Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Ionospheric and satellite remote sensing of tornadic storms

Gravity waves associated with tornadoes were studied by using a ground-based ionospheric sounding system and satellite visible and infrared photographs of clouds associated with storms. Examples were chosen from gravity waves associated with a group of tornadoes and with isolated tornadic storms. Ray tracing computation was carried out to identify the location of the wave source. It is found that the wave sources of gravity waves associated with tornadoes were located on the squall line and/or isolated clouds where the tornado touched down one hour after the gravity waves were excited.

Hung, R. J.↗

An experimental investigation of sound radiation from a duct with a circumferentially varying liner

The radiation of sound from an asymmetrically lined duct is experimentally studied for various hard-walled standing mode sources. Measurements were made of the directivity of the radiated field and amplitude reflection coefficients in the hard-walled source section. These measurements are compared with baseline hardwall and uniformly lined duct data. The dependence of these characteristics on mode number and angular location of the source is investigated. A comparison between previous theoretical calculations and the experimentally measured results is made and in general good agreement is obtained. For the several cases presented an asymmetry in the liner impedance distribution was found to produce related asymmetries in the radiated acoustic field.

Fuller, C. R.↗

Numerical simulations of high-speed solar wind streams within 1 AU and their signatures at 1 AU

A parametric study of the evolution within, and signatures at, 1 AU of high-speed streams is performed with the use of a MHD two-and-a-half-dimensional time-dependent model. This study is an extension of an earlier one by Smith and Dryer (1990) who examined the ecliptic plane consequences of relatively short-duration, energetic solar disturbances. The present study examines both the erupting and corotating parts of long-duration, high-speed streams characteristic of coronal hole flows. By examining the variation of the simulated plasma velocity, density, temperature, and magnetic field at 1 AU, as well as the location of the solar coronal hole sources relative to the observer at 1 AU, it was possible to provide some insight into the identification of the solar sources of interplanetary disturbances. Two definitions for angle locating the solar source of interplanetary disturbances at 1 AU are presented and discussed. The results are applied to the suggestion by Hewish (1988) that low-latitude coronal holes are suitably positioned to be the sources of major geomagnetic storms when the holes are in the eastern half of the solar hemisphere at the time of the commencement of the storm. The results indicate that, for these cases, the streams emanating from within the hole must be very fast, greater than 1000 km/s, or very wide, greater than 60 deg, at the inner boundary of 18 solar radii.

Smith, Z.↗

Sublimation rates of carbon monoxide and carbon dioxide from comets at large heliocentric distances

Using a simple model for outgassing from a small flat surface area, the sublimation rates of carbon monoxide and carbon dioxide, two species more volatile than water ice that are known to be present in comets, are calculated for a suddenly activated discrete source on the rotating nucleus. The instantaneous sublimation rate depends upon the comet's heliocentric distance and the Sun's zenith angle at the location of the source. The values are derived for the constants of CO and CO2 in an expression that yields the local rotation-averaged sublimation rate as a function of the comet's spin parameters and the source's cometocentric latitude.

Sekanina, Zdenek↗

Jet induced star formation in centrally dominant galaxies?

Using U-I CCD color maps of two centrally dominant cluster galaxies, we find unusual color structures which may be due to star formation which has been induced by their radio sources. These objects, located in the clusters A1795 and A2597, have blue central colors to radii of 20 kpc, spatially extended emission-line structures, and powerful radio sources. They reside at the centers of cooling flows with mass-accretion rates which are estimated to be approximately greater than 300 solar mass/yr. The regions of bluest local color are superposed on or along their radio-source structures. Our observations suggest that the radio sources associated with these objects may be inducing massive star formation in their central 20 kpc. The star formation may be the result of the radio plasma interacting with the warm emission-line gas and dense, x-ray emitting filaments similar to those recently discovered in two other clusters with the ROSAT Observatory. Since radio jets are likely to be transient, this may help to explain the scatter in the correlations between color and mass-accretion rate, although other factors may also contribute. Alternatively, scattered radiation from a hidden active nucleus or recent mergers may be responsible for the color structure. The color and radio properties of these objects are qualitatively similar but smaller in luminosity and spatial extent to those found in high redshift radio galaxies. Our observations of galaxies at z approximately = 0.06-0.1 show that processes similar to 'the alignment effect' found in high redshift radio galaxies occur at more recent epochs.

Mcnamara, Brian R.↗

Oceanic transform earthquakes with unusual mechanisms or locations - Relation to fault geometry and state of stress in the adjacent lithosphere

Results are presented of a search for transform earthquakes departing from the pattern whereby they occur on the principal transform displacement zone (PTDZ) and have strike-slip mechanisms consistent with transform-parallel motion. The search was conducted on the basis of source mechanisms and locations taken from the Harvard centroid moment tensor catalog and the bulletin of the International Seismological Center. The source mechanisms and centroid depths of 10 such earthquakes on the St. Paul's, Marathon, Owen, Heezen, Tharp, Menard, and Rivera transforms are determined from inversions of long-period body waveforms. Much of the anomalous earthquake activity on oceanic transforms is associated with complexities in the geometry of the PTDZ or the presence of large structural features that may influence slip on the fault.

Wolfe, Cecily J.↗

On the Retrieval of Lightning Radio Sources from Time-of-Arrival Data

We examine the problem of retrieving three-dimensional lightning locations from radio frequency Time-Of-Arrival (TOA) measurements. Arbitrary antenna locations are considered. By judiciously differencing measurements that are related to the location of the antennas and their excitation times, the problem is converted from the initial spherical nonlinear form to a system of linear equations. In the linear formalism, the source location and time-of-occurrence is viewed geometrically as an intersection of hyperplanes in the four-dimensional Minkowski space (x,y,z,t). The linear equations are solved to obtain explicit analytic expressions for the location and time variables. Retrieval errors are not interpreted with conventional Geometrical Dilution of Precision (GDOP) arguments as discussed by Holmes and Reedy (1951), but with more recent inversion analyses considered by Twomey (1977). Measurement errors are propagated analytically so that the specific effect of these errors on the solution is clarified. The sensitivity of the solution on the number of antennas used, antenna network geometry, source position, and measurement differencing schemes are discussed in terms of the eigenvalues of the linear system.

Koshak, William J.↗

VLA observations of solar active regions at 6 cm wavelength

Synthesized maps of two solar active regions obtained from observations with the Very Large Array (VLA) with 9-arcsec resolution are presented. The most intense sources in these regions are found to be associated with filamentary structures and magnetic neutral lines as shown in H-alpha and photospheric magnetograms. These sources are not located directly over sunspots in disagreement with earlier observations. EUV and X-ray observations have suggested that similar structures should be visible at cm wavelengths around but, outside of, sunspots if the magnetic field is sufficiently strong. These results are consistent with the locations of hot (greater than 1,000,000 K) plasmas in active regions expected from generalization based on optical photographs. Given the sizes of the radio sources, the volume emission measures of soft X-rays observed from OSO-8 rule out the possibility of thermal bremsstrahlung being of any significance, as far as the 6 cm emission is concerned. Therefore, gyroresonance absorption process is the most likely cause of 6 cm emission from these sources, and its likelihood is enhanced by the magnetic field geometry that is known to exist over filaments and neutral lines.

Kundu, M. R.↗

Mirror Illumination and Spillover Measurements of the Atacama Cosmology Telescope

The Atacama Cosmology Telescope (ACT) is a 6 m telescope designed to map the Cosmic Microwave Background (CMB) simultaneously at 145 GHz, 220GHz and 280GHz, The receiver in ACT, the Millimeter Bolometer Array Camera, features 1000 TES bolometers in each band, The detector performance depends critically on the total optical loading, requiring the spmover contributions from the optics to be minimal. This inspired the use of a cold Lyot stop to limit the illumination of the primary and the use of guard rings surrounding the primary and secondary reflectors. Here, we present a direct measurement of the illumination aperture for both reflectors and of the attenuation level outside the main optical path. We used a 145 GHz, 1 m W source and a chopper wheel to produce a time-varying signal with a broad heam proflle, We sampled the response of the camera for different locations of the source, placed in front and beside the primary and secondary mirrors. The aperture of the primary was measured to be 5,72 plus or minus 0,17m in diameter (95 plus or minus 3% of its geometrical size), while the aperture of the secondary yielded 2 plus or minus 0.12m in diameter. Both apertures are consistent with the optical design. Comparing to previous measurements of the beam solid angle from planet observations, we estimate an optical efficiency of 72.3 plus or minus 4,8%. We found that the attenuation outside the primary aperture was -16 plus or minus 2dB, which is below the theoretical expectations, and -22 plus or minus 1 dB outside the secondary aperture, which is consistent with simulations. These results motivated the extension of the baffles surrounding the secondary mirror, with the following reduction in detector optical loading from 2,24 pW to 188pW.

Gallardo, Patricio↗

The open-source neutral-mass spectrometer on Atmosphere Explorer-C, -D, and -E.

The open-source mass spectrometer will be used to obtain the number densities of the neutral atmospheric gases in the mass range 1 to 48 amu at the satellite location. The ion source has been designed to allow gas particles to enter the ionizing region with the minimum practicable number of prior collisions with surfaces. This design minimizes the loss of atomic oxygen and other reactive species due to reactions with the walls of the ion source. The principal features of the open-source spectrometer and the laboratory calibration system are discussed.

Nier, A. O.↗

Comparison of C(+) distributions with new interstellar sources of HCO emission

The present investigation is concerned with two new sources of HCO emission (Sgr B2 and DR 21). The column densities of HCO are low in all objects observed. The data are consistent with HCO being located near appreciable sources of ultraviolet excitation as predicted by dJDB models. The correlation of C(+) and HCO expected from these models is less certain. Although two examples of good correlation are found (NGC 2024 and DR 21), three other regions (Sgr B2, Orion A, and Rho Oph) were observed where either CRRL emission was present and not HCO emission or vice versa. It is possible that this could be a result of low sensitivity or incomplete sampling or source geometry.

Hollis, J. M.↗

Directory of aerospace safety specialized information sources

A directory is presented to make available to the aerospace safety community a handbook of organizations and experts in specific, well-defined areas of safety technology. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, as well as information in hazard and failure cause identification, accident analysis, materials characteristics, and other related subject areas. These 171 organizations and their staff members, hopefully, should provide technical information in the form of documentation, data and consulting expertise. These will be sources that have assembled and collated their information, so that it will be useful in the solution of engineering problems. One of the goals of the project in the United States that have and are willing to share data of value to the aerospace safety community.

Fullerton, E. A.↗

Theoretical overview and modeling of the sodium and potassium atmospheres of mercury

A general theoretical overview for the sources, sinks, gas-surface interactions, and transport dynamics of sodium and potassium in the exospheric atmsophere of Mercury is given. Information for these four factors, which control the spatial distribution of these two alkali-group gases about the planet, is incorporated in numerical models. The spatial nature and relative importance of the initial source atom atmosphere and the ambient (ballistic hopping) atom atmosphere are then examined and are shown to be controlled and coupled to a great extent by the extremely large and variable solar radiation acceleration experienced by sodium and potassium as they resonantly scatter solar photons. The lateral (antisunward) transport rate of thermally accommodated sodium and potassium ambient atoms is shown to be driven by the solar radiation acceleration and, over a significant portion of Mercury's orbit about the Sun, is sufficiently rapid to be competitive with the short photoionization lifetimes for these atoms when they are located on the summit surface near or within about 30 deg of the terminator. The lateral transport rate is characterized by a migration time determined by model calculations for an ensemble of atoms initially starting at a point source on the surface (i.e., a numerical spacetime dependent Green's function). Four animations for the spacetime evolution of the sodium (or potassium) atmosphere produced by a point source on the surface are presented on a videotape format. For extended surface sources for sodium and potassium, the local column density is determined by competition between the photoionization lifetimes and the lateral transport times of atoms originating from different surface source locations. Sodium surface source fluxes (referenced to Mercury at perihelion) that are required on the sunlit hemisphere to reproduce the typically observed several megarayleighs of D2 emission-line brightness and the inferred column densities of 1-2 x 10(exp 11) atoms per sq cm range from approximately 2-5 x 10(exp 7) atoms/sq cm/sec. The sodium model is applied to study observational data that document an anticorrelation in the average sodium column density and solar radiation acceleration. Lateral transport driven by the solar radiation acceleration is shown to produce this behavior for combinations of different sources and surface accomodation coefficients. The best fit model fits to the observational data require a significant degree of thermal accommodation of the ambient sodium atoms to the surface and a source rate that decreases as an inverse power of 1.5 to 2 in heliocentric distance.

Smyth, William H.↗

An observation of atmospheric gravity wave cause and effect during October 1985 WAGS campaign

Moderate geomagnetic activity followed by a large scale TID was observed in Europe and eastern North America near 1200 UT on October 18, 1985 during the Worldwide Atmospheric Gravity Wave Study. The speed and direction of the TID are estimated, suggesting that it was caused by an atmospheric gravity wave expanding from a localized source over the Arctic Ocean. Auroral imaging shows that the source region was located near the westward edge of an expanding auroral bulge and may have been associated with a westward traveling surge. The TID periods increased with distance from the source region and the largest TID amplitudes were seen along a line perpendicular to the orientation of the auroral oval.

Rice, D. D.↗

Acoustic design considerations: Review of rotor acoustic sources

It is not sufficient to optimize a rotor design in terms of a single noise level calculated for a single flight condition and a single measurement location. The various noise sources, their frequency content, amplitude, and directivity as a function of operating condition must be considered. A summary of the frequency ranges, directivity patterns and the most important operational and design parameters for major rotor noise sources is presented. It is difficult to generalize design requirements for rotor noise because the acoustic output varies so widely depending on the noise source, flight condition, measurement location, and frequency range. However, assuming the rotor must lift a fixed nominal payload and operate over a wide range of flight conditions, three general design guidelines can be stated: (1) minimize tip Mach number; (2) minimize blade thickness in the tip region; and (3) minimize gradients in the spanwise lift distribution in the tip region. Constraints on blade thickness, maximum values for hover tip Mach number, advancing tip Mach number and spanwise lift coefficient gradient will be specified during the aerodynamic, dynamic and structural optimization process. The rotor noise sources to be considered include the low frequency loading and thickness noise, and the higher frequency noise due to blade-vortex interactions (BVI). The analyses to be employed will include the comprehensive rotor analysis and design program CAMRAD and the rotor noise prediction program WOPWOP.

Martin, Ruth M.↗

Performance Evaluation of Block Acquisition and Tracking Algorithms Using an Open Source GPS Receiver Platform

Location technologies have many applications in wireless communications, military and space missions, etc. US Global Positioning System (GPS) and other existing and emerging Global Navigation Satellite Systems (GNSS) are expected to provide accurate location information to enable such applications. While GNSS systems perform very well in strong signal conditions, their operation in many urban, indoor, and space applications is not robust or even impossible due to weak signals and strong distortions. The search for less costly, faster and more sensitive receivers is still in progress. As the research community addresses more and more complicated phenomena there exists a demand on flexible multimode reference receivers, associated SDKs, and development platforms which may accelerate and facilitate the research. One of such concepts is the software GPS/GNSS receiver (GPS SDR) which permits a facilitated access to algorithmic libraries and a possibility to integrate more advanced algorithms without hardware and essential software updates. The GNU-SDR and GPS-SDR open source receiver platforms are such popular examples. This paper evaluates the performance of recently proposed block-corelator techniques for acquisition and tracking of GPS signals using open source GPS-SDR platform.

Ramachandran, Ganesh K.↗

A generalized method for optimization of active noise controllers in three-dimensional spaces

In this investigation, the formulation of an optimal active noise controller for harmonic, enclosed sound fields is derived using an indirect boundary element method. The optimal active noise controller is defined as the volume velocity secondary source strengths which minimize the sound pressure level at a number of discrete interior locations. In addition, the formulation of an optimal active noise controller which minimizes the free field power radiated from a generalized, distributed noise source is presented. Representative results are provided for each formulation. For the enclosure problem, results are given for global control, local control, and passive wall treatments using a rectangular cavity. For the free field radiation problem, the effects of secondary source location and quantity on active noise controller performance are investigated. The relative merits of each formulation are discussed.

Mollo, C. G.↗

Experimental evaluation of the ring focus test for X-ray telescopes using AXAF's technology mirror assembly, MSFC CDDF Project No. H20

A test method particularly suited for X-ray telescopes was evaluated experimentally. The method makes use of a focused ring formed by an annular aperture when using a point source at a finite distance. This would supplement measurements of the best focus image which is blurred when the test source is at a finite distance. The telescope used was the Technology Mirror Assembly of the Advanced X-ray Astrophysis Facility (AXAF) program. Observed ring image defects could be related to the azimuthal location of their sources in the telescope even though in this case the predicted sharp ring was obscured by scattering, finite source size, and residual figure errors.

Zissa, D. E.↗