Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “potential energy surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Zeta potential measurements of SiO 2 and TiO 2 particles in anionic and cationic surfactant solutions

Zeta potential measurements can provide valuable insights into colloidal stability and may reflect changes in the electrochemical double layer that influence electrocatalysis. In this study, we used zeta potential measurements to monitor and investigate the adsorption behavior of anionic sodium dodecyl sulfate (SDS), cationic dodecyl trimethyl ammonium bromide (DTAB), and cationic cetyl trimethyl ammonium bromide (CTAB) surfactants on SiO 2 and TiO 2 particles in DI water. The zeta potentials of SiO 2 and TiO 2 particles were measured as a function of particle concentration in 1.0 mM, 5.0 mM, and 10.0 mM surfactant solutions. Results indicate that there is no significant adsorption of DS - ions on SiO 2 particles across all SDS concentrations investigated in this study. The zeta potential of TiO 2 particles shifts from negative to positive as particle concentration increases at 1.0 mM SDS, indicating a decrease in DS - ions adsorption per TiO 2 particle. Adsorption plateaus at 5.0 mM SDS for all TiO 2 concentrations studied. In contrast, DTA + and CTA + ions showed clear adsorption on SiO 2 particles, but DTA + exhibited no apparent adsorption on TiO 2 particles. Interestingly, CTA + adsorption on TiO 2 was only evident at higher surfactant concentrations. This study presents a systematic investigation of zeta potential behavior as a function of particle and surfactant concentration, highlighting adsorption saturation and electrostatic reversal. Unlike prior work that was limited to single particle concentration measurements, our approach reveals how surfactant adsorption per particle decreases with increasing surface area. Despite the structural similarity between DTAB and CTAB, this study captured the different adsorption behaviors of both surfactants on SiO 2 and TiO 2 , emphasizing the role of the overall structure of the surfactant on surfactant adsorption behavior. These insights refine the interpretation of zeta potential data and advance understanding of surfactant adsorption on oxide particles. The insight provided in this study about surfactant adsorption on SiO 2 and TiO 2 particles could have important implications for the design of more effective colloidal and catalytic systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Spontaneous Cyclogenesis without Radiative and Surface-Flux Feedbacks

Tropical cyclones (TCs) are among the most intense and feared storms in the world. What physical processes lead to cyclogenesis remains the most mysterious aspect of TC physics. Here, we study spontaneous TC genesis in rotating radiative–convective equilibrium using cloud-resolving simulations over an f plane with constant sea surface temperature. Previous studies proposed that spontaneous TC genesis requires either radiative or surface-flux feedbacks. To test this hypothesis, we perform mechanism-denial experiments, in which we switch off both feedback processes in numerical simulations. We find that TCs can self-emerge even without radiative and surface-flux feedbacks. Although these feedbacks accelerate the genesis and impact the size of the TCs, TCs in the experiments without them can reach similar intensities as those in the control experiment. We show that TC genesis is associated with an increase in the available potential energy (APE) and that convective heating dominates the APE production. Overall, our result suggests that spontaneous TC genesis may result from a cooperative interaction between convection and circulation and that radiative and surface-flux feedbacks accelerate the process. Furthermore, we find that increasing the planetary rotation favors spontaneous TC genesis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

From material properties to multiscale modeling to improve lithium-ion energy storage safety

Energy storage using lithium-ion cells dominates consumer electronics and is rapidly becoming predominant in electric vehicles and grid-scale energy storage, but the high energy densities attained lead to the potential for release of this stored chemical energy. This article introduces some of the paths by which this energy might be unintentionally released, relating cell material properties to the physical processes associated with this potential release. The selected paths focus on the anode–electrolyte and cathode–electrolyte interactions that are of typical concern for current and near-future systems. Relevant material processes include bulk phase transformations, bulk diffusion, surface reactions, transport limitations across insulating passivation layers, and the potential for more complex material structures to enhance safety. We also discuss the development, parameterization, and application of predictive models for this energy release and give examples of the application of these models to gain further insight into the development of safer energy storage systems.

25 ENERGY STORAGE↗
DOE OSTI2022

The theory of transport in helical spin-structure crystals

Abstract We study helical structures in spin-spiral single crystals. In the continuum approach for the helicity potential energy the simple electronic band splits into two non-parabolic bands. For low exchange integrals, the lower band is described by a surface with a saddle shape in the direction of the helicity axis. Using the Boltzmann equation with the relaxation due to acoustic phonons, we discover the dependence of the current on the angle between the electric field and helicity axis leading to the both parallel and perpendicular to the electric field components in the electroconductivity. The latter can be interpreted as a planar Hall effect. In addition, we find that the transition rates depend on an electron spin allowing the transition between the bands. The electric conductivities exhibit nonlinear behaviors with respect to chemical potential µ . We explain this effect as the interference of the band anisotropy, spin conservation, and interband transitions. The proposed theory with the spherical model in the effective mass approximation for conduction electrons can elucidate nonlinear dependencies that can be identified in experiments. We find the excellent agreement between the theoretical and experimental data for parallel resistivity depending on temperature at the phase transition from helical to ferromagnetic state in a M n P single crystal. In addition, we predict that the perpendicular resistivity abruptly drops to zero in the ferromagnetic phase.

Physics↗
DOE OSTI2021

Stability and mobility of tungsten clusters on tungsten (110) surface: Ab initio and atomistic simulations

Quantifying the surface transport properties of tungsten (W) is of prime importance to understand the formation of nano-fuzz in fusion plasma-facing conditions. The stability and mobility of W adatom clusters (W n , n = 2-9) on the W(110) surface has been investigated by computer simulations, including ab initio calculations using density functional theory (DFT) and molecular statics (MS) simulations with multiple W interatomic potentials. The DFT results demonstrate that the sequential binding energy generally increases with number of W adatoms, except for the 5 th and 7 th W adatoms. The most common elemental migration steps of W n (n>2) clusters are observed to consist of monomer and dimer hops, while larger W n clusters can also diffuse by dissociation and recombination of smaller clusters. The threshold migration energy of W 9 is the highest, then followed by W 8 , W 4 , and W 6 , while W 3 , W 5 , and W 7 have similar migration energies. Compared to DFT, each interatomic potential evaluated overestimates the binding energies of W n clusters. Additionally, the embedded-atom potential developed by Juslin and Wirth adequately predicts the threshold migration energy of W n (n>2) clusters, although it predicts different underlying migration mechanisms. The results show that interaction mechanism between W adatoms controls the stability and mobility of W n clusters on the W(110) surface.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Relative Contributions of Surface Parcel and Atmospheric Environment to Convective Potential during Interstorm Periods

Convective instability is affected by both surface heat fluxes into near-surface air parcels and the atmospheric profile encountered as these air parcels are lifted aloft. In this study, we investigate the evolution of buoyancy experienced by surface-based parcels, taking interstorm soil moisture drydowns as fundamental time periods. We use profile observations of atmospheric temperature and humidity from ground-based passive remote sensing and in situ observations available at the U.S. Department of Energy Atmospheric Radiation Measurement Southern Great Plains site in Oklahoma, United States, and examine drydown events during the warm seasons from 2017 to 2022. Results reveal new insights on the emergence and growth of convective available potential energy (CAPE) during drydowns. We observe that the peak convective potential appears in the afternoon and grows in the midtroposphere (68% of 66 drydown events), with the largest CAPE values toward the end of the drydown event. We also find that the near-surface parcel contributes more to the evolution of CAPE than the atmospheric environment (86% of drydown events). These findings highlight the importance of surface heat fluxes and moisture availability from surface-based parcels in modulating the evolution of atmospheric conditions favorable for convection, underscoring the interplay between surface processes and atmospheric dynamics in driving convective instability.

Atmosphere-land interaction↗
DOE OSTI2020

Quasi-equilibrium predictions of water desorption kinetics from rapidly-heated metal oxide surfaces

Controlling sub-microsecond desorption of water and other impurities from electrode surfaces at high heating rates is crucial for pulsed power applications. Despite the short time scales involved, quasi-equilibrium ideas based on transition state theory (TST) and Arrhenius temperature dependence have been widely applied to fit desorption activation free energies. Here, we apply molecular dynamics (MD) simulations in conjunction with equilibrium potential-of-mean-force (PMF) techniques to directly compute the activation free energies (ΔG*) associated with desorption of intact water molecules from Fe 2 O 3 and Cr 2 O 3 (0001) surfaces. The desorption free energy profiles are diffuse, without maxima, and have substantial dependences on temperature and surface water coverage. Incorporating the predicted ΔG* into an analytical form gives rate equations that are in reasonable agreement with non-equilibrium molecular dynamics desorption simulations. We also show that different ΔG* analytical functional forms which give similar predictions at a particular heating rate can yield desorption times that differ by up to a factor of four or more when the ramp rate is extrapolated by 8 orders of magnitude. This highlights the importance of constructing a physically-motivated ΔG* functional form to predict fast desorption kinetics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Gel-Derived Amorphous Bismuth–Nickel Alloy Promotes Electrocatalytic Nitrogen Fixation via Optimizing Nitrogen Adsorption and Activation

To achieve the electrochemical nitrogen reduction reaction (NRR) for efficient and sustainable NH 3 production, catalysts should exhibit high selectivity and activity with optimal adsorption energy. Herein we developed a three-dimensional (3D) amorphous BiNi alloy toward a significantly enhanced NRR compared with its crystalline and metal counterparts. Ni alloying enables the chemisorption of nitrogen and the lower fre-energy change for the *NNH formation, and the 3D alloy electrocatalyst exhibits high catalytic activity for NH 3 production with a yield rate of 17.5 μg h -1 mg cat -1 and Faradaic efficiency of 13.8 %. The enhanced electron transfer and increased electrochemical surface area were revealed in the interconnected porous scaffold, affording it sufficiently efficient and stable activity for potential practical applications. Furthermore, this work offers new insights into optimizing the adsorption energy of reactants and intermediates combined with tuning the crystallinity of NRR electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Oxidative Grafting for Catalyst Synthesis in Surface Organometallic Chemistry

The development of new methods of catalyst synthesis with the potential to generate active site structures orthogonal to those accessible by traditional protocols is of great importance for discovering new materials for addressing challenges in the evolving energy and chemical economy. Here, in this work, the generality of oxidative grafting of organometallic and well-defined molecular metal precursors onto redox-active surfaces such as manganese dioxide (MnO 2 ) and lithium manganese oxide (LiMn 2 O 4 ) is investigated. Nine molecular metal precursors are explored, spanning groups 4–11 and each of the three periods of the transition metal series. The byproducts of the oxidative grafting reaction, a mixture of protodemetalation and ligand homocoupling for several organometallic precursors, was found to provide insights into the mechanism of the grafting reaction, suggesting oxidation of both the metal d-orbitals, as well as the metal–carbon σ-bonds, resulting in ejection of the ligand radical fragment. Analysis of the supported structures and oxidation state by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) suggests that several of the chemisorbed metal ions are intercalated into interstitial vacancies of the surface structure while other complexes form intact molecular fragments on the surface. Proof of concept for the use of this metalation protocol to generate diverse, metal-dependent catalytic performance is demonstrated by the application of these materials in the conversion of cyclohexane to K/A oil (cyclohexanol and cyclohexanone) with tert-butyl hydroperoxide, as well as in the low-temperature (T ≤ 50 °C) oxidation of carbon monoxide to carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Single‐Step Recovery of Water from Stable Crude Oil‐Water Emulsion Using Surface Engineered Hybrid Inorganic‐Polymer Membranes

ABSTRACT Separating crude oil from water remains one of the most stubborn challenges in environmental remediation, especially for surfactant‐stabilized emulsions that resist conventional demulsification methods. Here, we report a scalable strategy for achieving near‐zero‐discharge separation of crude oil emulsions using a single superhydrophilic membrane. By applying low‐temperature atomic layer deposition (ALD) of various metal oxides onto activated polyvinylidene fluoride (PVDF) membranes, we create atomically precise surface‐engineered (SE) membranes that maintain an exceptionally strong hydration layer at the membrane‐feed interface, even at high oil loadings. Among the various metal oxides, TiO 2 ‐modified SE membranes exhibit superior interfacial water stability, enabling sustained dewatering of complex crude oil‐water emulsions with >98% separation efficiency and >97% water recovery, compared to only 24.6% water recovery for the pristine membrane. This separation performance surpasses conventional hydrophilic membranes and is comparable to complex Janus channel membrane systems, demonstrating near‐complete emulsion separation using a single membrane. This low‐temperature membrane surface engineering process with atomic‐level precision and potential for scalability via roll‐to‐roll fabrication is promising for industrial‐scale, energy‐efficient water treatment and oil spill remediation applications.

Sengupta, Bratin [Applied Materials Division Argon↗
DOE OSTI2021

Self-Stabilized LiNi 0.8 Mn 0.1 Co 0.1 O 2 in thiophosphate-based all-solid-state batteries through extra LiOH

Nickle-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode material exhibits engaging properties in high energy density and low cost, making it great potential for the next generation high-energy all-solid-state lithium batteries (ASSLBs). However, NMC 811 suffers from severe surface electrochemical, chemical, and voltage incompatibility towards solid-state electrolytes (SSE), especially thiophosphate-based electrolytes like Li 6 PS 5 Cl. Although diverse coating methods have been made to overcome this issue, they are typically cumbersome and expensive. A coating strategy that satisfied all the requirements of cost-efficiency, stability, uniformity, scalability, and easy-achieving is still challenging. Here, we developed a LiOH-based surface stabilization strategy that provides a ~10 nm stable permeable layer on NMC 811. After one-step sintering of NMC 811 precursor mixed with LiOH, which is commonly used for NMC 811 lithiation process, excessive LiOH simultaneously distributes on NMC 811 particles. Unlike other reported methods, this coating method can be easily controlled and fabricated without additional complicated processes. By simply controlling the thickness of LiOH layer, which protects the Li 6 PS 5 Cl solid electrolyte materials from being oxidized, optimized cycling stability can be obtained for 600 cycles with capacity of 130 mAh g – 1 on average at a wide electrochemical window of 2.50–4.20 V (vs. Li-In).

25 ENERGY STORAGE↗
DOE OSTI2022

Breaking $\mathrm{OER}$ and $\mathrm{CER}$ scaling relations via strain and its relaxation in $\mathrm{RuO}$ 2 (101)

Green hydrogen production from abundant water sources is an important component of renewable energy storage. Water oxidation catalysts are typically considered bound by adsorbate scaling relations, limiting their activity for the oxygen evolution reaction (OER) as well as selectivity between OER and the chlorine evolution reaction (CER) that compete in saline water streams. RuO 2 is highly active for both reactions, and recent measurements have shown the OER activity is greater on undercoordinated, high index facets compared to the lowest-energy (110) facet often studied. The growth of such orientations as epitaxial films, however, can result in appreciable strain and potential surface faceting via its relaxation. Here, we find the activity and selectivity towards OER and CER vary with thickness in epitaxial (101) RuO 2 thin films: OER activity decreases 4x as film thickness increases from 8 nm to 48 nm, while CER activity is comparable. Thus, strain and its relaxation can be used to break scaling relationships between OER and CER, highlighting the important role that defects play in selective oxidation processes on RuO 2 in chloride-containing media.

36 MATERIALS SCIENCE↗
DOE OSTI2026

ALD with Alternative Coreactants: Which Work, Which Do Not, and Why

In this paper, we present a combined experimental and theoretical study that systematically evaluates a series of alcohols (i.e., primary, secondary, and tertiary) as coreactants for trimethylaluminum (TMA)-based atomic layer deposition (ALD) of Al 2 O 3 . We employed in situ quartz crystal microbalance techniques and ex situ X-ray photoelectron spectroscopy to probe growth across a range of temperatures from T = 120 to 285 °C. Dispersion-inclusive hybrid density functional theory was employed to identify potential reaction pathways and compute corresponding Gibbs free-energy barriers and rate coefficients. Experimentally on an Al 2 O 3 surface, sustained thin-film growth, where the rate is constant over many cycles, was only observed with tertiary alcohols (tert-butanol and 2-methyl-2-butanol) at elevated temperatures (e.g., T = 285 °C); for tert-butanol specifically, sustained growth also occurred at T = 240 °C, with no sustained growth at or below T = 210 °C. Growth using primary and secondary alcohols decayed to a negligible value after only 2–3 cycles on an Al 2 O 3 surface at all tested temperatures. Intentional trace additions of H 2 O to anhydrous alcohols restored sustained growth but at reduced deposition rates relative to pure H 2 O. Theoretical analysis supports a bimolecular alkoxy β-H elimination mechanism as the primary reaction pathway: initiated by the formation of a bound alkoxy species, the subsequent β-H elimination step is rate-determining, with a barrier that systematically decreases as the degree of the alcohol coreactant is increased from primary to secondary to tertiary. Computed rate coefficients (k) also indicate a strong temperature dependence (with k increasing by ∼4–5 orders of magnitude from T = 120 to 285 °C) and are consistent with the experimental observation that only tertiary alcohols lead to steady thin-film growth at elevated temperatures. This integrated approach establishes why only certain alcohols can sustain Al 2 O 3 ALD and delivers a predictive framework for identifying effective alcohol coreactants.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Review of High-Throughput Surface Treatments for Microlens Arrays

Microlenses are increasingly being integrated into modern manufactured devices. From printed security devices and screens to solar panels and microscopes, these optical materials offer high control over light focusing. Thus, understanding how to treat the surfaces of these fragile, transparent devices on an integrated manufacturing line is essential. Here, in this study, we review the surface treatments for the following application categories: cleaning, increasing surface energy, decreasing surface energy, and tunable surface modifications. This overview describes methods available for the large-scale manufacturing of microlens arrays and the potential impact of those treatments on common optical surfaces. Objectives and qualitative compatibility parameters are compared, and outlooks are provided for further study to aid in streamlining the method selection and process optimization for microlenses and similar optical components.

lens manufacturing↗
DOE OSTI2022

Convective Parameters Derived from Radiosonde Data (SONDEPARAM) Value-Added Product Report

Radiosondes provide fundamental observations of the vertical profile of atmospheric state (pressure, temperature, humidity, and winds), with important implications for subsequent studies on environmental controls on cloud conditions. Within convective cloud environments, there is an increasing demand for additional value-added products (VAPs) to facilitate the use of U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility radiosonde data sets. Such VAPs should provide quick and reliable estimates for several standard radiosonde parameters or quantities of interest using common assumptions, as well as open, flexible code for visualization and user interaction. The Convective Parameters Derived from Radiosonde Data (SONDEPARAM) VAP will apply several robust algorithms used in Wang et al. (2020) for the calculation of useful radiosonde convective cloud parameters, including the convective available potential energy (CAPE), convective inhibition (CIN), and other convective parameters, for several different assumptions regarding the initial parcel characteristics (i.e., surface-based, most unstable, mixed layer). These ARM VAP codes are developed in open, flexible Python formats, with the intention that these parameters/calculations will be incorporated into traditional ARM quick-look radiosonde plotting, yet associated with user-available codes for ease in user reproduction and assumption modification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

C-C Coupling Mechanism on Cu(100) A Molecular Dynamics Study at 298K

The electrochemical reduction of carbon dioxide (CO2) into valuable fuels such as C1 (syngas, methane) and C2 (ethylene, ethanol) products is a key strategy for achieving a carbon-neutral economy. Computational studies of C-C coupling, a critical step in CO2 reduction, are essential for designing more efficient catalysts. However, simulating these processes under realistic electrochemical conditions, including temperature and solvent effects, is computationally demanding. In this work, we develop a machine learning-based atomistic potential to study CO2 reduction on Cu(100) surfaces, accounting for temperature and explicit water solvent effects. We compute thermodynamic free energies of the possible C-C coupling pathways, CO*+CO*→OCCO*, CO*+CHO*→OCCHO*, CO*+COH*→OCCOH*, CHO*+COH*→OHCCOH*, COH*-COH*→HOCCOH*, and CHO*-CHO*→OHCCHO*. Our results quantify the thermodynamic tendencies of these reactions and reveal that, in addition to the well-established CO* + CO* → OCCO* pathway, CHO* is a critical intermediate in the formation of C2 products on Cu(100). Furthermore, we demonstrate that the machine learning approach offers a cost-efficient framework for studying CO2 reduction on diverse catalysts under realistic electrochemical conditions.

machine learning↗
DOE OSTI2025

PtCoO 2 for Scaled Interconnects

Copper (Cu) interconnects are an increasingly important bottleneck in integrated circuits due to energy consumption and latency caused by the notable increase in Cu resistivity as dimensions decrease, primarily due to electron scattering at surfaces. Herein, the potential of a directional conductor, PtCoO 2 , which has a low bulk resistivity and a distinctive anisotropic structure that mitigates electron surface scattering is showcased. Thin films of PtCoO 2 of various thicknesses are synthesized by molecular beam epitaxy (MBE) coupled with a postdeposition annealing process and the superior quality of PtCoO 2 films is demonstrated by multiple characterization techniques. The thickness‐dependent resistivity curve illustrates that PtCoO 2 significantly outperforms effective Cu (Cu with TaN barriers) and Ru in resistivity below 20.0 nm with a more than 6x reduction compared to effective Cu below 6.0 nm, having a value of only 6.32 μΩ cm at 3.3 nm. It is determined that grain boundary scattering can still be improved for even lower resistivities in this material system through a combination of experiments and theoretical simulations. PtCoO 2 is therefore a highly promising alternative material for future interconnect technologies promising lower resistivities, better stability, and significant improvements in energy efficiency and latency for advanced integrated circuits.

Li, Yansong [Department of Electrical Engineering ↗
DOE OSTI2024

Multinonmetal-Doped V 2 O 5 Nanocomposites for Lithium-Ion Battery Cathodes

Lithium-ion batteries (LIBs) are critical for portable electronics and electric vehicles, demanding higher energy density to meet increasing energy storage needs. Current commercial cathode materials, such as LiFePO 4 and LiCoO 2 , are limited by a single electron transfer, restricting their energy density. Vanadium pentoxide (V 2 O 5 ) emerges as a promising high-capacity cathode due to its high theoretical capacity of 443 mA h g –1 with three Li storage capacities, significantly surpassing conventional materials. However, the practical application of V 2 O 5 is hindered by a large structural evolution and rapid capacity fading during full lithium intercalation. Here, this study introduces a multinonmetal doping (MNM) strategy to enhance V 2 O 5 cathodes by incorporating all-nonmetal dopants (B, P, and Si) and graphene (G). MNM-V 2 O 5 -G exhibits increased surface oxygen defects, improving charge transfer kinetics and thus enhancing the rate performance and cycling stability. Our results provide valuable insights into the role of surface oxygen defects in stabilizing V 2 O 5 with element doping. This research highlights the potential of multinonmetal doping to improve LIB cathode materials, offering a promising pathway for design of high-energy-density V 2 O 5 cathodes and advancing the development of next-generation energy storage solutions.

25 ENERGY STORAGE↗