Optimization Codes Modified

A major modification of and addition to existing Closed Brayton Cycle (CBC) space power system optimization codes was completed. These modifications relate to the global minimum mass search driver programs containing three nested iteration loops comprising iterations on cycle temperature ratio, and three separate pressure ratio iteration loops--one loop for maximizing thermodynamic efficiency, one for minimizing radiator area, and a final loop for minimizing overall power system mass. Using the method of steepest ascent, the code sweeps through the pressure ratio space repeatedly, each time with smaller iteration step sizes, so that the three optimum pressure ratios can be obtained to any desired accuracy for each of the objective functions referred to above (i.e., maximum thermodynamic efficiency, minimum radiator area, and minimum system mass). Two separate options for the power system heat source are available: 1. A nuclear fission reactor can be used. It is provided with a radiation shield 1. (composed of a lithium hydride (LiH) neutron shield and tungsten (W) gamma shield). Suboptions can be used to select the type of reactor (i.e., fast spectrum liquid metal cooled or epithermal high-temperature gas reactor (HTGR)). 2. A solar heat source can be used. This option includes a parabolic concentrator and heat receiver for raising the temperature of the recirculating working fluid. A useful feature of the code modifications is that key cycle parameters are displayed, including the overall system specific mass in kilograms per kilowatt and the system specific power in watts per kilogram, as the results for each temperature ratio are computed. As the minimum mass temperature ratio is encountered, a message is printed out. Several levels of detailed information on cycle state points, subsystem mass results, and radiator temperature profiles are stored for this temperature ratio condition and can be displayed or printed by users.

Juhasz, Albert J.↗

Water Quality Contamination Sources and Controls for the Exploration Extra-vehicular Mobility Unit (xEMU)

NASA has been developing a new spacesuit, called the Exploration Extravehicular Mobility Unit (xEMU) for over a decade. This spacesuit is underdevelopment to support missions to the International Space Station (ISS) and also to the Moon. The xEMU uses controlled evaporative cooling through a membrane to reject waste heat from the crewmember, avionics, and environmental in-leak during autonomous operation. Given the unique mass and volume constraints imposed by the spacesuit application and the opportunities presented by the selection of a given membrane, the xEMU does not possess a separate feedwater loop to feed the evaporation process, rather the feedwater for the evaporation process is fed directly from the transport loop which collects heat from the sources within the suit. This has many benefits including mass/volume reductions from a lower component count within the system but does pose some additional potential constraints on water quality within the system in order to provide a working fluid that can be pumped, filtered, and used in contact with the remainder of the system while both avoiding fouling of the membrane as well as other deleterious effects such as creating conditions for corrosion of wetted surfaces within the transport loop. The discussion will seek to address the main sources of contamination and the applied controls. Sources considered will include: self-generated via materials selection and processes applied, influent working fluid, contamination of the influent working fluid via Ground Support Equipment (GSE) or processing equipment, microbial activity, and environmental influences such as elevated ambient CO2.

Colin Campbell↗

Equivalent Source Method Applied to Launch Acoustic Simulations

Aeroacoustic simulations of the launch environment are described. A hybrid computational fluid dynamics (CFD)/computational aeroacoustic (CAA) approach is developed in order to accurately and efficiently predict the sound pressure level spectrum on the launch vehicle and surrounding structures. The high-fidelity CFD code LAVA (Launch Ascent and Vehicle Analysis), is used to generate pressure time history at select locations in the flow field. A 3D exterior Helmholtz solver is then used to iteratively determine a set of monopole sources which mimic the noise generating mechanisms identified by the CFD solver. The acoustic pressure field generated from the Helmholtz solver is then used to evaluate the sound pressure levels.

Housman, Jeffrey A.↗

Techniques for optimal crop selection in a controlled ecological life support system

A Controlled Ecological Life Support System (CELSS) utilizes a plant's natural ability to regenerate air and water while being grown as a food source in a closed life support system. Current plant research is directed toward obtaining quantitative empirical data on the regenerative ability of each species of plant and the system volume and power requirements. Two techniques were adapted to optimize crop species selection while at the same time minimizing the system volume and power requirements. Each allows the level of life support supplied by the plants to be selected, as well as other system parameters. The first technique uses decision analysis in the form of a spreadsheet. The second method, which is used as a comparison with and validation of the first, utilizes standard design optimization techniques. Simple models of plant processes are used in the development of these methods.

Mccormack, Ann↗

Techniques for optimal crop selection in a controlled ecological life support system

A Controlled Ecological Life Support System (CELSS) utilizes a plant's natural ability to regenerate air and water while being grown as a food source in a closed life support system. Current plant research is directed toward obtaining quantitative empirical data on the regenerative ability of each species of plant and the system volume and power requirements. Two techniques were adapted to optimize crop species selection while at the same time minimizing the system volume and power requirements. Each allows the level of life support supplied by the plants to be selected, as well as other system parameters. The first technique uses decision analysis in the form of a spreadsheet. The second method, which is used as a comparison with and validation of the first, utilizes standard design optimization techniques. Simple models of plant processes are used in the development of these methods.

Mccormack, Ann↗

Radio morphology and parent population of X-ray selected BL Lacertae objects

High-dynamic range (typically 1700:1) radio maps of 15 X-ray BL Lac (XBL) objects from the HEAO-1 Large Area Sky Survey are presented. Morphological characteristics of these sources are compared with Fanaroff-Riley (FR) class I radio galaxies in the context of unified schemes, with reference to one-sided kiloparsec-scale emission. Evidence that cluster membership of XBLs is significantly higher than previously thought is also presented. It is shown that the extended radio powers, X-ray emission, core-to-lobe ratios, and linear sizes of the radio selected BL Lac (RBL) and XBL populations are consistent with an FR I radio galaxy parent population. A source list and VLA observing log and map parameters are provided.

Laurent-Muehleisen, S. A.↗

Printing Outside the Box: Additive Manufacturing Processes for Fabrication of Large Aerospace Structures

To achieve NASA's mission of space exploration, innovative manufacturing processes are being applied to the fabrication of propulsion elements. Liquid rocket engines (LREs) are comprised of a thrust chamber and nozzle extension as illustrated in figure 1 for the J2X upper stage engine. Development of the J2X engine, designed for the Ares I launch vehicle, is currently being incorporated on the Space Launch System. A nozzle extension is attached to the combustion chamber to obtain the expansion ratio needed to increase specific impulse. If the nozzle extension could be printed as one piece using free-form additive manufacturing (AM) processes, rather than the current method of forming welded parts, a considerable time savings could be realized. Not only would this provide a more homogenous microstructure than a welded structure, but could also greatly shorten the overall fabrication time. The main objective of this study is to fabricate test specimens using a pulsed arc source and solid wire as shown in figure 2. The mechanical properties of these specimens will be compared with those fabricated using the powder bed, selective laser melting technology at NASA Marshall Space Flight Center. As printed components become larger, maintaining a constant temperature during the build process becomes critical. This predictive capability will require modeling of the moving heat source as illustrated in figure 3. Predictive understanding of the heat profile will allow a constant temperature to be maintained as a function of height from substrate while printing complex shapes. In addition, to avoid slumping, this will also allow better control of the microstructural development and hence the properties. Figure 4 shows a preliminary comparison of the mechanical properties obtained.

Babai, Majid↗