Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pillar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39

Origin and control of magnetic exchange coupling in between focused electron beam deposited cobalt nanostructures

We demonstrate the existence and control of inter-particle magnetic exchange coupling in densely packed nanostructures fabricated by focused electron beam induced deposition. With Xe beam post-processing, we have achieved the controlled reduction and eventual elimination of the parasitic halo-like cobalt deposits formed in the proximity of intended nanostructures, which are the identified source of the magnetic exchange coupling. The elimination of the halo-mediated exchange coupling is demonstrated by magnetic measurements using Kerr microscopy on Co pillar arrays. Electron microscopy studies allowed us to identify the mechanisms underlying this process and to verify the efficiency and opportunities of the described nano-scale fabrication approach.

36 MATERIALS SCIENCE↗

Grating-coupled mid-infrared light emission from tensilely strained germanium nanomembranes

Mechanically stressed nanomembranes are used to demonstrate mid-infrared interband light emission from Ge within the 2.1–2.5 μm atmospheric transmission window. Large biaxial tensile strain is introduced in these samples to convert Ge into a (near-) direct-bandgap semiconductor and to red-shift its luminescence. A diffractive array of Ge pillars is used to outcouple the long-wavelength interband radiation, which is otherwise primarily emitted in the sample plane. An order-of-magnitude strain-induced enhancement in radiative efficiency is also reported, together with the observation of luminescence signatures associated with photonic-crystal cavity modes. These results are promising for the development of silicon-compatible lasers for mid-infrared optoelectronics applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part.

36 MATERIALS SCIENCE↗

Experimental and numerical investigations on tailored tempering process of a U-channel component with tailored mechanical properties

Hot stamping of quenchenable ultra high strength steels currently represents a promising forming technology for the manufacturing of safety and crash relevant parts. For some applications, such as B-pillars and other structural components that may undergo impact loading, it may be desirable to create regions of the part with tailored mechanical properties. In the paper, a laboratory-scale hot stamped U-channel was manufactured by using a segmented die, which was heated by cartridge heaters and cooled by water channels independently. Local hardness values as low as 289 HV can be achieved using a heated die temperature of 400°C while maintaining a hardness level of 490 HV in the fully cooled region. If the die temperature was increased to 450°C, the Vickers hardness of elements in the heated region was 227 HV, with a reduction in hardness of more than 50%. Optical microscopy was used to verify the microstructure of the as-quenched phases with respect to the heated die temperatures. The FE model of the lab-scale process was developed to capture the overall hardness trends that were observed in the experiments.

36 MATERIALS SCIENCE↗

Monolithic integration of optical grade GaAs on Si (001) substrates deeply patterned at a micron scale

Dense arrays of micrometric crystals, with areal filling up to 93%, are obtained by depositing GaAs in a mask-less molecular beam epitaxy process onto Si substrates. The substrates are patterned into tall, micron sized pillars. Faceted high aspect ratio GaAs crystals are achieved by tuning the Ga adatom for short surface diffusion lengths. The crystals exhibit bulk-like optical quality due to defect termination at the sidewalls. Simultaneously, the thermal strain induced by different thermal expansion parameters of GaAs and Si is fully relieved. This opens the route to thick film applications without crack formation and wafer bowing.

36 MATERIALS SCIENCE↗

Long-term superelastic cycling at nano-scale in Cu-Al-Ni shape memory alloy micropillars

Superelastic behavior at nano-scale has been studied along cycling in Cu-Al-Ni shape memory alloy micropillars. Arrays of square micropillars were produced by focused ion beam milling, on slides of [001] oriented Cu-Al-Ni single crystals. Superelastic behavior of micropillars, due to the stress-induced martensitic transformation, has been studied by nano-compression tests during thousand cycles, and its evolution has been followed along cycling. Each pillar has undergone more than thousand cycles without any detrimental evolution. Moreover, we demonstrate that after thousand cycles they exhibit a perfectly reproducible and completely recoverable superelastic behavior.

36 MATERIALS SCIENCE↗

Full wave simulation of waves in ECRIS plasmas based on the finite element method

This paper describes the modeling and the full wave numerical simulation of electromagnetic waves propagation and absorption in an anisotropic magnetized plasma filling the resonant cavity of an electron cyclotron resonance ion source (ECRIS). The model assumes inhomogeneous, dispersive and tensorial constitutive relations. Maxwell's equations are solved by the finite element method (FEM), using the COMSOL Multiphysics{sup ®} suite. All the relevant details have been considered in the model, including the non uniform external magnetostatic field used for plasma confinement, the local electron density profile resulting in the full-3D non uniform magnetized plasma complex dielectric tensor. The more accurate plasma simulations clearly show the importance of cavity effect on wave propagation and the effects of a resonant surface. These studies are the pillars for an improved ECRIS plasma modeling, that is mandatory to optimize the ion source output (beam intensity distribution and charge state, especially). Any new project concerning the advanced ECRIS design will take benefit by an adequate modeling of self-consistent wave absorption simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dielectrophoretic bending of directly printed free-standing ultra-soft nanowires

Electrohydrodynamic printing has shown superior resolution compared to conventional ink-jet printing, but the use of electrically charged liquid commonly leads to unwanted repulsion effects posing a threshold to resolution capabilities. However, a recently demonstrated controlled dripping process of nanoscale, particle-laden droplets, could circumvent such resolution obstacles even on insulating substrates. Here, we show that so-printed free-standing nanostructures can be autonomously deformed, and mechanically characterized due to the presence of the electrified nozzle, or, after voltage termination, due to transient charge residuals on the structures themselves. Dielectrophoretic forces, arising between two subsequently printed nanopillars lead to their contactless bending and to the formation of out-of-plane arc structures arising from the connection of the pillar apexes. Once connected, the ultra-soft nanopillars are found to be tightly merged and could, for example, serve in electronics as out of plane nanobonds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Numerically optimized structures for dielectric asymmetric dual-grating laser accelerators

Optical scale dielectric structures are promising candidates to realize future compact, low cost particle accelerators, since they can sustain high acceleration gradients in the range of GeV/m. Here, we present numerical simulation results for a dielectric asymmetric dual-grating accelerator. It was found that the asymmetric dual-grating structures can efficiently modify the laser field to synchronize it with relativistic electrons, therefore increasing the average acceleration gradient by ∼10% in comparison to symmetric structures. The optimum pillar height which was determined by simulation agrees well with that estimated analytically. The effect of the initial kinetic energy of injected electrons on the acceleration gradient is also discussed. Finally, the required laser parameters were calculated analytically and a suitable laser is proposed as energy source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimization of the optical properties of nanostructured silicon surfaces for solar cell applications

Surface nanostructuration is an important challenge for the optimization of light trapping in solar cell. We present simulations on both the optical properties and the efficiency of micro pillars—MPs—or nanocones—NCs—silicon based solar cells together with measurements on their associated optical absorption. We address the simulation using the Finite Difference Time Domain method, well-adapted to deal with a periodic set of nanostructures. We study the effect of the period, the bottom diameter, the top diameter, and the height of the MPs or NCs on the efficiency, assuming that one absorbed photon induces one exciton. This allows us to give a kind of abacus involving all the geometrical parameters of the nanostructured surface with regard to the efficiency of the associated solar cell. We also show that for a given ratio of the diameter over the period, the best efficiency is obtained for small diameters. For small lengths, MPs are extended to NCs by changing the angle between the bottom surface and the vertical face of the MPs. The best efficiency is obtained for an angle of the order of 70°. Finally, nanostructures have been processed and allow comparing experimental results with simulations. In every case, a good agreement is found.

30 DIRECT ENERGY CONVERSION↗

Primordial nucleosynthesis: A cosmological point of view

Primordial nucleosynthesis remains as one of the pillars of modern cosmology. It is the test-ing ground upon which all cosmological models must ultimately rest. It is our only probe of the universe during the first few minutes of cosmic expansion and in particular during the important radiation-dominated epoch. These lectures review the basic equations of space-time, cosmology, and big bang nucleosynthesis. We will then review the current state of observational constraints on primordial abundances along with the key nuclear reactions and their uncertainties. We summarize which nuclear measure-ments are most crucial during the big bang. We also review various cosmological models and their constraints. In particular, we summarize the constraints that big bang nucleosynthesis places upon the possible time variation of fundamental constants, along with constraints on the nature and origin of dark matter and dark energy, long-lived supersymmetric particles, gravity waves, and the primordial magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

Interfacial electronic transport phenomena in single crystalline Fe-MgO-Fe thin barrier junctions

Spin filtering effects in nano-pillars of Fe-MgO-Fe single crystalline magnetic tunnel junctions are explored with two different sample architectures and thin MgO barriers (thickness: 3–8 monolayers). The two architectures, with different growth and annealing conditions of the bottom electrode, allow tuning the quality of the bottom Fe/MgO interface. As a result, an interfacial resonance states (IRS) is observed or not depending on this interface quality. The IRS contribution, observed by spin polarized tunnel spectroscopy, is analyzed as a function of the MgO barrier thickness. Our experimental findings agree with theoretical predictions concerning the symmetry of the low energy (0.2 eV) interfacial resonance states: a mixture of Δ{sub 1}-like and Δ{sub 5}-like symmetries.

36 MATERIALS SCIENCE↗

Donor bound excitons in ZnSe nanoresonators - Applications in quantum information science

Here we summarize the advantages of excitons bound to isolated fluorine donor in ZnSe/ZnMgSe quantum well nano-structures. Devices based on these semiconductors, are particularly suited to implement concepts of the optical manipulation of quantum states in solid-state material. The fluorine donor in ZnSe provides a physical qubit with potential advantages over previously researched qubits. In this context we show several initial demonstrations of devices, such as a low-threshold microdisk laser and an indistinguishable single photon source. Additionally we demonstrate the realization of a controllable three-level-system qubit consisting of a single Fluorine donor in a ZnSe nano-pillar, which provides an optical accessible single electon spin qubit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cosmological and supernova neutrinos

The Big Bang nucleosynthesis (BBN) and the cosmic microwave background (CMB) anisotropies are the pillars of modern cosmology. It has recently been suggested that axion which is a dark matter candidate in the framework of the standard model could condensate in the early universe and induce photon cooling before the epoch of the photon last scattering. Although this may render a solution to the overproduction problem of primordial {sup 7}Li abundance, there arises another serious difficulty of overproducing D abundance. We propose a hybrid dark matter model with both axions and relic supersymmetric (SUSY) particles to solve both overproduction problems of the primordial D and {sup 7}Li abundances simultaneously. The BBN also serves to constrain the nature of neutrinos. Considering non-thermal photons produced in the decay of the heavy sterile neutrinos due to the magnetic moment, we explore the cosmological constraint on the strength of neutrino magnetic moment consistent with the observed light element abundances. Core-collapse supernovae eject huge flux of energetic neutrinos which affect explosive nucleosynthesis of rare isotopes like {sup 7}Li, {sup 11}B, {sup 92}Nb, {sup 138}La and {sup 180}Ta and r-process elements. Several isotopes depend strongly on the neutrino flavor oscillation due to the Mikheyev-Smirnov-Wolfenstein (MSW) effect. Combining the recent experimental constraints on θ{sub 13} with predicted and observed supernova-produced abundance ratio {sup 11}B/{sup 7}Li encapsulated in the presolar grains from the Murchison meteorite, we show a marginal preference for an inverted neutrino mass hierarchy. We also discuss supernova relic neutrinos (SRN) that may indicate the softness of the equation of state (EoS) of nuclear matter and adiabatic conditions of the neutrino oscillation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of enhanced visible and infrared emissions in photonic crystal thin-film light-emitting diodes

Photonic crystals, in the form of closed-packed nano-pillar arrays patterned by nanosphere lithography, have been formed on the n-faces of InGaN thin-film vertical light-emitting diodes (LEDs). Through laser lift-off of the sapphire substrate, the thin-film LEDs conduct vertically with reduced dynamic resistances, as well as reduced thermal resistances. The photonic crystal plays a role in enhancing light extraction, not only at visible wavelengths but also at infrared wavelengths boosting heat radiation at high currents, so that heat-induced effects on internal quantum efficiencies are minimized. The observations are consistent with predictions from finite-difference time-domain simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Differential ultrafast all-optical switching of the resonances of a micropillar cavity

We perform frequency- and time-resolved all-optical switching of a GaAs-AlAs micropillar cavity using an ultrafast pump-probe setup. The switching is achieved by two-photon excitation of free carriers. We track the cavity resonances in time with a high frequency resolution. The pillar modes exhibit simultaneous frequency shifts, albeit with markedly different maximum switching amplitudes and relaxation dynamics. These differences stem from the non-uniformity of the free carrier density in the micropillar, and are well understood by taking into account the spatial distribution of injected free carriers, their spatial diffusion and surface recombination at micropillar sidewalls.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain and morphology of graphene membranes on responsive microhydrogel patterns

We study the configuration of atomically-thin graphene membranes on tunable microhydrogel patterns. The polyethylene oxide microhydrogel structures patterned by electron-beam lithography show increase in height, with a persistent swelling ratio up to ∼10, upon exposure to vapors of an organic solvent. We demonstrate that modifying the height fluctuations of the microhydrogel affects the strain and morphology of ultrathin graphene membrane over-layer. Raman spectroscopic investigations indicate that small lattice strains can be switched on in mechanically exfoliated few-layer graphene membranes that span these microhydrogel structures. In case of chemical-vapor deposited single-layer graphene, we observe Raman signatures of local depinning of the membranes upon swelling of microhydrogel pillars. We attribute this depinning transition to the competition between membrane-substrate adhesion energy and membrane strain energy, where the latter is tuned by hydrogel swelling.

36 MATERIALS SCIENCE↗

Self-propelled sweeping removal of dropwise condensate

Dropwise condensation can be enhanced by superhydrophobic surfaces, on which the condensate drops spontaneously jump upon coalescence. However, the self-propelled jumping in prior reports is mostly perpendicular to the substrate. Here, we propose a substrate design with regularly spaced micropillars. Coalescence on the sidewalls of the micropillars leads to self-propelled jumping in a direction nearly orthogonal to the pillars and therefore parallel to the substrate. This in- plane motion in turn produces sweeping removal of multiple neighboring drops. The spontaneous sweeping mechanism may greatly enhance dropwise condensation in a self-sustained manner.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗