Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Preferential Solute Transport in Low Permeability Zones During Spontaneous Imbibition in Heterogeneous Porous Media

Multiphase flows in porous media|and the associated solute transport processes|are controlled by a combination of gravity, capillary, and viscous forces. Geologic heterogeneity influences flow and transport processes, yet gaps exist in our understanding of how heterogeneity impacts capillary-driven transport, such as during spontaneous imbibition. Here we use positron emission tomography, combined with a newly developed method for conducting spontaneous imbibition experiments, to observe solute transport into low permeability regions during imbibition. Using an experimentally parameterized 2D numerical model, we demonstrate how capillary-driven ow near the imbibition front can carry solutes into low permeability regions. This process displaces solutes from high permeability zones while the cumulative amount of solute in low permeability zones increases- opposite of what is observed under fully saturated solute transport conditions. These results highlight the complex flow and solute transport behavior that arise during multiphase displacements in heterogeneous geologic porous media.

58 GEOSCIENCES↗
DOE OSTI2025

The role of fast and slow dynamics in nonlinear resonant ultrasound spectroscopy of consolidated granular materials

Abstract Elastic nonlinearity observed in consolidated granular media can be attributed to the combination of slow and fast effects, which give rise to hysteresis and relaxation of both modulus and damping after the sample is perturbed. A consequence is a high level of complexity in the measurements of the sample linear and nonlinear elastic parameters. The results of experiments are dependent on the experimental protocol that is adopted to measure the relevant quantities and it is hard to quantify parameters with accuracy and repeatability. Here we focus on examining Nonlinear Resonant Ultrasound Spectroscopy, showing experimentally the role of slow dynamics in the process and quantifying/discussing its influence on the quantification of nonlinearity. We also propose a model to describe the process, which shows that different contributions to nonlinearity (e.g., classical and hysteretic) could be due to physical features (defects) relaxing with different relaxation times.

Science & Technology - Other Topics↗
DOE OSTI2021

Understanding the setting and hardening process of wollastonite-based brushite cement. Part 2: Influence of the boron and aluminum concentrations in the mixing solution

The mixing solution of wollastonite-based brushite cement is a phosphoric acid solution containing metallic cations and borax. This work complements a previous study devoted to the influence of the H{sub 3}PO{sub 4} concentration, Ca/P and liquid-to-solid (l/s) ratios on the setting and hardening process of the binder by providing new insight into the role of aluminum and boron. Boron retards the setting and decreases the heat released during the process. It also contributes to reduce the macroporosity of the hardened material but yields to poor compressive strength. With aluminum in the mixing solution, the mechanical properties are greatly improved thanks to the precipitation of an amorphous aluminophosphate which increases the density of the cement matrix. But aluminum alone leads to fast setting. A joint addition of boron and aluminum to the mixing solution makes it possible to get a material with optimized properties both in fresh and hardened states.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molten Salt Corrosion Tests of Additively Manufactured Stainless Steel 316H

Molten salt reactors (MSRs) have drawn considerable interest due to their favorable safety features, high thermal efficiency, and compatibility with different fuel cycles. Yet, the success of MSRs hinges critically on the performance of structural materials to be used in these aggressive molten salt environments, where corrosion and material compatibility remain primary challenges to long-term reliability. Additively manufactured (AM) nuclear structural materials prompt the use of novel geometries and compositions to enhance material performance and reduce costs of constructing MSRs. The rapid solidification conditions inherent to AM processing impart distinctive microstructural features, including cellular sub-structures, dislocation densities, residual stress, and oxide inclusions, which can influence material performance in MSR components. While the mechanical properties of AM stainless steels have been widely studied, their corrosion behavior, particularly in molten salt environments, has received far less attention. Addressing these needs, the Advanced Materials and Manufacturing Technologies (AMMT) program provides a framework for systematically evaluating how unique microstructures produced by AM processes influence the performance of these materials in these demanding environments and for developing reproducible testing workflows that can support future code qualification efforts and standards development. Bridging this knowledge gap is essential for assessing the viability of AM alloys in MSRs and informing qualification strategies. A further challenge is the absence of standardized protocols for molten salt corrosion testing. Accordingly, this report provides an account of the corrosion evaluation of AM 316H stainless steel in NaCl 2 -MgCl 2 molten salt at 550 °C, with exposure times of 100 and 500 hours. It documents the experimental procedures implemented under the AMMT program, including salt preparation, exposure protocols, and post-test characterization methods, to establish reproducibility and transparency. Importantly, the study examines AM 316H samples in the as-fabricated condition, directly reflecting the surface state most relevant to engineering applications, and compares their behavior to machine-cut surfaces. Overall, preliminary evaluations have noted that surface conditions (e.g. morphology, contamination, etc.) have a noticeable impact on the corrosion resiliency. The impact of the corrosion is difficult to detect at 100h, unless, in the case of AM 316H, the specimen surface is decontaminated. After 500 h, as-fabricated surfaces of AM and wrought 316H display evidence of general versus preferential corrosion attack, respectively. Both AM and wrought 316H machine-cut surfaces exhibit a continuous Cr depletion zone, evident of general corrosion. While the estimated extent of corrosion appears within the same order of magnitude regardless of the surface condition, it is apparent that more predictable behavior is observed on machine-cut surfaces. Nonetheless, further investigation is necessary to fully elucidate the corrosion mechanism under these conditions.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Earth's water reservoirs in a changing climate

Progress towards achieving a quantitative understanding of the exchanges of water between Earth's main water reservoirs is reviewed with emphasis on advances accrued from the latest advances in Earth Observation from space. These exchanges of water between the reservoirs are a result of processes that are at the core of important physical Earth-system feedbacks, which fundamentally control the response of Earth's climate to the greenhouse gas forcing it is now experiencing, and are therefore vital to understanding the future evolution of Earth's climate. The changing nature of global mean sea level (GMSL) is the context for discussion of these exchanges. Different sources of satellite observations that are used to quantify ice mass loss and water storage over continents, how water can be tracked to its source using water isotope information and how the waters in different reservoirs influence the fluxes of water between reservoirs are described. The profound influence of Earth's hydrological cycle, including human influences on it, on the rate of GMSL rise is emphasized. The many intricate ways water cycle processes influence water exchanges between reservoirs and thus sea-level rise, including disproportionate influences by the tiniest water reservoirs, are emphasized.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A high-throughput approach for statistical process optimization in Laser Powder Bed Fusion

Process variability is inherent in metal additive manufacturing (AM). However, it is often overlooked in process optimization frameworks, constraining the understanding of process uncertainties and their influence on parameter selection. To address this, we present an integrated framework that combines high-throughput single-track experiments, GAN-based melt pool geometry extraction, robust statistical and machine learning modeling, and uncertainty-quantified process mapping. Process variability is characterized through single-track melt pool behaviors, and its influence on defect formation is systematically quantified to enable statistically guided process parameter optimization. This approach is demonstrated on Laser Powder Bed Fusion (L-PBF) of stainless steel 316L, effectively capturing the interplay between process parameters, melt pool variability, and defect probability. By integrating uncertainty quantification into process optimization, this study provides a structured methodology for addressing variability challenges in AM quality control, ultimately contributing to enhanced manufacturing reliability.

Laser Powder Bed Fusion↗
DOE OSTI2022

The Influence of Dust-Smoke Mixtures on Boundary Layer Processes and Nocturnal Warming in the Sahel

Using a single column model with ground-based, aircraft, and satellite data sets we assess the combined role of smoke and dust aerosols, land degradation/aridization (LDA), and their impact on the planetary boundary layer (PBL) in influencing near-surface air temperature over the Sahel. Our study is unique because it assesses the combined role of smoke and dust aerosols on PBL evolution and near-surface air temperatures during both day and nighttime. More importantly, using a theoretical framework, we provide a careful explanation of the geophysical processes responsible for the changes in PBL and near-surface air temperature. Our results indicate that during northern hemisphere winter months, dust, and smoke over Sahel radiatively combine to impact the PBL. We show that aerosol mixtures dominated by dust modify PBL height in a manner that minimizes/maximizes surface layer cooling/warming at times when daytime maximum/nocturnal minimum temperatures occur. Furthermore, we find that increasing smoke contribution to total column aerosol optical extinction counteracts nighttime warming through daytime cooling. When smoke constitutes half or more of to the total column aerosol optical extinction, the ratio of longwave to shortwave radiative forcing is less than 10%, and nighttime cooling ensues. Minimum temperature is most sensitive to changes in mid-visible aerosol optical depth (AOD) values <1 and doubling of dust AOD within this range during the 1950–1980 Sahelian LDA event is estimated to have a nocturnal warming potential of 0.6°C.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

Water Storage and Transport Processes During Impact Experiments on Nominally Anhydrous Minerals

Water, in the form of structurally bound hydrogen in the crystal lattice of nominally anhydrous minerals (NAMs), strongly influences many important physical processes on terrestrial planets and planetary objects. Water enhances the rates of plastic deformation and controls the degree of partial melting in silicate rocks, which influences the generation of melt and therefore the nature of planetary volcanism. Water has also been experimentally demonstrated to influence the nature of lattice preferred orientation in deformed aggregates, and thus may be important in the interpretation of seismic anisotropy data collected from planetary bodies, such as from the current InSight mission on Mars. Therefore, much attention has been focused on characterizing the distribution and concentration of water in the planets and rocky bodies of our solar system.

Tielke, J.↗
NASA NTRS1996

Aerodynamic Influence Coefficient Computations Using Euler/Navier-Stokes Equations on Parallel Computers

Modem design requirements for an aircraft push current technologies used in the design process to their limit or sometimes require more advanced technologies to meet the requirement. New design requirements always demand to improve the operational performance. Accurate prediction of aerodynamic coefficients is essential to improve the performance. For example, in the design of an advanced subsonic civil transport, since the fluid flow at transonic regime shows strong nonlinearities, high fidelity equations, such as the Euler or Navier-Stokes equations predict flow characteristics more accurately than the linear aerodynamics, which are widely used in the current design process However, high fidelity flow equations are computationally expensive and require an order of magnitude longer time to obtain aerodynamic coefficients required in the design. Parallel computing is one possibility to cut down the computational turn-around time in using high fidelity equations so that high fidelity equations would be incorporated into the design process. By doing so, high fidelity equations would be used in the routine design process. This work will demonstrate the feasibility of using high fidelity flow equations in a design process by computing aerodynamic influence coefficients of a wing-body-empennage configuration on a multiple-instruction, multiple-data parallel computer.

Byun, Chansup↗
NASA NTRS2005

The Influence of Local Geometric Effects on Mars Polar Processes

Using simple, qualitative heat balance models, this paper addresses textures and structures that will result from the evolution of volatile layers by accretion and by ablation. Such phenomena may have global implications that are not apparent when only flat or sloped surfaces are modeled. In general, structures such as mounds or depressions formed out of volatile materials will evolve in shape such that the growth or retreat of any particular surface will be maximized. It can be shown that the local radius of curvature is proportional to the growth or retreat rate. For example, icy surfaces will tend to form facets that face the dominant sun direction. Two such cases are evaluated: a) Features associated with condensation of volatiles, include cold-trapping and redistribution, such as the concentration of frost around the Viking 2 lander [1]. Here I will focus on textures that likely result from the formation of seasonal CO2 deposits. b) Features associated with sublimation of volatiles, such as those described by Ingersoll et. al. [2] result in textured surfaces that affect both the apparent emissivity and albedo. Similar calculations have been performed with respect to the "Swiss cheese" features on the South Polar Cap [3]. Here, I evaluate the likely sublimation rates from optimal ice scarp structures and their implications for the long-term evolution of the polar caps and formation of layered terrain.

Hecht, M. H.↗
NASA NTRS2024

Global Influence of Organic Aerosol Volatility on Aerosol Microphysical Processes: Composition and Number

We present MATRIX-VBS, a new aerosol scheme that simulates organic partitioning in an aerosol microphysics model, as part of the NASA GISS ModelE Earth System Model. MATRIX-VBS builds on its predecessor aerosol microphysics model MATRIX (Bauer et al., 2008, https://doi.org/10.5194/acp-8-6003-2008) and was developed in the box model framework (Gao et al., 2017, https://doi.org/10.5194/gmd-10-751-2017). The scheme features the inclusion of organic partitioning between the gas and particle phases and the photochemical aging process using the volatility-basis set (Donahue et al., 2006, https://doi.org/10.1021/es052297c). To assess the performance of the new model, we compared its mass concentration, number concentration, and activated number concentration to the original scheme MATRIX, and evaluated its mass concentrations in four seasons against data from the NASA Atmospheric Tomography Mission (ATom) aircraft campaign. Results from MATRIX-VBS show that organics are transported further away from their source, and their mass concentration increases aloft and decreases at the surface compared to those in MATRIX. The mass concentration of organics at the surface agrees well with measurements, and there are discrepancies for vertical profiles aloft. In the new scheme, the global mass load of organic aerosols increased by 50%, there is also an increased number of particles at the surface and fewer activated ones in most regions. The new scheme presents advanced and more comprehensive capability in simulating aerosol processes.

aerosol modeling↗
NASA NTRS1984

Low energy antiprotons from supernova exploding in dense clouds

The antiproton spectrum resulting from a supernova, which exploded inside a dense cloud, is calculated by taking into account all energy loss processes including adiabatic deceleration during the expansion phase. The influence of various energy loss processes on the evolution of the spectrum as the supernova expands is investigated. It is shown that if about 25 percent of the cosmic ray nucleons are from such sources, the observed low energy antiprotons can be explained, provided the effect of solar modulation is not very large. The possibility of obtaining enhanced low energy spectrum by this process is also examined.

Stephens, S. A.↗
NASA NTRS2003

Flow Visualization of Low Prandtl Number Fluids using Electrochemical Measurements

It is well established that residual flows exist in contained liquid metal processes. In 1-g processing, buoyancy forces often drive these flows and their magnitudes can be substantial. It is also known that residual flows can exist during microgravity processing, and although greatly reduced in magnitude, they can influence the properties of the processed materials. Unfortunately, there are very few techniques to visualize flows in opaque, high temperature liquid metals, and those available are not easily adapted to flight investigation. In this study, a novel technique is developed that uses liquid tin as the model fluid and solid-state electrochemical cells constructed from Yttria-Stabilized Zirconia (YSZ) to establish and measure dissolved oxygen boundary conditions. The melt serves as a common electrode for each of the electrochemical cells in this design, while independent reference electrodes are maintained at the outside surfaces of the electrolyte. By constructing isolated electrochemical cells at various locations along the container walls, oxygen is introduced or extracted by imposing a known electrical potential or passing a given current between the melt and the reference electrode. This programmed titration then establishes a known oxygen concentration boundary condition at the selected electrolyte-melt interface. Using the other cells, the concentration of oxygen at the electrolyte-melt interface is also monitored by measuring the open-circuit potentials developed between the melt and reference electrodes. Thus the electrochemical cells serve to both establish boundary conditions for the passive tracer and sense its path. Rayleigh-Benard convection was used to validate the electrochemical approach to flow visualization. Thus, a numerical characterization of the second critical Rayleigh numbers in liquid tin was conducted for a variety of Cartesian aspect ratios. The extremely low Prandtl number of tin represents the lowest value studied numerically. Additionally, flow field oscillations are visualized and the effect of tilt on convecting systems is quantified. Experimental studies of the effect of convection in liquid tin are presented. Three geometries are studied: (1) double electrochemical cell with vertical concentration gradients; (2) double cell with horizontal concentration gradients; and (3) multiple cells with vertical temperature gradients. The first critical Rayleigh number transition is detected with geometry (1) and it is concluded that current measurements are not as affected by convection as EMF measurements. The system is compared with numerical simulations in geometry (2), and oscillating convection is detected with geometry (3).

Crunkleton, D.↗
DOE OSTI2021

A critical review of molybdenum sequestration mechanisms under euxinic conditions: Implications for the precision of molybdenum paleoredox proxies

The observed difference in molybdenum (Mo) mobility and isotopic fractionation under oxic versus euxinic (i.e., anoxic and sulfidic) aqueous conditions provides a sound operational basis for the use of Mo geochemical signatures in ancient sedimentary records to infer palaeoceanographic redox conditions. While Mo is known to exist predominantly as molybdate (MoO 4 2– ) in oxic waters and convert into thiomolybdate species (MoO x S 4-x 2– ) under euxinic conditions, the pathways that lead to Mo sequestration are highly debated. As mechanistic understanding of Mo sequestration is crucial for accurately reconstructing the chemistry of ancient oceans and constraining the timing and intensity of oxygenation events through Earth's history using Mo paleoproxies, we have closely examined the current proposed mechanisms for Mo sequestration across a wide range of euxinic conditions. Through compilation and comparison of such information, we aim to provide an integrated view of Mo sequestration processes, to identify the current controversies as well as the roots of such controversies, and importantly, to propose avenues for future research. Here, sequestration of Mo may occur through complexation with organic matter (OM), reactions with oxyhydroxide and sulfide mineral surfaces, incorporation into iron sulfide crystal structures, formation of Mo-sulfide, and cellular assimilation. However, several major questions remains unresolved, including whether OM complexation plays a significant role in overall sedimentary Mo accumulation, whether the reduction of Mo(VI) occurs during interaction with Fe-S clusters/precipitates and/or with OM, whether microbial enzymatic reduction of Mo(VI) is important in Mo sequestration, whether synergistic effects exist between the biological and abiotic processes in Mo sequestration, and whether differences in reactivity among the various thiomolybdate intermediate species and tetrathiomolybdate influence the Mo sequestration process. At the end of the review, the reliability of Mo paleoproxies is discussed and reevaluated.

58 GEOSCIENCES↗
DOE OSTI2024

KOMPASS-II: Compaction of Crushed salt for Safe Containment – Phase 2

Long-term stable sealing elements are a basic component in the safety concept for a possible repository for heat-emitting radioactive waste in rock salt. The sealing elements will be part of the closure concept for drifts and shafts. They will be made from a welldefinied crushed salt in employ a specific manufacturing process. The use of crushed salt as geotechnical barrier as required by the German Site Selection Act from 2017 /STA 17/ represents a paradigm change in the safety function of crushed salt, since this material was formerly only considered as stabilizing backfill for the host rock. The demonstration of the long-term stability and impermeability of crushed salt is crucial for its use as a geotechnical barrier. The KOMPASS-II project, is a follow-up of the KOMPASS-I project and continues the work with focus on improving the understanding of the thermal-hydraulic-mechanical (THM) coupled processes in crushed salt compaction with the objective to enhance the scientific competence for using crushed salt for the long-term isolation of high-level nuclear waste within rock salt repositories. The project strives for an adequate characterization of the compaction process and the essential influencing parameters, as well as a robust and reliable long-term prognosis using validated constitutive models. For this purpose, experimental studies on long-term compaction tests are combined with microstructural investigations and numerical modeling. The long-term compaction tests in this project focused on the effect of mean stress, deviatoric stress and temperature on the compaction behavior of crushed salt. A laboratory benchmark was performed identifying a variability in compaction behavior. Microstructural investigations were executed with the objective to characterize the influence of pre-compaction procedure, humidity content and grain size/grain size distribution on the overall compaction process of crushed salt with respect to the deformation mechanisms. The created database was used for benchmark calculations aiming for improvement and optimization of a large number of constitutive models available for crushed salt. The models were calibrated, and the improvement process was made visible applying the virtual demonstrator.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Surface Ligand Effects on Energetics, Charge Transfer, and Stability at Interfaces Between Metal Halide Perovskites and Organic Semiconductors

Chemistry at organic-inorganic interfaces plays a major role in determining the performance of electronic and optoelectronic devices. Understanding, developing, and using surface chemistry is thus essential for creating improved and novel materials and devices. Organic metal halide perovskites (HPs) are inexpensive semiconductors that can be printed from solution to make efficient photovoltaic cells for harvesting solar energy, light emitting diodes for energy efficient solid-state lighting applications, solid-state lasers, and even spin selective devices with applications to quantum computing. To realize the potential of HPs, their surface chemistry and interfacial properties must be better understood and appropriately adjusted to meet the needs of the targeted application. For example, surface chemistry influences non-radiative recombination, which influences the efficiency of light emission and solar energy conversion, charge-carrier injection and extraction from optoelectronic devices, and material and device stability. This research project centered around determining how the surface chemistry of HP thin films and nanoparticles influences optical properties, charge transfer processes, energetics, and stability. In this project we characterized ligand binding strengths to HPs; determined how surface ligand chemistry influences photoluminescence properties, energetics, and charge transfer processes; determined that surface ligands often penetrate into HPs and uncovered methods of reducing surface ligand penetration through structural modifications; and discovered how interfacial energetics impact charge transfer processes and photovoltaic performance parameters. Overall, this research established important insights into how surface ligands interact with HPs to influence their optical properties, electronic properties, stability, and device level performance.

14 SOLAR ENERGY↗
DOE OSTI2025

Reduction of Pacific Double‐ITCZ Bias by Convection Parameterization in NCAR CESM2.2

Abstract The impact of convective closure on the double‐ITCZ bias in the NCAR CESM2.2 is investigated in this study. The standard CESM2.2 simulates a remarkable double‐ITCZ bias in the central and eastern Pacific, especially in boreal winter and spring. Modifications to the closure in convection parameterization scheme greatly reduce the double‐ITCZ bias in all seasons, demonstrating that convection parameterization can substantially influence the double‐ITCZ bias in CESM2.2. Further analyses suggest that convection parameterization can modulate the tropical atmosphere‐ocean feedback processes, through which it influences the SST in the southern ITCZ region and hence the double‐ITCZ bias. The changes in the upper ocean temperature advection induced by modified convective closure plays important roles in reducing the warm SST bias and double‐ITCZ precipitation bias in the southern ITCZ region. The modified convective closure improves the low‐level cloud and shortwave cloud radiative forcing in the southeastern Pacific. However, surface heat flux plays only a limited role in reducing warm SST bias and double ITCZ bias because the impacts of shortwave radiation changes are largely canceled by changes in longwave radiation and latent heat flux.

Song, Xiaoliang [Scripps Institution of Oceanograp↗
DOE OSTI2020

Stimulation of soil respiration by elevated CO 2 is enhanced under nitrogen limitation in a decade-long grassland study

Whether and how CO 2 and nitrogen (N) availability interact to influence carbon (C) cycling processes such as soil respiration remains a question of considerable uncertainty in projecting future C–climate feedbacks, which are strongly influenced by multiple global change drivers, including elevated atmospheric CO 2 concentrations (eCO 2 ) and increased N deposition. However, because decades of research on the responses of ecosystems to eCO 2 and N enrichment have been done largely independently, their interactive effects on soil respiratory CO 2 efflux remain unresolved. Here, we show that in a multifactor free-air CO 2 enrichment experiment, BioCON (Biodiversity, CO 2 , and N deposition) in Minnesota, the positive response of soil respiration to eCO 2 gradually strengthened at ambient (low) N supply but not enriched (high) N supply for the 12-y experimental period from 1998 to 2009. In contrast to earlier years, eCO 2 stimulated soil respiration twice as much at low than at high N supply from 2006 to 2009. In parallel, microbial C degradation genes were significantly boosted by eCO 2 at low but not high N supply. Further, incorporating those functional genes into a coupled C–N ecosystem model reduced model parameter uncertainty and improved the projections of the effects of different CO 2 and N levels on soil respiration. If our observed results generalize to other ecosystems, they imply widely positive effects of eCO 2 on soil respiration even in infertile systems.

54 ENVIRONMENTAL SCIENCES↗