Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum state engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Simultaneous inference of the compressibility and inelastic response of tantalum under extreme loading

We study the deformation of tantalum under extreme loading conditions. Experimental velocity data are drawn from both ramp loading experiments on Sandia’s Z-machine and gas gun compression experiments. The drive conditions enable the study of materials under pressures greater than 100 GPa. We provide a detailed forward model of the experiments including a model of the magnetic drive for the Z-machine. Utilizing these experiments, we simultaneously infer several different types of physically motivated parameters describing equation of state, plasticity, and anelasticity via the computational device of Bayesian model calibration. Characteristics of the resulting calculated posterior distributions illustrate relationships among the parameters of interest via the degree of cross correlation. The calibrated velocity traces display good agreement with the experiments up to experimental uncertainty as well as improvement over previous calibrations. Examining the Z-shots and gun-shots together and separately reveals a trade-off between accuracy and transferability across different experimental conditions. Implications for model calibration, limitations from model form, and suggestions for improvements are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Dipole ladders with large Hubbard interaction in a moiré exciton lattice

Two-dimensional semiconductor moiré superlattices have emerged as a powerful platform for engineering correlated electronic phenomena. On the other hand, optical excitation creates charge neutral interlayer excitons with an out-of-plane electric dipole. Strong onsite dipole–dipole interaction promises the formation of correlated bosonic states, akin to the Mott states of electrons, but has not yet been demonstrated. Here we report a large interaction between excitons occupying the same moiré lattice site—characterized by the Hubbard U parameter—and consequent dipole ladders with spin- and electron-filling dependence in WSe 2 /WS 2 moiré superlattices. Photoluminescence measurements show successive peaks emerging with an energy separation of around 34 meV above the ground state as the exciton density is increased. This corresponds to the sequential injection of excitons into a single site with an energy cost to overcome the large exciton Hubbard U, forming a dipole ladder. Based on findings of local magnetic moments at two holes per moiré cell, we show that excitons can also fill a second moiré orbital, establishing the two-orbital nature of the moiré potential landscape. Our results show that the Bose–Hubbard model with possible exciton crystal phases can be investigated in interacting opto-moiré quantum matter.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Identifying materials-level sources of performance variation in superconducting transmon qubits

The Superconducting Quantum Materials and Systems Center, a U. S. Department of Energy National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various non-destructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T1 lifetime across different qubits on the same chip. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

Murthy, Akshay A. [Fermilab] (ORCID:00000001767768↗
DOE OSTI2021

Interpretations of ground-state symmetry breaking and strong correlation in wavefunction and density functional theories

Significance The ground state of a quantum mechanical system is the lowest-energy eigenstate of the Hamiltonian. In isolation, it persists unchanged forever, with symmetries dictated by those of the Hamiltonian. But near-eigenstates of broken symmetry can persist for long times, even on the scale of human measurement. The appearance of broken symmetries of the electron density or spin density in a density functional calculation can reveal strong correlations among the electrons that are present in a symmetry-unbroken wavefunction. Symmetry breaking can arise when a wave-like fluctuation drops to zero frequency. The presented examples are the stretched hydrogen molecule, antiferromagnetism in solids, and the static charge-density wave in a low-density jellium, which is shown quantitatively to be a zero-frequency plasma wave.

42 ENGINEERING↗
DOE OSTI2024

Ultrastrong magnon-magnon coupling and chiral spin-texture control in a dipolar 3D multilayered artificial spin-vortex ice

Strongly-interacting nanomagnetic arrays are ideal systems for exploring reconfigurable magnonics. They provide huge microstate spaces and integrated solutions for storage and neuromorphic computing alongside GHz functionality. These systems may be broadly assessed by their range of reliably accessible states and the strength of magnon coupling phenomena and nonlinearities. Increasingly, nanomagnetic systems are expanding into three-dimensional architectures. This has enhanced the range of available magnetic microstates and functional behaviours, but engineering control over 3D states and dynamics remains challenging. Here, we introduce a 3D magnonic metamaterial composed from multilayered artificial spin ice nanoarrays. Comprising two magnetic layers separated by a non-magnetic spacer, each nanoisland may assume four macrospin or vortex states per magnetic layer. This creates a system with a rich 16 N microstate space and intense static and dynamic dipolar magnetic coupling. The system exhibits a broad range of emergent phenomena driven by the strong inter-layer dipolar interaction, including ultrastrong magnon-magnon coupling with normalised coupling rates of $\frac{Δf}{v}$ = 0.57, GHz mode shifts in zero applied field and chirality-control of magnetic vortex microstates with corresponding magnonic spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Detecting Fractional Chern Insulators in Optical Lattices Through Quantized Displacement

The realization of interacting topological states of matter such as fractional Chern insulators (FCIs) in cold atom systems has recently come within experimental reach due to the engineering of optical lattices with synthetic gauge fields providing the required topological band structures. However, detecting their occurrence might prove difficult since transport measurements akin to those in solid state systems are challenging to perform in cold atom setups and alternatives have to be found. Here, we show that for a ν = 1/2 FCI state realized in the lowest band of a Harper-Hofstadter model of interacting bosons confined by a harmonic trapping potential, the fractionally quantized Hall conductivity σ xy can be accurately determined by the displacement of the atomic cloud under the action of a constant force which provides a suitable experimentally measurable signal for detecting the topological nature of the state. Using matrix-product state algorithms, we show that, in both cylinder and square geometries, the movement of the particle cloud in time under the application of a constant force field on top of the confining potential is proportional to σ xy for an extended range of field strengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Nanosecond Structure of Radical Pair Intermediates from High-Frequency Quantum Oscillations: Insight into the Q A •– to Q B Electron Transfer Step in Purple Bacterial Photosynthesis

We demonstrate the validity of our approach to deduce, from the anisotropy of quantum oscillations, the geometry of short-lived radical pair intermediates in photosynthesis. A global fit of a two-dimensional W-band (94 GHz) electron paramagnetic resonance (EPR) experiment provides the same global minimum values for the geometry of the A-side radical pair P 700 •+ A 1A •− in photosystem I (PSI) as observed in a previous Q-band (34 GHz) EPR study, yet with a significantly increased convergence rate of 62%. This demonstrates that the global fit yields the correct radical pair geometry even at Q-band frequencies. With this information, we revisit our previous Q-band study of the cofactor arrangement of P 865 •+ Q A •− , the stabilized charge-separated state in purple bacterial reaction centers (RCs). Analysis of calculated two-dimensional data sets of P 865 •+ Q A •− reveals that the quantum oscillation technique is unaffected by a mirror ambiguity in disordered solids and thus can provide unambiguous solutions for all five Euler angles of the radical pair geometry. This enables us to elucidate the Q A •− to Q B electron transfer step in purple bacterial photosynthesis, the subject of controversial discussions for more than 25 years. Our results show that this electron transfer step involves a gating mechanism requiring a 60° rotation of the headgroup of Q A •− in its binding pocket.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Defect Equilibria from First Principles: From Widegap Oxides to Topological Semimetals

Materials functionality and performance is rarely determined by the ideal crystal alone but is usually affected by formation of imperfections and the solution of impurities. In some applications, such as solar thermochemical hydrogen generation, defect formation is the fundamentally enabling mechanism of the desired functionality. In other cases, such as Cd3As2 topological semimetals, unintentional self-doping presents an obstacle to the access to the unique electronic properties. In either case, a quantitative understanding of the relevant defect mechanism is essential for developing design strategies. This presentation will touch upon numerous aspects in the computational simulation of defect equilibria, including non-equilibrium design strategies, the coupling of solid state and gas-phase reactions, dopant-defect and defect-defect interactions, both attractive and repulsive, the accuracy of total energy functionals and electronic structure methods, and the role of the shape of the density of states for the charge balance condition and Fermi level position, as well as machine-learning prediction of defect energies (1). Specific materials systems include Ga2O3 (2), Cd3As2 (3), and (Sr,Ce)MnO3 (4). (1) M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. 3, 675 (2023). (2) A. Goyal, A. Zakutayev, V. Stevanovic, S. Lany, J. Appl. Phys. 129, 245704 (2021). (3) C. Brooks, M. van Schilfgaarde, D. Pashov, J.N. Nelson, K. Alberi, D.S. Dessau, S. Lany, Phys. Rev. B 107, 224110 (2023). (4) A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024).

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗
DOE OSTI2024

Hund’s coupling mediated multi-channel quantum phase transition of a single magnetic impurity in Fe(Se, Te)

Understanding the interplay between individual magnetic impurities and superconductivity is crucial for bottom-up construction of novel phases of matter. Sub-gap bound states that are used in this endeavor are typically considered as independent entities that each result from the exchange scattering between the respective impurity orbitals and electrons of the superconducting condensate. Here we present experimental evidence of individual multi-spin impurities where the sub-gap states are not independent. Specifically, we find that by tuning the energy of the state closest to zero through zero, all other sub-gap states change particle-hole asymmetry as well. We show that this can be understood by including Hund’s coupling, which favors high-spin configurations, into a multi-orbital Anderson model. Unlike for the case of independent spins, the transition we observe signals the simultaneous departure of more than one quasiparticle from the impurity, while the parity of the ground state may remain unchanged. Our results show that Hund’s coupling is not only crucial in generating high-spin impurities, but also to understand the transition between two distinct ground states, and should therefore be taken into account for e.g. impurity-based band-structure engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Spectroscopy of GR1 centers in synthetic diamonds

We report on the spectroscopic characterization, absorption saturation, and excited-state dynamics of GR1 centers in synthetic diamonds. The non-linear optical measurements reveal an efficient bleaching of the GR1 center’s ground level under ns-pulsed 633 nm excitation. The maxima of absorption and emission cross sections were estimated to be 4.5 × 10 −17 cm 2 and 9 × 10 −17 cm 2 at 630 nm and 780 nm, respectively. The radiative lifetime of the excited level was estimated to be 8.5 ns. The 658 nm probe kinetics uncovered relaxation of 1 T 2 excited level going predominantly to a metastable state with a lifetime of 220 μs. An induced absorption detected with the use of a highly concentrated diamond sample could be due to up-conversion and photoionization processes in additional impurity-vacancy center with absorption at the short-wavelength tail of GR1. The results presented here indicate that synthetic diamonds with GR1 centers could serve as near infrared gain media or passive Q-switchers for laser cavities over the 633–750 nm spectral range. Optimization of the center concentration and the crystal parameters are required to minimize the induced absorption at the lasing wavelengths.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Battery charging goes quantum

Rechargeable lithium-ion batteries power consumer electronics and electric vehicles, making them an essential component of the modern economy. Although lithium-ion battery technology has improved continuously over the past decades, widespread adoption of electrified transportation requires charging in less than 15 min to be competitive with internal combustion engines. As a battery charges and discharges, lithium ions travel across the electrode-electrolyte interface. The rate at which lithium ions transfer is dictated by the structure and physical properties of electrolytes and lithium-storing electrodes. Yet, the exact chemical reaction mechanism underlying the insertion of lithium ions at the electrode-electrolyte interface remains elusive. On page 46 of this issue, Zhang et al. (1) report experimental evidence that shows that lithium-ion battery charge and discharge occur through a coupled ion-electron transfer mechanism. Furthermore, this could establish an experimental and theoretical platform to extract key parameters for optimizing charge transfer rates in lithium-ion batteries.

Warburton, Robert E. [Case Western Reserve Univers↗
DOE OSTI2025

Spectroscopy of the fractal Hofstadter energy spectrum

Hofstadter’s butterfly, the predicted energy spectrum for non-interacting electrons confined to a two-dimensional lattice in a magnetic field, is one of the most remarkable fractal structures in nature. At rational ratios of magnetic flux quanta per lattice unit cell, this spectrum shows self-similar distributions of energy levels that reflect its recursive construction. For most materials, Hofstadter’s butterfly is predicted under experimental conditions that are unachievable using laboratory-scale magnetic fields. More recently, electrical transport studies have provided evidence for Hofstadter’s butterfly in materials engineered to have artificially large lattice constants, such as those with moiré superlattices. Yet, so far, direct spectroscopy of the fractal energy spectrum predicted by Hofstadter nearly 50 years ago has remained out of reach. Here, in this work, we use high-resolution scanning tunnelling microscopy/spectroscopy (STM/STS) to investigate the flat electronic bands in twisted bilayer graphene (TBG) near the predicted second magic angle, an ideal setting for spectroscopic studies of Hofstadter’s spectrum. Our study shows the fractionalization of flat moiré bands into discrete Hofstadter subbands and discerns experimental signatures of self-similarity of this spectrum. Moreover, our measurements uncover a spectrum that evolves dynamically with electron density, showing phenomena beyond that of Hofstadter’s original model owing to the combined effects of strong correlations, Coulomb interactions and the quantum degeneracy of electrons in TBG.

electronic properties and materials↗
DOE OSTI2021

Integrated structured light architectures

Abstract The structural versatility of light underpins an outstanding collection of optical phenomena where both geometrical and topological states of light can dictate how matter will respond or display. Light possesses multiple degrees of freedom such as amplitude, and linear, spin angular, and orbital angular momenta, but the ability to adaptively engineer the spatio-temporal distribution of all these characteristics is primarily curtailed by technologies used to impose any desired structure to light. We demonstrate a laser architecture based on coherent beam combination offering integrated spatio-temporal field control and programmability, thereby presenting unique opportunities for generating light by design to exploit its topology.

42 ENGINEERING↗
DOE OSTI2022

Stabilizing and Improving Qubit Coherence by Engineering the Noise Spectrum of Two-Level Systems

Superconducting circuits are a leading platform for quantum computing. However, their coherence times are still limited and exhibit temporal fluctuations. Those phenomena are often attributed to the coupling between qubits and material defects that can be well described as an ensemble of two-level systems (TLSs). Among them, charge fluctuators inside amorphous oxide layers contribute to both low-frequency 1 / f charge noise and high-frequency dielectric loss, causing fast qubit dephasing and relaxation. Moreover, spectral diffusion from mutual TLS interactions varies the noise amplitude over time, fluctuating the qubit lifetime. Here, we propose to mitigate those harmful effects by engineering the relevant TLS noise spectral densities. Specifically, our protocols smooth the high-frequency noise spectrum and suppress the low-frequency noise amplitude via depolarizing and dephasing the TLSs, respectively. As a result, we predict a drastic stabilization in qubit lifetime and an increase in qubit pure dephasing time. Our detailed analysis of feasible experimental implementations shows that the improvement is not compromised by spurious coupling from the applied noise to the qubit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Upper critical magnetic field and multiband superconductivity in artificial high-𝑇 𝑐 superlattices of nano quantum wells

Artificial high-T c superlattices (AHTS) composed of quantum building blocks with tunable superconducting critical temperature have been synthesized by engineering their nanoscale geometry using the Bianconi-Perali Valletta (BPV) two-gap superconductivity theory. These quantum heterostructures consist of quantum wells made of superconducting, modulation-doped Mott insulators (S), confined by a metallic (N) potential barrier. The lattice geometry has been carefully engineered to induce the predicted Fano-Feshbach shape resonance between the gaps, near a topological Lifshitz transition. Here, we validate the BPV theory by providing compelling experimental evidence that AHTS samples, at the peak of the superconducting dome, exhibit resonant two-band, two-gap superconductivity. This is demonstrated by measuring the temperature dependence of the upper critical magnetic field, μ 0 H c2 , in samples with superlattice periods 3.3 < d < 5.28 nm and L/d ratios close to the magic value 2/3 (where L is the thickness of the superconducting La 2 CuO 4 layer and d is the superlattice period). Here, the data reveal the predicted upward concavity in H c2 (T) and a characteristic kink in the coherence length as a function of temperature, confirming the predicted two-band superconductivity with Fermi velocity ratio ≈ 0.25 and significant pair-exchange term among the two condensates.

Heterostructures↗
DOE OSTI2021

Neural-adjoint method for the inverse design of all-dielectric metasurfaces

All-dielectric metasurfaces exhibit exotic electromagnetic responses, similar to those obtained with metal-based metamaterials. Research in all-dielectric metasurfaces currently uses relatively simple unit-cell designs, but increased geometrical complexity may yield even greater scattering states. Although machine learning has recently been applied to the design of metasurfaces with impressive results, the much more challenging task of finding a geometry that yields a desired spectra remains largely unsolved. We propose and demonstrate a method capable of finding accurate solutions to ill-posed inverse problems, where the conditions of existence and uniqueness are violated. A specific example of finding the metasurface geometry which yields a radiant exitance matching the external quantum efficiency of gallium antimonide is demonstrated. We also show how the neural-adjoint method can intelligently grow the design search space to include designs that increasingly and accurately approximate the desired scattering response. The neural-adjoint method is not restricted to the case demonstrated and may be applied to plasmonics, photonic crystal, and other artificial electromagnetic materials.

42 ENGINEERING↗
DOE OSTI2022

Topological surface superconductivity in FeSe 0.45 Te 0.55

The engineering of Majorana zero modes in topological superconductors, a paradigm for the realization of topological quantum computing and topology-based devices, has been hampered by the absence of materials with sufficiently large superconducting gaps. Recent experiments, however, have provided enthralling evidence for the existence of topological surface superconductivity in the iron-based superconductor FeSe 0.45 Te 0.55 possessing a full s> ± -wave gap of a few meV. Here, we propose a mechanism for the emergence of topological superconductivity on the surface of FeSe 0.45 Te 0.55 by demonstrating that the interplay between the s ± -wave symmetry of the superconducting gap, surface magnetism, and a Rashba spin–orbit interaction gives rise to robust topological superconducting phases. Moreover, the proposed mechanism explains a series of experimentally observed hallmarks of topological superconductivity, such as the emergence of Majorana zero modes in the center of vortex cores and at the end of line defects, as well as of chiral Majorana edge modes along domain walls. We also propose that the spatial distribution of supercurrents near a domain wall is a characteristic signature measurable via a scanning superconducting quantum interference device that can distinguish between chiral Majorana edge modes and trivial in-gap states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

ChIMES: A Machine-Learned Interatomic Model Targeting Improved Description of Condensed Phase Chemistry in Energetic Materials

In this report we detail completion of a Physics and Engineering Model Level Two Milestone targeting improved reactive interatomic potentials (IAPs) for energetic materials (EM) through machine learning. The specific goals of this milestone were to develop, validate, and document a new reactive molecular dynamics method for EM, based on machine learning by (1) generating databases of first-principles-derived forces, stresses, and energies for HN3 and 3,4-bis(3-nitrofurazan- 4-yl)furoxan (DNTF) (2) generate atomistic force fields from these databases via ML, and (3) benchmark model performance against first principles calculations. These goals were achieved by (1) further developing a machine learned reactive IAP and generation approach (i.e. the Chebyshev Interaction Model for Efficient Simulation or “ChIMES”), for which resulting IAPs can approach the predictive power of quantum-mechanical approaches at a fraction of the computational expense, and (2) applying the ChIMES framework to develop models for HN3 and DNTF. We find that for simple energetic materials like HN3, high accuracy ChIMES models can be obtained through application of a fitting approach that does not use active machine learning. We demonstrate the suitability of ChIMES models for simulations involving EM by using the HN3 model in multiscale shock technique simulations to predict the HN3 Chapman-Jouguet detonation state and investigate chemical evolution out to 1 ns following shock compression. This model is then used in larger direct shock (DS) simulations for a preliminary investigation of how bubbles (i.e. voids) influence material response under shock compression. We find that more complex EM (i.e. DNTF) necessitate a more sophisticated fitting approach, and develop a new active learning method and python tool to meet this challenge. We demonstrate that this fitting approach yields ChIMES models that out-perform commonly used standard reactive IAPs as well as semi-empirical quantum methods, and discuss the systematic improvability of these actively learned ChIMES models. We also describe challenges related to model development for EM such as DNTF, for which few experimental or previous simulation data are available (e.g. which could otherwise inform generation of training data). To overcome this issue, we establish a semi-empirical quantum ChIMES capability which can be used to efficiently map out relevant thermodynamic and configurational space, and generate ChIMES-IAP training data in a multiscale manner. We also show that these semi-empirical quantum ChIMES models can be used to generate predictions for the shock Hugoniot (the Hugoniot is the locus of thermodynamic states found in a shocked material) equation of state, investigate related thermochemistry, and explore carbon condensation following shock compression. This work represents a substantial advance in our atomistic modeling capability for EM that will provide much needed information on the chemistry of detonation for continued development of continuum models based on the Cheetah thermochemical code.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗